RÉSUMÉ
Lung cancer is a malignant tumour with the highest incidence and mortality worldwide. Clinically effective therapy strategies are underutilized owing to the lack of efficient models for evaluating drug response. One of the main reasons for failure of anticancer drug therapy is development of drug resistance. Anticancer drugs face severe challenges such as poor biodistribution, restricted solubility, inadequate absorption, and drug accumulation. In recent years, "organ-on-a-chip" platforms, which can directly regulate the microenvironment of biomechanics, biochemistry and pathophysiology, have been developed rapidly and have shown great potential in clinical drug research. Lung-on-a-chip (LOC) is a new 3D model of bionic lungs with physiological functions created by micromachining technology on microfluidic chips. This approach may be able to partially replace animal and 2D cell culture models. To overcome drug resistance, LOC realizes personalized prediction of drug response by simulating the lung-related microenvironment in vitro, significantly enhancing therapeutic effectiveness, bioavailability, and pharmacokinetics while minimizing side effects. In this review, we present an overview of recent advances in the preparation of LOC and contrast it with earlier in vitro models. Finally, we describe recent advances in LOC. The combination of this technology with nanomedicine will provide an accurate and reliable treatment for preclinical evaluation.
RÉSUMÉ
INTRODUCTION: Lung isolation is primarily accomplished using a double-lumen tube (DLT) or bronchial blocker. A precise and accurate size of the DLT is a prerequisite for ensuring its accurate placement. Three-dimensional (3D) reconstruction technology can be used to accurately reproduce tracheobronchial structures to improve the accuracy of DLT size selection. Therefore, we have developed automatic comparison software for 3D reconstruction based on CT data (3DRACS). In this study, we aimed to evaluate the efficiency of using 3DRACS to select the DLT size for endobronchial intubation in comparison with using the 'blind' DLT intubation method to determine the DLT size, which is based on height and sex. METHODS AND ANALYSIS: This is a prospective, single-centre, double-blind randomised controlled trial. In total, 200 patients scheduled for lung resection using a left DLT will be randomly allocated to the 3D group or the control group at a 1:1 ratio. A 3DRACS will be used for the 3D group to determine the size of the DLT, while in the case of the control group, the size of the DLT will be determined according to patient height and sex. The primary outcome is the success rate of placement of the left DLT without fibreoptic bronchoscopy (FOB). The secondary outcomes include the following: successful intubation time, degree of pulmonary atrophy, grade of airway injury, oxygenation during one-lung ventilation, postoperative sore throat and hoarseness, and number of times FOB is used. ETHICS AND DISSEMINATION: Ethical approval has been obtained from our local ethics committee (approval number: SCCHEC-02-2022-155). Written informed consent will be obtained from all participants before randomisation, providing them with clear instructions about the purpose of the study. The results will be disseminated through peer-reviewed publications and conferences. TRIAL REGISTRATION NUMBER: NCT06258954.
Sujet(s)
Intubation trachéale , Impression tridimensionnelle , Adulte , Femelle , Humains , Mâle , Bronchoscopie/méthodes , Méthode en double aveugle , Conception d'appareillage , Intubation trachéale/méthodes , Intubation trachéale/instrumentation , Ventilation sur poumon unique/méthodes , Ventilation sur poumon unique/instrumentation , Études prospectives , Essais contrôlés randomisés comme sujet , TomodensitométrieRÉSUMÉ
Introduction: As the third largest food crop in the world, maize has wide varieties with similar appearances, which makes identification difficult. To solve the problem of identification of hybrid maize varieties, a method based on hyperspectral image technology combined with a convolutional neural network (CNN) is proposed to identify maize varieties. Methods: In this study, 735 maize seeds from seven half-parent hybrid maize varieties were regarded as the research object. The maize seed images in the range of 900 ~ 1700nm were obtained by hyperspectral image acquisition system. The region of interest (ROI) of the embryo surface was selected, and the spectral reflectance of maize seeds was extracted. After Savitzky-Golay (SG) Smoothing pretreatment, Maximum Normalization (MN) pretreatment was performed. The 56 feature wavelengths were selected by Competitive Adaptive Reweighting Algorithm (CARS) and Successive Projection Algorithm (SPA). And the 56 wavelengths were mapped to high-dimensional space by high-dimensional feature mapping and then reconstructed into three-dimensional image features. A five-layer convolution neural network was used to identify three-dimensional image features, and nine (SG+MN)-(CARS+SPA)-CNN maize variety identification models were established by changing the input feature dimension and the depth factor size of the model layer. Results and Discussion: The results show that the maize variety classification model works best, when the input feature dimension is 768 and the layer depth factor d is 1.0. At this point, the model accuracy of the test set is 96.65% and the detection frame rate is1000 Fps/s in GPU environment, which can realize the rapid and effective non-destructive detection of maize varieties. This study provides a new idea for the rapid and accurate identification of maize seeds and seeds of other crops.
RÉSUMÉ
The aim of this study was to clarify the response characteristics of Chinese cabbage pakchoi (Brassica chinensis L.) under two particle size (100 nm and 1000 nm) polystyrene microplastic (PS-MPs) stress conditions. This study can provide a theoretical basis and experimental reference for the interpretation of the physiological and ecological mechanism of microplastic pollution and the bioremediation of microplastic-contaminated soil. Hydroponic experiments were carried out to study the effects of two particle sizes (100 nm and 1000 nm) of PS-MPs on growth, photosynthetic physiology, antioxidant enzyme activities, nutritional quality, anatomical structure, and canopy temperature in Chinese cabbage pakchoi. The results showed that PS-MPs stress significantly inhibited the growth and development of Chinese cabbage pakchoi. When PS-MPs stress was increased, the phenotypic indicators were significantly reduced. Meanwhile, PS-MPs stress significantly enhanced the oxidative stress response of Chinese cabbage pakchoi, such as the activities of catalase (CAT), peroxidase (POD), superoxide dismutase (SOD), and ascorbate peroxidase (APX) and the content of malondialdehyde (MDA) in leaves. Such a change tended to decrease the thickness of fenestrated and leaf and spongy tissues. Moreover, PS-MPs stress significantly increased the canopy population temperature of the Chinese cabbage pakchoi leaves. Microplastic stress had obvious inhibitory effects and toxic damage on the growth, development, and physical and chemical properties of Chinese cabbage pakchoi.
Sujet(s)
Brassica , Microplastiques , Matières plastiques , Polystyrènes/toxicité , TempératureRÉSUMÉ
PURPOSE: Femoral nerve block (FNB) is widely used in patients undergoing knee arthroscopy. However, the most commonly used concentration of ropivacaine (0.2% or above) may cause an unexpected decrease in the muscle strength of the quadriceps. Therefore, a lower concentration of ropivacaine (0.1%) for FNB was administered to investigate the effect on quadriceps strength and postoperative pain after knee arthroscopy. METHODS: This was a double-blind, randomized, controlled trial (ChiCTR2000041404). A total of 83 patients scheduled for elective knee arthroscopy were randomized to receive 0.1% or 0.2% ropivacaine for FNB under ultrasound guidance. The primary outcomes were quadriceps strength and numerical rating scale (NRS) pain score. Quadriceps strength was measured before surgery and 6 h and 24 h after surgery, while NRS score was recorded before surgery, at the postanaesthesia care unit (PACU), and 6 h and 24 h after surgery. Multiple linear regression tests were used to compare the differences in quadriceps strength and NRS score between the two groups. Two-factor analysis of variance, using the factors group and time of measurement, was used for repeated NRS scores. Secondary outcomes included knee mobility, side effects, patient satisfaction, and length of hospital stay. RESULTS: The mean (SD) quadriceps strength at 6 h after surgery was 7.5 (5.7) kg for the 0.1% ropivacaine group and 3.0 (4.4) kg for the 0.2% ropivacaine group. The mean difference adjusted for baseline characteristics was - 5.2 (95% CI - 7.2 to - 3.1) kg (P < 0.001). There was no significant difference between the two groups in quadriceps strength at 24 h after surgery. The mean differences in the average NRS score and maximum NRS score in the PACU were - 0.6 (P = 0.008) and - 1.0 (P < 0.001), respectively. There was no significant difference in NRS score at 6 h or 24 h after surgery. Two-factor analysis of variance showed no significant difference in the interaction factors of time and group for average NRS score and maximum NRS score. CONCLUSIONS: Compared with 0.2% ropivacaine, 0.1% ropivacaine for FNB preserved quadriceps strength at 6 h after knee arthroscopy while providing similar analgesic effects. LEVEL OF EVIDENCE: I.
Sujet(s)
Anesthésiques locaux , Bloc nerveux , Humains , Ropivacaïne , Anesthésiques locaux/usage thérapeutique , Nerf fémoral , Arthroscopie/effets indésirables , Bloc nerveux/effets indésirables , Douleur postopératoire/traitement médicamenteux , Douleur postopératoire/prévention et contrôle , Douleur postopératoire/étiologie , Muscle quadriceps fémoral/physiologie , Analgésiques/usage thérapeutique , Méthode en double aveugle , Analgésiques morphiniques/usage thérapeutiqueRÉSUMÉ
Honey has been used not only as a food source but also for medicinal purposes. Recent studies have indicated that honey exhibits antioxidant, hepatoprotective, hypolipidemic, hypoglycemic and anti-obesity properties, as well as anticancer, anti-atherosclerotic, hypotensive, neuroprotective and immunomodulatory activities. These health benefits of honey could be attributed to its wide range of nutritional components, including polysaccharides and polyphenols, which have been proven to possess various beneficial properties. It is notable that the composition of honey can also be affected by nectar, season, geography and storage condition. Moreover, the safety of honey requires caution to avoid any potential safety incidents. Therefore, this review aims to provide recent research regarding the chemical composition, biological activities and safety of honey, which might be attributed to comprehensive utilization of honey. © 2023 Society of Chemical Industry.
Sujet(s)
Miel , Miel/analyse , Polyphénols , Antioxydants/composition chimique , Nectar des plantesRÉSUMÉ
BACKGROUND: Although hormesis induced by heavy metals is a well-known phenomenon, the involved biological mechanisms are not fully understood. Cadmium (Cd) is a prevalent heavy metal in the environment. Exposure of Cd, via intake or consumption of Cd-contaminated air or food, poses a huge threat to human health. Chinese cabbage pakchoi (Brassica chinensis L.) is widely planted and consumed as a popular vegetable in China. Therefore, studying the response of Chinese cabbage pakchoi to Cd- stressed conditions is critical to assess whether cabbage can accumulate Cd and serve as an important Cd exposure pathway to human beings. In this study, we investigated the influence of Cd stress on growth, photosynthetic physiology, antioxidant enzyme activities, nutritional quality, anatomical structure, and canopy temperature in Chinese cabbage pakchoi. A partial least squares (PLS) model was used to quantify the relationship between physical and chemical indicators with Cd accumulation in cabbage, and identify the main controlling factors. RESULTS: Results showed that Cd stress significantly inhibited cabbage's growth and development. When Cd stress was increased, the phenotypic indicators were significantly reduced. Meanwhile, Cd stress significantly enhanced the oxidative stress response of cabbage, such as the activities of catalase (CAT), superoxide dismutase (SOD), peroxidase (POD), ascorbate peroxidase (APX), and the content of malondialdehyde (MDA) in leaves. Such a change tended to increase fenestrated tissues' thickness but decrease the thickness of leaf and spongy tissues. Moreover, Cd stress significantly increased soluble sugar, protein, and vitamin C contents in leaves as well as the temperature in the plant canopy. The PLS model analysis showed that the studied phenotypic and physicochemical indicators had good relationships with Cd accumulation in roots, shoots, and the whole plant of cabbage, with high coefficient of determination (R2) values of 0.891, 0.811, and 0.845, and low relative percent deviation (RPD) values of 3.052, 2.317, and 2.557, respectively. Furthermore, through analyzing each parameter's variable importance for projection (VIP) value, the SOD activity was identified as a key factor for indicating Cd accumulation in cabbage. Meanwhile, the effects of CAT on Cd accumulation in cabbage and the canopy mean temperature were also high. CONCLUSION: Cd stress has significant inhibitory effects and can cause damage cabbage's growth and development, and the SOD activity may serve as a key factor to indicate Cd uptake and accumulation in cabbage.
Sujet(s)
Brassica , Cadmium , Cadmium/toxicité , Chine , Stress physiologiqueRÉSUMÉ
Leaf chlorophyll content is an important indicator of the growth and photosynthesis of maize under water stress. The promotion of maize physiological growth by (AMF) has been studied. However, studies of the effects of AMF on the leaf chlorophyll content of maize under water stress as observed through spectral information are rare. In this study, a pot experiment was carried out to spectrally estimate the leaf chlorophyll content of maize subjected to different durations (20, 35, and 55 days); degrees of water stress (75%, 55% and 35% water supply) and two inoculation treatments (inoculation with Funneliformis mosseae and no inoculation). Three machine learning algorithms, including the back propagation (BP) method, least square support vector machine (LSSVM) and random forest (RF) method, were used to estimate the leaf chlorophyll content of maize. The results showed that AMF increased the leaf chlorophyll content, net photosynthetic rate (A), stomatal conductance (gs), transpiration rate (E), and water use efficiency (WUE) of maize but decreased the intercellular carbon dioxide concentration (Ci) of maize and atmospheric vapor pressure deficit (VPD) regardless of the water stress duration and degree. The first-order differential spectral data can better reflect the correlation between leaf chlorophyll content and spectrum of inoculated maize when compared with original spectral data. The BP model performed bestin modeling the maize leaf chlorophyll content, yielding the largest R 2-values and smallest root mean square error (RMSE) values, regardless of stress duration. These results provide a reliable basis for the effective monitoring of the leaf chlorophyll content of maize under water stress.
RÉSUMÉ
Pot experiments were conducted to investigate the influence of biochar addition and the mechanisms that alleviate Cd stress in the growth of tobacco plant. Cadmium showed an inhibitory effect on tobacco growth at different post-transplantation times, and this increased with the increase in soil Cd concentration. The growth index decreased by more than 10%, and the photosynthetic pigment and photosynthetic characteristics of the tobacco leaf were significantly reduced, and the antioxidant enzyme activity was enhanced. Application of biochar effectively alleviated the inhibitory effect of Cd on tobacco growth, and the alleviation effect of treatments is more significant to the plants with a higher Cd concentration. The contents of chlorophyll a, chlorophyll b, and carotenoids in the leaves of tobacco plants treated with biochar increased by 9.99%, 12.58%, and 10.32%, respectively, after 60 days of transplantation. The photosynthetic characteristics index of the net photosynthetic rate increased by 11.48%, stomatal conductance increased by 11.44%, and intercellular carbon dioxide concentration decreased to 0.92. Based on the treatments, during the growth period, the antioxidant enzyme activities of tobacco leaves comprising catalase, peroxidase, superoxide dismutase, and malondialdehyde increased by 7.62%, 10.41%, 10.58%, and 12.57%, respectively, after the application of biochar. Our results show that biochar containing functional groups can effectively reduce the effect of Cd stress by intensifying the adsorption or passivation of Cd in the soil, thereby, significantly reducing the Cd content in plant leaves, and providing a theoretical basis and method to alleviate soil Cd pollution and effect soil remediation.
Sujet(s)
Cadmium , Polluants du sol , Cadmium/analyse , Cadmium/toxicité , Charbon de bois , Chlorophylle A , Sol , Polluants du sol/analyse , Polluants du sol/toxicité , NicotianaRÉSUMÉ
To develop a stable estimation model and identify effective wavelengths that could explain the variations in leaf nitrogen (N) concentration with different N supplies, growing seasons, ecological locations, growth stages, and wheat cultivars. Four field experiments were performed during two consecutive years (2017-2019) at three sites (Yuanyang, Hebi, and Wenxian) in Henan, China. In situ canopy spectral reflectance data under the aforementioned N supply conditions were obtained over a range of 400-950 nm (visible and near-infrared region). On the basis of the canopy raw spectral reflectance data and their subsequent transformation by two different techniques, first-derivative reflectance (FDR) and continuum removal (CR), four multivariate regression methods were comparatively analyzed and used to develop predictive models for estimating leaf N concentration: multiple linear regression (MLR), principal component regression (PCR), partial least square (PLS), and support vector machine (SVM). Results showed that leaf N concentration and canopy reflectance significantly varied with the levels of N fertilization, and a good correlation was observed for all the spectral techniques. Seven wavelengths with relatively higher r values than the bands of the raw spectra centered at 508, 525, 572, 709, 780, 876, and 925 nm were specified using the FDR technique. Based on the full wavelengths, the FDR-SVM model exhibited a good performance for leaf N concentration estimation, with coefficients of determination (r 2 val) for the validation datasets and corresponding relative percent deviations (RPDval) values of 0.842 and 2.383, respectively. However, the FDR-PLS yielded a more accurate assessment of the leaf N concentration than did the other methods, with r 2 val and RPDval values of 0.857 and 2.535, respectively. The variable importance in projection (VIP) scores from the FDR-PLS with the all canopy spectral region were used to screen the effective wavelengths of the spectral data. Therefore, six effective wavelengths centered at 525, 573, 710, 780, 875, and 924 nm were identified for leaf N concentration estimation. The SVM regression method with the effective wavelengths showed excellent performance for leaf N concentration estimation with r 2 val = 0.823 and RPDval = 2.280. These results demonstrated that the in situ canopy spectral technique is promising for the estimation of leaf N concentration in winter wheat based on the FDR-PLS regression model and the effective wavelengths identified.
RÉSUMÉ
A new and sensitive electrochemical sensor for rutin determination was developed based on cetyltrimethylammonium chloride (CTAC) functionalized graphene (Gr) and palladium nanoparticles (Pd) (CTAC-Gr-PdNPs) composite. Rutin displayed remarkably increased electrochemical activity on the CTAC-Gr-PdNPs composite modified electrode due to the synergistic effect of the large surface area and electrocatalytic activity of both Gr and Pd nanoparticles, which offers the feasibility for highly sensitive determination of rutin via electrochemistry. Under the optimal experimental conditions, the oxidation peak current of rutin was proportional to its concentration in the range of 2.0 × 10-8-1.0 × 10-6 mol L-1, and the limit of detection (LOD) was 5 nM (S/N = 3). The developed method was successfully applied to determine rutin in pharmaceuticals with satisfactory recoveries, which shows that the fabricated sensor has potential in pharmaceutical analysis.
Sujet(s)
Techniques électrochimiques/méthodes , Graphite/composition chimique , Nanoparticules métalliques/composition chimique , Palladium/composition chimique , Rutoside/analyse , Techniques électrochimiques/instrumentation , Électrochimie , Électrodes , Conception d'appareillage , Limite de détection , Oxydoréduction , Rutoside/pharmacologieRÉSUMÉ
A one-pot dual functionalization of indoles has been developed. The simultaneous C3-formylation and N-aminomethylation of indoles can be achieved using readily available potassium iodide as a catalyst and tert-butyl peroxybenzoate as a co-oxidant.
Sujet(s)
Amines/composition chimique , Dérivés de l'aniline/composition chimique , Indoles/composition chimique , Iodure de potassium/composition chimique , Catalyse , Méthylation , Structure moléculaireRÉSUMÉ
An nBu(4)NI-catalyzed benzylic C-H acyloxylation of alkylarenes with readily available aromatic aldehydes has been developed. These reactions occur under mild and clean reaction conditions using tert-butyl hydroperoxide as the green terminal oxidant.
Sujet(s)
Aldéhydes/composition chimique , Dérivés du benzène/composition chimique , Esters/synthèse chimique , Catalyse , Esters/composition chimique , Structure moléculaireRÉSUMÉ
nBu(4)NI-catalyzed C3-selective formylation of N-H and N-substituted indoles by using N-methylaniline as a formylating reagent was first successfully demonstrated.
Sujet(s)
Dérivés de l'aniline/composition chimique , Indoles/composition chimique , Iodure de sodium/composition chimique , Amines/composition chimique , Carbone/composition chimique , Catalyse , Peroxyde d'hydrogène/composition chimiqueRÉSUMÉ
Novel analogs of SGLT2 inhibitors containing the 1,2,3-triazole motif were designed and synthesized for urinary glucose excretion evaluation. The C-glucosides with triazole aglycone can be easily constructed by click chemistry. Most of the synthesized compounds increased urinary glucose excretion and demonstrated inhibition of glucose transport.