Pectin-based cinnamon essential oil Pickering emulsion film with two-sided differential wettability: A major role in the spatial distribution of microdroplets.

Pickering emulsions have attracted much attention as a novel emulsifying technology. This research to explore Zein-Citrus pectin nanoparticles stabilized cinnamon essential oil (CEO) Pickering emulsion (ZCCPEs) for constructing Pickering emulsion edible film (PEF). Unlike traditional research, which focuses on antibacterial and antioxidant activities, our research examined the physical properties of PEF, specifically changes in wettability. The results show that PEF has better transparency and tensile strength than the pectin alone direct emulsion film (PAEF), and the spatial distribution of Pickering emulsion droplets gives different wettability on both sides of PEF. The partially hydrophobic upside has important application value in food packaging. At the same time, the PEF is biodegradable and environmentally non-polluting. The edible film loaded with essential oils, developed based on the Pickering stabilization mechanism in this study, possesses several desirable characteristics for potential used as bioactive packaging films in food applications.

Effects of high pressure processing on structural changes, aggregation, and binding mechanisms of ß-Lactoglobulin with typical polyphenols.

The binding capacity of ß-Lactoglobulin (BLG) is crucial for delivering polyphenols, influenced by structural changes. High pressure processing (HPP) has the potential to modify BLG's structure and aggregation, but its specific impact on BLG-polyphenol interactions is uncertain. This study used circular dichroism spectroscopy and molecular dynamics simulations to reveal HPP-induced structural changes in BLG, supported by particle size analysis indicating aggregation. Seven structurally diverse polyphenols (quercetin-QR, hesperetin-HSP, dihydromyricetin-DHM, gallic acid-GA, (-)-epicatechin-EC, resveratrol-RES, and secoisolariciresinol diglucoside-SDG) were investigated to comprehensively analyze their binding patterns using fluorescence spectroscopy and molecular docking. HPP reduced BLG's ordered structure and increased its aggregation. Binding affinities peaked at 400 MPa for DHM, QR, HSP, GA, and RES, while SDG and EC exhibited maximum affinities at atmospheric pressure and 600 MPa, respectively. Elevated pressures enhanced BLG-polyphenol interactions, particularly at residues 44GLU and 160CYS, with van der Waals forces dominating the binding free energy.

Ultrasonic-microwave technique promotes the physicochemical structure of hydrogel and its release characterization of curcumin in vitro.

In this study, soybean protein isolate and hawthorn pectin were mixed to prepare binary hydrogels using ultrasound and microwave techniques. Moderate treatment can not only significantly improve the mechanical strength of the hydrogel, but also increase the tightness of the internal cross-linking. The strengthening of interactions (hydrogen bonds, hydrophobic interactions, and disulfide bonds) was the main reason for this trend. Especially, the ultrasonic-microwave (80 s) treatment hydrogel possessed excellent hardness (33.426 N), water-holding capacity (98.26%), elasticity (G' = 1205 Pa), and a more homogeneous and denser microstructure. In addition, the hydrogel minimized the extent of curcumin loss (21.23%) after 5 weeks of storage. In general, the ultrasonic-microwave technique could significantly promote the physicochemical structure and curcumin bioaccessibility of hydrogels, which showed excellent market prospects in the food industry.

Antioxidant activity and semi-solid emulsification of a polysaccharide from coffee cherry peel.

In order to further improve the economic benefits of the coffee industry chain, we carried out the following systematic research on processing by-products. In this research, the obtained coffee cherry peel polysaccharide (CCP) which was removed from the coffee cherry peel by hot acid method had a galacturonic acid content of 20.50 % and a molecular weight of 3.05 kg/mol. According to the results of monosaccharide analysis, Fourier transform infrared spectroscopy, molecular weight distribution, and thermal analysis, CCP was a typical high methoxy polysaccharide. In vitro antioxidant results showed that CCP had better antioxidant capacity than commercial citrus polysaccharide (APC). When it came to emulsification performance, the water-oil bonding ability and disturbance resistance to the fluid of CCP were also significantly higher than that of APC. Specially, we found that 0.50 % (wt%) CCP could form a solid-liquid gel with very high plasticity at low oil phase fraction. In conclusion, the coffee cherry peel could be used as a natural source of a novel emulsifier, providing a promising alternative for polysaccharide in the food industry.

Pickering emulsions stabilized by zein-proanthocyanidins-pectin ternary composites (ZPAAPs): Construction and delivery studies.

Proanthocyanidins (Pas) are widely used in the preparation of functional foods due to their diverse biological activities. Taking advantage of the effect of Pas on the stability of Pickering emulsions, this study constructed the zein-proanthocyanidins-pectin ternary composites (ZPAAPs) as stabilizer to establish Pickering emulsions with potential delivery capacity. The appearance of the emulsion was pink which could be found in visual observation. The emulsion was stable during long-term storage in the range of 0.1 âˆ¼ 0.7 oil phase. CLSM showed that the oil droplets were coated with covering layer formed by ZPAAPs, which effectively prevented droplets congregating. The rheological results indicated that ZPAAPEs had elastic gel-like structure. In addition, ZPAAPEs still contained 54.4 % curcumin after storage for 15 d. And the bioavailability of curcumin was increased to 39.7 % ± 0.3. These studies may contribute to the controllable fabrication of Pickering emulsions for nutrient delivery in the food and pharmaceutical fields.

Encapsulation and sustained release of curcumin by hawthorn pectin and Tenebrio Molitor protein composite hydrogel.

In this study, the effects of pH value, mixing ratio and the Ca2+ concentration on the complex gelation of hawthorn pectin (HP) and Tenebrio Molitor protein (TMP) were investigated. The turbidity results showed that the composite gel had the maximum polymer concentration when the mixing ratio was 2:1 and the pH value was 3.35. The rheological measurement results showed that TMP/HP (15 mmol/L) hydrogel (THIH) had the highest storage modulus and loss modulus, indicating that the properties of the hydrogel at this Ca2+ concentration had been significantly improved. The results of scanning electron microscope and pore size also proved that the network structure prepared under this condition was compact and uniform, the pore size was small, which was beneficial to the entrapment of active components. Subsequently, in order to explore the storage stability and antioxidant activity of THIH-loaded curcumin in simulated gastrointestinal environment, in vitro simulated digestion experiment was carried out and satisfactory results were obtained. To sum up, THIH was a promising delivery system with broad application prospects, which was expected to provide a novel idea for the entrapment and delivery of active components.

Joint communication interference system design based on parameter modulation.

In this paper, a joint communication interference integration signal waveform is proposed to satisfy the need of electronic system integration in civil and military uses, and mitigate the tension of spectrum resource. We design the system structure of the integrated signal model and propose the communication receiving processing flow of the integrated system. We utilize the dense false-target jamming style to raise the constant false alarm rate detection threshold via the delay superposition of multiple groups of frequency modulation (FM) slope mismatch jamming signals, which can play a role in protecting our target from being detected. Furthermore, linear frequency modulation (LFM) signals with different FM slopes and Doppler frequencies are obtained via the modulation mapping of communication data; thus, a single LFM signal can carry n bit data. Through correlation processing and frequency detection, code sequence information can be obtained to achieve communication function. The simulation results show that the integrated signal has the effect of shielding and jamming the pulse compression radar. Moreover, the system has a better bit error rate and a high communication rate, which can ensure that the communication task of sending accurate instructions is completed while implementing effective interference.

MIMO Radar Parallel Simulation System Based on CPU/GPU Architecture.

The data volume and computation task of MIMO radar is huge; a very high-speed computation is necessary for its real-time processing. In this paper, we mainly study the time division MIMO radar signal processing flow, propose an improved MIMO radar signal processing algorithm, raising the MIMO radar algorithm processing speed combined with the previous algorithms, and, on this basis, a parallel simulation system for the MIMO radar based on the CPU/GPU architecture is proposed. The outer layer of the framework is coarse-grained with OpenMP for acceleration on the CPU, and the inner layer of fine-grained data processing is accelerated on the GPU. Its performance is significantly faster than the serial computing equipment, and satisfactory acceleration effects have been achieved in the CPU/GPU architecture simulation. The experimental results show that the MIMO radar parallel simulation system with CPU/GPU architecture greatly improves the computing power of the CPU-based method. Compared with the serial sequential CPU method, GPU simulation achieves a speedup of 130 times. In addition, the MIMO radar signal processing parallel simulation system based on the CPU/GPU architecture has a performance improvement of 13%, compared to the GPU-only method.

Feasibility of Intravoxel Incoherent Motion for Differentiating Benign and Malignant Thyroid Nodules.

RATIONALE AND OBJECTIVES: This study aimed to preliminarily investigate the feasibility of intravoxel incoherent motion (IVIM) theory in the differential diagnosis of benign and malignant thyroid nodules. MATERIALS AND METHODS: Forty-five patients with 56 confirmed thyroid nodules underwent preoperative routine magnetic resonance imaging and IVIM diffusion-weighted imaging. The histopathologic diagnosis was confirmed by surgery. Apparent diffusion coefficient (ADC), perfusion fraction f, diffusivity D, and pseudo-diffusivity D* were quantified. Independent samples t test of IVIM-derived metrics were conducted between benign and malignant nodules. Receiver-operating characteristic analyses were performed to determine the optimal thresholds as well as the sensitivity and specificity for differentiating. RESULTS: Significant intergroup difference was observed in ADC, D, D*, and f (p < 0.001). Malignant tumors featured significantly lower ADC, D and D* values and a higher f value than that of benign nodules. The ADC, D, and D* could distinguish the benign from malignant thyroid nodules, and parameter f differentiate the malignant tumors from benign nodules. The values of the area under the curve for parameter ADC, D, and D* were 0.784 (p = 0.001), 0.795 (p = 0.001), and 0.850 (p < 0.001), separately, of which the area under the curve of f value was the maximum for identifying the malignant from benign nodules, which was 0.841 (p < 0.001). CONCLUSION: This study suggested that ADC and IVIM-derived metrics, including D, D*, and f, could potentially serve as noninvasive predictors for the preoperative differentiating of thyroid nodules, and f value performed best in identifying the malignant from benign nodules among these parameters.