RÉSUMÉ
OBJECTIVES: Diameter-based risk stratification for elective repair of ascending aortic aneurysm fails to prevent type A dissection in many patients. Aneurysm wall stresses may contribute to risk prediction; however, rates of wall stress change over time are poorly understood. Our objective was to examine aneurysm wall stress changes over 3-5 years and subsequent all-cause mortality. METHODS: Male veterans with <5.5 cm ascending aortic aneurysms and computed tomography at baseline and 3- to 5-year follow-up underwent three-dimensional aneurysm model construction. Peak circumferential and longitudinal wall stresses at systole were calculated using finite element analysis. Temporal trends were assessed by mixed-effects modelling. Changes in aortic wall stresses, diameter and length over time were evaluated as predictors of subsequent 3-year all-cause mortality by Cox proportional hazards modelling. RESULTS: Sixty-two male veterans were included in the study. Yearly changes in geometric and biomechanical measures were 0.12 mm/year (95% confidence interval, 0.04-0.20) for aortic diameter, 0.41 mm/year (0.12-0.71) for aortic length, 1.19 kPa/year -5.94 to 8.33) for peak circumferential stress, and 0.48 kPa/year (-3.89 to 4.84) for peak longitudinal stress. Yearly change in peak circumferential stress was significantly associated with hazard of death-hazard ratio for peak circumferential stress growth per 10 kPa/year, 1.27 (95% CI, 1.02-1.60; P = 0.037); hazard ratio for peak circumferential stress growth ≥ 32 kPa/year, 8.47 (95% CI, 2.42-30; P < 0.001). CONCLUSIONS: In this population of nonsurgical aneurysm patients, large temporal changes in peak circumferential stress, but not aortic diameter or length, was associated with all-cause mortality. Biomechanical stress and stress changes over time may be beneficial as additional risk factors for elective surgery in small aneurysms.
RÉSUMÉ
Objectives: Current diameter-based guidelines for ascending thoracic aortic aneurysms (aTAA) do not consistently predict risk of dissection/rupture. ATAA wall stresses may enhance risk stratification independent of diameter. The relation of wall stresses and diameter indexed to height and body surface area (BSA) is unknown. Our objective was to compare aTAA wall stresses with indexed diameters in relation to all-cause mortality at 3.75 years follow-up. Methods: Finite element analyses were performed in a veteran population with aortas ≥ 4.0 cm. Three-dimensional geometries were reconstructed from computed tomography with models accounting for pre-stress geometries. A fiber-embedded hyperelastic material model was applied to obtain wall stress distributions under systolic pressure. Peak wall stresses were compared across guideline thresholds for diameter/BSA and diameter/height. Hazard ratios for all-cause mortality and surgical aneurysm repair were estimated using cause-specific Cox proportional hazards models. Results: Of 253 veterans, 54 (21 %) had aneurysm repair at 3.75 years. Indexed diameter alone would have prompted repair at baseline in 17/253 (6.7 %) patients, including only 4/230 (1.7 %) with diameter < 5.5 cm. Peak wall stresses did not significantly differ across guideline thresholds for diameter/BSA (circumferential: p = 0.15; longitudinal: p = 0.18), but did differ for diameter/height (circumferential: p = 0.003; longitudinal: p = 0.048). All-cause mortality was independently associated with peak longitudinal stresses (p = 0.04). Peak longitudinal stresses were best predicted by diameter (c-statistic = 0.66), followed by diameter/height (c-statistic = 0.59), and diameter/BSA (c-statistic = 0.55). Conclusions: Diameter/height improved stratification of peak wall stresses compared to diameter/BSA. Peak longitudinal stresses predicted all-cause mortality independent of age and indexed diameter and may aid risk stratification for aTAA adverse events.
RÉSUMÉ
PURPOSE: Diameter-based guidelines for prophylactic repair of ascending aortic aneurysms have led to routine aortic evaluation in chest imaging. Despite sex differences in aneurysm outcomes, there is little understanding of sex-specific aortic growth rates. Our objective was to evaluate sex-specific temporal changes in radiologist-reported aortic size as well as sex differences in aortic reporting. METHOD: In this cohort study, we queried radiology reports of chest computed tomography or magnetic resonance imaging at an academic medical center from 1994 to 2022, excluding type A dissection. Aortic diameter was extracted using a custom text-processing algorithm. Growth rates were estimated using mixed-effects modeling with fixed terms for sex, age, and imaging modality, and patient-level random intercepts. Sex, age, and modality were evaluated as predictors of aortic reporting by logistic regression. RESULTS: This study included 89,863 scans among 46,622 patients (median [interquartile range] age, 64 [52-73]; 22,437 women [48%]). Aortic diameter was recorded in 14% (12,722/89,863 reports). Temporal trends were analyzed in 7194 scans among 1998 patients (age, 68 [60-75]; 677 women [34%]) with ≥2 scans. Aortic growth rate was significantly higher in women (0.22 mm/year [95% confidence interval 0.17-0.28] vs. 0.09 mm/year [0.06-0.13], respectively). Aortic reporting was significantly less common in women (odds ratio, 0.54; 95% CI, 0.52-0.56; p < 0.001). CONCLUSIONS: While aortic growth rates were small overall, women had over twice the growth rate of men. Aortic dimensions were much less frequently reported in women than men. Sex-specific standardized assessment of aortic measurements may be needed to address sex differences in aneurysm outcomes.
Sujet(s)
Anévrysme , Anévrysme de l'aorte thoracique , Humains , Mâle , Femelle , Adulte d'âge moyen , Sujet âgé , Études de cohortes , Caractères sexuels , Tomodensitométrie/méthodes , Imagerie par résonance magnétique , Anévrysme de l'aorte thoracique/imagerie diagnostique , Facteurs de risqueRÉSUMÉ
BACKGROUND: Management of asymptomatic abdominal aortic aneurysm (AAA) based on maximum aneurysm diameter and growth rate fails to preempt many ruptures. Assessment of aortic wall biomechanical properties may improve assessment of progression and rupture risk. This study aimed to assess the accuracy of AAA wall strain measured by cine magnetic resonance imaging (MRI) deformable image registration (MR strain) and investigate its relationship with recent AAA progression. METHODS: The MR strain accuracy was evaluated in silico against ground truth strain in 54 synthetic MRIs generated from a finite element model simulation of an AAA patient's abdomen for different aortic pulse pressures, tissue motions, signal intensity variations, and image noise. Evaluation included bias with 95% confidence interval (CI) and correlation analysis. Association of MR strain with AAA growth rate was assessed in 25 consecutive patients with >6 months of prior surveillance, for whom cine balanced steady-state free-precession imaging was acquired at the level of the AAA as well as the proximal, normal-caliber aorta. Univariate and multivariate regressions were used to associate growth rate with clinical variables, maximum AAA diameter (Dmax), and peak circumferential MR strain through the cardiac cycle. The MR strain interoperator variability was assessed using bias with 95% CI, intraclass correlation coefficient, and coefficient of variation. RESULTS: In silico experiments revealed an MR strain bias of 0.48% ± 0.42% and a slope of correlation to ground truth strain of 0.963. In vivo, AAA MR strain (1.2% ± 0.6%) was highly reproducible (bias ± 95% CI, 0.03% ± 0.31%; intraclass correlation coefficient, 97.8%; coefficient of variation, 7.14%) and was lower than in the nonaneurysmal aorta (2.4% ± 1.7%). Dmax (ß = 0.087) and MR strain (ß= -1.563) were both associated with AAA growth rate. The MR strain remained an independent factor associated with growth rate (ß= -0.904) after controlling for Dmax. CONCLUSIONS: Deformable image registration analysis can accurately measure the circumferential strain of the AAA wall from standard cine MRI and may offer patient-specific insight regarding AAA progression.
RÉSUMÉ
BACKGROUND: Abdominal aortic aneurysms (AAAs) may rupture before reaching maximum diameter (Dmax ) thresholds for repair. Aortic wall microvasculature has been associated with elastin content and rupture sites in specimens, but its relation to progression is unknown. PURPOSE: To investigate whether dynamic contrast-enhanced (DCE) MRI of AAA is associated with Dmax or growth. STUDY TYPE: Prospective. POPULATION: A total of 27 male patients with infrarenal AAA (mean age ± standard deviation = 75 ± 5 years) under surveillance with DCE MRI and 2 years of prior follow-up intervals with computed tomography (CT) or MRI. FIELD STRENGTH/SEQUENCE: A 3-T, dynamic three-dimensional (3D) fast gradient-echo stack-of-stars volumetric interpolated breath-hold examination (Star-VIBE). ASSESSMENT: Wall voxels were manually segmented in two consecutive slices at the level of Dmax . We measured slope to 1-minute and area under the curve (AUC) to 1 minute and 4 minutes of the signal intensity change postcontrast relative to that precontrast arrival, and, Ktrans , a measure of microvascular permeability, using the Patlak model. These were averaged over all wall voxels for association to Dmax and growth rate, and, over left/right and anterior/posterior quadrants for testing circumferential homogeneity. Dmax was measured orthogonal to the aortic centerline and growth rate was calculated by linear fit of Dmax measurements. STATISTICAL TESTS: Pearson correlation and linear mixed effects models. A P value <0.05 was considered statistically significant. RESULTS: In 44 DCE MRIs, mean Dmax was 45 ± 7 mm and growth rate in 1.5 ± 0.4 years of prior follow-up was 1.7 ± 1.2 mm per year. DCE measurements correlated with each other (Pearson r = 0.39-0.99) and significantly differed between anterior/posterior versus left/right quadrants. DCE measurements were not significantly associated with Dmax (P = 0.084, 0.289, 0.054 and 0.255 for slope, AUC at 1 minute and 4 minutes, and Ktrans , respectively). Slope and 4 minutes AUC significantly associated with growth rate after controlling for Dmax . CONCLUSION: Contrast uptake may be increased in lateral aspects of the AAA. Contrast enhancement 1-minute slope and 4-minutes AUC may be associated with a period of recent AAA growth that is independent of Dmax . EVIDENCE LEVEL: 3. TECHNICAL EFFICACY: Stage 2.
Sujet(s)
Anévrysme de l'aorte abdominale , Humains , Mâle , Études prospectives , Anévrysme de l'aorte abdominale/imagerie diagnostique , Anévrysme de l'aorte abdominale/complications , Aorte , Évolution de la maladie , Imagerie par résonance magnétique/méthodesRÉSUMÉ
Background Abdominal aortic aneurysm (AAA) screening programs have been active in the United States since 2005, but are not the only way AAAs are detected. AAA management and outcomes have not been investigated broadly in the context of "implicit AAA screening," whereby radiologic examinations not intended for focused screening can identify AAAs. Methods and Results We examined the association between imaging-based AAA screening, both explicit and implicit, and various outcomes for ≈1.6 million veterans in the Veterans Affairs health care system from 2005 to 2015. Screened-positive, screened-negative, and unscreened veterans were identified in the overall cohort and within a subgroup of veterans aged 65 years in 2005. The yearly composite screening rate increased over 10 years, from 11.7% to 18.3%, whereas the screened-positive rate decreased from 7.3% to 4.9%. Only 12.9% of screening examinations were explicit AAA screening ultrasounds. The subgroup's composite screening rate was 74% within its 10-year eligibility window, with implicit screening accounting for 91.8% of examinations. In the 2005 subgroup, all-cause mortality and Charlson comorbidity scores were higher for veterans who underwent screening compared with those unscreened (31.2% versus 23.1% and 0.47 versus 0.25, respectively; P<0.001). AAA rupture rates were similar between those unscreened and screened-negative individuals. Conclusions Accounting for both explicit and implicit screening, AAA screening in the Veterans Affairs population has moderate reach. Efforts to expand explicit AAA screening are not likely to impact either all-cause mortality or AAA rupture on the population scale as significantly as a careful accounting for and use of implicit screening data.
Sujet(s)
Anévrysme de l'aorte abdominale , Anciens combattants , Sujet âgé , Anévrysme de l'aorte abdominale/imagerie diagnostique , Anévrysme de l'aorte abdominale/épidémiologie , Prestations des soins de santé , Humains , Dépistage de masse/méthodes , Facteurs de risque , Échographie , États-Unis/épidémiologieRÉSUMÉ
Accurate and reproducible measurement of abdominal aortic aneurysm (AAA) size is an essential component of patient management, and most reliably performed at CT using a multiplanar reformat (MPR) strategy. This approach is not universal, however. This study aims to characterize the measurement error present in routine clinical assessment of AAAs and the potential clinical ramifications. Patients were included if they had AAA assessed by CT and/or MRI at two time points at least 6 months apart. Clinical maximal AAA diameter, assessed by non-standardized methods, was abstracted from the radiology report at each time point and compared to the reference aneurysm diameter measured using a MPR strategy. Discrepancies between clinical and reference diameters, and associated aneurysm enlargement rates were analyzed. Two hundred thirty patients were included, with average follow-up 3.3±2.5 years. When compared to MPR-derived diameters, clinical aneurysm measurement inaccuracy was, on average, 3.3 mm. Broad limits of agreement were found for both clinical diameters [-6.7 to +6.5 mm] and aneurysm enlargement rates [-4.6 to +4.2 mm/year] when compared to MPR-based measures. Of 78 AAAs measuring 5-6 cm by the MPR method, 21 (26.9%) were misclassified by the clinical measurement with respect to a common repair threshold (5.5 cm), of which 5 were misclassified as below, and 16 were misclassified as above the threshold. The clinical use of non-standardized AAA measurement strategies can lead to incorrect classification of AAAs as larger or smaller than the commonly accepted repair threshold of 5.5 cm and can induce large errors in quantification of aneurysm enlargement rate.
RÉSUMÉ
Background Intraluminal thrombus (ILT) within abdominal aortic aneurysms (AAAs) may be a potential marker for subsequent aneurysm growth. Purpose To investigate the role of ILT in AAA progression as assessed with CT and MRI. Materials and Methods This was a retrospective study, with patient data included from January 2004 to December 2018 at a Veteran Affairs medical center. Male patients with AAA who underwent contrast material-enhanced CT at baseline and CT or black-blood MRI at follow-up (minimal follow-up duration of 6 months) were included. The maximal AAA diameter was measured with multiplanar reconstruction, and the annual growth rate of aneurysms was calculated. Uni- and multivariable linear regression analyses were used to determine the relationship between demographic and imaging factors and aneurysm growth. Results A total of 225 patients (mean age, 72 years ± 9 [standard deviation]) were followed for a mean of 3.3 years ± 2.5. A total of 207 patients were followed up with CT, and 18 were followed up with MRI. At baseline, the median size of the AAA was 3.8 cm (interquartile range [IQR], 3.3-4.3 cm); 127 of 225 patients (54.7%) had ILT. When compared with AAAs without ILT, AAAs with ILT had larger baseline diameters (median, 4.1 cm [IQR, 3.6-4.8 cm] vs 3.4 cm [IQR, 3.2-3.9 cm]; P < .001) and faster growth rates (median, 2.0 mm/y [IQR, 1.3-3.2 mm/y] vs 1.0 mm/y [IQR, 0.4-1.8 mm/y]; P < .001). Small AAAs (size range, 3-4 cm) with ILT grew 1.9-fold faster than did those without ILT (median, 1.5 mm/y [IQR, 0.9-2.7 mm/y] vs 0.8 mm/y [IQR, 0.3-1.5 mm/y]; P < .001). Medium AAAs (size range, 4-5 cm) with ILT had 1.2-fold faster growth than did those without ILT (median growth, 2.1 mm/y [IQR, 1.4, 3.7 mm/y] vs 1.8 mm/y [IQR, 0.9, 2.0 mm/y]; P = .06). In multivariable analysis, baseline diameter and ILT were independently positively related to aneurysm growth rate (standardized regression coefficient, 0.43 [P < .001] and 0.15 [P = .02], respectively). Conclusion Both maximal cross-sectional aneurysm diameter and the presence of intraluminal thrombus are independent predictors of abdominal aortic aneurysm growth. © RSNA, 2020 Online supplemental material is available for this article.
Sujet(s)
Anévrysme de l'aorte abdominale , Thrombose , Sujet âgé , Sujet âgé de 80 ans ou plus , Anévrysme de l'aorte abdominale/complications , Anévrysme de l'aorte abdominale/imagerie diagnostique , Anévrysme de l'aorte abdominale/anatomopathologie , Évolution de la maladie , Humains , Mâle , Adulte d'âge moyen , Études rétrospectives , Facteurs de risque , Thrombose/complications , Thrombose/imagerie diagnostique , Thrombose/anatomopathologie , TomodensitométrieRÉSUMÉ
Intraluminal thrombus (ILT) is present in the majority of abdominal aortic aneurysms (AAA) of a size warranting consideration for surgical or endovascular intervention. The rupture risk of AAAs is thought to be related to the balance of vessel wall strength and the mechanical stress caused by systemic blood pressure. Previous finite element analyses of AAAs have shown that ILT can reduce and homogenize aneurysm wall stress. These works have largely considered ILT to be homogeneous in mechanical character or have idealized a stiffness distribution through the thrombus thickness. In this work, we use magnetic resonance imaging (MRI) to delineate the heterogeneous composition of ILT in 7 AAAs and perform patient-specific finite element analysis under multiple conditions of ILT layer stiffness disparity. We find that explicit incorporation of ILT heterogeneity in the finite element analysis is unlikely to substantially alter major stress analysis predictions regarding aneurysm rupture risk in comparison to models assuming a homogenous thrombus, provided that the maximal ILT stiffness is the same between models. Our results also show that under a homogeneous ILT assumption, the choice of ILT stiffness from values common in the literature can result in significantly larger variations in stress predictions compared to the effects of thrombus heterogeneity.
RÉSUMÉ
BACKGROUND: Intraluminal thrombus (ILT) signal intensity on MRI has been studied as a potential marker of abdominal aortic aneurysm (AAA) progression. PURPOSE: 1) To characterize the relationship between ILT signal intensity and AAA diameter; 2) to evaluate ILT change over time; and 3) to assess the relationship between ILT features and AAA growth. STUDY TYPE: Prospective. SUBJECTS: Eighty AAA patients were imaged, and a subset (n = 41) were followed with repeated MRI for 16 ± 9 months. FIELD STRENGTH/SEQUENCE: 3D black-blood fast-spin-echo sequence at 3 T. ASSESSMENT: ILT was designated as "bright" if the signal was greater than 1.2 times that of adjacent psoas muscle. AAAs were divided into three groups based on ILT: Type 1: bright ILT; Type 2: isointense ILT; Type 3: no ILT. During follow-up, an active ILT change was defined as new ILT formation or an increase in ILT signal intensity to bright; stable ILT was defined as no change in ILT type or ILT became isointense from bright previously. STATISTICAL TESTS: Shapiro-Wilk test; Mann-Whitney U-test; Fisher's exact test; Kruskal-Wallis test; Spearman's r; intraclass correlation coefficient (ICC), Cohen's kappa. RESULTS: AAAs with Type 1 ILT were larger than those with Types 2 and 3 ILT (5.1 ± 1.1 cm, 4.4 ± 0.9 cm, 4.2 ± 0.8 cm, P = 0.008). The growth rate of AAAs with Type 1 ILT was significantly greater than that of AAAs with Types 2 and 3 ILT (2.6 ± 2.5, 0.6 ± 1.3, 1.5 ± 0.6 mm/year, P = 0.01). During follow-up, AAAs with active ILT changes had a 3-fold increased growth rate compared with AAAs with stable ILT (3.6 ± 3.0 mm/year vs. 1.2 ± 1.5 mm/year, P = 0.008). DATA CONCLUSION: AAAs with bright ILT are larger in diameter and grow faster. Active ILT change is associated with faster AAA growth. Black-blood MRI can characterize ILT features and monitor their change over time, which may provide new insights into AAA risk assessment. LEVEL OF EVIDENCE: 2 Technical Efficacy Stage: 5 J. Magn. Reson. Imaging 2019;50:994-1001.
Sujet(s)
Anévrysme de l'aorte abdominale/complications , Anévrysme de l'aorte abdominale/imagerie diagnostique , Imagerie par résonance magnétique/méthodes , Thrombose/complications , Thrombose/imagerie diagnostique , Sujet âgé , Aorte abdominale/imagerie diagnostique , Aorte abdominale/anatomopathologie , Anévrysme de l'aorte abdominale/anatomopathologie , Études transversales , Évolution de la maladie , Femelle , Études de suivi , Humains , Mâle , Études prospectivesRÉSUMÉ
OBJECTIVES: Management of abdominal aortic aneurysms (AAAs) is based on diameter. CT angiography (CTA) is commonly used, but requires radiation and iodinated contrast. Non-contrast MRI is an appealing alternative that may allow better characterization of intraluminal thrombus (ILT). This study aims to 1) validate non-contrast MRI for measuring AAA diameter, and 2) to assess ILT with CTA and MRI. METHOD: 28 patients with AAAs (diameter 50.7 ± 12.3 mm) underwent CTA and non-contrast MRI. MRI was acquired at 3 T using 1) a conventional 3D gradient echo (GRE) sequence and 2) a 3D T1-weighted black blood fast-spin-echo sequence. Two radiologists independently measured the AAA diameter. The ratio of signal of ILT and adjacent psoas muscle (ILTr = signalILT/signalMuscle) was quantified. RESULTS: Strong agreement between CTA and non-contrast MRI was shown for AAA diameter (intra-class coefficient > 0.99). Both approaches had excellent inter-observer reproducibility (ICC > 0.99). ILT appeared homogenous on CTA, whereas MRI revealed compositional variations. Patients with AAAs ≥5.5 cm and <5.5 cm had a variety of distributions of old/fresh ILT types. CONCLUSIONS: Non-contrast 3D black blood MRI provides accurate and reproducible AAA diameter measurements as validated by CTA. It also provides unique information about ILT composition, which may be linked with elevated risk for disease progression. KEY POINTS: ⢠Non-contrast MRI is an appealing alternative to CTA for AAA management. ⢠Non-contrast MRI can accurately measure AAA diameters compared to CTA. ⢠MRI affords unique characterization of intraluminal thrombus composition.
Sujet(s)
Anévrysme de l'aorte abdominale/imagerie diagnostique , Thrombose/imagerie diagnostique , Sujet âgé , Angiographie par tomodensitométrie , Produits de contraste , Évolution de la maladie , Femelle , Humains , Imagerie tridimensionnelle , Imagerie par résonance magnétique , Mâle , Adulte d'âge moyen , Reproductibilité des résultats , Études rétrospectivesRÉSUMÉ
Ischemic mitral regurgitation is associated with substantial risk of death. We sought to: (1) detail significant recent improvements to the Dassault Systèmes human cardiac function simulator (HCFS); (2) use the HCFS to simulate normal cardiac function as well as pathologic function in the setting of posterior left ventricular (LV) papillary muscle infarction; and (3) debut our novel device for correction of ischemic mitral regurgitation. We synthesized two recent studies of human myocardial mechanics. The first study presented the robust and integrative finite element HCFS. Its primary limitation was its poor diastolic performance with an LV ejection fraction below 20% caused by overly stiff ex vivo porcine tissue parameters. The second study derived improved diastolic myocardial material parameters using in vivo MRI data from five normal human subjects. We combined these models to simulate ischemic mitral regurgitation by computationally infarcting an LV region including the posterior papillary muscle. Contact between our novel device and the mitral valve apparatus was simulated using Dassault Systèmes SIMULIA software. Incorporating improved cardiac geometry and diastolic myocardial material properties in the HCFS resulted in a realistic LV ejection fraction of 55%. Simulating infarction of posterior papillary muscle caused regurgitant mitral valve mechanics. Implementation of our novel device corrected valve dysfunction. Improvements in the current study to the HCFS permit increasingly accurate study of myocardial mechanics. The first application of this simulator to abnormal human cardiac function suggests that our novel annuloplasty ring with a sub-valvular element will correct ischemic mitral regurgitation.
Sujet(s)
Annuloplastie mitrale/instrumentation , Insuffisance mitrale/chirurgie , Valve atrioventriculaire gauche/anatomie et histologie , Valve atrioventriculaire gauche/physiologie , Modèles anatomiques , Modèles cardiovasculaires , Animaux , Simulation numérique , Humains , Mâle , Valve atrioventriculaire gauche/chirurgie , Insuffisance mitrale/physiopathologie , Infarctus du myocarde/physiopathologie , Logiciel , Suidae , Valve atrioventriculaire droite/anatomie et histologie , Valve atrioventriculaire droite/anatomopathologie , Valve atrioventriculaire droite/chirurgie , Dysfonction ventriculaire gauche/physiopathologie , Remodelage ventriculaire/physiologieRÉSUMÉ
We present the case of a 67-year-old man with concomitant stroke and pulmonary embolism 1 day after radiofrequency catheter ablation for refractory atrial tachycardia. A chest computed tomographic angiogram revealed "thrombus-in-transit" across a patent foramen ovale, confirming the diagnosis of paradoxical embolism. Paradoxical embolism is a rare definitive diagnosis. Our case is a key demonstration of the even rarer instance where such a diagnosis is confirmed at multidetector computed tomography.
Sujet(s)
Embolie paradoxale/complications , Embolie paradoxale/imagerie diagnostique , Foramen ovale perméable/imagerie diagnostique , Tomodensitométrie multidétecteurs/méthodes , Thrombose/complications , Thrombose/imagerie diagnostique , Sujet âgé , Diagnostic différentiel , Humains , Mâle , Embolie pulmonaire/complications , Embolie pulmonaire/imagerie diagnostiqueRÉSUMÉ
Atherosclerosis at the carotid bifurcation is a major risk factor for stroke. As mechanical forces may impact lesion stability, finite element studies have been conducted on models of diseased vessels to elucidate the effects of lesion characteristics on the stresses within plaque materials. It is hoped that patient-specific biomechanical analyses may serve clinically to assess the rupture potential for any particular lesion, allowing better stratification of patients into the most appropriate treatments. Due to a sparsity of in vivo plaque rupture data, the relationship between various mechanical descriptors such as stresses or strains and rupture vulnerability is incompletely known, and the patient-specific utility of biomechanical analyses is unclear. In this article, we present a comparison between carotid atheroma rupture observed in vivo and the plaque stress distribution from fluid-structure interaction analysis based on pre-rupture medical imaging. The effects of image resolution are explored and the calculated stress fields are shown to vary by as much as 50% with sub-pixel geometric uncertainty. Within these bounds, we find a region of pronounced elevation in stress within the fibrous plaque layer of the lesion with a location and extent corresponding to that of the observed site of plaque rupture.
Sujet(s)
Athérosclérose/anatomopathologie , Artères carotides/anatomopathologie , Imagerie diagnostique/méthodes , Sujet âgé de 80 ans ou plus , Humains , Mâle , Facteurs de risque , Rupture/anatomopathologie , Accident vasculaire cérébral/anatomopathologie , Tomodensitomètre/effets indésirablesRÉSUMÉ
Patient-specific biomechanical modeling of atherosclerotic arteries has the potential to aid clinicians in characterizing lesions and determining optimal treatment plans. To attain high levels of accuracy, recent models use medical imaging data to determine plaque component boundaries in three dimensions, and fluid-structure interaction is used to capture mechanical loading of the diseased vessel. As the plaque components and vessel wall are often highly complex in shape, constructing a suitable structured computational mesh is very challenging and can require a great deal of time. Models based on unstructured computational meshes require relatively less time to construct and are capable of accurately representing plaque components in three dimensions. These models unfortunately require additional computational resources and computing time for accurate and meaningful results. A two-stage modeling strategy based on unstructured computational meshes is proposed to achieve a reasonable balance between meshing difficulty and computational resource and time demand. In this method, a coarse-grained simulation of the full arterial domain is used to guide and constrain a fine-scale simulation of a smaller region of interest within the full domain. Results for a patient-specific carotid bifurcation model demonstrate that the two-stage approach can afford a large savings in both time for mesh generation and time and resources needed for computation. The effects of solid and fluid domain truncation were explored, and were shown to minimally affect accuracy of the stress fields predicted with the two-stage approach.