RÉSUMÉ
Singlet oxygen (1O2), as a fundamental hallmark in photodynamic therapy (PDT), enables ground-breaking clinical treatment in ablating tumors and killing germs. However, accurate in vivo monitoring of 1O2 remains a significant challenge in probe design, with primary difficulties arising from inherent photo-induced side reactions with poor selectivity. Herein, we report a generalizable zwitterionic strategy for ultra-stable near-infrared (NIR) chemiluminescent probes that ensure a highly specific [2 + 2] cycloaddition between fragile electron-rich enolether units and 1O2 in both cellular and dynamic in vivo domains. Innovatively, zwitterionic chemiluminescence (CL) probes undergo a conversion into an inert ketone excited state with an extremely short lifetime through conical intersection (CI), thereby affording sufficient photostability and suppressing undesired photoreactions. Remarkably, compared with the well-known commercial 1O2 probe SOSG, the zwitterionic probe QMI exhibited an ultra-high signal-to-noise ratio (SNR, over 40-fold). Of particular significance is that the zwitterionic CL probes demonstrate excellent selectivity, high sensitivity, and outstanding photostability, thereby making a breakthrough in real-time tracking of the FDA-approved 5-ALA-mediated in vivo PDT process in living mice. This innovative zwitterionic strategy paves a new pathway for high-performance NIR chemiluminescent probes and high-fidelity feedback on 1O2 for future biological and medical applications.
RÉSUMÉ
Large-tow carbon fiber-reinforced polymer composites (CFRP) have great application potential in civil engineering due to their low price, but their basic mechanical properties are still unclear. The tensile properties of large-tow CFRP rods and plates were investigated in this study. First, the tensile properties of unidirectional CFRP rods and plates were studied, and the test results of the relevant mechanical properties were statistically analyzed. The tensile strength of the CFRP rod and plate are 2005.97 MPa and 2069.48 MPa. Second, the surface of the test specimens after failure was observed using a scanning electron microscope to analyze the type of failure and damage evolution process. Finally, the probabilistic characteristics of the mechanical properties were analyzed using normal, lognormal, and Weibull distributions for parameter fitting. Quasi-optimality tests were performed, and a probability distribution model was proposed for the mechanical properties of large-tow CFRP rods and plates.
RÉSUMÉ
Aberrant hypoxic stress will initiate a cascade of pathological consequence observed prominently in tumorigenesis. Understanding of hypoxia's role in tumorigenesis is highly essential for developing effective therapeutics, which necessitates reliable tools to specifically distinguish hypoxic tumor cells (or tissues) and correlate their dynamics with the status of disease in complex living settings for precise theranostics. So far, disparate hypoxia-responsive probe molecules and prodrugs were designed via chemical or enzymatic reactions, yet their capability in real-time reporting pathogenesis development is often compromised due to unrestricted diffusion and less selectivity towards the environmental responsiveness. Herein we present an oxygen-insensitive nitroreductase (NTR)-activatable glycan metabolic reporter (pNB-ManNAz) capable of covalently labeling hypoxic tumor cells and tissues. Under pathophysiological hypoxic environments, the caged non-metabolizable precursor pNB-ManNAz exhibited unique responsiveness to cellular NTR, culminating in structural self-immolation and the resultant ManNAz could incorporate onto cell surface glycoproteins, thereby facilitating fluorescence labeling via bioorthogonal chemistry. This NTR-responsive metabolic reporter demonstrated broad applicability for multicellular hypoxia labeling, particularly in the dynamic monitoring of orthotopic tumorigenesis and targeted tumor phototherapy in vivo. We anticipate that this approach holds promise for investigating hypoxia-related pathological progression, offering valuable insights for accurate diagnosis and treatment.
RÉSUMÉ
Unidirectional carbon fiber-reinforced polymer (CFRP) may exhibit significant mechanical softening in the transverse direction at an elevated temperature. While significant transverse compressive stress exists on CFRP due to the clamping force from anchorage, a CFRP cable may exhibit anchorage failure when suffering an accidental fire disaster. The high-temperature resistance of a CFRP cable anchorage is critical, and clarifying the performance deterioration and failure mechanism of a CFRP cable anchorage system at elevated temperature is fundamental for clarifying its fire resistance. This paper reviews the current research status of the high-temperature resistance of CFRP cable anchorage systems from two aspects, including the high-temperature resistance of the comprising materials and the anchorage system. The reviews on the high-temperature properties of the comprising materials are summarized from two aspects. Firstly, the mechanical performance degradation of bonding epoxy resin at elevated temperatures and the effect of a filler on its mechanical-thermal properties are analyzed. Secondly, the mechanical performances of CFRP composites at elevated temperatures are summarized, with consideration of the stress state of the CFRP cable under the constraint of an anchorage device. The reviews on the high-temperature resistance of the anchorage system also include two aspects. Firstly, the temperature field solution method for the anchorage system is summarized and discussed. Secondly, the current research status of the anchorage performance at elevated temperatures is also summarized and discussed. Based on these reviews, the research shortage of the high-temperature resistance of CFRP cable anchorage systems is summarized, and further research is recommended.
RÉSUMÉ
Nuclear spin polarization plays a crucial role in quantum information processing and quantum sensing. In this work, we demonstrate a robust and efficient method for nuclear spin polarization with boron vacancy (V_{B}^{-}) defects in hexagonal boron nitride (h-BN) using ground-state level anticrossing (GSLAC). We show that GSLAC-assisted nuclear polarization can be achieved with significantly lower laser power than excited-state level anticrossing, making the process experimentally more viable. Furthermore, we have demonstrated direct optical readout of nuclear spins for V_{B}^{-} in h-BN. Our findings suggest that GSLAC is a promising technique for the precise control and manipulation of nuclear spins in V_{B}^{-} defects in h-BN.
RÉSUMÉ
BACKGROUND: Cardiometabolic multimorbidity (CMM) is a growing global health problem, and obstructive sleep apnea (OSA) is recognized as an important risk factor for cardiovascular disease. However, the impact of OSA on the prognosis of CMM patients remains unclear. METHODS: This study was a sub-study of OSA-acute coronary syndrome (ACS) and included 1, 927 hospitalized ACS patients. Patients were divided into the CMM group and the non-CMM group. OSA was diagnosed using the apnea-hypopnea index (AHI). The primary endpoint was major adverse cardiovascular and cerebrovascular events (MACCE). The secondary endpoint included cardiac events, all-cause death and all repeat revascularizations. RESULTS: This study enrolled 1, 927 patients hospitalized for ACS, with a median follow-up of 3 years. Among them, 723 patients (37.5%) had CMM, while 1, 204 patients (62.5%) did not have CMM. Over half of the patients in each group had OSA. OSA patients exhibited worse cardiometabolic profiles than their non-OSA counterparts, including higher body mass index (BMI), glycemic indices, lipids and inflammation. In the CMM group, OSA patients had a significantly higher incidence of MACCE than non-OSA patients (34.7% vs. 23.7%, p = 0.004). These results remained significant after adjustment, indicating that OSA substantially increased the risk of MACCE in the CMM group (adjusted hazard ratio [HR]: 1.432; 95% confidence interval [CI]: 1.017-2.016; p = 0.040). Conversely, the incidence of MACCE was similar between OSA and non-OSA subgroups within the non-CMM cohort. Subgroup analyses showed that OSA increased the risk of MACCE in CMM patients aged ≥ 60 years (adjusted HR: 1.642; 95% CI: 1.031-2.615; p = 0.037) and in those with specific clinical characteristics. CONCLUSION: OSA significantly impacts the prognosis of CMM patients, highlighting the need for targeted OSA screening and management strategies to improve outcomes in this population potentially.
RÉSUMÉ
This study introduces an innovative wedge anchor for double-layer carbon fiber reinforced polymer (CFRP) plate cable to address the current limitation of traditional wedge anchors. By employing the design concept of "secondary force transmission path", the friction force for anchoring the CFRP plate is effectively transferred into the barrel through its contracting wedge, thus reducing the clamping pressure requirement of traditional wedge anchorage for anchoring thick or double-layer CFRP plates. Based on this conception, this study presents a theoretical analysis model for predicting the influence of parameter variations on the compressive stress of the CFRP plate, which can serve as a tool for rapid configuration preliminary design. Through finite element analysis, the internal stress distribution of the anchor is thoroughly investigated, and the theoretical analysis model for fast predicting compressive stress of CFRP plate is also validated. The results also indicate that the anchorage conception is valid and effective, providing sufficient anchorage of CFPR plates with an anchorage length of 100 mm.
RÉSUMÉ
Rice is one of the world's major food crops. Changes in major climatic factors such as temperature, rainfall, solar radiation and carbon dioxide (CO2) concentration have an important impact on rice growth and yield. However, many of the current studies that predict the impact of future climate change on rice yield are affected by uncertainties such as climate models, climate scenarios, model parameters and structure, and showing great differences. This study was based on the assessment results of the impact of climate change on rice in the future of 111 published literature, and comprehensively analyzed the impact and uncertainty of climate change on rice yield. This study utilized local polynomial (Loess) regression analysis to investigate the impact of changes in mean temperature, minimum temperature, maximum temperature, solar radiation, and precipitation on relative rice yield variations within a complete dataset. A linear mixed-effects model was used to quantitatively analyze the relationships between the restricted datasets. The qualitative analysis based on the entire dataset revealed that rice yields decreased with increasing average temperature. The precipitation changed between 0 and 25 %, it was conducive to the stable production of rice, and when the precipitation changed >25 %, it would cause rice yield reduction. The change of solar radiation was less than -1.15 %, the rice yield increases with the increase of solar radiation, and when the change of solar radiation exceeds -1.15 %, the rice yield decreases. Elevated CO2 concentrations and management practices could mitigate the negative effects of climate change. The results of a quantitative analysis utilizing the mixed effects model revealed that average temperature, precipitation, CO2 concentration, and adaptation methods all had a substantial impact on rice production, and elevated CO2 concentrations and management practices could exert positive influences on rice production. For every 1 °C and 1 % increase in average temperature and precipitation, rice yield decreased by 3.85 % and 0.56 %, respectively. For every 100 ppm increase in CO2 concentration, rice yield increased by 7.1 %. The variation of rice yield under different climate models, study sites and climate scenarios had significant variability. Elevated CO2 concentrations and management practices could compensate for the negative effects of climate change, benefiting rice production. This study comprehensively collected and analyzed a wide range of literature and research, which provides an in-depth understanding of the impacts of climate change on rice production and informs future research and policy development.
Sujet(s)
Changement climatique , Produits agricoles , Oryza , Oryza/croissance et développement , Produits agricoles/croissance et développement , Dioxyde de carbone/analyse , Modèles climatiques , Température , Agriculture/méthodesRÉSUMÉ
BACKGROUND: Severe burn wounds face two primary challenges: dysregulated cellular impairment functions following infection and an unbalanced wound hydration microenvironment leading to excessive inflammation and collagen deposition. These results in hypertrophic scar contraction, causing significant deformity and disability in survivors. METHODS: A three-dimensional (3D) printed double-layer hydrogel (DLH) was designed and fabricated to address the problem of scar formation after burn injury. DLH was developed using methacrylated silk fibroin (SFMA) and gelatin methacryloyl (GelMA) for the upper layer, and GelMA and hyaluronic acid methacryloyl (HAMA) for the lower layer. To combat infection, copper-epigallocatechin gallate (Cu-EGCG) was incorporated into the lower layer bioink, collectively referred to as DLS. To balance wound hydration levels, HaCaT cells were additionally encapsulated in the upper layer, designed as DLS/c. FINDINGS: DLH demonstrated suitable porosity, appropriate mechanical properties, and excellent biocompatibility. DLS exhibited potent antimicrobial properties, exerted anti-inflammatory effects by regulating macrophage polarisation, and may enhance angiogenesis through the HIF-1α/VEGF pathway. In the DLS/c group, animal studies showed significant improvements in epidermal formation, barrier function, and epidermal hydration, accompanied by reduced inflammation. In addition, Masson's trichrome and Sirius red staining revealed that the structure and ratio of dermal collagen in DLS/c resembled that of normal skin, indicating considerable potential for scarless wound healing. INTERPRETATION: This biomimetic matrix shows promise in addressing the challenges of burn wounds and aiming for scarless repair, with benefits such as anti-infection, epidermal hydration, biological induction, and optimised topological properties. FUNDING: Shown in Acknowledgements.
Sujet(s)
Brûlures , Impression tridimensionnelle , Peau artificielle , Cicatrisation de plaie , Brûlures/traitement médicamenteux , Brûlures/métabolisme , Brûlures/anatomopathologie , Cicatrisation de plaie/effets des médicaments et des substances chimiques , Humains , Animaux , Hydrogels/composition chimique , Souris , Anti-infectieux/pharmacologie , Gélatine/composition chimique , Cicatrice/anatomopathologie , Cicatrice/métabolisme , Cicatrice/traitement médicamenteux , Lignée cellulaire , Fibroïne/composition chimique , Rats , Mâle , Modèles animaux de maladie humaineRÉSUMÉ
Tetrazine-derived fluorogenic labels are extensively studied for their potential in biological and medical imaging. Nonetheless, the fluorescence quenching mechanism in numerous precursors continues to be debated, particularly as the wavelengths extend into the red and near-infrared (NIR) regions. This challenge poses obstacles to systematically optimizing their fluorogenicity, i.e., achieving red-shifted wavelengths and improved fluorescence turn-on signals through click reactions. This paper highlights the significance of photoinduced charge centralization (PCC), a quenching mechanism observed in tetrazine-fused fluorogenic labels with integrated π-conjugations. PCC is primarily responsible for the quenching effects observed in such labels emitting in the red-to-NIR spectrum. Drawing from structure-property relationships, this study proposes two molecular design strategies that incorporate the PCC mechanism and constitutional isomerization to develop high-performance tetrazine-based labels. These strategies facilitate multiplex fluorescence imaging following click reactions, promising significant advancements in bio-orthogonal imaging techniques.
Sujet(s)
Colorants fluorescents , Colorants fluorescents/composition chimique , Composés hétéromonocycliques/composition chimique , Fluorescence , Chimie click , Imagerie optique/méthodes , Processus photochimiquesRÉSUMÉ
This multicentre, two-arm, phase 2 study aimed to explore the efficacy and safety of neoadjuvant camrelizumab plus chemotherapy or apatinib in patients with initially unresectable stage II-III non-small-cell lung cancer (NSCLC). Eligible patients regardless of PD-L1 expression received neoadjuvant camrelizumab 200 mg and platinum-doublet chemotherapy every 3 weeks (arm A) or those with PD-L1-positive tumors received neoadjuvant camrelizumab and apatinib 250 mg once daily (arm B), for 2-4 cycles, followed by surgery. The primary endpoint was major pathological response (MPR) rate. Thirty patients in arm A and 21 in arm B were enrolled. Surgery rates were 50.0% (15/30) in arm A and 42.9% (9/21) in arm B, with all patients achieving R0 resections. Of these patients, the MPR and pathological complete response rates were both 20.0% (95% CI 4.3-48.1) in arm A and were 55.6% (95% CI 21.2-86.3) and 11.1% (95% CI 0.3-48.2) in arm B, respectively. The corresponding objective response rates were 33.3% (95% CI 11.8-61.6) and 55.6% (95% CI 21.2-86.3). With a median follow-up of 22.4 months (95% CI 19.0-26.0), the median event-free survival was not reached (NR; 95% CI 13.6-NR) in arm A and 16.8 months (95% CI 8.6-NR) in arm B. Grade 3 or above treatment-related adverse events occurred in eight (26.7%) patients in arm A and three (14.3%) in arm B. Biomarker analysis showed baseline TYROBP expression was predictive of treatment response in arm B. Neoadjuvant camrelizumab plus chemotherapy or apatinib exhibits preliminary efficacy and manageable toxicity in patients with initially unresectable stage II-III NSCLC.
Sujet(s)
Anticorps monoclonaux humanisés , Protocoles de polychimiothérapie antinéoplasique , Carcinome pulmonaire non à petites cellules , Tumeurs du poumon , Traitement néoadjuvant , Pyridines , Humains , Pyridines/administration et posologie , Pyridines/usage thérapeutique , Pyridines/effets indésirables , Femelle , Mâle , Adulte d'âge moyen , Carcinome pulmonaire non à petites cellules/traitement médicamenteux , Carcinome pulmonaire non à petites cellules/anatomopathologie , Carcinome pulmonaire non à petites cellules/génétique , Tumeurs du poumon/traitement médicamenteux , Tumeurs du poumon/anatomopathologie , Anticorps monoclonaux humanisés/usage thérapeutique , Anticorps monoclonaux humanisés/administration et posologie , Sujet âgé , Protocoles de polychimiothérapie antinéoplasique/usage thérapeutique , Protocoles de polychimiothérapie antinéoplasique/effets indésirables , Protocoles de polychimiothérapie antinéoplasique/pharmacologie , Adulte , Stadification tumorale , Récepteur-2 au facteur croissance endothéliale vasculaire/génétique , Récepteur-2 au facteur croissance endothéliale vasculaire/antagonistes et inhibiteurs , Récepteur-1 de mort cellulaire programmée/antagonistes et inhibiteursRÉSUMÉ
Objectives: The study objectives were to evaluate the safety, feasibility, and risk of neurologic complications with the supraclavicular approach in the operative management of cervicothoracic-junction benign neurogenic tumors. Methods: Between January 2012 and April 2023, 115 patients who underwent surgical resection for cervicothoracic-junction benign neurogenic tumors were retrospectively enrolled. Patients were divided into 3 groups based on the surgical approach: supraclavicular alone (Supraclav-Alone), n = 16; Transthoracic-Alone (video-assisted thoracoscopic surgery/Open), n = 87; and supraclavicular combined with transthoracic (Supraclav + video-assisted thoracoscopic surgery/open), n = 12. Clinicopathologic variables and postoperative morbidity including neurologic complications were summarized among the groups. Logistic regression analysis was performed to identify predictors for long-term (>6 months) brachial plexus injuries. Results: The cohort comprised 28 patients (24.3%) who underwent surgical resection using a supraclavicular approach. The Supraclav-Alone group portended the most cephalad location of tumor, the smallest pathologic tumor size, the shortest operative time, the least blood loss, and the least postoperative pain. The incidence of surgical complications, phrenic nerve neuropraxia, recurrent laryngeal nerve neuropraxia, or Horner's syndrome was similar among the groups postoperatively. However, use of the supraclavicular-alone approach (adjusted odds ratio, 0.165; 95% CI, 0.017-0.775) was a predictor for long-term brachial plexus injury complications. Among patients who experienced brachial plexus injury complications, the proportion of patients achieving complete resolution was higher among those undergoing a supraclavicular approach group (Supraclav-Alone: 80.0% vs Supraclav + video-assisted thoracoscopic surgery/Open: 60.0% vs video-assisted thoracoscopic surgery/Open: 25.8%). Conclusions: The supraclavicular approach may be a safe and feasible strategy in the management of cervicothoracic-junction benign neurogenic tumors that does not increase surgical complications and minimizes the severity of brachial plexus injury.
RÉSUMÉ
The past few decades have witnessed encouraging progress in the development of high-performance film-based fluorescent sensors (FFSs) for detecting explosives, illicit drugs, chemical warfare agents (CWAs), and hazardous volatile organic chemicals (VOCs), among others. Several FFSs have transitioned from laboratory research to real-world applications, demonstrating their practical relevance. At the heart of FFS technology lies the sensing films, which play a crucial role in determining the analytes and the resulting signals. The selection of sensing fluorophores and the fabrication strategies employed in film construction are key factors that influence the fluorescence properties, active-layer structures, and overall sensing behaviors of these films. This review examines the progress and innovations in the research field of FFSs over the past two decades, focusing on advancements in fluorophore design and active-layer structural engineering. It underscores popular sensing fluorophore scaffolds and the dynamics of excited state processes. Additionally, it delves into six distinct categories of film fabrication technologies and strategies, providing insights into their advantages and limitations. This review further addresses important considerations such as photostability and substrate effects. Concluding with an overview of the field's challenges and prospects, it sheds light on the potential for further development in this burgeoning area.
RÉSUMÉ
The emergence of multidrug resistant (MDR) pathogens and the scarcity of new potent antibiotics and antifungals are one of the biggest threats to human health. Antimicrobial photodynamic therapy (aPDT) combines light and photosensitizers to kill drug-resistant pathogens; however, there are limited materials that can effectively ablate different classes of infective pathogens. In the present work, a new class of benzodiazole-paired materials is designed as highly potent PDT agents with broad-spectrum antimicrobial activity upon illumination with nontoxic light. The results mechanistically demonstrate that the energy transfer and electron transfer between nonphotosensitive and photosensitive benzodiazole moieties embedded within pathogen-binding peptide sequences result in increased singlet oxygen generation and enhanced phototoxicity. Chemical optimization renders PEP3 as a novel PDT agent with remarkable activity against MDR bacteria and fungi as well as pathogens at different stages of development (e.g., biofilms, spores, and fungal hyphae), which also prove effective in an ex vivo porcine model of microbial keratitis. The chemical modularity of this strategy and its general compatibility with peptide-based targeting agents will accelerate the design of highly photosensitive materials for antimicrobial PDT.
Sujet(s)
Photothérapie dynamique , Photosensibilisants , Photosensibilisants/composition chimique , Photosensibilisants/pharmacologie , Animaux , Photothérapie dynamique/méthodes , Anti-infectieux/pharmacologie , Anti-infectieux/composition chimique , Biofilms/effets des médicaments et des substances chimiques , Suidae , Kératite/traitement médicamenteux , Kératite/microbiologie , Infections de l'oeil/traitement médicamenteux , Infections de l'oeil/microbiologie , Humains , Champignons/effets des médicaments et des substances chimiques , Oxygène singulet/métabolisme , Tests de sensibilité microbienneRÉSUMÉ
Herein, we propose a simple and effective fluoride (F-) ions post-treatment method to improve the solar water splitting performance of monoclinic BiVO4 (abbreviated as BVO). The surface modification of BVO with functional F- ions not only facilitates the transfer and separation efficiency of carriers at the electrode/electrolyte interface but also promotes the adsorption and activation of water, resulting in a photocurrent of 3.2â mA/cm2 at a bias voltage of 1.2 VRHE. Furthermore, the transfer and separation of carriers in the bulk and on the surface are further regulated by the oxygen vacancies induced by F- ions, thereby enhancing the PEC water splitting performance of BVO. Notably, the experimental findings demonstrate that the introduce of F- ions into the KBi electrolyte enhances the photo-charging process of BVO. Specifically, at a bias voltage of 0.6 VRHE, the BVO-0.12F sample exhibits a stable photocurrent of 1.2â mA/cm2, which is twice as high as that of the initial BVO sample. Remarkably, our study unveils that the addition of F- ions into the KBi electrolyte solution plays a pivotal role in facilitating the separation of charge carriers and promoting interfacial charge transport. Consequently, this further leads to a substantial enhancement in the solar water splitting performance for BVO-0.12F photoanode.
RÉSUMÉ
Background: Data regarding the safety and efficacy of delayed completion lobectomy (CL) following sublobar resections remain scant. We evaluated the technical difficulty and short-term outcomes of CL occurring at least 3 months following the anatomical segmentectomy or wedge resection. Methods: Consecutive non-small cell lung cancer (NSCLC) patients who underwent a second resection within the same lobe at least 3 months after their initial resection from January 2013 to December 2019 at the Shanghai Pulmonary Hospital were retrospectively included. The patients were divided into a segmentectomy group (SG group) and a wedge resection group (WR group) based on their initial resection strategy. Baseline characteristics and short-term outcomes after CL between the two groups were compared. Results: Twenty-five patients undergoing CL were included, nine in the SG group and 16 in the WR group. No deaths occurred within 30 days postoperatively, and the rate of overall postoperative complications was 28.0% (7/25). Statistically significant differences were found in rates of postoperative complications between the two groups (SG: 55.6% vs. WR: 12.5%, P=0.03) and in the use of bronchoplasty or angioplasty during the CL (SG: 33.3% vs. WR: 0.0%, P=0.04). After CL, no significant differences were found in 5-year recurrence-free survival (RFS) (WR: 66.7% vs. SG: 61.0%, P=0.31) or overall survival (OS) (WR: 93.8% vs. SG: 66.7%, P=0.06) between two groups. Conclusions: Delayed CL occurring over 3 months after sublobar resection is a safe and effective procedure, with no deaths occurring within 30 days postoperatively. As compared to a segmentectomy at the time of the index operation, a wedge resection may portend less morbidity, with a decreased risk of needing adjunctive bronchoplasty or angioplasty procedures during CL. After CL, 5-year RFS and OS were comparable between WR and SG groups.
RÉSUMÉ
Vibrio vulnificus infection caused by contaminated aquatic products and seawater can lead to severe disease and high mortality. The development of a rapid and sensitive detection method for Vibrio vulnificus is vital to effectively prevent infection in advance. In this study, CeO2@PtRu with high peroxidase activity was used to construct a colorimetric immunoassay for Vibrio vulnificus detection by conjugating polyclonal antibodies via the biotin-streptavidin system. The developed colorimetric biosensor for Vibrio vulnificus demonstrated rapid operability and good sensitivity with a detection range from 104 CFU/mL to 109 CFU/mL, and the limit of detection (LOD) is 193 CFU/mL. Moreover, the colorimetric biosensor showed excellent specificity and good recoveries from 98.70% to 102.10% with RSD < 7.45% for spiked real samples. This novel CeO2@PtRu-based colorimetric biosensor has great application potential for the sensitive detection of Vibrio vulnificus in seafood.
Sujet(s)
Techniques de biocapteur , Cérium , Colorimétrie , Produits de la mer , Vibrio vulnificus , Vibrio vulnificus/isolement et purification , Techniques de biocapteur/instrumentation , Produits de la mer/microbiologie , Produits de la mer/analyse , Cérium/composition chimique , Myeloperoxidase/métabolisme , Myeloperoxidase/composition chimique , Limite de détection , Contamination des aliments/analyse , AnimauxRÉSUMÉ
Photodynamic therapy (PDT) provides an alternative approach to targeted cancer treatment, but the therapeutic mechanism of advanced nanodrugs applied to live cells and tissue is still not well understood. Herein, we employ the hybrid hyperspectral stimulated Raman scattering (SRS) and transient absorption (TA) microscopy developed for real-time in vivo visualization of the dynamic interplay between the unique photoswichable lanthanide-doped upconversion nanoparticle-conjugated rose bengal and triphenylphosphonium (LD-UCNP@CS-Rb-TPP) probe synthesized and live cancer cells. The Langmuir pharmacokinetic model associated with SRS/TA imaging is built to quantitatively track the uptakes and pharmacokinetics of LD-UCNP@CS-Rb-TPP within cancer cells. Rapid SRS/TA imaging quantifies the endocytic internalization rates of the LD-UCNP@CS-Rb-TPP probe in individual HeLa cells, and the translocation of LD-UCNP@CS-Rb-TPP from mitochondria to cell nuclei monitored during PDT can be associated with mitochondria fragmentations and the increased nuclear membrane permeability, cascading the dual organelle ablations in cancer cells. The real-time SRS spectral changes of cellular components (e.g., proteins, lipids, and DNA) observed reflect the PDT-induced oxidative damage and the dose-dependent death pattern within a single live cancer cell, thereby facilitating the real-time screening of optimal light dose and illumination duration controls in PDT. This study provides new insights into the further understanding of drug delivery and therapeutic mechanisms of photoswitchable LD-UCNP nanomedicine in live cancer cells, which are critical in the optimization of nanodrug formulations and development of precision cancer treatment in PDT.
Sujet(s)
Nanoparticules , Photothérapie dynamique , Photosensibilisants , Humains , Cellules HeLa , Nanoparticules/composition chimique , Photosensibilisants/composition chimique , Photosensibilisants/pharmacologie , Analyse spectrale Raman , Rose de Bengale/composition chimique , Rose de Bengale/pharmacologie , Microscopie optique non linéaire , Relation dose-effet des médicamentsRÉSUMÉ
A series of conjugated polymers bearing thiophene-based donors and pyromellitic diimide (PMDI) acceptor were prepared, and their electrochromic (EC) properties were studied via using fabricated thin-film EC devices. It was observed that structurally regular alternating polymers with fewer (1 and 2) thiophene donors do not exhibit any EC properties while increasing the number of donors eventually led to the emergence of orange-red-to-green colour switching. On this basis, two more random co-polymers containing higher donor-to-acceptor ratios were synthesized to further improve EC switching properties. The two polymers, which bear a PMDI-to-thiophene ratio of ca. 1 : 7 and 1 : 8, revealed orange red-to-blue colour switching and generally improved optical contrasts and switching speeds in both the visible and near infra-red (NIR) region. In addition, the subtle modulation of polymer colour and hue via variation of the number of thiophene donors was evident through colorimetric study. This work therefore demonstrates the potential and possibility of using the PMDI acceptor unit to construct EC-active conjugated polymers, and considerations for future tuning of colour and switching performances.