Do we need another screw? Sacroiliac screw fixation in open-book pelvic ring injuries (APC type II).

Purpose: To compare anterior plate fixation (SP fixation) both alone and in combination with an additional posterior sacroiliac screw (SP+SIS fixation) as a treatment for pelvic ring injuries with widening of the pubic symphysis and disruption to the anterior sacroiliac ligaments. Methods: To find studies with pelvic ring injuries (APC II; B2.3d) and SP or SP+SIS fixation, a systematic literature review was conducted by searching four databases. A protocol was published a priori at Open Science Framework (https://doi.org/10.17605/OSF.IO/3YHAV). Exclusion criteria included perineal injuries, chronic instability of the symphysis, complete sacroiliac separation, and pediatric patients (age <18 years). Primary outcomes of interest were defined as implant failure, health-related quality of life, and revision rate. Results: Altogether, 1861 studies were screened, and 40 studies qualified for full-text analysis. In total, 14 studies (two surveys, six biomechanical studies, and six retrospective clinical studies) were included. The surveys revealed that surgeons who had more recently begun practicing were more likely to use posterior fixation (SP+ISS). The biomechanical studies were heterogenous and did not yield a uniform pattern. In clinical studies, 117 patients (45%) received SP fixation, and 142 patients (55%) received SP+SIS fixation. Complications occurred in 31 SP patients (30%) and in five SP+SIS patients (3.5%). Conclusion: A high risk of bias was uncovered, and reporting was found to be incomplete. SP+SIS may have the potential to improve outcomes, but the evidence remains too inconclusive to draw reliable recommendations.

Is nail-plate docking worth the effort? A biomechanical analysis of docking a plate and a nail in peri-implant femur fractures.

Purpose: The ideal treatment of peri-implant femur fractures (PIFFs) remains unclear due to the thin clinical and biomechanical evidence concerning the most suitable form of osteosynthesis. The purpose of the present study was thus to determine the biomechanical stability that results from combining a cephalomedullary nail and a plate for proximal PIFFs, especially when the nail-plate docking technique is applied. Methods: Twenty four PIFFs were simulated in both 12 foam and 12 composite specimens and were stabilized via a combination of a cephalomedullary nail and a plate. The control group (n = 6) had a nail and a plate without a connection, while the intervention group (n = 6) had a screw that connected the plate with the interlocking screw hole of the nail, thereby creating a nail-plate docking system. The specimens were evaluated under axial and torsional loading using a material-testing machine and a 3D metrology system. Results: The data regarding stiffness, failure load, and failure displacement showed significantly higher stability for specimens without nail-plate docking. For docked specimens, a non-significant trend toward a higher resistance to torque was observed. Both techniques displayed no significant difference in fracture gap displacement or total displacement. Conclusion: The present study suggests that nail-plate docking of a cephalomedullary nail, and a plate significantly decreases the stiffness and stability of osteosynthesis under axial loading. However, there seems to be a tendency toward higher resistance to torque. Therefore, surgeons should consider this technique if higher torsional stability is necessary, and they should decide against it, if axial stability is preferred.

Developing a core outcome set for acetabular fractures: a systematic review protocol.

BACKGROUND: Clinical trials investigating acetabular fractures are heterogeneous in their investigated outcomes and their corresponding measurements. Standardization may facilitate comparability and pooling of research results, which would lead to an increase in knowledge about the optimal treatment of acetabular fractures, resulting in long-term evidence-based treatment decisions and improvements in patient care. The aim of this systematic review is to identify the reported outcomes and their measurements from studies on treatments for acetabular fractures to develop a core outcome set which contains the most relevant outcome measures to be included in future studies. METHODS: Studies published in English and German including patients aged 16 years and older, with a surgically treated acetabular fracture, will be included. Studies with nonsurgical treatment, pathologic fractures, polytraumatized patients, and patients younger than 16 years of age will be excluded because other outcomes may be of interest in these cases. Any prospective and retrospective study will be included. Systematic reviews will be excluded, but their included studies will be screened for eligibility. The literature will be searched on MEDLINE, CENTRAL, Web of Science, ClinicalTrials.gov, and WHO ICTRP. Risk of selective reporting of outcomes will be assessed using the Outcome Reporting Bias in Trials classification system. Heterogeneously defined outcomes that measure the same outcome will be grouped and subsequently categorized into outcome domains using the taxonomy of the Core Outcome Measures in Effectiveness Trials Initiative. DISCUSSION: It is expected that a high number of studies will be included, and many outcomes will be identified using different definitions and measurement instruments. A limitation of this systematic review is that only previously investigated outcomes will be detected, thus disregarding potentially relevant outcomes. SYSTEMATIC REVIEW REGISTRATION: PROSPERO CRD42022357644.

[Analysis of a differentiated resuscitation room activation at a national trauma center]. / Analyse einer differenzierten Schockraumalarmierung an einem überregionalen Traumazentrum.

BACKGROUND: In order to continue to efficiently provide both personnel-intensive and resource-intensive care to severely injured patients, some hospitals have introduced individually differentiated systems for resuscitation room treatment. The aim of this study was to evaluate the concept of the A and B classifications in terms of practicability, indications, and potential complications at a national trauma center in Bavaria. METHODS: In a retrospective study, data from resuscitation room trauma patients in the year 2020 were collected. The assignment to A and B was made by the prehospital emergency physician. Parameters such as the injury severity score (ISS), Glasgow outcome scale (GOS), upgrade rate, and the indication criteria according to the S3 guidelines were recorded. Statistical data comparisons were made using t­tests, χ2-tests, or Mann-Whitney U­tests. RESULTS: A total of 879 resuscitation room treatments (A 473, B 406) met the inclusion criteria. It was found that 94.5% of resuscitation room A cases had physician accompaniment, compared to 48% in resuscitation room B assignments. In addition to significantly lower ISS scores (4.1 vs. 13.9), 29.8% of B patients did not meet the treatment criteria defined in the S3 guidelines. With a low upgrade rate of 4.9%, 98% of B patients had a GOS score of 4 or 5. CONCLUSION: The presented categorization is an effective and safe way to manage the increasing number of resuscitation room alerts in a resource-optimized manner.

Impact of a Femoral Fracture on Outcome after Traumatic Brain Injury-A Matched-Pair Analysis of the TraumaRegister DGU®.

Traumatic brain injury (TBI) is the leading cause of death and disability in polytrauma and is often accompanied by concomitant injuries. We conducted a retrospective matched-pair analysis of data from a 10-year period from the multicenter database TraumaRegister DGU® to analyze the impact of a concomitant femoral fracture on the outcome of TBI patients. A total of 4508 patients with moderate to critical TBI were included and matched by severity of TBI, American Society of Anesthesiologists (ASA) risk classification, initial Glasgow Coma Scale (GCS), age, and sex. Patients who suffered combined TBI and femoral fracture showed increased mortality and worse outcome at the time of discharge, a higher chance of multi-organ failure, and a rate of neurosurgical intervention. Especially those with moderate TBI showed enhanced in-hospital mortality when presenting with a concomitant femoral fracture (p = 0.037). The choice of fracture treatment (damage control orthopedics vs. early total care) did not impact mortality. In summary, patients with combined TBI and femoral fracture have higher mortality, more in-hospital complications, an increased need for neurosurgical intervention, and inferior outcome compared to patients with TBI solely. More investigations are needed to decipher the pathophysiological consequences of a long-bone fracture on the outcome after TBI.

[The severely injured older cyclist-Evaluation of the TraumaRegister DGU® : Retrospective, multicenter cross-sectional study based on the TraumaRegister DGU®]. / Der schwer verletzte ältere Fahrradfahrer ­ Auswertung des TraumaRegister DGU® : Retrospektive, multizentrische Querschnittstudie anhand des TraumaRegister DGU®.

BACKGROUND: Contrary to the trend of decreasing traffic fatalities, the number of cyclists killed in Germany has been steadily increasing in recent years. With the increasing popularity of cycling in all age groups, the number of accidents with sometimes serious injuries is rising. In the course of this, the question arises what influence age has on the type and severity of injuries, the probability of survival and the length of hospital stay in seriously injured cyclists. METHODS: A retrospective analysis of data from the TraumaRegister DGU® (TR-DGU) from 2010 to 2019 was performed. All severely injured cyclists with a maximum abbreviated injury scale (MAIS) of 3+ (n = 14,651) in the TR-DGU were included in this study and the available parameters were evaluated. A subdivision into three age groups (60-69, 70-79, and ≥ 80 years) and a control group (20-59 years) was carried out. RESULTS: Injuries to the head were by far the most common, accounting for 64.2%. There was a marked increase in severe head injuries in the 60-plus years age group. Furthermore, with increasing age, the probability of prehospital intubation, catecholamine requirement, intensive care and hospital length of stay, and mortality increased. CONCLUSION: Head injuries represent the most common serious injury, especially among older cyclists. As helmet wearing was not recorded in the TraumaRegister DGU® during the evaluation period, no conclusion can be drawn about its effect. Furthermore, a higher age correlates with a longer hospital stay and a higher mortality, but does not represent an independent risk factor for death in severely injured patients.

Gantry-Free High-Resolution Cone-Beam CT: Efficacy for Distal Radius and Scaphoid Fracture Detection and Characterization.

OBJECTIVES: Gantry-free cone-beam CT (CBCT) allows for comfortable patient positioning due to an open scanner architecture. Since CBCT without gantry is not yet established for clinical wrist trauma imaging, this study's aim was to investigate its diagnostic value in the preoperative workup of patients with distal radius and scaphoid fractures. METHODS: Within a 12-month period, 113 patients with severe wrist trauma underwent both radiography and CBCT with the same gantry-free multi-use scanner before surgery. Two radiologists retrospectively analyzed all datasets for the morphology of distal radius (n = 95) and scaphoid fractures (n = 20). In all 115 wrists (two bilateral injuries), surgical reports served as the standard of reference. RESULTS: While accuracy for distal radius fractures was comparable among CBCT and radiographs, the former was superior with regard to scaphoid fractures (Reader 1: 100.0% vs. 75.0%; Reader 2: 100.0% vs. 65.0%). Accuracy for multi-fragmentary radius injuries (100.0% vs. 90.5%; 100.0% vs. 93.7%), and articular affliction (99.0% vs. 84.2%; 100.0% vs. 83.2%) was also higher in CBCT. Regarding scaphoid fractures, CBCT proved superior for diagnosis of proximal pole or waist involvement (100.0% vs. 70.0%; 100.0% vs. 65.0%) and comminuted patterns (100.0% vs. 70.0%; 100.0% vs. 75.0%). Median effective dose of CBCT was as low as 3.65 µSv compared with 0.16 µSv for standard radiography. CONCLUSION: Gantry-free CBCT allows for excellent diagnostic accuracy in the assessment of distal radius and scaphoid fracture morphology. Even in patients with limited mobility, very low radiation dose is sufficient to maintain high image quality.

Development and preclinical evaluation of a cable-clamp fixation device for a disrupted pubic symphysis.

BACKGROUND: Traumatic separation of the pubic symphysis can destabilize the pelvis and require surgical fixation to reduce symphyseal gapping. The traditional approach involves open reduction and the implantation of a steel symphyseal plate (SP) on the pubic bone to hold the reposition. Despite its widespread use, SP-fixation is often associated with implant failure caused by screw loosening or breakage. METHODS: To address the need for a more reliable surgical intervention, we developed and tested two titanium cable-clamp implants. The cable served as tensioning device while the clamp secured the cable to the bone. The first implant design included a steel cable anterior to the pubic symphysis to simplify its placement outside the pelvis, and the second design included a cable encircling the pubic symphysis to stabilize the anterior pelvic ring. Using highly reproducible synthetic bone models and a limited number of cadaver specimens, we performed a comprehensive biomechanical study of implant stability and evaluated surgical feasibility. RESULTS: We were able to demonstrate that the cable-clamp implants provide stability equivalent to that of a traditional SP-fixation but without the same risks of implant failure. We also provide detailed ex vivo evaluations of the safety and feasibility of a trans-obturator surgical approach required for those kind of fixation. CONCLUSION: We propose that the developed cable-clamp fixation devices may be of clinical value in treating pubic symphysis separation.

Life-threatening pelvic injuries are often associated with disruption of a joint within the hip bones, called the pubic symphysis. Disruption can lead to a gap and subsequent instability of the pelvis. The current treatment is to stabilize the joint with a steel plate and screws, however this often becomes unstable soon after the operation. In this study, we analyzed two alternatives for stabilization that use cables and clamps instead of the plate. Further, we tested a surgical approach for implantation. The cables and clamps were as stable as a steel plate so offer an alternative approach to stabilize the pubic symphysis.

Simultaneous treatment of trauma patients in a dual room trauma suite with integrated movable sliding gantry CT system: an observational study.

The trauma center of the University Hospital Wuerzburg has developed an advanced trauma pathway based on a dual-room trauma suite with an integrated movable sliding gantry CT-system. This enables simultaneous CT-diagnostics and treatment of two trauma patients. The focus of this study was to investigate the quality of the concept based on defined outcome criteria in this specific setting (time from arrival to initiation of CT scan: tCT; time from arrival to initiation of emergency surgery: tES). We analyzed all trauma patients admitted to the hospital's trauma suite from 1st May 2019 through 29th April 2020. Two subgroups were defined: trauma patients, who were treated without a second trauma patient present (group 1) and patients, who were treated simultaneously with another trauma patient (group 2). Simultaneous treatment was defined as parallel arrival within a period of 20 min. Of 423 included trauma patients, 46 patients (10.9%) were treated simultaneously. Car accidents were the predominant trauma mechanism in this group (19.6% vs. 47.8%, p < 0.05). Prehospital life-saving procedures were performed with comparable frequency in both groups (intubation 43.5% vs. 39%, p = 0.572); pleural drainage 3.2% vs. 2.2%, p = 0.708; cardiopulmonary resuscitation 5% vs. 2.2%, p = 0.387). At hospital admission, patients in group 2 suffered significantly more pain (E-problem according to Advanced Trauma Life Support principles©; 29.2% vs. 45.7%, p < 0.05). There were no significant differences in the clinical treatment (emergency procedures, vasopressor and coagulant therapy, and transfusion of red blood cells). tCT was 6 (4-10) minutes (median and IQR) in group 1 and 8 (5-15.5) minutes in group 2 (p = 0.280). tES was 90 (78-106) minutes in group 1 and 99 (97-108) minutes in group 2 (p = 0.081). The simultaneous treatment of two trauma patients in a dual-room trauma suite with an integrated movable sliding gantry CT-system requires a medical, organizational, and technical concept adapted to this special setting. Despite the oftentimes serious and life-threatening injuries, optimal diagnostic and therapeutic procedures can be guaranteed for two simultaneous trauma patients at an individual medical level in consistent quality.

Plate osteosynthesis combined with bone cement provides the highest stability for tibial head depression fractures under high loading conditions.

Older patients sustaining tibial head depression fractures often cannot follow the post-operative rehabilitation protocols with partial weight-bearing of the affected limb, leading to osteosynthesis failure, cartilage step-off and arthritis development. Therefore, the aim of this study was to analyse the biomechanical performance of different types of osteosyntheses alone and in combination with bone cement simulating cyclically high loading conditions of tibial head depression fractures. Lateral tibial head depression fractures (AO: 41-B2.2; Schatzker type III) were created in synthetic bones and stabilized using three different osteosyntheses alone and in combination with a commonly used bone cement (chronOS™): 2 screws, 4 screws in the jail technique and a lateral angle-stable buttress plate. After fixation, the lateral tibial plateau was axially loaded in two, from each other independent testing series: In the first test protocol, 5000 cycles with 500 N and in the end load-to-failure tests were performed. In the second test protocol, the cyclic loading was increased to 1000 N. Parameters of interest were the displacement of the articular fracture fragment, the stiffness and the maximum load. The osteosyntheses revealed a higher stiffness in combination with bone cement compared to the same type of osteosynthesis alone (e.g., 500 N level: 2 screws 383 ± 43 N/mm vs. 2 screws + chronOs 520 ± 108 N/mm, increase by 36%, p < 0.01; 4 screws 368 ± 97 N/mm vs. 4 screws + chronOS 516 ± 109 N/mm, increase by 40%, p < 0.01; plate: 509 ± 73 N/mm vs. plate + chronOs 792 ± 150 N/mm, increase by 56%, p < 0.01). Bone cement reduced the displacement of the plate significantly (500 N level: plate: 8.9 ± 2.8 mm vs. plate + chronOs: 3.1 ± 1.4 mm, reduction by 65%, p < 0.01; 1000 N level: 16.9 ± 3.6 mm vs 5.6 ± 1.3 mm, reduction by 67%, p < 0.01). Thus, the highest stiffness and lowest displacement values were found when using the plate with bone cement in both loading conditions (500 N level: 2 screws + chronOs 3.7 ± 1.3 mm, 4 screws + chronOs 6.2 ± 2.4 mm; 1000 N level: 2 screws + chronOs 6.5 ± 1.2 mm, 4 screws + chronOs 5.7 ± 0.8 mm). From a biomechanical perspective, plate osteosynthesis of tibial head depression fractures should always be combined with bone cement, provides higher stability than 2-screw and 4-screw fixation and is a valid treatment option in cases where extraordinary stability is required.

Surgical Fixation of Calcaneal Beak Fractures-Biomechanical Analysis of Different Osteosynthesis Techniques.

The calcaneal beak fracture is a rare avulsion fracture of the tuber calcanei characterized by a solid bony fragment at the Achilles tendon insertion. Treatment usually requires osteosynthesis. However, lack of biomechanical understanding of the ideal fixation technique persists. A beak fracture was simulated in synthetic bones and assigned to five different groups of fixation: A) 6.5-mm partial threaded cannulated screws, B) 4.0-mm partial threaded cannulated screws, C) 5.0-mm headless cannulated compression screws, D) 2.3-mm locking plate, and E) 2.8-mm locking plate. Different traction force levels were applied through an Achilles tendon surrogate in a material-testing machine on all stabilized synthetic bones. Outcome measures were peak-to-peak displacement, total displacement, plastic deformation, stiffness, visual-fracture-line displacement, and mode of implant failure. The 2.3- and 2.8-mm plating groups showed a high drop-out rate at 100 N tension force and failed under higher tension levels of 200 N. The fracture fixation using 4.0-mm partial threaded screws showed a significantly higher repair strength and was able to withhold cyclic loading up to 300 N. The lowest peak-to-peak displacement and the highest load-to-failure and stiffness were provided by fracture fixation using 6.5-mm partial threaded cannulated screws or 5.0-mm headless cannulated compression screws. As anticipated, large 6.5-mm screw diameters provide the best biomechanical fixation. Surprisingly, the 5.0-mm headless cannulated compression screws yield reliable stability despite the absent screw head and washer. When such large screws cannot be applied, 4.0-mm screws also allow reasonable fixation strength. Plate fixation should be implemented with precaution and in combination with a restrictive postoperative motion protocol. Finally, clinical cases about the surgical application and recovery are included.

Interobserver reliability of scapula fracture classifications in intra- and extra-articular injury patterns.

BACKGROUND: Morphology and glenoid involvement determine the necessity of surgical management in scapula fractures. While being present in only a small share of patients with shoulder trauma, numerous classification systems have been in use over the years for categorization of scapula fractures. The purpose of this study was to evaluate the established AO/OTA classification in comparison to the classification system of Euler and Rüedi (ER) with regard to interobserver reliability and confidence in clinical practice. METHODS: Based on CT imaging, 149 patients with scapula fractures were retrospectively categorized by two trauma surgeons and two radiologists using the classification systems of ER and AO/OTA. To measure the interrater reliability, Fleiss kappa (κ) was calculated independently for both fracture classifications. Rater confidence was stated subjectively on a five-point scale and compared with Wilcoxon signed rank tests. Additionally, we computed the intraclass correlation coefficient (ICC) based on absolute agreement in a two-way random effects model to assess the diagnostic confidence agreement between observers. RESULTS: In scapula fractures involving the glenoid fossa, interrater reliability was substantial (κ = 0.722; 95% confidence interval [CI] 0.676-0.769) for the AO/OTA classification in contrast to moderate agreement (κ = 0.579; 95% CI 0.525-0.634) for the ER classification system. Diagnostic confidence for intra-articular fracture patterns was superior using the AO/OTA classification compared to ER (p < 0.001) with higher confidence agreement (ICC: 0.882 versus 0.831). For extra-articular fractures, ER (κ = 0.817; 95% CI 0.771-0.863) provided better interrater reliability compared to AO/OTA (κ = 0.734; 95% CI 0.692-0.776) with higher diagnostic confidence (p < 0.001) and superior agreement between confidence ratings (ICC: 0.881 versus 0.912). CONCLUSIONS: The AO/OTA classification is most suitable to categorize intra-articular scapula fractures with glenoid involvement, whereas the classification system of Euler and Rüedi appears to be superior in extra-articular injury patterns with fractures involving only the scapula body, spine, acromion and coracoid process.

Comparing porous tantalum fusion implants and iliac crest bone grafts for spondylodesis of thoracolumbar burst fractures: Prospectice Cohort study.

The aim of this study was to compare two different techniques of performing one-level spondylodesis for thoracolumbar burst fractures using either an autologous iliac crest bone graft (ICBG) or a porous tantalum fusion implant (PTFI). In a prospective nonrandomized study, 44 patients (20 women, 24 men; average age 43.1 ± 13.2 years) suffering from severe thoracolumbar burst fractures were treated with combined anterior-posterior stabilization. An ICBG was used in 21 cases, and a PTFI was used in the other 23 cases. A two-year clinical and radiographic follow-up was carried out. There were no statistically significant differences in age, sex, localization/classification of the fracture, or visual analog scale (VAS) before injury between the two groups. All 44 patients were followed up for an average period of 533 days (range 173-1567). The sagittal spinal profile was restored by an average of 11.1° (ICBG) vs. 14.3° (PTFI) (monosegmental Cobb angle). Loss of correction until the last follow-up tended to be higher in the patients treated with ICBG than in those treated with PTFI (mean: 2.8° vs. 1.6°). Furthermore, significantly better restoration of the sagittal profile was obtained with the PTFI than with the iliac bone graft at the long-term follow-up (mean: ICBG 7.8°, PTFI 12.3°; p < 0.005). Short-segment posterior instrumentation combined with anterior one-level spondylodesis using either an ICBG or a PTFI resulted in sufficient correction of posttraumatic segmental kyphosis. PTFI might be a good alternative for autologous bone grafting and prevent donor site morbidities.

Trans-obturator cable fixation of open book pelvic injuries.

Operative treatment of ruptured pubic symphysis by plating is often accompanied by complications. Trans-obturator cable fixation might be a more reliable technique; however, have not yet been tested for stabilization of ruptured pubic symphysis. This study compares symphyseal trans-obturator cable fixation versus plating through biomechanical testing and evaluates safety in a cadaver experiment. APC type II injuries were generated in synthetic pelvic models and subsequently separated into three different groups. The anterior pelvic ring was fixed using a four-hole steel plate in Group A, a stainless steel cable in Group B, and a titan band in Group C. Biomechanical testing was conducted by a single-leg-stance model using a material testing machine under physiological load levels. A cadaver study was carried out to analyze the trans-obturator surgical approach. Peak-to-peak displacement, total displacement, plastic deformation and stiffness revealed a tendency for higher stability for trans-obturator cable/band fixation but no statistical difference to plating was detected. The cadaver study revealed a safe zone for cable passage with sufficient distance to the obturator canal. Trans-obturator cable fixation has the potential to become an alternative for symphyseal fixation with less complications.

[Smartphone-based photographic wound documentation improves the quality of medical accounting in orthopedic and plastic surgery]. / Qualitätssteigerung der Abrechnungsprüfung durch Smartphone-basierte Fotodokumentation in der Unfall­, Hand- und plastischen Chirurgie.

BACKGROUND: Photographic documentation of wounds, decubitus ulcers, tumors, open fractures and infections is an important part of digital patient files. It is unclear whether the photographic documentation has an effect on medical accounting with health insurance companies. OBJECTIVE: It was hypothesized that Smartphone-based systematic photographic documentation can improve the confirmation of proceeds-relevant diagnoses and procedures as well as the duration. MATERIAL AND METHODS: Staff in the emergency room, operating theater, outpatient clinic and on the wards were equipped with digital devices (Smartphone, tablet) including a photo-app. Medical accounting with the health insurance companies and identification of all case conferences in which the photographic documentation had effected a change in proceeds were analyzed for 2019 in a retrospective manner. RESULTS: Overall, 372 cases were discussed of which 27 cases were affected by the digital photographic documentation. Photographic documentation was used for clarification of the operative procedure (n = 5), primary diagnosis (n = 10), secondary diagnosis (n = 3), and length of hospitalization (n = 9). An average of 2119 € was negotiated and added per case affected by photographic documentation. Hereby, a level 1 trauma center gained an estimated 65,328 € in revenue. DISCUSSION: The use of Smartphone based photographic documentation can improve the overall quality of patient files and thus avoid loss of revenue. The implementation of digital devices with corresponding software is an important component of the digital structural change in hospitals.

[Do COVID-19 restrictions lead to a decrease in severely injured patients at a level 1 trauma center in Germany?] / Führt eine COVID-19-bedingte Ausgangsbeschränkung zu einer Reduktion schwer verletzter Patienten an einem überregionalen Traumazentrum?

BACKGROUND: Intensive care and ventilator capacities are essential for treatment of COVID-19 patients. Severely injured patients are often in continuous need of intensive care and ventilator treatment. The question arises, whether restrictions related to COVID-19 have led to a decrease in severely injured patients and thus to an increase in intensive care unit (ICU) capacity. MATERIAL AND METHODS: A retrospective analysis of all seriously injured patients with an injury severity score (ISS) ≥16 was performed between 17 March and 30 April 2020 at a level 1 trauma center in Germany. The mechanism of injury and the ISS were recorded. Further data were collected as to whether it was a work-related accident, a documented suicide attempt and if surgery was necessary in the first 24 h after arrival in hospital. Data from 2018 and 2019 served as a control group. RESULTS: There was no substantial difference in the total number of seriously injured patients (2018 n = 30, 2019 n = 23, 2020 n = 27). Furthermore, there was no relevant difference in the number of patients needing intensive care or ventilator treatment when leaving the shock room. The number of patients needing an operative intervention within the first 24 h after arriving at hospital was slightly higher in 2020. The mean ISS was at a constant level during all 3 years. In 2020 there was no polytraumatized motorbike rider, who did not have a work-related accident (2018 n = 5, 2019 n = 4, 2020 n = 0). A noticeable increase in work-related accidents was observed (2018: 10%, 2019: 26.1%, 2020 44.4%). DISCUSSION: Restrictions related to COVID-19 did not lead to a reduction in seriously injured patients needing ICU care. Due to the monocentric data analysis there is room for misinterpretation. In general, intensive care and operating capacities should be managed with adequate consideration for seriously injured patients even in times of crisis, such as the COVID-19 pandemic. Confirmation through the German Trauma Register is pending.

Cement-augmented screw fixation for calcaneal fracture treatment: a biomechanical study comparing two injectable bone substitutes.

BACKGROUND: The role of cement-augmented screw fixation for calcaneal fracture treatment remains unclear. Therefore, this study was performed to biomechanically analyze screw osteosynthesis by reinforcement with either a calcium phosphate (CP)-based or polymethylmethacrylate (PMMA)-based injectable bone cement. METHODS: A calcaneal fracture (Sanders type IIA) including a central cancellous bone defect was generated in 27 synthetic bones, and the specimens were assigned to 3 groups. The first group was fixed with four screws (3.5 mm and 6.5 mm), the second group with screws and CP-based cement (Graftys® QuickSet; Graftys, Aix-en-Provence, France), and the third group with screws and PMMA-based cement (Traumacem™ V+; DePuy Synthes, Warsaw, IN, USA). Biomechanical testing was conducted to analyze peak-to-peak displacement, total displacement, and stiffness in following a standardized protocol. RESULTS: The peak-to-peak displacement under a 200-N load was not significantly different among the groups; however, peak-to-peak displacement under a 600- and 1000-N load as well as total displacement exhibited better stability in PMMA-augmented screw osteosynthesis compared to screw fixation without augmentation. The stiffness of the construct was increased by both CP- and PMMA-based cements. CONCLUSION: Addition of an injectable bone cement to screw osteosynthesis is able to increase fixation strength in a biomechanical calcaneal fracture model with synthetic bones. In such cases, PMMA-based cements are more effective than CP-based cements because of their inherently higher compressive strength. However, whether this high strength is required in the clinical setting for early weight-bearing remains controversial, and the non-degradable properties of PMMA might cause difficulties during subsequent interventions in younger patients.

[Outcome after plate stabilization of symphyseal diastasis]. / Ergebnisse nach Plattenstabilisierung der Symphysensprengung.

BACKGROUND: Separation of the pubic symphysis with corresponding diastasis can be stabilized by symphyseal plating. OBJECTIVE: Which pelvic injuries are stabilized with symphyseal plating and what is their outcome? MATERIAL AND METHODS: A retrospective evaluation of 64 patients who underwent symphyseal plating over a period of 24 months was conducted. RESULTS: Of the patients 56 were male and 8 female with a mean age of 44 years (SD ± 17 years). The main cause of the pelvic injuries were traffic accidents. The distribution according to the AO fracture classification was 14â€¯× B1, 10â€¯× B2, 5â€¯× B3, 23â€¯× C1, 9â€¯× C2 and 3â€¯× C3 injuries. The distribution according to the Young and Burgess classification showed 9â€¯× APC I, 18â€¯× APC II, 13â€¯× APC III, 9â€¯× LC I, 3â€¯× LC II, 2â€¯× LC III and 10â€¯× VS injuries. The mean Injury Severity Score (ISS) was 32 (SD ± 17) and the mean inpatient stay was 29 days (SD ± 16 days; positive correlation p ≤ 0.001). Radiological implant loosening occurred in 52 patients. 14 patients required treatment for severe complications. The leading reason for revision surgery was implant failure (n = 8). CONCLUSION: These observations suggest that radiological signs of implant loosening are commonly observed but rarely the reason for revision surgery. Complete implant failures, however; occur mainly within the first postoperative weeks and require early revision. A timely clarification by additional X-ray imaging should be carried out if this is suspected.

Anatomically shaped locking plates for radial head and olecranon fracture fixation in Monteggia-like lesions.

BACKGROUND: Monteggia-like lesions are rare injuries. We retrospectively reviewed 40 consecutive patients with Monteggia-like lesions treated at a level I trauma center from 2009 to 2016. Clinical results were evaluated with a focus on the use of modern locking plates. OBJECTIVE AND METHODS: Twenty-eight patients had Bado type II fractures, 11 had Bado type I, and 1 had Bado type III. All patients were treated by plate fixation of the ulna with a locking compression plate or double mini-plates. Fixation or replacement was performed for radial head fractures. We characterized all fractures and recorded the range of motion (ROM); 100-point visual analog scale (VAS) scores for pain and function; Disabilities of the Arm, Shoulder and Hand (DASH) score; and Mayo Elbow Performance Score (MEPS). A follow-up rate of 78% was reached at an average of 36 months (range, 12-95 months). RESULTS: Stable fixation without recurrent instability was accomplished. The average ROM for flexion reached 130∘ with an extension deficit of 13∘. The sum of supination and pronation was 136∘. The VAS scores for pain and function were 20 and 75, respectively. The average MEPS and DASH scores were 84 and 28, respectively. Bado type I fractures had better outcomes for all variables, especially forearm rotation (p< 0.05). The complication rate was 22.5% and revision rate was 17.5%. CONCLUSION: This fracture repair technique can safely achieve good and excellent outcomes in most cases and is partly superior to previously published techniques. However, Bado type II fractures still have a risk of poor results.

The Anterior Subcutaneous Pelvic Ring Fixator: No Biomechanical Advantages Compared with External Fixation.

BACKGROUND: Subcutaneous fixation of the anterior pelvic ring is an emerging surgical technique for trauma patients. The aim of this study was to biomechanically evaluate 2 internal fixation devices for stabilizing a disrupted pelvic ring and compare them with traditional external fixation. METHODS: Thirty-six synthetic pelvises with a simulated unstable ring fracture (anteroposterior compression type III) were divided into 3 groups. Group A underwent fixation with a supra-acetabular external fixator; group B, with an internal fixator using the USS II polyaxial system; and group C, with an internal fixator using the Click'X polyaxial system. Biomechanical testing included measurement of peak-to-peak displacement at 300, 400, and 500 N; total displacement; plastic deformation; stiffness; and fracture-line displacement. RESULTS: Statistical analysis of all measured parameters revealed no significant differences among the groups. However, vertical displacement of the preshaped connecting rod within the screw heads occurred as a result of inadequate stability of the internal fixation at the rod-screw interface. CONCLUSIONS: Although internal fixator devices are placed close to the bone and should therefore maintain greater stiffness, our data did not support the hypothesis of superior stability. Special attention is required when using a curved connecting rod as the rod is easily displaced, placing relevant anatomical structures at risk. These devices require further refinement to avoid potential patient injury.