Antibiotic-loaded amphora-shaped pores on a titanium implant surface enhance osteointegration and prevent infections.

Artificial prostheses for joint replacement are indispensable in orthopedic surgery. Unfortunately, the implanted surface is attractive to not only host cells but also bacteria. To enable better osteointegration, a mechanically stable porous structure was created on a titanium surface using laser treatment and metallic silver particles were embedded in a hydrophilic titanium oxide layer on top. The laser structuring resulted in unique amphora-shaped pores. Due to their hydrophilic surface conditions and capillary forces, the pores can be loaded preoperative with the antibiotic of choice/need, such as gentamicin. Cytotoxicity and differentiation assays with primary human osteoblast-like cells revealed no negative effect of the surface modification with or without gentamicin loading. An in vivo biocompatibility study showed significantly enhanced osteointegration as measured by push-out testing and histomorphometry 56 days after the implantation of the K-wires into rat femora. Using a S. aureus infection model, the porous, silver-coated K-wires slightly reduced the signs of bone destruction, while the wires were still colonized after 28 days. Loading the amphora-shaped pores with gentamicin significantly reduced the histopathological signs of bone destruction and no bacteria were detected on the wires. Taken together, this novel surface modification can be applied to new or established orthopedic implants. It enables preoperative loading with the antibiotic of choice/need without further equipment or post-coating, and supports osteointegration without a negative effect of the released dug, such as gentamicin.

Impact of Laser Structuring on Medical-Grade Titanium: Surface Characterization and In Vitro Evaluation of Osteoblast Attachment.

Improved implant osteointegration offers meaningful potential for orthopedic, spinal, and dental implants. In this study, a laser treatment was used for the structuring of a titanium alloy (Ti6Al4V) surface combined with a titanium dioxide coating, whereby a porous surface was created. The objective was to characterize the pore structure shape, treatment-related metallographic changes, cytocompatibility, and attachment of osteoblast-like cells (MG-63). The treatment generated specific bottleneck pore shapes, offering the potential for the interlocking of osteoblasts within undercuts in the implant surface. The pore dimensions were a bottleneck diameter of 27 µm (SD: 4 µm), an inner pore width of 78 µm (SD: 6 µm), and a pore depth of 129 µm (SD: 8 µm). The introduced energy of the laser changed the metallic structure of the alloy within the heat-affected region (approximately 66 µm) without any indication of a micro cracking formation. The phase of the alloy (microcrystalline alpha + beta) was changed to a martensite alpha phase in the surface region and an alpha + beta phase in the transition region between the pores. The MG-63 cells adhered to the structured titanium surface within 30 min and grew with numerous filopodia over and into the pores over the following days. Cell viability was improved on the structured surface compared to pure titanium, indicating good cytocompatibility. In particular, the demonstrated affinity of MG-63 cells to grow into the pores offers the potential to provide significantly improved implant fixation in further in vivo studies.

Current State of Bone Adhesives-Necessities and Hurdles.

The vision of gluing two bone fragments with biodegradable and biocompatible adhesives remains highly fascinating and attractive to orthopedic surgeons. Possibly shorter operation times, better stabilization, lower infection rates, and unnecessary removal make this approach very appealing. After 30 years of research in this field, the first adhesive systems are now appearing in scientific reports that may fulfill the comprehensive requirements of bioadhesives for bone. For a successful introduction into clinical application, special requirements of the musculoskeletal system, challenges in the production of a bone adhesive, as well as regulatory hurdles still need to be overcome. In this article, we will give an overview of existing synthetic polymers, biomimetic, and bio-based adhesive approaches, review the regulatory hurdles they face, and discuss perspectives of how bone adhesives could be efficiently introduced into clinical application, including legal regulations.

Burst Release of Antibiotics Combined with Long-Term Release of Silver Targeting Implant-Associated Infections: Design, Characterization and in vitro Evaluation of Novel Implant Hybrid Surface.

Implant-associated infections represent a serious risk in human medicine and can lead to complications, revisions and in worst cases, amputations. To target these risks, the objective was to design a hybrid implant surface that allows a local burst release of antibiotics combined with long-term antimicrobial activity based on silver. The efficacy should be generated with simultaneous in vitro cytocompatibility. The investigations were performed on titanium K-wires and plates and gentamicin was selected as an illustrative antibiotic. A gentamicin depot (max 553 µg/cm2) was created on the surface using laser structuring. The antibiotic was released within 15 min in phosphate buffered saline (PBS) or agar medium. Metallic silver particles (4 µg/cm2) in a titanium dioxide layer were deposited using plasma vapor deposition (PVD). About 16% of the silver was released within 28 days in the agar medium. The local efficacy of the incorporated silver was demonstrated in a direct contact assay with a reduction of more than 99.99% (Escherichia coli). The local efficacy of the hybrid surface was confirmed in a zone of inhibition (ZOI) assay using Staphylococcus cohnii. The biocompatibility of the hybrid surface was proven using fibroblasts and osteoblasts as cell systems. The hybrid surface design seems to be promising as treatment of implant-associated infections, considering the achieved amount and release behavior of the active ingredients (gentamicin, silver). The generated in vitro results (efficacy, biocompatibility) proofed the concept. Further in vivo studies will be necessary translate the hybrid surface towards clinical applied research.

In-situ determination of time-dependent alginate-hydrogel formation by mechanical texture analysis.

Although alginate-based hydrogels are widely used, determining their mechanical properties and explaining their ability to form a hydrogel in situ remains a challenge. A new method of external gelation using calcium chloride (CaCl2) is proposed to quantify the formation of alginate hydrogel and its mechanical properties as well as to observe its temporal behaviour. To this end, small inhomogeneous alginate beads were formed, which comprised a shell and a core. The bead's shell consisted of calcium alginate hydrogel, while its core was sodium alginate sol. The beads were mechanically tested with a texture analyser to provide a detailed description of the structure. Different alginate samples could be clearly identified, and the M(mannuron)/G(guluron) acid ratios could be extrapolated quickly and easily from the test results if calibrated by NMR. This enables a fast and cost-effective characterisation of different alginates with regard to their composition and gel formation properties.

Viability and biocompatibility of an adhesive system for intrarenal embedding and endoscopic removal of small residual fragments in minimally-invasive stone treatment in an in vivo pig model.

PURPOSE: To evaluate the viability and biocompatibility of a novel, patented bioadhesive system for intrarenal embedding and retrieval of residual fragments after endoscopic lithotripsy. Complete stone clearance via active removal of residual fragments (RF) after intracorporeal laser lithotripsy may be time-consuming and fail in many cases. Therefore, the novel adhesive has been developed and evaluated for the first time in an in vivo pig model in the present work. METHODS: Four female domestic pigs underwent flexible ureteroscopy (RIRS) or percutaneous nephrolithotomy (PNL) under general anesthesia (8 kidneys, 4 × RIRS, 4 × PNL) evaluating the bioadhesive system. INTERVENTIONS: RIRS without adhesive system (sham procedure, kidney I); 3 × RIRS using the bioadhesive system (kidneys II-IV); and 4 × PNL using the bioadhesive system (V-VIII). We endoscopically inserted standardized human stone probes followed by comminution using Ho:YAG lithotripsy. The bioadhesive (kidney II-VIII) was then applied and the adhesive-stone fragment complex extracted. After nephrectomy, all kidneys were evaluated by two independent, blinded pathologists. Endpoints were the procedure's safety and adhesive system's biocompatibility. RESULTS: We observed no substantial toxic effects. We were able to embed and remove 80-90% of fragments. However, because of the pig's hampering pyelocaliceal anatomy, a quantified, proportional assessment of the embedded fragments was compromised. CONCLUSIONS: For the first time, we demonstrated the proven feasibility and safety of this novel bioadhesive system for embedding and endoscopically removing small RF in conjunction with a lack of organ toxicity in vivo.

Chemical characterization of the adhesive secretions of the salamander Plethodon shermani (Caudata, Plethodontidae).

Salamanders have developed a wide variety of antipredator mechanisms, including tail autotomy, colour patterns, and noxious skin secretions. As an addition to these tactics, the red-legged salamander (Plethodon shermani) uses adhesive secretions as part of its defensive strategy. The high bonding strength, the fast-curing nature, and the composition of the biobased materials makes salamander adhesives interesting for practical applications in the medical sector. To understand the adhesive secretions of P. shermani, its components were chemically analysed by energy dispersive X-ray spectroscopy (EDX), inductively coupled plasma mass spectrometry (ICP-MS), amino acid analysis, and spectroscopy (ATR-IR, Raman). In addition, proteins were separated by gel-electrophoresis and selected spots were characterised by peptide mass fingerprinting. The salamander secretion contains a high amount of water and predominantly proteins (around 77% in the dry stage). The gel-electrophoresis and peptide mass fingerprint analyses revealed a de novo set of peptides/proteins, largely with a pI between 5.0 and 8.0 and a molecular mass distribution between 10 and 170 kDa. Only low homologies with other proteins present in known databases could be identified. The results indicate that the secretions of the salamander Plethodon clearly differ chemically from those shown for other glue-producing terrestrial or marine species and thus represent a unique glue system.

Salamanders on the bench - A biocompatibility study of salamander skin secretions in cell cultures.

Salamanders have evolved a wide variety of antipredator mechanisms and behavior patterns, including toxins and noxious or adhesive skin secretions. The high bonding strength of the natural bioadhesives makes these substances interesting for biomimetic research and applications in industrial and medical sectors. Secretions of toxic species may help to understand the direct effect of harmful substances on the cellular level. In the present study, the biocompatibility of adhesive secretions from four salamander species (Plethodon shermani, Plethodon glutinosus, Ambystoma maculatum, Ambystoma opacum) were analyzed using the MTT assay in cell culture and evaluated against toxic secretions of Pleurodeles waltl, Triturus carnifex, Pseudotriton ruber, Tylototriton verrucosus, and Salamandra salamandra. Their effect on cells was tested in direct contact (direct culture) or under the influence of the extract (indirect exposure) in accordance with the protocol of the international standard norm ISO 10993-5. Human dermal fibroblasts (NHDF), umbilical vein endothelial cells (HUVEC), and articular chondrocytes (HAC), as well as the cell lines C2C12 and L929 were used in both culture types. While the adhesive secretions from Plethodon shermani are cytocompatible and those of Ambystoma opacum are even advantageous, those of Plethodon glutinosus and Ambystoma maculatum appear to be cytotoxic to NDHF and HUVEC. Toxic secretions from Salamandra salamandra exhibited harmful effects on all cell types. Pseudotriton ruber and Triturus carnifex secretions affected certain cell types marginally; those from Pleurodeles waltl and Tylototriton verrucosus were generally well tolerated. The study shows for the first time the effect of salamander secretions on the viability of different cell types in culture. Two adhesive secretions appeared to be cell compatible and are therefore promising candidates for future investigations in the field of medical bioadhesives. Among the toxic secretions tested, only two of the five had a harmful effect on cells, indicating different cell toxicity mechanisms.

New for Old-Coagulum Lithotomy vs a Novel Bioadhesive for Complete Removal of Stone Fragments in a Comparative Study in an Ex Vivo Porcine Model.

OBJECTIVES: To evaluate a recently reported new bioadhesive system for the retrieval of small residual fragments (RFs) after intracorporeal lithotripsy, we systematically compared this system with coagulum lithotomy in retrograde intrarenal surgery. MATERIALS AND METHODS: We extracted 30 human stone fragments (≤1 mm) in an ex vivo porcine kidney model using a flexible ureteroscope for three groups: (1) the novel bioadhesive, (2) autologous blood as a natural adhesive, and (3) (control group) a conventional retrieval basket. Each group consisted of 15 test runs. Outcomes were evaluated regarding the macroscopic stone-free rate (SFR), retrieval time, and number of ureteral passages. RESULTS: For groups 1 and 2, a significant advantage in stone clearance, mean retrieval time, and number of retrievals was detected compared to the control group (p = 0.001). The time and number of retrievals were significantly lower in group 1 (10:36 minutes, p = 0.001) than in group 2 (26:12 minutes, p = 0.001), with shorter clotting time and better visibility. CONCLUSIONS: These data show the general feasibility of intrarenal RF embedding to improve the SFR. Our data furthermore suggest the superiority of the artificial bioadhesive embedding agent over the application of native blood. Further in vivo studies and other research are necessary to confirm the adhesive's effect in patients.

Characterization of the Fishing Lines in Titiwai (=Arachnocampa luminosa Skuse, 1890) from New Zealand and Australia.

Animals use adhesive secretions in a plethora of ways, either for attachment, egg anchorage, mating or as either active or passive defence. The most interesting function, however, is the use of adhesive threads to capture prey, as the bonding must be performed within milliseconds and under unsuitable conditions (movement of prey, variable environmental conditions, unfavourable attack angle, etc.) to be nonetheless successful. In the following study a detailed characterization of the prey capture system of the world-renowned glowworm group Arachnocampa from the macroscopic to the ultrastructural level is performed. The data reveal that the adhesive droplets consist mostly of water and display hygroscopic properties at varying humidity levels. The droplet core of Arachnocampa luminosa includes a certain amount of the elements sodium, sulphur and potassium (beside carbon, oxygen and nitrogen), while a different element composition is found in the two related species A. richardsae and A. tasmaniensis. Evidence for lipids, carbohydrates and proteins was negative on the histochemical level, however X-ray photoelectron spectroscopy confirm the presence of peptides within the droplet content. Different to earlier assumptions, the present study indicates that rather than oxalic acid, urea or uric acid are present in the adhesive droplets, presumably originating from the gut. Comparing the capture system in Arachnocampa with those of orb-spiders, large differences appear not only regarding the silky threads, but also, in the composition, hygroscopic properties and size of the mucous droplets.

Novel Biocompatible Adhesive for Intrarenal Embedding and Endoscopic Removal of Small Residual Fragments after Minimally Invasive Stone Treatment in an Ex Vivo Porcine Kidney Model: Initial Evaluation of a Prototype.

PURPOSE: Residual fragments related to endoscopic intracorporeal lithotripsy are a challenging problem. The impact of residual fragments remains a subject of discussion and growing evidence highlights that they have a central role in recurrent stone formation. Therefore, we developed a novel bioadhesive system for intrarenal embedding and retrieval of residual fragments after endoscopic lithotripsy in an ex vivo porcine kidney model. MATERIALS AND METHODS: In a standardized setting 30 human stone fragments 1 mm or less were inserted in the lower pole of an ex vivo porcine kidney model. We assessed the extraction efficacy of flexible ureteroscopy using the bioadhesive system in 15 preparations and a conventional retrieval basket in 15. Outcomes were compared regarding the endoscopic and macroscopic stone-free rate, and overall time of retrieval. RESULTS: Embedding and retrieving the residual fragment-bioadhesive complex were feasible in all trial runs. We observed no adverse effects such as adhesions between the adhesive and the renal collecting system or the instruments used. The stone-free rate was 100% and 60% in the bioadhesive and conventional retrieval groups, respectively (p = 0.017). Mean retrieval time was significantly shorter at 10 minutes 33 seconds vs 36 minutes 56 seconds in the bioadhesive group vs the conventional group (p = 0.001). CONCLUSIONS: This novel method involving adhesive based complete removal of residual fragments from the collecting system has proved to be feasible. Our evaluation in a porcine kidney model revealed that this technology performed well. Further tests, including inpatient studies, are required to thoroughly evaluate the benefit and potential drawbacks of bioadhesive based extraction of residual fragments after intracorporeal lithotripsy.

Morphological characterization of the glandular system in the salamander Plethodon shermani (Caudata, Plethodontidae).

Amphibians have evolved a wide variety of mechanisms that provide a certain degree of protection against predators, including camouflage, tail autonomy, encounter behavior and noxious or toxic skin secretions. In addition to these strategies, some amphibians release a glue-like secretion onto the surface of their skin when threatened. While some information regarding the origin and production of these adhesive secretions is available for frogs such as Notaden bennetti, these aspects are only partially understood in salamanders. We contribute to an earlier study and provide additional information regarding the origin, production, and characterization of the adhesive secretion in the red-legged salamander (Plethodon shermani) at a microanatomical level. When stressed, this salamander secretes a milky, viscous liquid from its dorsal and ventral skin. This secretion is extremely adhesive and hardens within seconds upon exposure to air. This study describes two cutaneous gland types (mucous and granular) in the dorsal and ventral epithelial tissue that differ considerably in their secretory content. While the smaller mucous glands contains flocculent to granular material, mostly acidic glycoproteins, the granular glands synthesize various granules of differing size and density that consist of basic proteinaceous material. The results strongly indicate that the secretions of both gland types from the dorsal as well as the ventral side form the adhesive mucus in Plethodon shermani, consisting of basic and acidic glycoproteins, glycoconjugates with mannose and α-L-fucose residues as well as lipid components.

The chemistry of stalked barnacle adhesive (Lepas anatifera).

The results of the first chemical analysis of the adhesive of Lepas anatifera, a stalked barnacle, are presented. A variety of elements were identified in scanning electron microscopy with energy dispersive spectrometry (SEM-EDS) of the adhesive, including Na, Mg, Ca, Cl, S, Al, Si, K and Fe; however, protein-metal interactions were not detected in Raman spectra of the adhesive. Elemental signatures from SEM-EDS of L. anatifera adhesive glands were less varied. Phosphorous was mostly absent in adhesive samples; supporting previous studies showing that phosphoserines do not play a significant role in adult barnacle adhesion. Disulfide bridges arising from Cys dimers were also investigated; Raman analysis showed weak evidence for S-S bonds in L. anatifera. In addition, there was no calcium carbonate signal in the attenuated total reflectance Fourier transform infrared spectra of L. anatifera adhesive, unlike several previous studies in other barnacle species. Significant differences were observed between the Raman spectra of L. anatifera and Balanus crenatus; these and a range of Raman peaks in the L. anatifera adhesive are discussed. Polysaccharide was detected in L. anatifera adhesive but the significance of this awaits further experiments. The results demonstrate some of the diversity within barnacle species in the chemistry of their adhesives.

Adhesive proteins of stalked and acorn barnacles display homology with low sequence similarities.

Barnacle adhesion underwater is an important phenomenon to understand for the prevention of biofouling and potential biotechnological innovations, yet so far, identifying what makes barnacle glue proteins 'sticky' has proved elusive. Examination of a broad range of species within the barnacles may be instructive to identify conserved adhesive domains. We add to extensive information from the acorn barnacles (order Sessilia) by providing the first protein analysis of a stalked barnacle adhesive, Lepas anatifera (order Lepadiformes). It was possible to separate the L. anatifera adhesive into at least 10 protein bands using SDS-PAGE. Intense bands were present at approximately 30, 70, 90 and 110 kilodaltons (kDa). Mass spectrometry for protein identification was followed by de novo sequencing which detected 52 peptides of 7-16 amino acids in length. None of the peptides matched published or unpublished transcriptome sequences, but some amino acid sequence similarity was apparent between L. anatifera and closely-related Dosima fascicularis. Antibodies against two acorn barnacle proteins (ab-cp-52k and ab-cp-68k) showed cross-reactivity in the adhesive glands of L. anatifera. We also analysed the similarity of adhesive proteins across several barnacle taxa, including Pollicipes pollicipes (a stalked barnacle in the order Scalpelliformes). Sequence alignment of published expressed sequence tags clearly indicated that P. pollicipes possesses homologues for the 19 kDa and 100 kDa proteins in acorn barnacles. Homology aside, sequence similarity in amino acid and gene sequences tended to decline as taxonomic distance increased, with minimum similarities of 18-26%, depending on the gene. The results indicate that some adhesive proteins (e.g. 100 kDa) are more conserved within barnacles than others (20 kDa).

Biochemical analyses of the cement float of the goose barnacle Dosima fascicularis--a preliminary study.

The goose barnacle Dosima fascicularis produces an excessive amount of adhesive (cement), which has a double function, being used for attachment to various substrata and also as a float (buoy). This paper focuses on the chemical composition of the cement, which has a water content of 92%. Scanning electron microscopy with EDX was used to measure the organic elements C, O and N in the foam-like cement. Vibrational spectroscopy (FTIR, Raman) provided further information about the overall secondary structure, which tended towards a ß-sheet. Disulphide bonds could not be detected by Raman spectroscopy. The cystine, methionine, histidine and tryptophan contents were each below 1% in the cement. Analyses of the cement revealed a protein content of 84% and a total carbohydrate content of 1.5% in the dry cement. The amino acid composition, 1D/2D-PAGE and MS/MS sequence analysis revealed a de novo set of peptides/proteins with low homologies with other proteins such as the barnacle cement proteins, largely with an acidic pI between 3.5 and 6.0. The biochemical composition of the cement of D. fascicularis is similar to that of other barnacles, but it shows interesting variations.

Mussel-inspired dendritic polymers as universal multifunctional coatings.

A rapid and universal approach for multifunctional material coatings was developed based on a mussel-inspired dendritic polymer. This new kind of polymer mimics not only the functional groups of mussel foot proteins (mfps) but also their molecular weight and molecular structure. The large number of catechol and amine groups set the basis for heteromultivalent anchoring and crosslinking. The molecular weight reaches 10 kDa, which is similar to the most adhesive mussel foot protein mfp-5. Also, the dendritic structure exposes its functional groups on the surface like the folded proteins. As a result, a very stable coating can be prepared on virtually any type of material surface within 10 min by a simple dip-coating method, which is as fast as the formation of mussel byssal threads in nature.

Multivalent anchored and crosslinked hyperbranched polyglycerol monolayers as antifouling coating for titanium oxide surfaces.

A set of new catecholic monolayer coatings was developed to improve the antifouling performance of TiO2 surfaces. To solve the problem of the weak charge-transfer interaction between a single catechol anchor and TiO2, multiple catechol groups were combined with hyperbranched polyglycerol (hPG) which is a distinct dendritic scaffold that exposes its multivalent anchor groups on the surface. Thus, multivalent catecholic hPGs can be easily prepared for surface modification. The immobilization of the compounds was monitored by quartz crystal microbalance with dissipation monitoring. Surface properties of the coatings were analyzed by water contact angle, X-ray photoelectron spectroscopy, and atomic force microscopy. The antifouling ability and stability were investigated by protein adsorption and cell adhesion. By increasing the number of catechol groups on the hPG scaffold, the stability and surface coverage could be significantly enhanced. Moreover, the inner-layer crosslinking of the coatings by grafting and initiating vinyl groups clearly improved their long-term stability. As a result, hPG with a catecholic functional degree of 10% (hPG-Cat10) and hPG with both catecholic and vinylic functional degree of 5% (hPG-Cat5-V5) were identified as the best catecholic hPGs to prepare bioinert and stable monolayer coatings on TiO2.

Multivalent anchoring and cross-linking of mussel-inspired antifouling surface coatings.

In this work, we combine nature's amazing bioadhesive catechol with the excellent bioinert synthetic macromolecule hyperbranched polyglycerol (hPG) to prepare antifouling surfaces. hPG can be functionalized by different amounts of catechol groups for multivalent anchoring and cross-linking because of its highly branched architecture. The catecholic hPGs can be immobilized on various surfaces including metal oxides, noble metals, ceramics, and polymers via simple incubation procedures. The effect of the catechol amount on the immobilization, surface morphology, stability, and antifouling performance of the coatings was studied. Both anchoring and cross-linking interactions provided by catechols can enhance the stability of the coatings. When the catechol groups on the hPG are underrepresented, the tethering of the coating is not effective; while an overrepresentation of catechol groups leads to protein adsorption and cell adhesion. Thus, only a well-balanced amount of catechols as optimized and described in this work can supply the coatings with both good stability and antifouling ability.

Splice variants of perlucin from Haliotis laevigata modulate the crystallisation of CaCO3.

Perlucin is one of the proteins of the organic matrix of nacre (mother of pearl) playing an important role in biomineralisation. This nacreous layer can be predominately found in the mollusc lineages and is most intensively studied as a compound of the shell of the marine Australian abalone Haliotis laevigata. A more detailed analysis of Perlucin will elucidate some of the still unknown processes in the complex interplay of the organic/inorganic compounds involved in the formation of nacre as a very interesting composite material not only from a life science-based point of view. Within this study we discovered three unknown Perlucin splice variants of the Australian abalone H. laevigata. The amplified cDNAs vary from 562 to 815 base pairs and the resulting translation products differ predominantly in the absence or presence of a varying number of a 10 mer peptide C-terminal repeat. The splice variants could further be confirmed by matrix-assisted laser desorption ionisation time of flight mass spectrometry (MALDI-ToF MS) analysis as endogenous Perlucin, purified from decalcified abalone shell. Interestingly, we observed that the different variants expressed as maltose-binding protein (MBP) fusion proteins in E. coli showed strong differences in their influence on precipitating CaCO3 and that these differences might be due to a splice variant-specific formation of large protein aggregates influenced by the number of the 10 mer peptide repeats. Our results are evidence for a more complex situation with respect to Perlucin functional regulation by demonstrating that Perlucin splice variants modulate the crystallisation of calcium carbonate. The identification of differentially behaving Perlucin variants may open a completely new perspective for the field of nacre biomineralisation.

A universal approach to crosslinked hierarchical polymer multilayers as stable and highly effective antifouling coatings.

Material-independent and bioinert hierarchical polymer multilayer coatings are presented. Chemically active catecholic hyperbranched polyglycerols (hPGs) form a foundation layer on a versatile surface via multivalent anchoring and crosslinking, the activity of which is shielded by the bioinert catecholic hPGs. Mono-catecholic hPGs finally terminate all of the free catechols to build a flexible bioinert top layer. These coatings perfectly prevent protein and cell adhesion.