Cationic pyridinium porphyrins appending different peripheral substituents: spectroscopic studies on their interactions with bovine serum albumin.

The interaction of cationic pyridinium porphyrins appending methylpyridyl, hydroxyphenyl, propionoxyphenyl or carboxyphenyl group at meso-20-position of porphyrin core with bovine serum albumin (BSA), was studied by the combination of absorption spectroscopy, surface-enhanced Raman spectroscopy (SERS), circular dichroism (CD) spectroscopy, fluorescence spectroscopy and synchronous spectroscopy. The spectral monitoring results indicate that the studied compounds could bind with the BSA molecule and the calculated binding constants show that the tetracationic porphyrin has higher binding affinity than those tricationic ones. The interactions between porphyrins and BSA employ an electrostatic binding mechanism and there was only one binding site which located on the surface of the protein molecule.

The photoinduced electron transference of porphyrin-anthraquinone dyads bridged with different lengths of links.

The photoinduced electron transference (PET) interaction in porphyrin containing donor-acceptor (D-A) molecules is of great importance in nature and a significant part of the PET research has been devoted to the study of its mechanism ("through-space" or "through-bond") in these decades. Herein we synthesized a series of covalently linked porphyrin-anthraquinone dyads (Por-C(n)-AQ) bridged with flexible alkoxy chains at different lengths (n=1, 4, 10) and investigated their intramolecular PET using a combination of electronic absorption, steady-state fluorescence and decayed luminescence spectra. The experimental results show that the PET efficiency depends on the length of the flexible linkage between the porphyrin and anthraquinone moieties. Meanwhile, theoretical calculation applying the density functional theory (DFT) was also carried out to give the frontier orbital distribution and the optimized structures of these dyads. It is found that the orientation of the dyad with high PET efficiency is disadvantageous to π-π interaction. Thus, the PET of these dyads seemingly is best compatible with a "through-bond" (superexchange) mechanism.

DNA binding and photocleavage specificities of a group of tricationic metalloporphyrins.

The interactions of 5,10,15-tris(1-methylpyridinium-4-yl)-20-(4-hydroxyphenyl)porphyrinatozinc(II) Zn[TMPyHP](3+) (2) along with Cu[TMPyHP](3+) (3), Co[TMPyHP](4+) (4), Mn[TMPyHP](4+) (5) and the free base porphyrin H(2)[TMPyHP](3+) (1) with duplex DNA have been studied by using a combination of absorption, fluorescence titration, surface-enhanced Raman spectroscopy (SERS), induced circular dichroism (ICD) spectroscopy, thermal DNA denaturation, viscosity measurements as well as gel electrophoresis experiment. Their binding modes and intrinsic binding constants (K(b)) to calf DNA (CT DNA) were comparatively studied and were found significantly influenced by different metals coordinated with the porphyrin plane. Except 3, which has four-coordination structure at the metal, all the metal derivatives showed non-intercalative DNA-binding mode and lower K(b) than the free base porphyrin 1, most probably due to the steric hindrance results from the axial ligands of the inserted metals which are five or six-coordination structures. Meanwhile, the insertion of metals into cationic porphyrin greatly removed the self-aggregation of the metal-free porphyrins, and thus fully enhanced the singlet oxygen ((1)O(2)) productivities in the DNA photocleavage experiments. Therefore, these metalloporphyrins have comparable DNA cleavage ability with the free base porphyrin.

DNA-binding and photocleavage properties of cationic porphyrin-anthraquinone hybrids with different lengths of links.

Four cationic porphyrin-anthraquinone (Por-AQ) hybrids differing in lengths of flexible alkyl linkage, 5-[4-(1-N-anthraquinonon-yl)-L-oxophenyl]-10,15,20-tris(N-methylpyridinium-4-yl)porphyrin triiodide, (L = acetyl, pentanoyl, octanoyl, undecanoyl, designed as [AQATMPyP]I3, [AQPTMPyP]I3, [AQOTMPyP]I3 and [AQUTMPyP]I3, respectively, see Fig. 1), were synthesized and their interactions with DNA were investigated. The results of spectroscopic, denaturation and viscosity measurements suggest that [AQATMPyP]I3 binds to DNA through non-intercalative mode while the other three hybrids with longer links bind via bis-intercalative mode. Ethidium bromide (EB) competition experiment was carried out to determine the binding constants (Kb) of these compounds for CT DNA, and [AQPTMPyP]I3 shows the largest Kb among these hybrids. The photocleavage mechanism and wavelength-dependent cleaving abilities of these hybrids to pBR322 plasmid DNA were also comparably investigated.

Tricationic pyridium porphyrins appending different peripheral substituents: experimental and DFT studies on their interactions with DNA.

Four tricationic pyridium porphyrins appending hydroxyphenyl, methoxyphenyl, propionoxyphenyl or carboxyphenyl group at meso-20-position of porphyrin core have been synthesized and their abilities to bind and cleave DNA have been investigated. Using a combination of absorption, fluorescence, circular dichroism (CD) spectra, thermal DNA denaturation as well as viscosity measurements, their binding modes and intrinsic binding constants (K(b)) to calf DNA (CT DNA) were comparatively studied and also compared with those of 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin (TMPyP). The results suggest that the K(b) values of these porphyrins are greatly influenced by the number of positive charges and steric hindrance. Theoretical calculations applying the density functional theory (DFT) have been carried out and explain their DNA-binding properties reasonably. The efficiency of DNA photocleavage by these porphyrins shows high dependence on the values of K(b).

Experimental and DFT studies on DNA binding and photocleavage of two cationic porphyrins. Effects of the introduction of a carboxyphenyl into pyridinium porphyrin.

The DNA-binding affinities and DNA photocleavage abilities of cationic porphyrin, 5-(4-carboxyphenyl)-10,15,20-tris(4-methylpyridiniumyl)porphyrin (CTMPyP), and its reference compound meso-tetrakis(N-methyl-4-pyridiniumyl)porphyrin (H2TMPyP) have been investigated. The DNA-binding behaviors of the two compounds in NaH2PO4 buffer were compared systematically by using absorption, fluorescence and circular dichroism (CD) spectra, thermal denaturation as well as viscosity measurements. The experimental results show that CTMPyP binds to DNA in an outside binding mode, while H2TMPyP in an intercalative mode. Photocleavage experiments reveal that both two compounds employ 1O2-mediated mechanism in cleaving DNA and H2TMPyP can cleave DNA more efficiently than CTMPyP. Theoretical calculations were carried out with the density functional theory (DFT), and the calculated results indicate that the character and energies of some frontier orbitals of CTMPyP are quite different from those of H2TMPyP. These theoretical results can be used to explain their different DNA-binding modes and affinities to a certain extent.

DNA binding and photocleavage properties of a novel cationic porphyrin-anthraquinone hybrid.

A novel cationic porphyrin-anthraquinone (Por-AQ) hybrid has been synthesized and characterized. Using the combination of absorption titration, fluorescence spectra, circular dichroism (CD) as well as viscosity measurements, the binding properties of the hybrid to calf thymus (CT) DNA have been investigated compared with its parent porphyrin. The experimental results show that at low [Por]/[DNA] ratios, the parent porphyrin binds to DNA in an intercalative mode while the hybrid binds in a combined mode of outside binding (for porphyrin moiety) and partial intercalation (for anthraquinone). Ethidium bromide (EB) competition experiment determined the binding affinity constants (K(app)) of the compounds for CT DNA. Theoretical calculational results applying the density functional theory (DFT) can explain the different DNA binding behaviors reasonably. (1)O(2) was suggested to be the reactive species responsible for the DNA photocleavage of porphyrin moieties in both two compounds. The wavelength-depending cleavage activities of the compounds were also investigated.

Electronic and fluorescence spectral studies of a novel porphyrin-polypyridyl ruthenium(II) hybrid linked by a butyl chain.

The electronic and fluorescence spectroscopic properties of a novel porphyrin-polypyridyl ruthenium(II) hybrid, [C(4)-TPP-(ip)Ru(phen)(2)](ClO(4))(2) (TPP=5,10,15,20-tetraphenylporphyrin, ip=imidazo[4,5-f][1,10]phenanthroline and phen=1,10-Phenanthroline), in which a polypyridyl ruthenium(II) moiety is linked to a porphyrin moiety by a butyl chain have been investigated and compared to its corresponding reference compounds. The studies of electronic absorption spectra have shown that there is an electronic interaction between the porphyrin moiety and the polypyridyl ruthenium(II) moiety in the hybrid. It can be found that intramolecular photoinduced electron and energy transfer processes may occur in the hybrid from the fluorescence spectra. When exciting in Soret band and Q band of porphyrin, the fluorescence quenching of the porphyrin moiety of the hybrid takes place due to electron transfer from the lowest singlet excited state (S(1)) to the appended polypyridyl rutherium(II) moiety, while the decay of S(2) (the second-excited singlet state) of the porphyrin moiety is mainly contributed to internal conversion to S(1). When exciting in MLCT band of the polypyridyl ruthenium(II) moiety, fluorescence corresponding to the polypyridyl ruthenium(II) moiety is quenched by intramolecular energy transfer from (3)MLCT of the ruthenium moiety to the lowest-energy triplet state localized on the porphyrin moiety.

[Coordination bonding driving supramolecular self-assembly of tetraphenylporphyrinatozinc (II) with imidazolyl tailed porphyrinatoiron (III) studied by fluorescence spectra and 1H NMR].

Coordination bonding driving supramolecular self-assembly of Zn(TPP) with Fe(p-ImEPTPP)Cl was investigated by fluorescence spectra and 1H NMR. The results indicate that an obvious fluorescence quenching observed from Zn(TPP) by addition of Fe (p-ImEPTPP)Cl is due to the coordination of the terminal imidazolyl group of Fe(p-ImEQTPP)Cl to Zn2+ of Zn(TPP). The change of fluorescence spectra of Zn(TPP)/Fe(p-ImEPTPP)Cl system by adding some Lewis bases, such as piperidine, imidazole and pyridine, as well as 1H NMR further supported this coordination.

A fluorescence study of tetraphenylporphyrinatozinc(II)/imidazolyl-linked porphyrinatoiron(III) systems.

The fluorescence spectra of porphyrinatozinc(II)/iron(III) systems which consisted of tetraphenylporphyrinatozinc(II) and three kinds of imidazolyl-linked porphyrinatoiron(III) have been studied. An efficient fluorescence quenching of tetraphenylporphyrinatozinc(II) in the system was observed. Addition of a stronger organic base, such as piperdine, to the system can displace imidazolyl-linked porphyrinatoiron(III) and the fluorescence of the system restored partly. All these indicate the formation of porphyrinatozinc(II)/iron(III) supramolecular complex and coordination bonding formed by the coordination of imidazolyl group in imidazolyl-linked porphyrinatoiron(III) to Zn(II) in tetraphenyl-porphyrinatozinc(II) is the driving force of the supramolecular self-assembly. The association constants of the supramolecular complexes were calculated from the fluorescence spectroscopic titration data, and the differences among the association constants of the supramolecular complexes are discussed on the basis of the conformations which are dependent on the length of alkoxy chain linking imidazolyl group to porphyrinatoiron(III).