Magnetic Titanium Dioxide Nanocomposites as a Recyclable SERRS Substrate for the Ultrasensitive Detection of Histidine.

A highly sensitive, selective and recyclable histidine detection method based on magnetic Fe3O4@mTiO2 (M-TiO2) nanocomposites with SERRS was developed. Mesoporous M-TiO2 nanoparticles were functionalized with 4-aminothiophenol and then coupled with histidine through an azo coupling reaction in 5 min, producing the corresponding azo compound. The strong and specific SERRS response of the azo product allowed for ultrasensitive and selective detection for histidine with an M-TiO2 device loaded with Ag NPs due to the molecular resonance effect and plasmonic effect of Ag NPs under a 532 nm excitation laser. The sensitivity was further enhanced with the magnetic enrichment of M-TiO2. The limit of detection (LOD) was as low as 8.00 × 10-12 mol/L. The M-TiO2 demonstrated applicability towards histidine determination in human urine without any sample pretreatment. Additionally, the M-TiO2 device can be recycled for 3 cycles with the photodegradation of the azo product under UV irradiation due to TiO2-assisted and plasmon-enhanced photocatalysis. In summary, a multifunctional and recyclable M-TiO2 device was synthesized based on azo coupling and SERRS spectroscopy for ultra-sensitive and specific histidine sensing. In addition, the proposed system demonstrated the potential for the multiplex determination of toxic compounds in the fields of food safety, industrial production and environmental protection, which benefit from the fingerprint property and universality of SERRS.

Advances in Nano-Functional Materials in Targeted Thrombolytic Drug Delivery.

Thrombotic disease has been listed as the third most fatal vascular disease in the world. After decades of development, clinical thrombolytic drugs still cannot avoid the occurrence of adverse reactions such as bleeding. A number of studies have shown that the application of various nano-functional materials in thrombus-targeted drug delivery, combined with external stimuli, such as magnetic, near-infrared light, ultrasound, etc., enrich the drugs in the thrombus site and use the properties of nano-functional materials for collaborative thrombolysis, which can effectively reduce adverse reactions such as bleeding and improve thrombolysis efficiency. In this paper, the research progress of organic nanomaterials, inorganic nanomaterials, and biomimetic nanomaterials for drug delivery is briefly reviewed.

The Graphene Quantum Dots Gated Nanoplatform for Photothermal-Enhanced Synergetic Tumor Therapy.

Currently, the obvious side effects of anti-tumor drugs, premature drug release, and low tumor penetration of nanoparticles have largely reduced the therapeutic effects of chemotherapy. A drug delivery vehicle (MCN-SS-GQDs) was designed innovatively. For this, the mesoporous carbon nanoparticles (MCN) with the capabilities of superior photothermal conversion efficiency and high loading efficiency were used as the skeleton structure, and graphene quantum dots (GQDs) were gated on the mesopores via disulfide bonds. The doxorubicin (DOX) was used to evaluate the pH-, GSH-, and NIR-responsive release performances of DOX/MCN-SS-GQDs. The disulfide bonds of MCN-SS-GQDs can be ruptured under high glutathione concentration in the tumor microenvironment, inducing the responsive release of DOX and the detachment of GQDs. The local temperature of a tumor increases significantly through the photothermal conversion of double carbon materials (MCN and GQDs) under near-infrared light irradiation. Local hyperthermia can promote tumor cell apoptosis, accelerate the release of drugs, and increase the sensitivity of tumor cells to chemotherapy, thus increasing treatment effect. At the same time, the detached GQDs can take advantage of their extremely small size (5-10 nm) to penetrate deeply into tumor tissues, solving the problem of low permeability of traditional nanoparticles. By utilizing the photothermal properties of GQDs, synergistic photothermal conversion between GQDs and MCN was realized for the purpose of synergistic photothermal treatment of superficial and deep tumor tissues.

Triphenylphosphonium-linked derivative of hecogenin with enhanced antiproliferative activity: Design, synthesis, and biological evaluation.

Hecogenin (HCG), a steroidal sapogenin, possesses good antitumor properties. However, the application of HCG for cancer treatment has been hindered primarily by its moderate potency. In this study, we incorporated triphenylphosphonium cation (TPP+) at the C-3 and C-12 positions through different lengths of alkyl chains to target mitochondria and enhance the efficacy and selectivity of the parent compound. Cytotoxicity screening revealed that most of the target compounds exhibited potent antiproliferative activity against five human cancer cell lines (MKN45, A549, HCT-116, MCF-7, and HepG2). Structure-activity relationship studies indicated that the TPP+ group significantly enhanced the antiproliferative potency of HCG. Among these compounds, 3c demonstrated remarkable potency against MKN45 cells with an IC50 value of 0.48 µM, significantly more effective than its parent compound HCG (IC50 > 100 µM). Further investigations into the mechanism of action revealed that 3c induced apoptosis of MKN45 cells through the mitochondrial pathway. In a zebrafish xenograft model, 3c inhibited the proliferation of MKN45 cells. Overall, these results suggest that 3c, with potent antiproliferative activity, may serve as a valuable scaffold for developing new antitumor agents.

Ganoderma lucidum polysaccharide hydrogel accelerates diabetic wound healing by regulating macrophage polarization.

Impaired macrophage polarization or the high levels of reactive oxygen species (ROS) produced by high glucose conditions and bacterial infection are the primary factors that make healing diabetic wounds difficult. Here, we prepared an OGLP-CMC/SA hydrogel with a double network structure that was synthesized with oxidized Ganoderma lucidum polysaccharide (OGLP), sodium alginate (SA) and carboxymethyl chitosan (CMC) as the matrix. The results showed that the OGLP-CMC/SA hydrogel had good mechanical properties, tissue adhesion, oxidation resistance and biocompatibility. Moreover, the hydrogel could effectively improve the proliferation and migration of fibroblasts, also can enhance antibacterial properties. We found that the OGLP-CMC/SA hydrogel can promote the polarization of M1 macrophages towards the M2 and decrease intracellular ROS levels, effectively reduce the inflammatory response, and promote epidermal growth, the development of skin appendages and collagen deposition in wounds, which hasten diabetic wound healing. Therefore, using this versatile biologically active new hydrogel network constructed with OGLP provides a promising therapeutic strategy for chronic diabetic wound repair.

Preparation of Lamivudinyl palmitate nanoemulsome for liver-targeting delivery.

The water solubility and side effects of lamivudine limit its application for the treatment of viral hepatitis type B and human immunodeficiency virus. In order to increase the solubility of LA and improve the in vivo membrane permeability of the drug, LA was modified with hexadecane acid to prepare the prodrug lamivudine palmitic acid (LAP) and loaded into nanoemulsome (NES). LAP-NES was prepared by the thin film dispersion method. The LAP-NES showed the sustained release performance up to 72h in pH 7.4 PBS. Moreover, the pharmacokinetics of LAP-NES after tail vein injection in rats and the biodistribution characteristics were evaluated. The tmax of LAP-NES was 2.5h. The t1/2, clearance rate and average retention time of LAP-NES obviously prolonged compared with free LAP. The tissue biodistribution behavior of NES in vivo showed the good targeting in the liver and spleen, with the maximum at 4h and then the fluorescence slowly decreased until 72h. LAP-NES could significantly delay the release of LA in vivo, effectively prolong the elimination time and had obvious liver-targeting ability. In summary, LAP-NES shows great potential for liver-targeting delivery to increase the therapeutic effect and decrease the side effects of LA.

Combination immunotherapy of PEG-modified preladenant thermosensitive liposomes and PD-1 inhibitor effectively enhances the anti-tumor immune response and therapeutic effects.

Immunotherapy is a promising cancer treatment strategy. In contrast, programmed cell death 1 (PD-1)/programmed cell death ligand 1 (PD-L1) inhibitors are associated with low response rates and are only useful in a small group of cancer patients. A combination of treatments may be effective for overcoming this clinical issue. Preladenant is an adenosine (ADO) receptor inhibitor that can block the ADO pathway and improve the tumor microenvironment (TME), thereby enhancing the immunotherapeutic effect of PD-1 inhibitors. However, its poor water solubility and low targeting limit its clinical applications. We designed a PEG-modified thermosensitive-liposome (pTSL) loaded with ADO small molecule inhibitor preladenant (P-pTSL) to overcome these problems and enhance the effect of PD-1 inhibitor on breast cancer immunotherapy. The prepared P-pTSL was round and uniformly distributed with a particle size of (138.9 ± 1.22) nm, PDI: 0.134 ± 0.031, and zeta potential (-10.1 ± 1.63) mV; preladenant was released slowly at 37 °C but released fast at 42 °C from P-pTSL, which was 76.52 ± 0.44%. P-pTSL has good long-term and serum stability and excellent tumor-targeting ability in mice. Moreover, the combination with PD-1 inhibitor significantly enhanced the anti-tumor effect, and the improvement of related factors in serum and lymph was more obvious under the condition of 42 °C thermotherapy in vitro.

Biomimetic Antidote Nanoparticles: a Novel Strategy for Chronic Heavy Metal Poisoning.

Chronic lead poisoning has become a major factor in global public health. Chelation therapy is usually used to manage lead poisoning. Dimercaptosuccinic acid (DMSA) is a widely used heavy metal chelation agent. However, DMSA has the characteristics of poor water solubility, low oral bioavailability, and short half-life, which limit its clinical application. Herein, a long-cycle slow-release nanodrug delivery system was constructed. We successfully coated the red blood cell membrane (RBCM) onto the surface of dimercaptosuccinic acid polylactic acid glycolic acid copolymer (PLGA) nanoparticles (RBCM-DMSA-NPs), which have a long cycle and detoxification capabilities. The NPs were characterized and observed by particle size meters and transmission electron microscopy. The results showed that the particle size of RBCM-DMSA-NPs was approximately 146.66 ± 2.41 nm, and the zeta potential was - 15.34 ± 1.60 mV. The homogeneous spherical shape and clear core-shell structure of the bionic nanoparticles were observed by transmission electron microscopy. In the animal tests, the area under the administration time curve of RBCM-DMSA-NPs was 156.52 ± 2.63 (mg/L·h), which was 5.21-fold and 2.36-fold that of free DMSA and DMSA-NPs, respectively. Furthermore, the median survival of the RBCM-DMSA-NP treatment group (47 days) was 3.61-fold, 1.32-fold, and 1.16-fold for the lead poisoning group, free DMSA, and DMSA-NP groups, respectively. The RBCM-DMSA-NP treatment significantly extended the cycle time of the drug in the body and improved the survival rate of mice with chronic lead poisoning. Histological analyses showed that RBCM-DMSA-NPs did not cause significant systemic toxicity. These results indicated that RBCM-DMSA-NPs could be a potential candidate for long-term chronic lead exposure treatment.

Rapid Limit Test of Seven Pesticide Residues in Tea Based on the Combination of TLC and Raman Imaging Microscopy.

Numerous studies have shown that pesticide residues in tea exceeding the maximum residue limits (MRL) can cause harmful effects on the human body. There are many limitations in the existing analytical methods for pesticide residues in tea, so new analytical methods need to be developed. We developed a limit test method that combines thin-layer chromatography with Raman imaging microscopy (TLC-RIM). Seven residual pesticide components in tea (Avermectin, Methomyl, Carbendazim, Imidacloprid, Chlorothalonil, Azoxystrobin, and Acetamiprid) could be preliminarily separated by TLC and then irradiated by a 532 nm laser. Raman spectra of seven pesticides obtained by Raman imaging microscopy could be used to test whether the pesticide residues in tea exceed the MRL. The limits of detection of the seven pesticides were 0.04, 0.10, 0.24, 0.20, 0.12, 0.12, and 1.0 mg/mL, respectively. The simulated positive test showed that the matrix in tea did not interfere with the test of the seven pesticides. When the pesticides were tested within 8 h, the RSD of the peak heights of the seven pesticides were 1.2%~9.6%; the test results of three batches of tea showed that the imidacloprid in one batch of tea exceeded its MRL, and the results were consistent with that by UPLC-MS/MS. The TLC-RIM is fast, sensitive, stable, specific, and reliable.

Combined Strategy of Wound Healing Using Thermo-Sensitive PNIPAAm Hydrogel and CS/PVA Membranes: Development and In-Vivo Evaluation.

Past studies have shown that the hot spring effect can promote wound healing. Mild thermal stimulation and metal ions can promote angiogenesis. In this study, the hot spring effect was simulated by thermosensitive PNIPAAm hydrogel loaded with copper sulfide nanoparticles. Heat stimulation could be generated through near-infrared irradiation, and copper ions solution could be pulsed. On the other hand, the CS/PVA nanofiber membrane was attached to the bottom of the hydrogel to simulate the extracellular matrix structure, thus improving the wound healing ability. The CS/PVA nanofiber membrane was prepared by electrospinning, and the appropriate prescription and process parameters were determined. The nanofiber membrane has uniform pore size, good water absorption and permeability. The poor mechanical properties of PNIPAAm hydrogel were improved by adding inorganic clay. The temperature of the hydrogel loaded with CuS nanoparticles reached 40 °C under near-infrared light irradiation for 20 min, and the release rate of Cu2+ reached 26.89%. The wound-healing rate of the rats in the combined application group reached 79.17% at 13 days, demonstrating superior results over the other control groups. Histological analyses show improved inflammatory response at the healed wound area. These results indicate that this combined application approach represents a promising wound treatment strategy.

Versatile CRISPR-Cas12a-Based Biosensing Platform Modulated with Programmable Entropy-Driven Dynamic DNA Networks.

In addition to their roles as revolutionary genome engineering tools, CRISPR-Cas systems are also highly promising candidates in the construction of biosensing systems and diagnostic devices, which have attracted significant attention recently. However, the CRISPR-Cas system cannot be directly applied in the sensing of non-nucleic acid targets, and the needs of synthesizing and storing different vulnerable guide RNA for different targets also increase the application and storage costs of relevant biosensing systems, and therefore restrict their widespread applications. To tackle these barriers, in this work, a versatile CRISPR-Cas12a-based biosensing platform was developed through the introduction of an enzyme-free and robust DNA reaction network, the entropy-driven dynamic DNA network. By programming the sequences of the system, the entropy-driven catalysis-based dynamic DNA network can respond to different types of targets, such as nucleic acids or proteins, and then activate the CRISPR-Cas12a to generate amplified signals. As a proof of concept, both nucleic acid targets (a DNA target with random sequence, T, and an RNA target, microRNA-21 (miR-21)) and a non-nucleic acid target (a protein target, thrombin) were chosen as model analytes to address the feasibility of the designed sensing platform, with detection limits at the pM level for the nucleic acid analytes (7.4 pM for the DNA target T and 25.5 pM for miR-21) and 0.4 nM for thrombin. In addition, the detection of miR-21 or thrombin in human serum samples further demonstrated the applicability of the proposed biosensing platform in real sample analysis.

Novel biomimetic nanostructured lipid carriers for cancer therapy: preparation, characterization, and in vitro/in vivo evaluation.

Nanostructured lipid carriers (NLC) have become a research hotspot, wherein cancer-targeting effects are enhanced and side effects of chemotherapy are overcome. Usually, accelerated blood clearance (ABC) occurs after repeated injections, without changing the immunologic profile, despite PEGylation which prolongs the circulation function. To overcome these problems, we designed a red blood cell-membrane-coated NLC (RBCm-NLC), which was round-like, with a particle size of 60.33 ± 3.04 nm and a core-shell structure. Its stability was good, the drug paclitaxel (PTX) release from RBCm-PTX-NLC was less than 30% at pH7.4 and pH6.5, and the integrity of RBC membrane surface protein was maintained before and after preparation. Additionally, in vitro assays showed that, with the RBCm coating, the cellular uptake of the NLC by cancer cells was significantly enhanced. RBCm-NLC can avoid recognition by macrophage cells and prolong circulation time in vivo. In S180 tumor-bearing mice, the DiR-labeled RBCm-NLC group showed a stronger fluorescence signal and longer retention in tumor tissues, indicating a prompt tumor-targeting effect and extended blood circulation. Importantly, RBCm-PTX-NLC enhanced the antitumor effect and extended the survival period significantly in vivo. In summary, biomimetic NLC offered a novel strategy for drug delivery in cancer therapy.

Fluorescent Noble Metal Nanoclusters Loaded Protein Hydrogel Exhibiting Anti-Biofouling and Self-Healing Properties for Electrochemiluminescence Biosensing Applications.

Electrochemiluminescence (ECL) showed great potential in various analytical applications, especially in the sensing of biotargets, taking advantage of its high sensitivity, selectivity, ease of spatial and temporal control, and simplified optical setup. However, during the sensing of complex biological samples, ECL sensors often suffered severe interferences from unavoidable nonspecific-binding of biomacromolecules and physical damages of ECL sensing interfaces. Herein, a hydrogel based ECL biosensing system exhibiting excellent anti-biofouling and self-healing properties is developed. A protein hydrogel composed of bovine serum albumin (BSA) directed fluorescent Au/Ag alloy nanoclusters (Au/Ag NCs) is applied in building ECL sensing systems. The hydrogel matrix facilitates the immobilization of fluorescent Au/Ag NCs as excellent ECL probes, and the porous hydrophilic structure allows the free diffusion of small molecular biotargets while rejecting macromolecular interferences. Moreover, the hydrogel exhibits excellent self-healing property, with the ECL intensity recovered rapidly in 10 min after cutting. The hydrogel ECL system is successfully applied in sensing glutathione (GSH) in serum, confirming the applicability of the hydrogel based anti-biofouling ECL sensing system in sensing complex biological samples. This research may inspire the development of novel anti-biofouling and self-healing ECL biosensors for biosensing applications.

Chitosan-capped enzyme-responsive hollow mesoporous silica nanoplatforms for colon-specific drug delivery.

An enzyme-responsive colon-specific delivery system was developed based on hollow mesoporous silica spheres (HMSS) to which biodegradable chitosan (CS) was attached via cleavable azo bonds (HMSS-N=N-CS). Doxorubicin (DOX) was encapsulated in a noncrystalline state in the hollow cavity and mesopores of HMSS with the high loading amount of 35.2%. In vitro drug release proved that HMSS-N=N-CS/DOX performed enzyme-responsive drug release. The grafted CS could increase the biocompatibility and stability and reduce the protein adsorption on HMSS. Gastrointestinal mucosa irritation and cell cytotoxicity results indicated the good biocompatibility of HMSS and HMSS-N=N-CS. Cellular uptake results indicated that the uptake of DOX was obviously increased after HMSS-N=N-CS/DOX was preincubated with a colonic enzyme mixture. HMSS-N=N-CS/DOX incubated with colon enzymes showed increased cytotoxicity, and its IC50 value was three times lower than that of HMSS-N=N-CS/DOX group without colon enzymes. The present work lays the foundation for subsequent research on mesoporous carriers for oral colon-specific drug delivery.

Cancer cell membrane-coated mesoporous silica loaded with superparamagnetic ferroferric oxide and Paclitaxel for the combination of Chemo/Magnetocaloric therapy on MDA-MB-231 cells.

To effectively inhibit the growth of breast cancer cells (MDA-MB-231 cells) by the combination method of chemotherapy and magnetic hyperthermia, we fabricated a biomimetic drug delivery (CSiFePNs) system composed of mesoporous silica nanoparticles (MSNs) containing superparamagnetic ferroferric oxide and Paclitaxel (PTX) coated with MDA-MB-231 cell membranes (CMs). In the in vitro cytotoxicity tests, the MDA-MB-231 cells incubated with CSiFePNs obtained IC50 value of 0.8 µgL-1, 3.5-fold higher than that of SiFePNs. The combination method of chemotherapy and magnetic hyperthermia can effectively inhibit the growth of MDA-MB-231 cells.

Development and characteristics of novel sonosensitive liposomes for vincristine bitartrate.

The aim of drug delivery is to increase therapeutic efficacy. Externally triggered drug delivery systems enable site-specific and time-controlled drug release. To achieve this goal, our strategy was based on ultrasound-triggered release of an anticancer agent from sonosensitive liposomes (SL). To realize the ultrasound-triggered drug release, a lipophilic sonosensitizer, hematoporphyrin monomethyl ether (HMME) was incorporated into the lipid bilayer of liposomes. Once irradiated by the ultrasound in tumor tissues, the sonodynamic effect generated by HMME could lead to an efficient disruption of the lipid bilayer in the SL. After encapsulating vincristine bitartrate (VIN) as the model drug, the ultrasound-triggered lipid bilayer breakdown can trigger the instant release of VIN, enabling ultrasound-controlled chemotherapy with great specificity. In the in vitro and in vivo studies, by integrating tumor-specific targeting and stimuli-responsive controlled release into one system, VIN-loaded SL showed excellent antitumor efficacy. The SL could potentially produce viable clinical strategies for improved targeting efficiency of VIN for the treatment of related cancer. More importantly, this report provides an example of controlled release by means of a novel class of ultrasound triggering system.

In Vitro and In Vivo Evaluation of Core-Shell Mesoporous Silica as a Promising Water-Insoluble Drug Delivery System: Improving the Dissolution Rate and Bioavailability of Celecoxib With Needle-Like Crystallinity.

The objective of our study was to prepare mesoporous silica nanoparticles with a core-shell structure (CSMSNs) and improve the dissolution and bioavailability of celecoxib (Cxb), a water-insoluble drug, by changing its needle-like crystal form. CSMSNs are prepared by a core-shell segmentation self-assembly method. The SBET and Vt of CSMSNs were 890.65 m2/g and 1.23 cm3/g, respectively. Cxb was incorporated into CSMSNs by the solvent evaporation method. The gastrointestinal irritancy of the CSMSNs was evaluated by a gastric mucosa irritation test. In vitro dissolution and in vivo pharmacokinetic tests were carried out to study the improvement in the dissolution behavior and oral bioavailability of Cxb. In conclusion, gastric mucosa irritation study indicated the good biocompatibility of CSMSNs. The cumulative dissolution of CSMSNs-Cxb is 86.2% within 60 min in SIF solution, which may be ascribed to the crystal form change caused by control of the nanochannel for CSMSNs. Moreover, CSMSNs could enhance the 9.9-fold AUC of Cxb. The cumulative dissolution and bioavailability of Cxb were both significantly enhanced by CSMSNs. CSMSNs with a core-shell structure are suitable as a carrier for a poorly water-soluble drug (Cxb).

A Comparative Study of the Use of Mesoporous Carbon and Mesoporous Silica as Drug Carriers for Oral Delivery of the Water-Insoluble Drug Carvedilol.

Mesoporous carriers have been extensively applied to improve the dissolution velocity and bioavailability of insoluble drugs. The goal of this work was to compare the drug-loading efficiency (LE) and drug-dissolution properties of mesoporous silica nanoparticles (MSN) and mesoporous carbon nanoparticles (MCN) as drug vectors oral delivery of water-insoluble drugs. For this purpose, MSN and MCN with similar particle size, surface area, and mesoporous diameter were prepared to precisely evaluate the effects of different textures on the drug-loading and dissolution behavior of insoluble drugs. Carvedilol (CAR), a Bio-pharmaceutic Classification System (BCS) class II drug, was loaded in the MSN and MCN by the solvent adsorption method and solvent evaporation method with different carrier-drug ratios. The carboxylated MCN (MCN-COOH) had a higher LE for CAR than MSN for both the two loading methods due to the strong adsorption effect and π-π stacking force with CAR. In vitro drug dissolution study showed that both MSN and MCN-COOH could improve the dissolution rate of CAR compared with the micronized CAR. In comparison to MSN, MCN-COOH displayed a slightly slower dissolution profile, which may be ascribed to the strong interaction between MCN-COOH and CAR. Observation of cell cytotoxicity and gastrointestinal mucosa irritation demonstrated the good biocompatibility of both MSN and MCN-COOH. The present study encourages further research of different carriers to determine their potential application in oral administration.

Multi-walled carbon nanotube-based systems for improving the controlled release of insoluble drug dipyridamole.

Applicability of multi-walled carbon nanotubes (MWCNTs) in loading dipyridamole (DDM), a poorly soluble drug, was evaluated. Additionally, the effect of drug-loading efficiency on the release behavior of the MWCNT-DDM system was also investigated. DDM as a model drug was incorporated into MWCNTs with different drug-loading rates (10, 25 and 50%) using the solvent deposition method. The MWCNT-DDM system was successfully established and characterized using common solid-state characterization methods. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption analysis and Fourier transform-infrared (FT-IR) spectroscopy were carried out to observe the progress of drug loading. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) were used to systematically assess the crystalline state of the DDM after being loaded into the MWCNTs. Improvements in dissolution rate were evaluated by the dissolution test. The results revealed that with the increase of drug loading, the form of DDM in the MWCNTs changed from amorphous to crystalline state. Also, the release rate of DDM decreased upon increasing the drug-loading rate of carriers. In conclusion, MWCNTs are proven to be promising carriers for loading DDM.