Petroleum sludge formation and its treatment methodologies: a review.

Different petroleum operations produce huge amount of oil sludge annually. For instance, US EPA estimates the annual sludge production of each US refinery of 30,000 tons, while the average oily sludge produced from petrochemical industries in China is estimated about 3 million tons per year. In the last year, our center could recover about 30,206 barrels of raw oil from 32,786 barrels of tank bottom sludge (TBS) for different petroleum companies. This sludge causes huge economic losses besides its negative environmental impacts. The accumulation of sludge in the tanks results in reducing the tanks' capacity for storing liquid crude, accelerating the corrosion of the tanks, delay in the production schedule, and disturbing the whole production operation. There are diverse treatment methodologies such as solvent treatment, addition of certain chemicals, and centrifuging. Of course, the environmental regulations and the overall cost limitations are very important in deciding the preferred applicable method(s). Although several works handled the problem of sludge deposition and treatment from different aspects, we intend to introduce a different work. First, composition, formation, types, and properties of TBS were reviewed. Then, environmental and economic problems caused by TBS were revised. At last, different methodologies applied for treatment of oily TBS to recover oil and safe disposal of hazardous remains were investigated focusing on the most straightforward and environmentally friendly protocols. It is expected that this review attracts the experts in petroleum chemistry, and other relevant fields and provides a comprehensive understanding of current sludge control and treatment research.

Nanocrystalline cellulose as an eco-friendly reinforcing additive to polyurethane coating for augmented anticorrosive behavior.

Nanocrystalline cellulose (NCC) and micro-powdered cellulose (MPC) were extracted from rice straw by mechanical and alkali treatment methods, then characterized via infrared spectroscopy and dynamic light scattering. A series of polyurethane nanocrystalline cellulose composite (PNCCC) and polyurethane micro-powdered cellulose composite (PMPCC) coatings were prepared with various loading levels of NCC and MPC from 0.5 to 2.0 wt.%, and the coatings were applied onto the pretreated mild steel substrate at room temperature. The results showed that the NCC and MPC influenced positively the studied properties of the polyurethane coating; furthermore the most pronounced anticorrosive properties were obtained at 1 wt.% NCC and MPC, as confirmed by open circuit potential (OCP) study, electrochemical impedance spectroscopy (EIS) study and salt spray test. However, the optimum enhancement of mechanical properties was found at 1.5 wt.% loading level, after which further loading of NCC and MPC led to the reduction in the mechanical properties.