Amphipathic Astaxanthin Additive for Low Voltage-loss Perovskite Solar Cells With Enhanced Quasi-Fermi Level Splitting and Solar Hydrogen Production Application.

Even though the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is nearly approaching the Schottky-Queisser limit, low open-circuit voltage (Voc) and severe Voc loss problems continue to impede the improvement of PCEs. Astaxanthin (ASTA) additive is introduced in the formamidinium lead triiodide (FAPbI3) perovskite film as an additive, which can facilitate the transportation of charge carriers and interact with Pb2+ by its distinctive groupings. Furthermore, the addition of ASTA decreases the defect's active energy, regulates the deep-level defect by filling up the grain boundaries (GBs), and promotes the crystallization of perovskite film. Remarkably, an enhanced quasi-Fermi level splitting (QFLS) of 1.164 eV and a reduced Voc loss of only 96 mV are realized. The champion PCE of 24.56% is attained by ASTA-modified PSCs on the basis of 22.75% PCE. Moreover, the PSCs that underwent ASTA modification demonstrate improved operational stability, ensuring consistent output in real-world scenarios. Furthermore, PSCs with an active area of 1 cm2 are used for water electrolysis to produce hydrogen and exhibit a PCE of 22.41%. This work offers an environmentally benign solution to address the inherent issues of FAPbI3 PSCs and lays the groundwork for the development of a prospective solar hydrogen production application.

Enhancing Efficiency and Durability of Perovskite Solar Cells with Chlorine-Functionalized Fully Conjugated Porous Aromatic Framework.

Non-radiative recombination, caused by trap states, significantly hampers the efficiency and stability of perovskite solar cells (PSCs). The emerging porous organic polymers (POPs) show promise as a platform for designing novel defect passivation agents due to their rigid and porous structure. However, the POPs reported so far lack either sufficient stability or clear sites of interactions with the defects. Herein, two chlorine-functionalized, fully conjugated porous aromatic frameworks (PAFs) were constructed via a decarbonylation reaction. The chlorinated PAFs feature unique long-range conjugated networks bearing multiple chlorine atoms, significantly improving the photovoltaic performance and stability of doped solar cells. Combined experimental and theoretical analyses confirmed the strong passivation effects of conjugated structure to the defect through Cl sites. Specifically, PAF-159, bearing a triphenylamine moiety, demonstrated stronger Cl-Pb bonding and higher passivation efficiency due to the presence of π* anti-bonding orbitals, which elevate the HOMO energy level and facilitate Cl-Pb charge transfer. Consequently, we obtained high-performance PAF-159-doped devices with advanced PCE (24.3%), good storage stability (retaining 86% after 3000 hours), and good long-term operational stability (retaining 92% after 350 hours).

Crystallinity Regulation and Defects Passivation for Efficient and Stable Perovskite Solar Cells Using Fully Conjugated Porous Aromatic Frameworks.

Fully conjugated porous aromatic frameworks (PAFs) have been constructed through Gilch reaction. The obtained PAFs have rigid conjugated backbones, high specific surface area, and excellent stability. The prepared PAF-154 and PAF-155 have been successfully applied in the perovskite solar cells (PSCs) by doping into the perovskite layer. The champion PSC devices afford a power conversion efficiency of 22.8 % and 22.4 %. It is found that the PAFs can be used as an efficient nucleation template, thus regulating the perovskite crystallinity. Meanwhile, PAFs can also passivate defects and promote carriers transporting in the perovskite film. By the comparative study with their linear counterpart, we unravel that the efficacy of PAFs is highly related to their porous structure and rigid fully conjugated networks. The unencapsulated devices with PAFs doping exhibit outstanding long-term stability, retaining 80 % of their initial efficiencies after half-year storage in ambient conditions.

Tailored preparation of porous aromatic frameworks in a confined environment.

The growth of porous aromatic frameworks (PAFs) on the surface of polymer brushes is reported for the first time. In contrast to PAFs formed in solution, polymer brushes provide a confined environment for PAF growth, resulting in nanosized and homogeneous spherical PAFs formed amongst the polymer brushes. 4-Bromobenzene functionalities from the polymer brushes are utilized to induce PAF growth by a Yamamoto-type Ullman coupling reaction. The size of PAFs can be tailored from 30 nm to 500 nm by subtly changing the structural parameters: e.g. reaction time, grafting density, and concentration of 4-bromobenzene on the surface. The established strategy is not only applicable to the preparation of PAF-1, but can also be extended to the controlled preparation of PAF-5. In addition, free-standing and flexible PS/PAF-1 hybrid membranes are obtained via dissolving the oxidized layer between the polymer layer and the silicon substrate, which can be transferred to any flat substrate. The obtained PS/PAF-1 membrane is proven to show high efficiency in removing dye from water and is promising for eliminating other foulants, such as microorganisms and trace organics.