Spatial distribution and health risks assessment of heavy metals in e-waste dumping sites from Pakistan.

The present study focused on to determine the concentration and health risk of heavy metals (Cu, Pb, Zn, Cd, Hg, Cr) in e-waste contaminated soils collected from different provinces of Pakistan. Further, the impact of heavy metals on soil enzyme activities and microbial community was also investigated. The concentration (mg/kg) of Hg, Zn, Fe, Cu, Pb, Cd, and Cr ranged between 0-0.258, 2.284-6.587, 3.005-40.72, 8.67-36.88, 12.05-35.03, 1.03-2.43, and 33.13-60.05, respectively. The results revealed that Lahore site of Punjab province indicated more concentration of heavy metals as compared to other sites. The level of Cr at all sites whereas Hg at only two sites exceeds the World Health Organization standards (WHO) for soil. Soil enzyme activity exhibited dynamic trend among the sites. Maximum enzyme activity was observed for urease followed by phosphatase and catalase. Contamination factor (Cf), Pollution load index (PLI), and geo-accumulation index (Igeo) results showed that all the sites are highly contaminated with Cu, Cd, and Pb. Hazard index (HI) was less than 1 for children and adults suggesting non-carcinogenic health risk. Principle component analysis results depicted relation among Cr, Fr, catalase, and actinomycetes; Cd, OM, urease, and bacteria, and Pb, Cu, Zn, Hg, and phosphatase, suggesting soil enzymes and microbial community profiles were influenced by e-waste pollution. Therefore, there is a dire need to introduce sustainable e-waste recycling techniques as well as to make stringent e-waste management policies to reduce further environmental contamination.

Predicting ambient PM2.5 concentrations via time series models in Anhui Province, China.

Due to rapid expansion in the global economy and industrialization, PM2.5 (particles smaller than 2.5 µm in aerodynamic diameter) pollution has become a key environmental issue. The public health and social development directly affected by high PM2.5 levels. In this paper, ambient PM2.5 concentrations along with meteorological data are forecasted using time series models, including random forest (RF), prophet forecasting model (PFM), and autoregressive integrated moving average (ARIMA) in Anhui province, China. The results indicate that the RF model outperformed the PFM and ARIMA in the prediction of PM2.5 concentrations, with cross-validation coefficients of determination R2, RMSE, and MAE values of 0.83, 10.39 µg/m3, and 6.83 µg/m3, respectively. PFM achieved the average results (R2 = 0.71, RMSE = 13.90 µg/m3, and MAE = 9.05 µg/m3), while the predicted results by ARIMA are comparatively poorer (R2 = 0.64, RMSE = 15.85 µg/m3, and MAE = 10.59 µg/m3) than RF and PFM. These findings reveal that the RF model is the most effective method for predicting PM2.5 and can be applied to other regions for new findings.

The interactions between aquatic plants and antibiotics: Progress and prospects.

Antibiotics have emerged as a widespread pollutant in the aquatic environment. Aquatic phytoremediation to remove antibiotic pollution in water has aroused increasing research. Due to complex interaction between aquatic plants and antibiotics in the aquatic environment, it is essential to summarize the present research progress and point out the shortcomings to better use aquatic plants to remediate antibiotic pollution. A growing body of evidence indicates roots are the most important tissues for aquatic plants to absorb and accumulate antibiotics and antibiotics can be transferred in aquatic plants. LogKow value is an important factor to affecting the antibiotic absorption by aquatic plant. The study showed that antibiotics have toxic effects on aquatic plants, including metabolic interference, oxidative damage, damage to photosynthetic system, and inhibition of growth. However, the species sensitivity distribution model indicated that the general environmental concentrations of antibiotics pose no risk to aquatic plant growth. Aquatic plants can significantly reduce the antibiotics concentration in water and the removal efficiency is affected by many factors, such as the type of aquatic plants and antibiotics. Macrolide antibiotics are most easily removed by plants. This study reviewed the current research progress and provides valuable scientific recommendations for further research.

Applying synchrotron radiation-based attenuated total reflection-fourier transform infrared to chemically characterise organic functional groups in terrestrial soils of King George Island, Antarctica.

Anthropogenic activities, especially associated with fossil fuel combustion, are raising concerns worldwide, but remote areas with extreme climate conditions, such as Antarctica, are isolated from the adverse influence of human civilisation. Antarctica is considered as the most untouched place on Earth. Such pristine areas, which have extremely low chemical pollutant concentrations owing to restricted anthropogenic impacts, exemplify plausible model environments to test the reliability and sensitivity of advanced analytical techniques employed to chemically characterise and evaluate the spatial distribution of chemical pollutants. Here, synchrotron radiation-based attenuated total reflection-Fourier transform infrared (SR-ATR-FTIR) spectroscopy was employed to evaluate the variations in the organic functional groups (OFGs) of terrestrial soils of King George Island, Antarctica. Second-derivative SR-ATR-FTIR spectroscopy coupled with several multivariate statistical techniques highlighted the influence of anthropogenic activities on the alterations of OFGs in terrestrial soils collected near airports. Moreover, the daily activities of penguins could also have caused fluctuations in some OFGs of the samples the close to the Tombolo area and Ardley Island. The findings proved the effectiveness of SR-ATR-FTIR in evaluating the potential sources of variations in the chemical constituents, especially OFGs, in Antarctic terrestrial soils.

Emission characteristics of (halogenated) polycyclic aromatic hydrocarbons during printed circuit board combustion and estimated emission intensity of a typical e-waste dismantling site in South China.

The pollution of polycyclic aromatic hydrocarbons (PAHs) and halogenated PAHs (Cl/Br-PAHs) caused by electronic waste dismantling activities have attracted considerable attention. The present study investigated the emissions and formation of PAHs and Cl/Br-PAHs based on the combustion of printed circuit boards simulating electronic waste dismantling process. The emission factor of ΣPAHs was 648 ± 56 ng/g, which was much lower than that of ΣCl/Br-PAHs (8.80 × 104 ± 9.14 × 103 ng/g). From 25 to 600 °C, the emission rate of ΣPAHs reached a sub-peak of 7.39 ± 1.85 ng/(g•min) at 350 °C, then increased gradually with the fastest rate of 19.9 ± 21.8 ng/(g•min) at 600 °C, whereas that of ΣCl/Br-PAHs was the fastest at 350 °C with a rate of 597 ± 106 ng/(g•min), then decreased gradually. The present study suggested that the formation pathways of PAHs and Cl/Br-PAHs are by de novo synthesis. Low molecular weight PAHs were readily partitioned into gas and particle phases, whereas high molecular weight fused PAHs were only detected in oil phase. However, the proportion of Cl/Br-PAHs in particle and oil phases were different from that of gas phase, whereas similar to that of the total emission. In addition, PAH and Cl/Br-PAH emission factors were used to estimate the emission intensity of pyrometallurgy project in Guiyu Circular Economy Industrial Park, and it was shown that approximately 1.30 kg PAHs and 176 kg Cl/Br-PAHs would be emitted annually. This study revealed that Cl/Br-PAHs would be formed by de novo synthesis, and for the first time provided the emission factors of Cl/Br-PAHs during the heat treatment process of printed circuit board, as well as estimated the contribution of pyrometallurgy, a new electronic waste recovery technology, to environmental Cl/Br-PAH pollution, which provides potential scientific information for governmental decision-making on the control of Cl/Br-PAHs.

Resuscitation-Promoting Factor Accelerates Enrichment of Highly Active Tetrachloroethene/Polychlorinated Biphenyl-Dechlorinating Cultures.

The anaerobic bioremediation of polychlorinated biphenyls (PCBs) is largely impeded by difficulties in massively enriching PCB dechlorinators in short periods of time. Tetrachloroethene (PCE) is often utilized as an alternative electron acceptor to preenrich PCB-dechlorinating bacteria. In this study, resuscitation promoting factor (Rpf) was used as an additive to enhance the enrichment of the microbial communities involved in PCE/PCBs dechlorination. The results indicated that Rpf accelerates PCE dechlorination 3.8 to 5.4 times faster than control cultures. In Aroclor 1260-fed cultures, the amendment of Rpf enables significantly more rapid and extensive dechlorination of PCBs. The residual high-chlorinated PCB congeners (≥5 Cl atoms) accounted for 36.7% and 59.8% in the Rpf-amended cultures and in the corresponding controls, respectively. This improvement was mainly attributed to the enhanced activity of the removal of meta-chlorines (47.7 mol % versus 14.7 mol %), which did not appear to affect dechlorination pathways. The dechlorinators, including Dehalococcoides in Chloroflexi and Desulfitobacterium in Firmicutes, were greatly enriched via Rpf amendment. The abundance of nondechlorinating populations, including Methanosarcina, Desulfovibrio, and Bacteroides, was also greatly enhanced via Rpf amendment. These results suggest that Rpf serves as an effective additive for the rapid enrichment of active dechlorinating cultures so as to provide a new approach by which to massively cultivate bioinoculants for accelerated in situ anaerobic bioremediation. IMPORTANCE The resuscitation promoting factor (Rpf) of Micrococcus luteus has been reported to resuscitate and stimulate the growth of functional microorganisms that are involved in the aerobic degradation of polychlorinated biphenyls (PCBs). However, few studies have been conducted to investigate the role of Rpf on anaerobic microbial populations. In this study, the enhancement of Rpf on the anaerobic microbial dechlorination of PCE/PCBs was discovered. Additionally, the Rpf-responsive populations underlying the enhanced dechlorination were uncovered. This report reveals the rapid enrichment of active dechlorinating cultures via Rpf amendment, and this sheds light on massively enriching PCB dechlorinators in short periods of time. The enhanced in situ anaerobic bioremediation of PCBs could be expected by supplementing Rpf.

Temporal trends and health risks of organophosphorus flame retardants in fishes in Taihu Lake from 2013 to 2018.

Organophosphorus flame retardants (OPFRs) are synthetic, physical additive flame retardants widely detected in the environment. To investigate the temporal trends of OPFRs in Taihu regions and the associated health risks from fish consumption, 150 fish samples of five species were collected from Taihu Lake in China from 2013 to 2018. Eight OPFRs were measured, having 2-ethylhexyl diphenyl phosphate (90.7%) and tris (1,3-dichloro-2 propyl) phosphate (21.5%) as the most and least frequently detected OPFRs, respectively. Among the eight OPFRs, tris (chloropropyl) phosphate concentration (446 pg/g, wet weight) was higher than others. The maximum cumulative concentration of the OPFRs (∑8OPFRs) was observed in large icefish (1.69 × 103 pg/g), while silver carp (841 pg/g) had the lowest. For the temporal trends, higher levels of ∑8OPFRs (1.91 × 103 pg/g) were detected in 2013 than in other years, although no significant change in the trend occurred over time. The estimated daily intake of OPFRs from large icefish consumption was 1.20 × 103 pg/kg-bw/day, higher than that of other fish species. The Monte Carlo simulations showed that ≤0.3% of adults and children would suffer non-cancer health risks from OPFRs via fish consumption. This study provides the first data on temporal trends of OPFRs in Taihu Lake.

Synchronous response of arsenic methylation and methanogenesis in paddy soils with rice straw amendment.

Rice straw (RS) amendment promotes arsenic (As) methylation and methane (CH4) emissions from paddy soils, which can cause straighthead disease and climate warming. Although methanogens have been identified as critical regulators of methylated As concentrations in flooded soils, the mechanism of these microbial groups on As methylation in paddy soils with RS amendment remains unknown. In this study, paddy soil was incubated to test the response in As methylation and methanogenesis in flooded soil with RS amendment. Our results showed that RS amendment increased the accumulation of monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) whether methanogenesis was inhibited or not. The methanogens in the genera of Methanocella probably played critical role in promoting As methylation in flooded soil with RS amendment. With the RS amendment, inhibition of methanogenesis led to the accumulation MMA and DMA by suppressing DMA demethylation. The demethylation of DMA was driven by methanogens possibly belonging to the genera of Methanobacterium. This study revealed a wealth of methanogens that dominate As methylation with RS amendment. It will provide guidance to RS amendment in As contaminated paddy soil and has important implications for rice quality and global climate change.

Myco- and phyco-remediation of polychlorinated biphenyls in the environment: a review.

Polychlorinated biphenyls (PCBs) are toxic organic compounds and pose serious threats to environment and public health. PCBs still exist in different environments such as air, water, soil, and sediments even on ban. This review summarizes the phyco- and myco-remediation technologies developed to detoxify the PCB-polluted sites. It was found that algae mostly use bioaccumulation to biodegradation strategies to reclaim the environment. As bio-accumulator, Ulva rigida C. Agardh has been best at 25 ng/g dry wt to remove PCBs. Evidently, Anabaena PD-1 is the only known PCB degrading alga and efficiently degrade Aroclor 1254 and dioxin-like PCBs up to 84.4% and 37.4% to 68.4%, respectively. The review suggested that factors such as choice of algal strains, response of microalgae, biomass, the rate of growth, and cost-effective cultivation conditions significantly influence the remediation of PCBs. Furthermore, the Anabaena sp. linA gene of Pseudomonas paucimobilis Holmes UT26 showed enhanced efficiency. Pleurotus ostreatus (Jacq.) P. Kumm is the most efficient PCB degrading fungus, degrading up to 98.4% and 99.6% of PCB in complex and mineral media, respectively. Combine metabolic activities of bacteria and yeast led to the higher detoxification of PCBs. Fungi-algae consortia would be a promising approach in remediation of PCBs. A critical analysis on potentials and limits of PCB treatment through fungal and algal biosystems have been reviewed, and thus, new insights have emerged for possible bioremediation, bioaccumulation, and biodegradation of PCBs.

Assessing the ambient air quality patterns associated to the COVID-19 outbreak in the Yangtze River Delta: A random forest approach.

The novel coronavirus (COVID-19), first identified at the end of December 2019, has significant impacts on all aspects of human society. In this study, we aimed to assess the ambient air quality patterns associated to the COVID-19 outbreak in the Yangtze River Delta (YRD) region using a random forest (RF) model. To estimate the accuracy of the model, the cross-validation (CV), determination coefficient R2, root mean squared error (RMSE) and mean absolute error (MAE) were used. The results demonstrate that the RF model achieved the best performance in the prediction of PM10 (R2 = 0.78, RMSE = 8.81 µg/m3), PM2.5 (R2 = 0.76, RMSE = 6.16 µg/m3), SO2 (R2 = 0.76, RMSE = 0.70 µg/m3), NO2 (R2 = 0.75, RMSE = 4.25 µg/m3), CO (R2 = 0.81, RMSE = 0.4 µg/m3) and O3 (R2 = 0.79, RMSE = 6.24 µg/m3) concentrations in the YRD region. Compared with the prior two years (2018-19), significant reductions were recorded in air pollutants, such as SO2 (-36.37%), followed by PM10 (-33.95%), PM2.5 (-32.86%), NO2 (-32.65%) and CO (-20.48%), while an increase in O3 was observed (6.70%) during the COVID-19 period (first phase). Moreover, the YRD experienced rising trends in the concentrations of PM10, PM2.5, NO2 and CO, while SO2 and O3 levels decreased in 2021-22 (second phase). These findings provide credible outcomes and encourage the efforts to mitigate air pollution problems in the future.

Facile synthesis, crystal structure, biological evaluation, and molecular modeling studies of N-((4-acetyl phenyl) carbamothioyl) pivalamide as the multitarget-directed ligand.

The crystal structure of N-((4-acetylphenyl)carbamothioyl)pivalamide (3) was synthesized by inert refluxing pivaloyl isothiocyanate (2) and 4-aminoacetophenone in dry acetone. The spectroscopic characterization (1H-NMR, 13CNMR, FT-IR) and single crystal assays determined the structure of synthesized compound (3). Systematic experimental and theoretical studies were conducted to determine the molecular characteristics of the synthesized crystal. The biological examination of (3) was conducted against a variety of enzymes i.e., acetyl cholinesterase (AChE), butyl cholinesterase (BChE), alpha amylase, and urease enzyme were evaluated. The crystal exhibited approximately 85% enzyme inhibition activity against BChE and AChE, but only 73.8 % and 57.9% inhibition activity against urease and alpha amylase was observed respectively. The theoretical calculations were conducted using density functional theory studies (DFTs) with the 6-31G (d, p) basis set and B3LYP functional correlation. The Frontier molecular orbital analysis revealed that the HOMO/LUMO energy gap was smaller, which corresponds to the molecule's reactivity. In terms of reactivity, the chemical softness value was found to be in good agreement with experimental values. In Crystal structure analysis, the intramolecular N-H•••O hydrogen bond generates a S 6) ring motif and N-H•••O interactions exist in crystal structure between the centroids of neighboring parallel aromatic (C4-C9) rings with a centroid to centroid distance of 3.9766 (7)Å. These intermolecular interactions were useful in structural stabilization. The Hirshfeld surfaces and their related two-dimensional fingerprint plots were used for thorough investigation of intermolecular interactions. According to Hirshfeld surface analysis of the crystal structure the most substantial contributions to the crystal packing are from H ••• O and H ••• N/N ••• H interactions. Molecular docking studies were conducted to evaluate the binding orientation of synthesized crystal with multiple targets. The compound exhibited stronger interactions with AChE and BChE with binding energies of -7.5 and -7.6 kcal/mol, respectively. On the basis of in-vitro and in-silico findings, it is deduced that N-((4-acetylphenyl)carbamothioyl)pivalamide 3) possesses reactive and potent multiple target inhibitory properties.

Concentrations and source identification of priority polycyclic aromatic hydrocarbons in sediment cores from south and northeast Thailand.

In this study, the environmental fate of carcinogenic polycyclic aromatic hydrocarbons (PAHs) in tropical lake sediments and their potential sources have been discussed. 15 PAHs (i.e. ΣPAH) have been investigated in two lakes, namely Songkhla Lake (SKL) and Nong Han Kumphawapi Lake (NHL), which are located at the southern and north-eastern parts of Thailand, respectively. Since these two lakes are registered as important wetlands under the Ramsar convention (United Nations Educational, Scientific and Cultural Organization: UNESCO), the quantitative identification of potential contributors of PAHs is an inevitable analytical tool for launching an evidence-based policy. The ΣPAH concentrations observed in SKL and NHL sediments (n = 135) were in the range of 19.4-1,218 ng g-1 and 94.5-1,112 ng g-1, respectively. While the exponential decline of ΣPAH contents were detected in SKL sediments, NHL showed a trend of enhancing PAH contents with depth. The averaged benzo [a]pyrene (B [a]P) contents of surface sediments in both lakes were much below the value stipulated by the United States Environmental Protection Agency (US-EPA) guidelines for carcinogen risk assessment. Based on numerous multivariate statistical techniques coupled with source apportionment analysis, "biomass burning" and "anthropogenic activities" are two potential contributors of the PAHs detected in the study areas. To achieve the long-term conservation of nature with related ecosystem services and cultural values, it is therefore important to promote decision-making based on ecotoxicological studies of carcinogenic substances.

Novel adamantyl clubbed iminothiazolidinones as promising elastase inhibitors: design, synthesis, molecular docking, ADMET and DFT studies.

Porcine Pancreatic Elastase (PPE) is a serine protease that is homologous to trypsin and chymotrypsin that are involved in various pathologies like inflammatory disease, Chronic Obstructive Pulmonary Disease (COPD), acute respiratory distress syndrome, cystic fibrosis, and atherosclerosis. PPE if remained uninhibited would lead to digestion of important connective tissue. We developed new structurally diverse series of adamantyl-iminothiazolidinone hybrids to divulge elastase inhibition assay. To identify potent derivatives, in silico screening was conducted and in vitro studies disclosed that the compounds 5a, 5f, 5g, and 5h showed excellent binding energies and low IC50 values. In silico studies including molecular docking, DFT studies (using the B3LYP/SVP basis set in the gas phase) drug likeness scores and molecular dynamic simulation studies were conducted to evaluate protein-ligand interactions and to determine the stability of top ranked conformation. In silico studies further supported the results of in vitro experiments and suggest these derivatives as novel inhibitors of elastase enzyme.

A global review of microplastics in wastewater treatment plants: Understanding their occurrence, fate and impact.

Microplastics (MPs) are emerging as a serious environmental concern, with wastewater treatment plants (WWTPs) acting as the main entry routes for MPs into aquatic and terrestrial ecosystems. On a global scale, our literature review found that MP research in WWTPs has only been conducted on 121 WWTPs in 17 countries, with the majority of the work being done in Europe (53%), followed by the United States of America and Canada (24%), Asia (18%), and Australia (5%) in recent years. MPs in WWTPs are primarily derived from Personal Care and Cosmetic Products (PCCPs), which are primarily composed of polyethylene (PE) derivatives. Based on the studies, microfibers (57%) and fragments (47%) are observed to be the most common MP forms in influents and effluents of WWTPs. The chemical characterization of MPs detected in WWTPs, showed the occurrence of polyethylene (PE) (22%), polystyrene (PS) (21%), and polypropylene (13%). Although MP retention/removal efficiencies of different treatment technologies vary from medium to high, deliberations on sludge disposal on agricultural soils containing MPs and MP intrusion into groundwater are required to sustainably regulate MP contaminant transport. Thus, the development of efficient detection methods and understanding their fate are of immense significance for the management of MPs. Despite the fact that ongoing research in MPs and WWTPs has unquestionably improved our understanding, many questions and concerns remain unanswered. In this review, the current status of the detection, occurrence, and impact of MPs in WWTPs across the world are systematically reviewed to prioritize policy-making to recognize the WWTPs as global conduits of MPs.

Oxidative dehalogenation and mineralization of polychlorinated biphenyls by a resuscitated strain Streptococcus sp. SPC0.

Most functional microorganisms cannot be cultivated due to entering a viable but non-culturable (VBNC) state, which limits the characterization and application of polychlorinated biphenyl (PCB)-degrading strains. Resuscitating VBNC bacteria could provide huge candidates for obtaining high-efficient PCB degraders. However, limited studies have focused on the ability of resuscitated strains for PCBs degradation. In the present study, whole-genome analysis of a resuscitated strain SPC0, and its performances in degradation of three prevalent PCB congeners (PCBs 18, 52 and 77) were investigated. The results indicate that the strain SPC0 belonged to the genus Streptococcus, possessed the degradation potential for aromatic xenobiotics. The SPC0 could effectively degrade PCBs 18 and 52, but exhibited lower degradation efficiency of PCB 77. Degradation of PCBs 18 and 52 could be fitted well by zero-order model, whereas the fittest model for PCB 77 degradation was pseudo second-order kinetics. The bph genes expression, chloride ions release and degradation metabolites identification, suggest that SPC0 possessed the capability of oxidative dehalogenation and mineralization of PCBs. Interestingly, SPC0 can degrade PCBs via the bph-encoded biphenyl pathway, and further mineralize metabolite dichlorobenzoate via protocatechuate pathway. This study is the first to show that a strain belonging to genus Streptococcus possessed PCB-degrading capability, which uncovered the powerful potential of resuscitated strains for bioremediation of PCB-contaminated sites.

Chemical remediation and advanced oxidation process of polychlorinated biphenyls in contaminated soils: a review.

Polychlorinated biphenyls (PCBs) are synthetic organic compounds ubiquitously distributed worldwide due to their persistence, long-range atmospheric transport, and bioaccumulation. Owing to teratogenic properties, PCBs are a global environmental problem. Different physical, biological, and chemical techniques are utilized for the remediation of PCBs. This review paper discusses the recent development in photocatalytic and chemical techniques for the remediation of PCBs in contaminated soils. In particular, the photocatalytic degradation of PCBs combined with soil washing, Fe-based reductive dichlorination, and advanced oxidation process (Fenton advance oxidation and persulfate oxidation) is discussed and reviewed in detail. The review suggested that advanced oxidation is an efficient remediation technique with 77-99% of removal efficiency of PCBs. Persulfate oxidation is the most suitable technique which could work at normal environmental conditions (such as pH, temperature, soil organic matter (SOM), etc.). Different environmental factors such as pH, temperature, and SOM affect the Fe-based reductive dechlorination and Fenton advance oxidation techniques. The surfactants and organic solvents used in soil washing combined with photocatalytic degradation affect the degradation capability of these techniques. This review will contribute to PCBs degradation by the detailed discussion of development in chemical technique future perspective and research needs.

Forty years studies on polychlorinated biphenyls pollution, food safety, health risk, and human health in an e-waste recycling area from Taizhou city, China: a review.

E-waste generation has become a serious environmental challenge worldwide. Taizhou of Zhejiang Province, situated on the southeast coastline of China, has been one of the major e-waste dismantling areas in China for the last 40 years. In this review, we focused on the polychlorinated biphenyl (PCB) trends in environmental compartments, burden and impact to humans, food safety, and health risk assessment from Taizhou, China. The review suggested that PCBs showed dynamic trends in air, soil, water, biodiversity, and sediments. Soils and fish samples indicated higher levels of PCBs than sediments, air, water, and food items. PCB levels decreased in soils with the passage of time. Agriculture soils near the e-waste recycling sites showed more levels of total PCBs than industrial soils and urban soils. Dioxin-like PCB levels were higher in humans near Taizhou, suggesting that e-waste pollution could influence humans. Compared with large-scale plants, simple household workshops contributed more pollution of PCBs to the environment. Pollution index, hazard quotient, and daily intake were higher for PCBs, suggesting Taizhou should be given priority to manage the e-waste pollution. The elevated body burden may have health implications for the next generation. The areas with stricter control measures, strengthened laws and regulations, and more environmentally friendly techniques indicated reduced levels of PCBs. For environment protection and health safety, proper e-waste dismantling techniques, environmentally sound management, awareness, and regular monitoring are very important.