RÉSUMÉ
In this work, twenty-one core samples of tailings wastes were collected from Yeshan iron tailings pond in Jiangsu Province, China. The mineralogical-chemical properties of Yeshan iron ore tailings (IOTs) were investigated to explore potential utilization. Mineralogical investigations and mineral liberation analysis indicated that the iron tailings have complex texture and incomplete mineral liberation, suggesting further grinding can improve higher recovery. Yeshan IOTs accumulated much higher MgO originating from dolomite, therefore, it could be infeasible to utilize a large quantity of Yeshan IOTs as alternative raw meals for cement clinker or replace aggregates in concrete. 2D vertical distribution profiles created with the ordinary kriging method presented heterogeneous distributions of major elements, and the variation trends were inconsistent. The results obtained in this work provide insight for exploiting and reducing Yeshan IOTs.
RÉSUMÉ
This study is the first to research the microstructure and mechanical properties of the workpiece after additive friction stir deposition (AFSD) of the feedstock at different heat treatment stages. AA2219 aluminum alloys with three different heat treatment stages were selected as the feedstock, and alloys with dense structure were successfully prepared by the additive friction stir deposition AFSD process. Experimental results show that AFSD exhibits an excellent ability to refine grains and improve the uniform distribution of precipitates in the second phase, thereby improving the plasticity of AA2219 alloy after the AFSD process. Because of the continuous dynamic recrystallization (CDRX) in the AA2219 alloy during AFSD, the grain size after the AFSD process is independent of the initial feedstock grain size for three samples. The equilibrium phase (θ) size is genetically related to the initial size of the second-phase particles in the feedstock. Due to grain refinement and dislocation strengthening, the yield strength of AA2219-casting increased significantly from 79.8 MPa to 124.1 MPa after AFSD. The yield strength of the AA2219-T4 decreases slightly from 151.8 MPa to 140.4 MPa after AFSD. The precipitation of the second phase leads to a decrease in solid solution strengthening and dislocation strengthening. However, grain refinement strengthening partially offsets this reduction. The yield strength of AA2219-T87 decreased from 398.5 MPa to 147.2 MPa after AFSD. As such, grain refinement strengthening and solid solution strengthening by the AFSD process are much smaller than the yield strength lost by precipitation strengthening and dislocation strengthening.
RÉSUMÉ
In this study, composite plates of 6061/TA1 were successfully manufactured using additive friction stir deposition (AFSD). The impact of preheating temperatures (room temperature, 100 °C, 200 °C) on the interfacial microstructure and interface mechanical properties at various deposition zones was studied. The results showed that as the preheating temperature increased or when the deposit zone shifted from the boundary to the center, the diffusion width of Al and Ti increased, accompanied by an increase in bonding shear strength. Moreover, in the boundary zone of the sample preheated at room temperature (P-RT), only mechanical bonding was observed, resulting in the lowest bonding shear strength. Conversely, the other samples exhibited a combination of mechanical and metallurgical bonding. Under the preheating temperature of 200 °C, interfacial intermetallic compounds were observed near the center zone, which exhibited the highest bonding shear strength.
RÉSUMÉ
Pigmented rodent tooth enamel is mainly composed of parallel hydroxyapatite nanorods and a small amount of organic matrix. These hydroxyapatite nanorods tend to be carbonated and contain traces of iron, fluorine, and magnesium. The pigmented rodent tooth enamel which contains trace iron is stronger and more resistant to acid corrosion than unpigmented rodent enamel, which could provide inspiration for the preparation and synthesis of high performance and corrosion resistant artificial materials. However, the regulatory role and mechanical enhancement of iron ions in enamel growth are unclear. Here, we synthesized enamel-like fluorapatite nanorod arrays in vitro using a mineralization technique at room-temperature. To investigate the regulatory effect of iron ions on the fluorapatite nanorod arrays (FAP-Fe), the phosphate solution is slowly transfused dropwise in the calcium ion solution, and different concentrations of iron ions are added to the calcium ion solution in advance. We demonstrated that fluorapatite nanorod arrays (FAP) can be epitaxially grown from amorphous calcium phosphate nanoparticles and iron ions can improve the microstructure of FAP nanorod arrays and obtain the same enamel bundle structure as the natural enamel. Moreover, high concentration of iron ions can inhibit the crystallization of fluorapatite. The FAP-Fe nanorod arrays controlled by 0.02 mM Fe3+ have good mechanical properties. Their hardness is 1.34 ± 0.02 GPa and Young's modulus is 65.3 ± 0.4 GPa, respectively. This work is helpful to understand the role of trace elements in natural enamel in the regulation of enamel formation and to provide a theoretical foundation for the preparation of high strength artificial composites, which can play a greater role in the fields of biological alternative materials, anti-oil coating, oil/water separation, anti-bioadhesion and so on.
RÉSUMÉ
Natural killer (NK) cells are crucial for immune responses to viral infections. CD160 is an important NK cell activating receptor, with unknown function in HIV infection. Here, we found that CD160 expression was reduced on NK cells from HIV-infected individuals and its expression was negatively correlated with HIV disease progression. Further, GLUT1 expression and glucose uptake were higher in CD160+ NK cells, and the results of RNA-seq and flow cytometry demonstrated that CD160 positively regulated glucose metabolism through the PI3K/AKT/mTOR/s6k signaling pathway, thereby enhancing NK cell function. Moreover, we determined that reduced CD160 expression on NK cells could be attributed to the higher plasma levels of TGF-ß1 in HIV-infected individuals. Overall, these results highlight the vital role of CD160 in HIV disease progression and regulation of glucose metabolism, indicating a potential target for HIV immunotherapy.
Sujet(s)
Antigènes CD , Infections à VIH , Antigènes CD/métabolisme , Évolution de la maladie , Protéines liées au GPI/métabolisme , Glucose/métabolisme , Transporteur de glucose de type 1/métabolisme , Humains , Cellules tueuses naturelles , Phosphatidylinositol 3-kinases/métabolisme , Protéines proto-oncogènes c-akt/métabolisme , Récepteurs immunologiques/métabolisme , Sérine-thréonine kinases TOR/métabolisme , Facteur de croissance transformant bêta-1/métabolismeRÉSUMÉ
Under visible light, non-photosynthetic microorganism/semiconductor has recently shown promising applications in biofuel production, bioenergy generation and pollutant removal. However, the understanding of electron transfer mechanism at the biotic-abiotic interface is limited. Herein, mixed culture/carbon nitride and pure culture (Stenotrophomonas maltophilia HP14)/carbon nitride were constructed to reveal the energy conversion pathway under visible light. Enhanced electron transfer was observed on the biotic-abiotic interface. The photocurrent of non-photosynthetic S. maltophilia HP14/g-C3N4/ITO with riboflavin addition was 10.2-fold higher than that of g-C3N4/ITO control. As the electron donor, S. maltophilia HP14 transfer bio-electrons to self-secreted riboflavin and valence band of semiconductor. Riboflavin (RF) accept bio-electrons and photogenerated electrons to form 1,5-dihydroflavin (RFH2). While RFH2 is able to transfer electrons to the valence band of carbon nitride and transform into RF again. However, riboflavin is not stable under visible light irradiation, which may lead to a decreased photocurrent. This study demonstrated the role of redox active compounds at the microorganism/semiconductor interface and described a possibility for non-photosynthetic microorganisms to capture and utilize visible light.
Sujet(s)
Graphite , Catalyse , Électrons , Lumière , Riboflavine , SemiconducteursRÉSUMÉ
Amorphous intergranular phases in mature natural tooth enamel are found to provide better adhesion and could dramatically affect their mechanical performance as a structure reinforcing phase. This study successfully synthesized an amorphous intergranular phase enhanced fluorapatite array controlled by Mg2+ (FAP-M) at room temperature. Furthermore, atom probe tomography (APT) observation presents that Mg2+ is enriched at grain boundaries during the assembly of enamel-like fluorapatite arrays, leading to the formation of intergranular phases of Mg-rich amorphous calcium phosphate (Mg-ACP). APT results also demonstrated that the segregation of Mg2+ caused the chemical gradient in nanocrystalline attachment and realignment under the drive of inherent surface stress. These results indicate that the amorphous intergranular phases served like glue to connect each nanorod to reinforce the enamel-like arrays. Therefore, the as-received FAP-M artificial enamel exhibits excellent mechanical properties, with hardness and Young's modulus of 2.90 ± 0.13 GPa and 67.9 ± 3.4 GPa, which were â¼8.3 and 2.2 times higher than those of FAP arrays without controlled by Mg2+, respectively.
Sujet(s)
Apatites , Émail dentaire , DuretéRÉSUMÉ
Organisms can synthesize heterogeneous structures with excellent mechanical properties through mineralization, the most typical of which are teeth. The tooth is an extraordinarily resilient bi-layered material that is composed of external enamel perpendicular to the tooth surface and internal dentin parallel to the tooth surface. The synthesis of enamel-like heterostructures with good mechanical properties remains an elusive challenge. In this study, we applied a biomimetic mineralization method to grow fluorapatite/CaCO3 (FAP/CaCO3) heterogeneous structured thin films that mimic their biogenic counterparts found in teeth through a three-step pathway: coating a polymer substrate, growing a layered calcite film, and mineralization of a fluorapatite columnar array on the calcite layer. The synthetic heterostructure composites combine well and exhibit good mechanical properties comparable to their biogenic counterparts. The FAP/CaCO3 heterogeneous structured composite exhibits excellent mechanical properties, with a hardness and Young's modulus of 1.99 ± 0.02 GPa and 47.5 ± 0.6 GPa, respectively. This study provides a reasonable new idea for unique heterogeneous structured materials designed at room temperature.
RÉSUMÉ
Perfluorooctanoic acid (PFOA) is persistent in the environment. The activities of microorganisms alone are insufficient for the decomposition of PFOA, but microorganisms can contribute positively to the degradation of PFOA in synergistic systems. Herein, a synergistic system combining photocatalytic decay with microbial degradation of the transformation products was applied to degrade 500.0 µg L-1 PFOA. The microorganisms increased the total removed percentage by 30.7% to a final percentage of 79.7 ± 9.4% in comparison with the photocatalytic method alone. Moreover, an additional 44.2% of removed total organic carbon and additional defluorination percentage of 24.5% were obtained after the synergistic tests. The 16S RNA sequencing analysis indicated that Stenotrophomonas, Bacillus, Pseudomonas, and Brevundimonas were highly enriched in the functional microbial community, which was simultaneously shaped by photocatalysis and substances. This study found it would be feasible to use a synergistic method containing photocatalysis and a microbial community for the degradation of low-concentrations of PFOA, and the results provided a reference to modified the removal efficiency of the synergistic system by looking insight into the relationship between the functional microbial community and PFOA.
Sujet(s)
Caprylates , Fluorocarbones , Études de faisabilitéRÉSUMÉ
The formation of natural structures found in biological systems is wonderful and can be completed at ambient temperatures in contrast to artificial technologies wherein harsh conditions are common prerequisites. A new research direction, "bioprocess inspired manufacturing", is proposed for fabricating advanced materials with novel structures and functions. Nacre consists of an ordered multilayer structure of crystalline calcium carbonate lamellae separated by organic layers exhibiting mechanical toughness, which transcends that of its constituent components. Inspired by the nacre formation process, a microscale additive manufacturing mineralization method is proposed for achieving a multilayered organic-inorganic layered structure. In this work, layered calcite was synthesized on the surface of chitosan (CS) films at room temperature under the coordinated control of magnesium ions (Mg2+) and polyacrylic acid (PAA). The CS films and layered calcite are sequentially assembled in a layer-by-layer deposition approach to form an organic-inorganic hybrid structure. The nacre-like chitosan/CaCO3 (CS/CaCO3) composites exhibit high transparency and underwater superoleophobicity. Impressively, the hardness (2.35 ± 0.03 GPa) and Young's modulus (58.1 ± 0.5 GPa) of the as-prepared (CS/CaCO3) composites are comparable to those of their biological counterparts. This study provides a rational bioprocess-inspired room-temperature mineralization method to develop advanced composite materials with good performance.
Sujet(s)
Matériaux biomimétiques/composition chimique , Carbonate de calcium/composition chimique , Chitosane/composition chimique , Résines acryliques/composition chimique , Matériaux biomimétiques/synthèse chimique , Ions/composition chimique , Magnésium/composition chimique , Structure moléculaire , Taille de particule , ViscositéRÉSUMÉ
Ciprofloxacin is an extensively used fluoroquinolone antibiotic, which exists in aquatic environment, causing detrimental effects to the aquatic ecosystem and thus, indirectly to humans. Thus, an efficient and rapid removal method for ciprofloxacin is urgently needed. Intimately coupled photocatalysis and biodegradation has proven to be highly efficient, low-cost, and eco-friendly. In this study, cube polyurethane sponges modified with visible light-responsive g-C3N4 and mixed culture microbes were used to increase the ciprofloxacin removal efficiency. Subsequently, 94% of ciprofloxacin was removed by photocatalytic-biodegradation and 12 degradation products and possible degradation pathways were analyzed. Photocatalytic-biodegradation had a 1.57 times higher total organic carbon (TOC) removal rate than photocatalytic degradation. The microbial community structure after 72 h of photocatalytic biodegradation was examined. High microbial richness, evenness, and functional dominant species belong to Proteobacteria, which were closely associated with the utilization of antibiotics, may be majorly responsible for the highly efficient removal degradation process. Additionally, microbes retarded the interaction of photogenerated electrons and holes, which may contribute to the increasing mineralization. The findings demonstrated the potential ability of photocatalytic biodegradation in degrading bio-recalcitrant compounds and provide new insights into photocatalytic coupled with biodegradation for removal of ciprofloxacin.
Sujet(s)
Ciprofloxacine , Écosystème , Dépollution biologique de l'environnement , Carbone , Catalyse , HumainsRÉSUMÉ
Tooth enamel is composed of arrayed fluorapatite (FAP) or hydroxyapatite nanorods modified with Mg-rich amorphous layers. Although it is known that Mg2+ plays an important role in the formation of enamel, there is limited research on the regulatory role of Mg2+ in the synthesis of enamel-like materials. Therefore, we focus on the regulatory behavior of Mg2+ in the fabrication of biomimetic mineralized enamel-like structural materials. In the present study, we adopt a bioprocess-inspired room-temperature mineralization technique to synthesize a multilayered array of enamel-like columnar FAP/polymer nanocomposites controlled by Mg2+ (FPN-M). The results reveal that the presence of Mg2+ induced the compaction of the array and the formation of a unique Mg-rich amorphous-reinforced architecture. Therefore, the FPN-M array exhibits excellent mechanical properties. The hardness (2.42 ± 0.01 GPa) and Young's modulus (81.5 ± 0.6 GPa) of the as-prepared FPN-M array are comparable to those of its biological counterparts; furthermore, the enamel-like FPN-M array is translucent. The hardness and Young's modulus of the synthetic array of FAP/polymer nanocomposites without Mg2+ control (FPN) are 0.51 ± 0.04 and 43.5 ± 1.6 GPa, respectively. The present study demonstrates a reliable bioprocess-inspired room-temperature fabrication technique for the development of advanced high-performance composite materials.
Sujet(s)
Apatites/composition chimique , Émail dentaire/composition chimique , Magnésium/composition chimique , Nanocomposites/composition chimique , Polymères/composition chimique , Température , Biomimétique , Essais de duretéRÉSUMÉ
The People's Republic of China has experienced extraordinary economic growth, which is associated with increases in chronic health stressors. We examined the impact of John Henryism-a coping mechanism-on various health indicators in a sample of patients (n = 642) in China. John Henryism significantly related to increased medical adherence (B=.03,p<.001) and health-promotional behaviors (B=.02,p<.001). John Henryism predicted several indicators of psychological health through social support. John Henryism was also related to increased alcoholism (B=.04,p<.05). The findings highlight the complexity and paradoxical implications of John Henryism on health. Implications are discussed in relation to China's epidemiological and age demographic shifts.
Sujet(s)
Adaptation psychologique , Comportement en matière de santé , Chine , Humains , Soutien socialRÉSUMÉ
MicroRNAs (miRNAs) play a critical role in glioblastoma initiation and progression. PIWIL1, a human homolog of the PIWI family, has a critical effect on glioblastoma progression. In present study, we found that the expression of miR-154-5p was significantly lower in glioblastoma. Our results suggested that the overexpression of miR-154-5p suppressed proliferation and metastasis, induced apoptosis, whereas inhibiting the expression of miR-154-5p significantly promoted proliferation and metastasis of glioblastoma. We further proved that miR-154-5p directly integrated with the 3'-UTR of PIWIL1 and reintroduction of PIWIL1 can rescue the phenotype changes induced by miR-154-5p. Taken together, our study reveals that miR-154-5p can counteract the malignant phenotypes of glioblastoma by targeting PIWIL1, which might be beneficial to reveal new therapeutic targets for glioblastoma.
Sujet(s)
Prolifération cellulaire/physiologie , Glioblastome/métabolisme , microARN/métabolisme , Métastase tumorale/physiopathologie , Animaux , Antinéoplasiques/administration et posologie , Apoptose/physiologie , Protéines Argonaute/génétique , Protéines Argonaute/métabolisme , Encéphale/métabolisme , Lésions traumatiques de l'encéphale/métabolisme , Tumeurs du cerveau/traitement médicamenteux , Tumeurs du cerveau/métabolisme , Cycle cellulaire/physiologie , Lignée cellulaire tumorale , Mouvement cellulaire/physiologie , Régulation négative , Régulation de l'expression des gènes tumoraux , Glioblastome/traitement médicamenteux , Glioblastome/anatomopathologie , Humains , Mâle , Souris de lignée BALB C , Souris nude , microARN/administration et posologie , Invasion tumorale/physiopathologie , Transplantation tumoraleRÉSUMÉ
This study for the first time confirmed that eight dominating protozoan species, Cryptomonas erosa, Euglena axyuris, Euglena caudate, Euglena gasterosteus, Euglena acus, Vorticella campanula, Vorticella convallaria and Epistylis lacustris, were the pollution tolerant species at chemical oxygen demand 54-104mg/L. These species cannot be used as indicator for clean water quality as commonly believed. The protozoa can be actively participating in the energy transfer chain between nano-planktonic and higher plants in polluted wetlands.