RÉSUMÉ
The direct liquid-phase oxidative carbonylation of methane, utilizing abundant natural gas, offers a mild and straightforward alternative. However, most catalysts proposed for this process suffer from low acetic acid yields due to few active sites and rapid C1 oxygenate generation, impeding their industrial feasibility. Herein, we report a highly efficient 0.1Cu/Fe-HZSM-5-TF (TF denotes template-free synthesis) catalyst featuring exclusively mononuclear Fe and Cu anchored in the ZSM-5 channels. Under optimized conditions, the catalyst achieved an unprecedented acetic acid yield of 40.5â mmol gcat -1 h-1 at 50 °C, tripling the previous records of 12.0â mmol gcat -1 h-1. Comprehensive characterization, isotope-labeled experiments and density functional theory (DFT) calculations reveal that the homogeneous mononuclear Fe sites are responsible for the activation and oxidation of methane, while the neighboring Cu sites play a key role in retarding the oxidation process, promoting C-C coupling for effective acetic acid synthesis. Furthermore, the methyl-group carbon in acetic acid originates solely from methane, while its carbonyl-group carbon is derived exclusively from CO, rather than the conversion of other C1 oxygenates. The proposed bimetallic catalyst design not only overcomes the limitations of current catalysts but also generalizes the oxidative carbonylation of other alkanes, demonstrating promising advancements in sustainable chemical synthesis.
RÉSUMÉ
Implementing the synergistic effects between the metal and the ligand has successfully streamlined the energetics for CO2 activation and gained high catalytic activities, establishing the important breakthroughs in photocatalytic CO2 reduction. Herein, we describe a Ni(II) N-confused porphyrin complex (NiNCP) featuring an acidic N-H group. It is readily deprotonated and exists in an anion form during catalysis. Owing to this functional site, NiNCP gave rise to an outstanding turnover number (TON) as high as 217,000 with a 98% selectivity for CO2 reduction to CO, while the parent Ni(II) porphyrin (NiTPP) was found to be nearly inactive. Our mechanistic analysis revealed a nonclassical reaction pattern where CO2 was effectively activated via the attack of the Lewis-basic ligand. The resulting ligand-bound CO2 adduct could be further reduced to produce CO. This new metal-ligand synergistic effect is anticipated to inspire the design of highly active catalysts for small molecule activations.
RÉSUMÉ
Per- and polyfluoroalkyl substances (PFAS) pose a rapidly increasing global problem as their widespread use and high stability lead worldwide to water contamination, with significant detrimental health effects.[1] Supramolecular chemistry has been invoked to develop materials geared towards the specific capture of PFAS from water,[2] to reduce the concentration below advisory safety limits (e.g., 70â ng/L for the sum of perfluorooctane sulfonic acid, PFOS and perfluorooctanoic acid, PFOA). Scale-up and use in natural waters with high PFAS concentrations has hitherto posed a problem. Here we report a new type of host-guest interaction between deca-ammonium-functionalized pillar[5]arenes (DAF-P5s) and perfluoroalkyl acids. DAF-P5 complexes show an unprecedented 1 : 10 stoichiometry, as confirmed by isothermal calorimetry and X-ray crystallographic studies, and high binding constants (up to 106â M-1) to various polyfluoroalkyl acids. In addition, non-fluorinated acids do not hamper this process significantly. Immobilization of DAF-P5s allows a simple single-time filtration of PFAS-contaminated water to reduce the PFOS/PFOA concentration 106â times to 15-50â ng/L level. The effective and fast (<5â min) orthogonal binding to organic molecules without involvement of fluorinated supramolecular hosts, high breakthrough capacity (90â mg/g), and robust performance (>10â regeneration cycles without decrease in performance) set a new benchmark in PFAS-absorbing materials.
RÉSUMÉ
Viable alternatives to scarce and expensive noble-metal-based catalysts are transition-metal carbides such as Mo and W carbides. It has been shown that these are active and selective catalysts in the hydrodeoxygenation of renewable lipid-based feedstocks. However, the reaction mechanism and the structure-activity relationship of these transition-metal carbides have not yet been fully clarified. In this work, the reaction mechanism of butyric acid hydrodeoxygenation (HDO) over molybdenum carbide (Mo2C) has been studied comprehensively by means of density functional theory coupled with microkinetic modeling. We identified the rate-determining step to be butanol dissociation: C4H9*OH + * â C4H9* + *OH. Then we further explored the possibility to facilitate this step upon heteroatom doping and found that Zr- and Nb-doped Mo2C are the most promising catalysts with enhanced HDO catalytic activity. Linear-scaling relationships were established between the electronic and geometrical descriptors of the dopants and the catalytic performance of various doped Mo2C catalysts. It was demonstrated that descriptors such as dopants' d-band filling and atomic radius play key roles in governing the catalytic activity. This fundamental understanding delivers practical strategies for the rational design of Mo2C-based transition-metal carbide catalysts with improved HDO performance.
RÉSUMÉ
This work examined the location-steered catalytic behavior of Mo/ZSM-5 catalyst for one-step methane dehydroaromatization to benzene reaction. The results indicated that α-site is the preferred location for the formation of ethylene, the main intermediate for aromatics production via the propagation pathway, while δ-site is favorable for the hydrocarbon pool aggregation reaction pathway.
RÉSUMÉ
Reaction of sulfonimidoyl fluorides with anilines and Ca(NTf2)2 results in the formation of chiral sulfonimidamides. The reaction proceeds with inversion of the stereocenter at a sulfur atom. Enantiospecificity of the reaction was observed for all studied non-heterocyclic anilines. Combined experimental and computational mechanistic studies highlight chelate-type coordination of the sulfonimidoyl group to Ca(NTf2)2 and the formation of a SN2-like transition state, in which leaving F- coordinates with the Ca2+ ion.
RÉSUMÉ
Non-oxidative coupling of methane is a promising route to obtain ethylene directly from natural gas. We synthesized siliceous [Fe]zeolites with MFI and CHA topologies and found that they display high selectivity (>90 % for MFI and >99 % for CHA) to ethylene and ethane among gas-phase products. Deactivated [Fe]zeolites can be regenerated by burning coke in air. In situ X-ray absorption spectroscopy demonstrates that the isolated Fe3+ centers in zeolite framework of fresh catalysts are reduced during the reaction to the active sites, including Fe2+ species and Fe (oxy)carbides dispersed in zeolite pores. Photoelectron photoion coincidence spectroscopy results show that methyl radicals are the reaction intermediates formed upon methane activation. Ethane is formed by methyl radical coupling, followed by its dehydrogenation to ethylene. Based on the observation of intermediates including allene, vinylacetylene, 1,3-butadiene, 2-butyne, and cyclopentadiene over [Fe]MFI, a reaction network is proposed leading to polyaromatic species. Such reaction intermediates are not observed over the small-pore [Fe]CHA, where ethylene and ethane are the only gas-phase products.
RÉSUMÉ
The role of formate species for CO2 hydrogenation is still under debate. Although formate has been frequently observed and commonly proposed as the possible intermediate, there is no definite evidence for the reaction of formate species for methanol production. Here, formate formation and conversion over the ZnZrOx solid solution catalyst are investigated by in situ/operando diffuse reflectance infrared Fourier transform spectroscopy-mass spectroscopy (DRIFTS-MS) coupled with density functional theory (DFT) calculations. Spectroscopic results show that bidentate carbonate formed from CO2 adsorption is hydrogenated to formate on Zn-O-Zr sites (asymmetric sites), where the Zn site is responsible for H2 activation and the Zr site is beneficial for the stabilization of reaction intermediates. The asymmetric Zn-O-Zr sites with adjacent and inequivalent features on the ZnZrOx catalyst promote not only formate formation but also its transformation. Both theoretical and experimental results demonstrate that the origin of the excellent performance of the ZnZrOx catalyst for methanol formation is associated with the H2 heterolytic cleavage promoted by the asymmetric Zn and Zr sites.
RÉSUMÉ
The selective oxidation of CH4 in the aqueous phase to produce valuable chemicals has attracted considerable attention due to its mild reaction conditions and simple process. As the most widely studied catalyst for this reaction, Fe-ZSM-5 demonstrates high intrinsic activity and selectivity; however, Fe-ZSM-5 prepared using conventional methods has a limited number of active Fe sites, resulting in low CH4 conversion per unit mass of the catalyst. This study reports a facile organic-template-free synthesis strategy that enables the incorporation of more Fe into the zeolite framework with a higher dispersion degree compared to conventional synthesis methods. Because framework Fe incorporated in this way is more readily transformed into isolated extra-framework Fe species under thermal treatment, the overall effect is that Fe-ZSM-5 prepared using this method (Fe-HZ5-TF) has 3 times as many catalytically active sites as conventional Fe-ZSM-5. When used for the selective oxidation of CH4 with 0.5 M H2O2 at 75 °C, Fe-HZ5-TF produced a high C1 oxygenate yield of 109.4 mmol gcat-1 h-1 (a HCOOH selectivity of 91.1%), surpassing other catalysts reported to date. Spectroscopic characterization and density functional theory calculations revealed that the active sites in Fe-HZ5-TF are mononuclear Fe species in the form of [(H2O)3Fe(IV)âO]2+ bound to Al pairs in the zeolite framework. This differs from conventional Fe-ZSM-5, where binuclear Fe acts as the active site. Analysis of the catalyst and product evolution during the reaction suggests a radical-driven pathway to explain CH4 activation at the mononuclear Fe site and subsequent conversion to C1 oxygenates.
RÉSUMÉ
CO2 is a prominent example for an exhaust gas, and it is known for its high impact on global warming. Therefore, carbon capture from CO2 emissions of industrial processes is increasingly important to halt and prevent the disruptive consequences of global warming. Covalent organic frameworks (COFs) as porous nanomaterials have been shown to selectively adsorb CO2 in high quantities and with high CO2/N2 selectivity. Interactions with amines are recognized to selectively adsorb CO2 and help capture it from exhaust emissions. Herein, a novel COF (Me3TFB-(NH2)2BD), which was not accessible via a direct condensation reaction, was synthetized by dynamic linker exchange starting with Me3TFB-BD. Despite the linker exchange, the porosity of the COF was largely maintained, resulting in a high BET surface area of 1624 ± 89 m2/g. The CO2 and N2 adsorption isotherms at 273 and 295 K were studied to determine the performance in carbon capture at flue gas conditions. Me3TFB-(NH2)2BD adsorbs 1.12 ± 0.26 and 0.72 ± 0.07 mmol/g of CO2 at 1 bar and 273 and 295 K, respectively. The COF shows a high CO2/N2 IAST selectivity under flue gas conditions (273 K:83 ± 11, 295 K: 47 ± 11). The interaction of the aromatic amine groups with CO2 is based on physisorption, which is expected to make the regeneration of the material energy efficient.
RÉSUMÉ
Covalent organic frameworks (COFs) are porous materials with high surface areas, making them interesting for a large variety of applications including energy storage, gas separation, photocatalysis, and chemical sensing. Structural variation plays an important role in tuning COF properties. Next to the type of the building block core, bonding directionality, and linking chemistry, substitution of building blocks provides another level of synthetic control. Thorough characterization and comparison of various substitution patterns is relevant for the molecular engineering of COFs via rational design. To this end, we have systematically synthesized and characterized multiple combinations of several methylated and non-methylated building blocks to obtain a series of imine-based COFs. This includes the experimental assignment of the COF structure by solid-state NMR. By comparing the properties of all COFs, the following trends were found: (1) upon methylation of the aldehyde nodes, COFs show increased Brunauer-Emmett-Teller surface areas, reduced pore collapse, blue-shifted absorbance spectra, and â¼0.2 eV increases in their optical band gaps. (2) COFs with dimethylated amine linkers show a lower porosity. (3) In tetramethylated amine linkers, the COF porosity even further decreases, the absorbance spectra are clearly red-shifted, and smaller optical band gaps are obtained. Our study shows that methyl substitution patterns on COF building blocks are a handle to control the UV absorbance of the resulting frameworks.
RÉSUMÉ
Supported metal catalysts have shown to be efficient for CO2 conversion due to their multifunctionality and high stability. Herein, we have combined density functional theory calculations with microkinetic modeling to investigate the catalytic reaction mechanisms of CO2 hydrogenation to CH3OH over a recently reported catalyst of Cd4/TiO2. Calculations reveal that the metal-oxide interface is the active center for CO2 hydrogenation and methanol formation via the formate pathway dominates over the reverse water-gas shift (RWGS) pathway. Microkinetic modeling demonstrated that formate species on the surface of Cd4/TiO2 is the relevant intermediate for the production of CH3OH, and CH2O# formation is the rate-determining step. These findings demonstrate the crucial role of the Cd-TiO2 interface for controlling the CO2 reduction reactivity and CH3OH selectivity.
RÉSUMÉ
The choice of a solvent and the reaction conditions often defines the overall behavior of a homogeneous catalytic system by affecting the preferred reaction mechanism and thus the activity and selectivity of the catalytic process. Here, we explore the role of solvation in the mechanism of ketone reduction using a model representative of a bifunctional Mn-diamine catalyst through density functional theory calculations in a microsolvated environment by considering explicit solvent and fully solvated ab initio molecular dynamics simulations for the key elementary steps. Our computational analysis reveals the possibility of a Meerwein-Ponndorf-Verley (MPV) type mechanism in this system, which does not involve the participation of the N-H moiety and the formation of a transition-metal hydride species in ketone conversion. This path was not previously considered for Mn-based metal-ligand cooperative transfer hydrogenation homogeneous catalysis. The MPV mechanism is strongly facilitated by the solvent molecules present in the reaction environment and can potentially contribute to the catalytic performance of other related catalyst systems. Calculations indicate that, despite proceeding effectively in the second coordination sphere of the transition-metal center, the MPV reaction path retains the enantioselectivity preference induced by the presence of the small chiral N,N'-dimethyl-1,2-cyclohexanediamine ligand within the catalytic Mn(I) complex.
RÉSUMÉ
The products of the SuFEx reaction between sulfonimidoyl fluorides and phenols, sulfonimidates, are shown to display dynamic covalent chemistry with other phenols. This reaction was shown to be enantiospecific, finished in minutes at room temperature in high yields, and useful for both asymmetric synthesis and sustainable polymer production. Its wide scope further extends the usefulness of SuFEx and related click chemistries.
Sujet(s)
Polymères , Soufre , Chimie click , Structure moléculaire , PhénolsRÉSUMÉ
Photoreduction of CO2 into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu1 N3 @PCN and Cu1 P3 @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO2 reduction by H2 O without sacrificial agents. Cu1 N3 @PCN was exclusively active for CO production with a rate of 49.8â µmolCO gcat -1 h-1 , outperforming most polymeric carbon nitride (C3 N4 ) based catalysts, while Cu1 P3 @PCN preferably yielded H2 . Experimental and theoretical analysis suggested that doping P in C3 N4 by replacing a corner C atom upshifted the d-band center of Cu in Cu1 N3 @PCN close to the Fermi level, which boosted the adsorption and activation of CO2 on Cu1 N3 , making Cu1 N3 @PCN efficiently convert CO2 to CO. In contrast, Cu1 P3 @PCN with a much lower Cu 3d electron energy exhibited negligible CO2 adsorption, thereby preferring H2 formation via photocatalytic H2 O splitting.
RÉSUMÉ
The global rise of antimicrobial resistance (AMR) that increasingly invalidates conventional antibiotics has become a huge threat to human health. Although nanosized antibacterial agents have been extensively explored, they cannot sufficiently discriminate between microbes and mammals, which necessitates the exploration of other antibiotic-like candidates for clinical uses. Herein, two-dimensional boron nitride (BN) nanosheets are reported to exhibit antibiotic-like activity to AMR bacteria. Interestingly, BN nanosheets had AMR-independent antibacterial activity without triggering secondary resistance in long-term use and displayed excellent biocompatibility in mammals. They could target key surface proteins (e.g., FtsP, EnvC, TolB) in cell division, resulting in impairment of Z-ring constriction for inhibition of bacteria growth. Notably, BN nanosheets had potent antibacterial effects in a lung infection model by P. aeruginosa (AMR), displaying a 2-fold increment of survival rate. Overall, these results suggested that BN nanosheets could be a promising nano-antibiotic to combat resistant bacteria and prevent AMR evolution.
Sujet(s)
Antibactériens , Bactéries , Animaux , Humains , Antibactériens/pharmacologie , Antibactériens/usage thérapeutique , Composés du bore/pharmacologie , MammifèresRÉSUMÉ
By means of quantum Monte Carlo (QMC) calculations from first-principles, we study the ground-state properties of the narrowest zigzag graphene nanoribbon with an infinite linear acene structure. We show that this quasi-one-dimensional system is correlated and its ground state is made of localized π electrons whose spins are antiferromagnetically ordered. The antiferromagnetic (AFM) stabilization energy [36(3) meV per carbon atom] and the absolute magnetization [1.13(0.11) µB per unit cell] predicted by QMC are sizable, and they suggest the survival of antiferromagnetic correlations above room temperature. These values can be reproduced to some extent by density functional theory (DFT) within the DFT+U framework or by using hybrid functionals. Based on our QMC results, we then provide the strength of Hubbard repulsion in DFT+U suitable for this class of systems.
RÉSUMÉ
Covalent Organic Frameworks (COFs) are thermally and chemically stable, nanoporous materials with high surface areas, making them interesting for a large variety of applications including energy storage, gas separation, catalysis and chemical sensing. However, pore blocking and pore collapse may limit their performance. Reducing the capillary forces by using solvents with low surface tension, like supercritical CO2, for activation, and the introduction of bulky isopropyl/methoxy groups were found to reduce pore collapse. Herein, we present an easy-to-use alternative that involves the combination of a new, methylated building block (2,4,6-trimethylbenzene-1,3,5-tricarbaldehyde, Me3TFB) with vacuum drying. Condensation of Me3TFB with 1,4-phenylenediamine (PA) or benzidine (BD) resulted in imine-linked 2D COFs (Me3TFB-PA and Me3TFB-BD) with higher degrees of crystallinity and higher BET surface areas compared to their non-methylated counterparts (TFB-PA and TFB-BD). This was rationalized by density functional theory computations. Additionally, the methylated COFs are less prone to pore collapse when subjected to vacuum drying and their BET surface area was found to remain stable for at least four weeks. Within the context of their applicability as sensors, we also studied the influence of hydrochloric acid vapour on the optical and structural properties of all COFs. Upon acid exposure their colour and absorbance spectra changed, making them indeed suitable for acid detection. Infrared spectroscopy revealed that the colour change is likely attributed to the cleavage of imine bonds, which are only partially restored after ammonia exposure. While this limits their application as reusable sensors, our work presents a facile method to increase the robustness of commonly known COFs.
RÉSUMÉ
Extraframework cations define the chemical versatility of zeolite catalysts. Addressing their structural complexity and dynamic behavior represents one of the main fundamental challenges in the field. Herein, we present a computational approach for the identification and analysis of the accessible pool of intrazeolite extraframework complexes with a Cu/MOR catalyst as an industrially important model system. We employ ab initio molecular dynamics for capturing the ensemble of reactive isomers with the [Cu3O3]2+ stoichiometry confined in the mordenite channels. The high structural diversity of the generated isomers was ensured by concentrating the kinetic energy along the low-curvature directions of the potential energy surface (PES). Geometrically distinct [Cu3O3]2+ complexes were identified via a series of clustering procedures ensuring that one structure of each local minima is retained. The proposed procedure has resulted in a set of previously unknown peroxo-complexes, which are >50 kJ/mol more stable than the recently hypothesized chair-shaped structure. Our analysis demonstrates that the most stable peroxo-containing clusters can be formed under operando conditions from molecular oxygen and the Cu3O unit, similar to that in methane monooxygenase (MMO) enzymes.
RÉSUMÉ
Electrochemical reduction of carbon dioxide (CO2 ) into chemicals and fuels has recently attracted much interest, but normally suffers from a high overpotential and low selectivity. In this work, single P atoms were introduced into a N-doped carbon supported single Fe atom catalyst (Fe-SAC/NPC) mainly in the form of P-C bonds for CO2 electroreduction to CO in an aqueous solution. This catalyst exhibited a CO Faradaic efficiency of ≈97 % at a low overpotential of 320â mV, and a Tafel slope of only 59â mV dec-1 , comparable to state-of-the-art gold catalysts. Experimental analysis combined with DFT calculations suggested that single P atom in high coordination shells (n≥3), in particular the third coordination shell of Fe center enhanced the electronic localization of Fe, which improved the stabilization of the key *COOH intermediate on Fe, leading to superior CO2 electrochemical reduction performance at low overpotentials.