RÉSUMÉ
Melioration of the through-plane thermal conductivity (TC) of thermal interface materials (TIMs) is a sore need for efficient heat dissipation to handle an overheating concern of high-power-density electronics. Herein, we constructed a snail shell-like thermal conductive framework to facilitate vertical heat conduction in TIMs. With inspiration from spirally growing calcium carbonate platelets of snail shells, a facile double-microrod-assisted curliness method was developed to spirally coil boron nitride nanosheet (BNNS)/aramid nanofiber (ANF) laminates where interconnected BNNSs lie along the horizontal plane. Thus, vertical alignment of BNNSs in the resultant TIM was achieved, exhibiting a through-plane TC enhancement of â¼100% compared to the counterpart with randomly distributed BNNSs at the same BNNS addition (50 wt %). The Foygel's nonlinear model revealed that this unique snail shell-like BNNS framework reduced interfacial thermal resistance by 4 orders of magnitude. Our TIM showed superior interfacial thermal dissipation efficiency, leading to a temperature reduction of 42.6 °C for the LED chip compared to the aforementioned counterpart. Our work paves a valuable way for fabricating high-performance TIMs to ensure reliable operation of electrical devices.
RÉSUMÉ
Biodegradable polymer microspheres in bone tissue engineering have become appealing as their non-invasive advantages in irregular damage bone repair. However, current microspheres used in BTE still lack sufficient osteogenic capacity to induce effective bone regeneration. In this study, we developed osteogenic composite microspheres concurrently loaded with magnesium oxide (MgO) and zinc oxide (ZnO), both of which are osteogenic active substances, using a facile and scalable emulsification method. The osteogenic composite microspheres exhibited a sequential yet complementary release profile characterized by a rapid release of Mg2+ and a gradual release of Zn2+ in a physiological environment, thereby maintaining the concentration of bioactive ions at a sustained high level. As a result, the combination of Mg2+ and Zn2+ in the composite microspheres led to a synergistic enhancement in biomimetic mineralization and the upregulation in the expression of osteogenic-related genes and proteins at the cellular level. Through a critical-sized calvarial rate defect model, the osteogenic composite microspheres were demonstrated to have strong osteogenic ability to promote new bone formation via ultrasonic imaging, histological and immunohistochemical evaluations. In sum, these osteogenic composite microspheres as microcarriers of Mg2+ and Zn2+ have great potential in the delivery of therapeutic ions for treating bone defects.
Sujet(s)
Régénération osseuse , Magnésium , Microsphères , Ostéogenèse , Régénération osseuse/effets des médicaments et des substances chimiques , Ostéogenèse/effets des médicaments et des substances chimiques , Animaux , Magnésium/pharmacologie , Zinc/pharmacologie , Zinc/administration et posologie , Zinc/composition chimique , Oxyde de zinc/pharmacologie , Oxyde de zinc/composition chimique , Oxyde de zinc/administration et posologie , Oxyde de magnésium/pharmacologie , Oxyde de magnésium/composition chimique , Oxyde de magnésium/administration et posologie , Ingénierie tissulaire/méthodes , Matériaux biocompatibles/pharmacologie , SourisRÉSUMÉ
The effective regeneration of large bone defects via bone tissue engineering is challenging due to the difficulty in creating an osteogenic microenvironment. Inspired by the fibrillar architecture of the natural extracellular matrix, we developed a nanoscale bioengineering strategy to produce bone fibril-like composite scaffolds with enhanced osteogenic capability. To activate the surface for biofunctionalization, self-adaptive ridge-like nanolamellae were constructed on poly(ε-caprolactone) (PCL) electrospinning scaffolds via surface-directed epitaxial crystallization. This unique nanotopography with a markedly increased specific surface area offered abundant nucleation sites for Ca2+ recruitment, leading to a 5-fold greater deposition weight of hydroxyapatite than that of the pristine PCL scaffold under stimulated physiological conditions. Bone marrow mesenchymal stem cells (BMSCs) cultured on bone fibril-like scaffolds exhibited enhanced adhesion, proliferation, and osteogenic differentiation in vitro. In a rat calvarial defect model, the bone fibril-like scaffold significantly accelerated bone regeneration, as evidenced by micro-CT, histological histological and immunofluorescence staining. This work provides the way for recapitulating the osteogenic microenvironment in tissue-engineered scaffolds for bone repair.
Sujet(s)
Régénération osseuse , Cellules souches mésenchymateuses , Ostéogenèse , Polyesters , Ingénierie tissulaire , Structures d'échafaudage tissulaires , Animaux , Structures d'échafaudage tissulaires/composition chimique , Rats , Régénération osseuse/effets des médicaments et des substances chimiques , Cellules souches mésenchymateuses/cytologie , Ostéogenèse/effets des médicaments et des substances chimiques , Ostéogenèse/physiologie , Ingénierie tissulaire/méthodes , Polyesters/composition chimique , Différenciation cellulaire , Rat Sprague-Dawley , Matériaux biomimétiques/composition chimique , Matériaux biomimétiques/pharmacologie , Cellules cultivées , Prolifération cellulaire , Crâne/traumatismes , Crâne/anatomopathologie , Durapatite/composition chimique , Durapatite/pharmacologieRÉSUMÉ
BACKGROUND: Diabetes foot is one of the most serious complications of diabetes and an important cause of death and disability, traditional treatment has poor efficacy and there is an urgent need to develop a practical treatment method. AIM: To investigate whether Huangma Ding or autologous platelet-rich gel (APG) treatment would benefit diabetic lower extremity arterial disease (LEAD) patients with foot ulcers. METHODS: A total of 155 diabetic LEAD patients with foot ulcers were enrolled and divided into three groups: Group A (62 patients; basal treatment), Group B (38 patients; basal treatment and APG), and Group C (55 patients; basal treatment and Huangma Ding). All patients underwent routine follow-up visits for six months. After follow-up, we calculated the changes in all variables from baseline and determined the differences between groups and the relationships between parameters. RESULTS: The infection status of the three groups before treatment was the same. Procalcitonin (PCT) improved after APG and Huangma Ding treatment more than after traditional treatment and was significantly greater in Group C than in Group B. Logistic regression analysis revealed that PCT was positively correlated with total amputation, primary amputation, and minor amputation rates. The ankle-brachial pressure and the transcutaneous oxygen pressure in Groups B and C were greater than those in Group A. The major amputation rate, minor amputation rate, and total amputation times in Groups B and C were lower than those in Group A. CONCLUSION: Our research indicated that diabetic foot ulcers (DFUs) lead to major amputation, minor amputation, and total amputation through local infection and poor microcirculation and macrocirculation. Huangma Ding and APG were effective attreating DFUs. The clinical efficacy of Huangma Ding was better than that of autologous platelet gel, which may be related to the better control of local infection by Huangma Ding. This finding suggested that in patients with DFUs combined with coinfection, controlling infection is as important as improving circulation.
RÉSUMÉ
Three-dimensional (3D)-printed biodegradable polymer scaffolds are at the forefront of personalized constructs for bone tissue engineering. However, it remains challenging to create a biological microenvironment for bone growth. Herein, we developed a novel yet feasible approach to facilitate biomimetic mineralization via self-adaptive nanotopography, which overcomes difficulties in the surface biofunctionalization of 3D-printed polycaprolactone (PCL) scaffolds. The building blocks of self-adaptive nanotopography were PCL lamellae that formed on the 3D-printed PCL scaffold via surface-directed epitaxial crystallization and acted as a linker to nucleate and generate hydroxyapatite crystals. Accordingly, a uniform and robust mineralized layer was immobilized throughout the scaffolds, which strongly bound to the strands and had no effect on the mechanical properties of the scaffolds. In vitro cell culture experiments revealed that the resulting scaffold was biocompatible and enhanced the proliferation and osteogenic differentiation of mouse embryolous osteoblast cells. Furthermore, we demonstrated that the resulting scaffold showed a strong capability to accelerate in vivo bone regeneration using a rabbit bone defect model. This study provides valuable opportunities to enhance the application of 3D-printed scaffolds in bone repair, paving the way for translation to other orthopedic implants.
Sujet(s)
Ostéogenèse , Structures d'échafaudage tissulaires , Souris , Animaux , Lapins , Structures d'échafaudage tissulaires/composition chimique , Biomimétique , Régénération osseuse , Polyesters/composition chimique , Ingénierie tissulaire , Impression tridimensionnelleRÉSUMÉ
Structural engineering is an appealing means to modulate osteogenesis without the intervention of exogenous cells or therapeutic agents. In this work, a novel 3D scaffold with anisotropic micropores and nanotopographical patterns is developed. Scaffolds with oriented pores are fabricated via the selective extraction of water-soluble polyethylene oxide from its poly(ε-caprolactone) co-continuous mixture and uniaxial stretching. The plate apatite-like lamellae are subsequently hatched on the pore walls through surface-induced epitaxial crystallization. Such a unique geometric architecture yields a synergistic effect on the osteogenic capability. The prepared scaffold leads to a 19.2% and 128.0% increase in the alkaline phosphatase activity of rat bone mesenchymal stem cells compared to that of the scaffolds with only oriented pores and only nanotopographical patterns, respectively. It also induces the greatest upregulation of osteogenic-related gene expression in vitro. The cranial defect repair results demonstrate that the prepared scaffold effectively promotes new bone regeneration, as indicated by a 350% increase in collagen I expression in vivo compared to the isotropic porous scaffold without surface nanotopology after implantation for 14 weeks. Overall, this work provides geometric motifs for the transduction of biophysical cues in 3D porous scaffolds, which is a promising option for tissue engineering applications.
Sujet(s)
Régénération osseuse , Cellules souches mésenchymateuses , Ostéogenèse , Structures d'échafaudage tissulaires , Animaux , Structures d'échafaudage tissulaires/composition chimique , Régénération osseuse/effets des médicaments et des substances chimiques , Rats , Cellules souches mésenchymateuses/cytologie , Cellules souches mésenchymateuses/métabolisme , Porosité , Ostéogenèse/effets des médicaments et des substances chimiques , Anisotropie , Ingénierie tissulaire/méthodes , Polyesters/composition chimique , Rat Sprague-Dawley , Matériaux biomimétiques/composition chimique , Matériaux biomimétiques/pharmacologie , Mâle , Phosphatase alcaline/métabolisme , CrâneRÉSUMÉ
The treatment of infected wounds faces substantial challenges due to the high incidence and serious infection-related complications. Natural-based hydrogel dressings with favorable antibacterial properties and strong applicability are urgently needed. Herein, we developed a composite hydrogel by constructing multiple networks and loading ciprofloxacin for infected wound healing. The hydrogel was synthesized via a Schiff base reaction between carboxymethyl chitosan and oxidized sodium alginate, followed by the polymerization of the acrylamide monomer. The resultant hydrogel dressing possessed a good self-healing ability, considerable compression strength, and reliable compression fatigue resistance. In vitro assessment showed that the composite hydrogel effectively eliminated bacteria and exhibited an excellent biocompatibility. In a model of Staphylococcus aureus-infected full-thickness wounds, wound healing was significantly accelerated without scars through the composite hydrogel by reducing wound inflammation. Overall, this study opens up a new way for developing multifunctional hydrogel wound dressings to treat wound infections.
Sujet(s)
Chitosane , Hydrogels , Hydrogels/pharmacologie , Cicatrisation de plaie , Antibactériens/pharmacologie , Ciprofloxacine , BandagesRÉSUMÉ
Periodontitis is a common oral disease accompanied by inflammatory bone loss. The pathological characteristics of periodontitis usually accompany an imbalance in the periodontal immune microenvironment, leading to difficulty in bone regeneration. Therefore, effective treatment strategies are needed to modulate the immune environment in order to treat periodontitis. Here, highly-oriented periodic lamellae poly(ε-caprolactone) electrospun nanofibers (PLN) are developed by surface-directed epitaxial crystallization. The in vitro result shows that the PLN can precisely modulate macrophage polarization toward the M2 phenotype. Macrophages polarized by PLN significantly enhance the migration and osteogenic differentiation of Bone marrow stromal cells. Notably, results suggest that the topographical cues presented by PLN can modulate macrophage polarization by activating YAP, which reciprocally inhibits the NF-κB signaling pathway. The in vivo results indicate that PLN can inhibit inflammatory bone loss and facilitate bone regeneration in periodontitis. The authors' findings suggest that topographical nanofibers with periodic lamellae is a promising strategy for modulating immune environment to treat inflammatory bone loss in periodontitis.
Sujet(s)
Nanofibres , Ostéogenèse , Parodontite , Polyesters , Nanofibres/composition chimique , Parodontite/thérapie , Parodontite/anatomopathologie , Parodontite/immunologie , Parodontite/traitement médicamenteux , Animaux , Souris , Polyesters/composition chimique , Ostéogenèse/effets des médicaments et des substances chimiques , Cellules RAW 264.7 , Macrophages/immunologie , Macrophages/effets des médicaments et des substances chimiques , Macrophages/métabolisme , Régénération osseuse/effets des médicaments et des substances chimiques , Différenciation cellulaire/effets des médicaments et des substances chimiques , Facteur de transcription NF-kappa B/métabolisme , Cellules souches mésenchymateuses/immunologie , Immunomodulation/effets des médicaments et des substances chimiques , Transduction du signal/effets des médicaments et des substances chimiques , Protéines adaptatrices de la transduction du signal/métabolisme , Protéines adaptatrices de la transduction du signal/immunologie , Souris de lignée C57BL , Mâle , Inflammation/anatomopathologie , Protéines de signalisation YAPRÉSUMÉ
Currently, biomineralization is widely used as a surface modification approach to obtain ideal material surfaces with complex hierarchical nanostructures, morphologies, unique biological functions, and categorized organizations. The fabrication of biomineralized coating for the surfaces of scaffolds, especially synthetic polymer scaffolds, can alter surface characteristics, provide a favorable microenvironment, release various bioactive substances, regulate the cellular behaviors of osteoblasts, and promote bone regeneration after implantation. However, the biomineralized coating fabricated by immersion in a simulated body fluid has the disadvantages of non-uniformity, instability, and limited capacity to act as an effective reservoir of bioactive ions for bone regeneration. In this study, in order to promote the osteoinductivity of 3D-printed PCL scaffolds, we optimized the surface biomineralization procedure by nano-topographical guidance. Compared with biomineralized coating constructed by the conventional method, the nano-topographically guided biomineralized coating possessed more mineral substances and firmly existed on the surface of scaffolds. Additionally, nano-topographically guided biomineralized coating possessed better protein adsorption and ion release capacities. To this end, the present work also demonstrated that nano-topographically guided biomineralized coating on the surface of 3D-printed PCL scaffolds can regulate the cellular behaviors of USCs, guide the osteogenic differentiation of USCs, and provide a biomimetic microenvironment for bone regeneration.
RÉSUMÉ
Cellulose-based polymer scaffolds are highly diverse for designing and fabricating artificial bone substitutes. However, realizing the multi-biological functions of cellulose-based scaffolds has long been challenging. In this work, inspired by the structure and function of the extracellular matrix (ECM) of bone, we developed a novel yet feasible strategy to prepare ECM-like scaffolds with hybrid calcium/zinc mineralization. The 3D porous structure was formed via selective oxidation and freeze drying of bacterial cellulose. Following the principle of electrostatic interaction, calcium/zinc hybrid hydroxyapatite nucleated, crystallized, and precipitated on the 3D scaffold in simulated physiological conditions, which was well confirmed by morphology and composition analysis. Compared with alternative scaffold cohorts, this hybrid ion-loaded cellulose scaffold exhibited a pronounced elevation in alkaline phosphatase (ALP) activity, osteogenic gene expression, and cranial defect regeneration. Notably, the hybrid ion-loaded cellulose scaffold effectively fostered an M2 macrophage milieu and had a strong immune effect in vivo. In summary, this study developed a hybrid multifunctional cellulose-based scaffold that appropriately simulates the ECM to regulate immunomodulatory and osteogenic differentiation, setting a measure for artificial bone substitutes.
Sujet(s)
Substituts osseux , Ostéogenèse , Ostéogenèse/génétique , Calcium/métabolisme , Structures d'échafaudage tissulaires/composition chimique , Cellulose/pharmacologie , Cellulose/métabolisme , Zinc/pharmacologie , Régénération osseuse , Durapatite/métabolisme , Matrice extracellulaire/métabolismeRÉSUMÉ
The complication of diabetes, which is known as diabetic foot ulcer (DFU), is a significant concern due to its association with high rates of disability and mortality. It not only severely affects patients' quality of life, but also imposes a substantial burden on the healthcare system. In spite of efforts made in clinical practice, treating DFU remains a challenging task. While mesenchymal stem cell (MSC) therapy has been extensively studied in treating DFU, the current efficacy of DFU healing using this method is still inadequate. However, in recent years, several MSCs-based drug delivery systems have emerged, which have shown to increase the efficacy of MSC therapy, especially in treating DFU. This review summarized the application of diverse MSCs-based drug delivery systems in treating DFU and suggested potential prospects for the future research.
RÉSUMÉ
Objective: Objectively and efficiently measuring physical activity is a common issue facing the fields of medicine, public health, education, and sports worldwide. In response to the problem of low accuracy in predicting energy consumption during human motion using accelerometers, a prediction model for asynchronous energy consumption in the human body is established through various algorithms, and the accuracy of the model is evaluated. The optimal energy consumption prediction model is selected to provide theoretical reference for selecting reasonable algorithms to predict energy consumption during human motion. Methods: A total of 100 subjects aged 18-30 years participated in the study. Experimental data for all subjects are randomly divided into the modeling group (n = 70) and validation group (n = 30). Each participant wore a triaxial accelerometer, COSMED Quark pulmonary function tester (Quark PFT), and heart rate band at the same time, and completed the tasks of walking (speed range: 2 km/h, 3 km/h, 4 km/h, 5 km/h, and 6 km/h) and running (speed range: 7 km/h, 8 km/h, and 9 km/h) sequentially. The prediction models were built using accelerometer data as the independent variable and the metabolic equivalents (METs) as the dependent variable. To calculate the prediction accuracy of the models, root mean square error (RMSE) and bias were used, and the consistency of each prediction model was evaluated based on Bland-Altman analysis. Results: The linear equation, logarithmic equation, cubic equation, artificial neural network (ANN) model, and walking-and-running two-stage model were established. According to the validation results, our proposed walking-and-running two-stage model showed the smallest overall EE prediction error (RMSE = 0.76 METs, Bias = 0.02 METs) and the best performance in Bland-Altman analysis. Additionally, it had the lowest error in predicting EE during walking (RMSE = 0.66 METs, Bias = 0.03 METs) and running (RMSE = 0.90 METs, Bias < 0.01 METs) separately, as well as high accuracy in predicting EE at each single speed. Conclusion: The ANN-based walking-and-running two-stage model established by separating walking and running can better estimate the walking and running EE, the improvement of energy consumption prediction accuracy will be conducive to more accurate to monitor the energy consumption of PA.
RÉSUMÉ
Periodontitis is a worldwide bacterial infectious disease, resulting in the resorption of tooth-supporting structures. Biodegradable polymeric microspheres are emerging as an appealing local therapy candidate for periodontal defect regeneration but suffer from tedious procedures and low yields. Herein, we developed a facile yet scalable approach to prepare polylactide composite microspheres with outstanding drug-loading capability. It was realized by blending equimolar polylactide enantiomers at the temperature between the melting point of homocrystallites and stereocomplex (sc) crystallites, enabling the precipitation of sc crystallites in the form of microspheres. Meanwhile, epigallocatechin gallate (EGCG) and nano-hydroxyapatite were encapsulated in the microspheres in the designated amount. Such an assembly allowed the fast and sustained release of EGCG and Ca2+ ions. The resultant hybrid composite microspheres not only exhibited strong antimicrobial activity against typical oral pathogens (Porphyromonas gingivalis and Enterococcus faecalis), but also directly promoted osteogenic differentiation of periodontal ligament stem cells with good cytocompatibility. These dual-functional composite microspheres offer a desired drug delivery platform to address the practical needs for periodontitis treatment.
Sujet(s)
Ostéogenèse , Desmodonte , Microsphères , Cellules souches , Différenciation cellulaireRÉSUMÉ
Vigorous-intensity leisure-time physical activity, such as marathon, has become increasingly popular, but its effect on immune functions and health is poorly understood. Here, we performed scRNA-seq analysis of peripheral blood mononuclear cells (PBMCs) after a bout of symptom-limited cardiopulmonary exercise (CPX) test or marathon. Time-series single-cell analysis revealed the detailed series of landscapes of immune cells in response to short and long vigorous-intensity activities. Reduction of effective T cells was observed with the cell migration and motility pathways enriched in circulation following marathon. Baseline values of PBMCs abundance were reached around 1 h after CPX and 24 h following marathon, but longer time was required for expression recovery of cytotoxicity genes. The ratio of effector/naive T cells was found to change uniformly among the participants and could serve as a better indicator for exercise intensity than the CD4+/CD8+ T cell ratio. Moreover, we identified time-dependent monocyte state transitions after marathon.
RÉSUMÉ
Senile osteoporotic fracture has aroused increasing attention due to high morbidity and mortality. However, to date, there is no effective therapeutic approach available. Senile osteoporosis is characterized by impaired osteogenesis and angiogenesis, osteoporotic fracture repair could also be promoted by enhancing osteogenesis and angiogenesis. Tetrahedral framework nucleic acids (tFNAs) are a multifunctional nanomaterial that have recently been extensively used in biomedical fields, which could enhance osteogenesis and angiogenesis in vitro. Therefore, we applied tFNAs to intact and femoral fractural senile osteoporotic mice, respectively, to evaluate the effects of tFNAs on senile osteoporosis and osteoporotic fracture repair regarding the osteogenesis and angiogenesis of the callus at the early healing stages and to initially explore the potential mechanism. The outcomes showed that tFNAs had no significant effects on the osteogenesis and angiogenesis of the femur and mandible in intact senile osteoporotic mice within 3 weeks after tFNA treatment, while tFNAs could promote osteogenesis and angiogenesis of callus in osteoporotic fracture repair, which may be regulated by a FoxO1-related SIRT1 pathway. In conclusion, tFNAs could promote senile osteoporotic fracture repair by enhancing osteogenesis and angiogenesis, offering a new strategy for the treatment of senile osteoporotic fracture.
Sujet(s)
Acides nucléiques , Ostéoporose , Fractures ostéoporotiques , Souris , Animaux , Ostéogenèse , Fractures ostéoporotiques/thérapie , Consolidation de fracture , Acides nucléiques/pharmacologie , Ostéoporose/traitement médicamenteuxRÉSUMÉ
Vitamin E (VE) is currently an approved antioxidant to improve the oxidation stability of highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) insert used commercially in total joint arthroplasty. However, the decrease in crosslink density caused by VE reduces wear resistance of UHMWPE, showing an uncoordinated challenge. In this work, we hypothesized that D-sorbitol (DS) as a secondary antioxidant can improve the antioxidant efficacy of VE on chemically crosslinked UHMWPE. The combined effect of VE and DS on oxidation stability of UHMWPE was investigated at a set of controlled hybrid antioxidant content. The hybrid antioxidant strategy showed significantly synergistic enhancement on the oxidation stability of chemically crosslinked UHMWPE compared with the single VE strategy. More strikingly, the crosslink density of the blends with hybrid antioxidants stayed at a high level since DS is not sensitive to crosslinking. The relationships between oxidation stability, mechanical properties, crosslink density, and crystallinity were investigated, by which the clinically relevant overall performance of UHMWPE was optimized. This work provides a leading-edge design mean for the development of joint bearings.
Sujet(s)
Antioxydants , Polyéthylènes , Antioxydants/composition chimique , Masse moléculaire , Test de matériaux , Polyéthylènes/composition chimique , Vitamine E/composition chimiqueRÉSUMÉ
Multiple-pathogen periodontal disease necessitates a local release and concentration of antibacterial medication to control inflammation in a particular location of the mouth cavity. Therefore, it is necessary to effectively load and deliver medicine/antibiotics to treat numerous complex bacterial infections. This study developed chlorhexidine (CHX)/polycaprolactone (PCL) nanofiber membranes with controlled release properties as periodontal dressings to prevent or treat oral disorders. Electrostatic spinning was adopted to endow the nanofiber membranes with a high porosity, hydrophilicity, and CHX loading capability. The release of CHX occurred in a concentration-dependent manner. The CHX/PCL nanofiber membranes exhibited good biocompatibility with human periodontal ligament stem cells, with cell viability over 85% in each group via CCK-8 assay and LIVE/DEAD staining; moreover, the good attachment of the membrane was illustrated by scanning electron microscopy imaging. Through the agar diffusion assay, the nanofiber membranes with only 0.075 wt% CHX exhibited high antibacterial activity against three typical oral infection-causing bacteria: Porphyromonas gingivalis, Enterococcus faecalis, and Prevotella intermedia. The results indicated that the CHX/PCL nanofiber holds great potential as a periodontal dressing for the prevention and treatment periodontal disorders associated with bacteria.
RÉSUMÉ
3D-printing technology can be used to construct personalized bone substitutes with customized shapes, but it cannot regulate the topological morphology of the scaffold surface, which plays a vital role in regulating the biological behaviors of stem cells. In addition, stem cells are able to sense the topographical and mechanical cues of surface of scaffolds by mechanosensing and mechanotransduction. In our study, we fabricated a 3D-printed poly(ε-caprolactone) (PCL) scaffold with a nanotopographical surface and loaded it with urine-derived stem cells (USCs) for application of bone regeneration. The topological 3D-printed PCL scaffolds (TPS) fabricated by surface epiphytic crystallization, possessed uniformly patterned nanoridges, of which the element composition and functional groups of nanoridges were the same as PCL. Compared with bare 3D-printed PCL scaffolds (BPS), TPS have a higher ability for protein adsorption and mineralization in vitro. The proliferation, cell length, and osteogenic gene expression of USCs on the surface of TPS were significantly higher than that of BPS. In addition, the TPS loaded with USCs exhibited a good ability for bone regeneration in cranial bone defects. Our study demonstrated that nanotopographical 3D-printed scaffolds loaded with USCs are a safe and effective therapeutic strategy for bone regeneration.
RÉSUMÉ
Gliomas are a group of the most aggressive primary central nervous system tumors with limited treatment options. The abnormal expression of long non-coding RNA (lncRNA) is related to the prognosis of glioma. However, the role of endoplasmic reticulum (ER) stress-associated lncRNAs in glioma prognosis has not been reported. In this paper, we obtained ER stress-related lncRNAs by co-expression analysis, and then a risk signature composed of 6 ER stress-related lncRNAs was constructed using Cox regression analysis. Glioma samples in The Cancer Genome Atlas (TCGA) were separated into high- and low-risk groups based on the median risk score. Compared with the low-risk group, patients in the high-risk group had shorter survival times. Additionally, we verified the predictive ability of these candidate lncRNAs in the testing set. Three glioma patient subgroups (cluster 1/2/3) were identified by consensus clustering. We further analysed the abundance of immune-infiltrating cells and the expression levels of immune checkpoint molecules in both three subgroups and two risk groups, respectively. Immunotherapy and anticancer drug response prediction showed that ER stress-related lncRNA risk signature positively correlates with responding to immune checkpoints and chemosensitivity. Functional analysis showed that these gene sets are enriched in the malignant process of tumors. Finally, LINC00519 was chosen for functional experiments. The silence of LINC00519 restrained the migration and invasion of glioma cells. Hence, those results indicated that ER stress-related lncRNA risk signature could be a potential treatment target and a prognosis biomarker for glioma patients.
RÉSUMÉ
The combined use of two or more different drugs can better promote nerve recovery and its prognosis for treatment of stroke. Salvianolate lyophilized injection (SLI) made from the aqueous extraction of salvia miltiorrhiza and Xueshuantong injection (lyophilized) (XST) made from the Panax Notoginseng extraction are two herbal standardized preparations that have been widely used in China for the treatment of ischemic stroke. In this study, we investigated the neuroprotective effects of XST combined with SLI in the recovery stage of middle cerebral artery occlusion / reperfusion (MCAO/R) injury rat. Wistar rats were subjects to MCAO/R, then were treated with SLI or XST alone, or with their combination (1X1S) via tail injection daily for 14 days. The pathological status of the brain was detected by neurological deficit scores, TTC, regional cerebral blood flow and Nissl staining. Golgi-Cox staining was used to assess dendritic, axonal and synaptic remodeling. The expression of MAP-2, ß-Tubulin, PSD95, SYN, BDNF and VEGF were analyzed by western blotting and immunofluorescence. The results showed that administration of 1X1S not only significantly decreased neurological scores and infarct volumes, but also increased regional cerebral blood flow, strengthened dendritic and synaptic remodeling compared with XST, SLI used alone. And the mechanism of combined of 1X1S to exert neuroprotection may be associated with PI3K/ AKT/ mTOR and RhoA/ROCK2 pathways. Overall, these findings suggest that combination of XST and SLI promotes dendritic spine density and synaptic plasticity via upregulation of the PI3K/ AKT/ mTOR pathways and inhabitation the RhoA/ROCK2 signaling pathway in rat with MCAO/R, showing its multiple-action-multiple-target efficacy and suggest a potential new strategy for ischemia.