RÉSUMÉ
Auger recombination is a pivotal process for semiconductor nanocrystals (NCs), significantly affecting charge carrier generation and collection in optoelectronic devices. This process depends mainly on the NCs' electronic structures. In our study, we investigated Auger recombination dynamics in manganese (Mn2+)-doped CsPbI3 NCs using transient absorption (TA) spectroscopy combined with theoretical and experimental structural characterization. Our results show that Mn2+ doping accelerates Auger recombination, reducing the biexciton lifetime from 146 to 74 ps with increasing Mn doping concentration up to 10%. This accelerated Auger recombination in Mn-doped NCs is attributed to increased band edge wave function overlap of excitons and a larger density of final states of Auger recombination due to Mn orbital involvement. Moreover, Mn doping reduces the dielectric screening of the excitons, which also contributes to the accelerated Auger recombination. Our study demonstrates the potential of element doping to regulate Auger recombination rates by modifying the materials' electronic structure.
RÉSUMÉ
Janus nanotubes originating from rolling up asymmetric dichalcogenide monolayers have shown unique properties compared to their 2D and 3D counterparts. Most of the work on Janus nanotubes is focused on single-wall (SW) tubes. In this work, we have investigated the structural and electronic properties of double wall (DW) MoSTe nanotubes using Density Functional Theory (DFT). The most stable DW, corresponding to a minimum of the strain energy, is formed by combining 16- and 24-unit cells for the inner and outer tubes. This DW configuration shows a slightly smaller inner diameter than the SW tube, which was formed by 18-unit cells due to the intra-wall interaction. The investigation of the band gaps of 2D structures under strain and SW/DW nanotubes revealed that the curvature of the nanotube and the strain induced when forming the tube are the two primary factors enabling the band gap tuning. Moreover, we found that the band gaps of the DW MoSTe tubes close, compared to the SWs, generating tubes with a metallic-like behavior. This property makes DW MoSTe nanotubes promising for electrochemical applications.
RÉSUMÉ
Hot carrier (HC) cooling accounts for the significant energy loss in lead halide perovskite (LHP) solar cells. Here, we study HC relaxation dynamics in Mn-doped LHP CsPbI3 nanocrystals (NCs), combining transient absorption spectroscopy and density functional theory (DFT) calculations. We demonstrate that Mn2+ doping (1) enlarges the longitudinal optical (LO)-acoustic phonon bandgap, (2) enhances the electron-LO phonon coupling strength, and (3) adds HC relaxation pathways via Mn orbitals within the bands. The spectroscopic study shows that the HC cooling process is decelerated after doping under band-edge excitation due to the dominant phonon bandgap enlargement. When the excitation photon energy is larger than the optical bandgap and the Mn2+ transition gap, the doping accelerates the cooling rate owing to the dominant effect of enhanced carrier-phonon coupling and relaxation pathways. We demonstrate that such a phenomenon is optimal for the application of hot carrier solar cells. The enhanced electron-LO phonon coupling and accelerated cooling of high-temperature hot carriers efficiently establish a high-temperature thermal quasi-equilibrium where the excessive energy of the hot carriers is transferred to heat the cold carriers. On the other hand, the enlarged phononic band-gap prevents further cooling of such a quasi-equilibrium, which facilitates the energy conversion process. Our results manifest a straightforward methodology to optimize the HC dynamics for hot carrier solar cells by element doping.
RÉSUMÉ
The use of ferroelectric materials for light-harvesting applications is a possible solution for increasing the efficiency of solar cells and photoelectrocatalytic devices. In this work, we establish a fully autonomous computational workflow to identify light-harvesting materials for water splitting devices based on properties such as stability, size of the band gap, position of the band edges, and ferroelectricity. We have applied this workflow to investigate the Ruddlesden-Popper perovskite class and have identified four new compositions, which show a theoretical efficiency above 5%.
RÉSUMÉ
The exploration for thermoelectric thin films of complex oxides such as SrTiO3-based oxides is driven by the need for miniaturized harvesting devices for powering the Internet of Things (IoT). However, there is still not a clear consensus in the literature for the underlying influence of film thickness on thermoelectric properties. Here, we report the fabrication of epitaxial thin films of 6% Nb-doped SrTiO3 on (001) (LaAlO3)0.3(Sr2AlTaO6)0.7 (LSAT) single crystal using pulsed laser deposition (PLD) where the film thickness was varied from 2 nm to 68 nm. The thickness dependence shows a subtle increase of tetragonality of the thin film lattice and a gradual drop of the electrical conductivity, the density of charge carriers, and the thermoelectric Seebeck coefficient as the film thickness decreases. DFT-based calculations show that â¼2.8% increase in tetragonality results in an increased splitting between t2g and eg orbitals to â¼42.3 meV. However, experimentally observed tetragonality for films between 68 to 13 nm is only 0.06%. Hence, the effect of thickness on tetragonality is neglected. We have discussed the decrease of conductivity and the Seebeck coefficient based on the decrease of carriers and change in the scattering mechanism, respectively.
RÉSUMÉ
The physical origin of sub-band gap photoluminescence in Ruddlesden-Poppers two-dimensional (2D) lead halide perovskites (LHPs) is still under debate. In this paper, we studied the photoluminescence features from two different facets of 2D LHP single crystals: the in-plane facet (IF) containing the 2D inorganic layers and the facet perpendicular to the 2D layers (PF). At the IF, the free carriers (FCs) dominate due to the weak electron-phonon coupling in a symmetric lattice. At the PF, the strain accumulation along the 2D layers enhances the electron-phonon coupling and facilitates self-trapped exciton (STE) formation. The time-resolved PL studies indicate that free carriers (FCs) at the IF can move freely and display the trapping by the intrinsic defects. The STEs at the PF are not likely trapped by the defects due to the reduced mobility. However, with increasing STE density, the STE transport is promoted, enabling the trapping of STE by the intrinsic defects.
RÉSUMÉ
Transition-metal ion doping has been demonstrated to be effective for tuning the photoluminescence properties of perovskite quantum dots (QDs). However, it would inevitably introduce defects in the lattice. As the Mn concentration increases, the Mn dopant photoluminescence quantum yield (PLQY) first increases and then decreases. Herein the influence of the dopant and the defect states on the photophysics in Mn-doped CsPbCl3 QDs was studied by time-resolved spectroscopies, whereas the energy levels of the possible defect states were analyzed by density functional theory calculations. We reveal the formation of deep interstitials defects (Cli) by Mn2+ doping. The depopulation of initial QD exciton states is a competition between exciton-dopant energy transfer and defect trapping on an early time scale (<100 ps), which determines the final PLQY of the QDs. The present work establishes a robust material optimization guideline for all of the emerging applications where a high PLQY is essential.
RÉSUMÉ
The electromagnetic properties at the interface of heterostructure are sensitive to the interfacial crystal structure and external field. For example, the two-dimensional magnetic states at the interface of LaAlO3/SrTiO3 are discovered and can further be controlled by electric field. Here, we study two types of heterostructures, TiO2/PbTiO3 and SrTiO3/PbTiO3, using first-principle electronic structure calculations. We find that the ferroelectric polarization discontinuity at the interface leads to partially occupied Ti 3d states and the magnetic moments. The magnitude of the magnetic moments and the ground-state magnetic coupling are sensitive to the polarization intensity of PbTiO3. As the ferroelectric polarization of PbTiO3 increases, the two heterostructures show different magnetic ordering that strongly depends on the electron occupation of the Ti t2g orbitals. For the TiO2/PbTiO3 interface, the magnetic moments are mostly contributed by degenerated d yz/d xz orbitals of interfacial Ti atoms and the neighboring interfacial Ti atoms form ferromagnetic coupling. For SrTiO3/PbTiO3 interface, the interfacial magnetic moments are mainly contributed by occupied d xy orbital because of the increased polarization intensity, and as the electron occupation increases, there exists a transition of the magnetic coupling between neighboring Ti atoms from ferromagnetism to antiferromagnetism via the superexchange interaction. Our study suggests that manipulating the polarization intensity is one effective way to control interfacial magnetic ordering in the perovskite oxide heterostructures.
RÉSUMÉ
Boosting power density is one of the primary challenges that current lithium ion batteries face. Alloying anodes that possess suitable potential windows stand at the forefront in pursuing ultrafast and highly reversible lithium storage to achieve high power/energy lithium ion batteries. Herein, ultrafast lithium storage in Sn-based nanocomposite anodes is demonstrated, which is boosted by pseudocapacitance benefitting from a high fraction of highly interconnected interfaces of Fe/Sn/Li2 O. By tailoring the voltage window in the range of 0.005-1.2 V for the alloying/dealloying reactions, such Sn-based nanocomposite anodes achieve simultaneous ultrahigh rate capability, superlong cycling performance, and close-to-100% Coulombic efficiency. The nanocomposite anode delivers a high reversible capacity (≈420 mAh g-1 ) at 1 A g-1 for more than 1200 cycles, corresponding to only 0.016% per cycle of capacity decay. A reversible capacity of 350 mAh g-1 can be maintained at an ultrahigh current density of 80 A g-1 , with 67.3% capacity retention relative to the capacity at 1 A g-1 . This combination of pseudocapacitive lithium storage and spatially confined electrochemical reactions in Sn-based nanocomposite anode materials may pave the way for the development of high power/energy and long life lithium ion batteries.