Non-linear association of atherogenic index of plasma with bone mineral density a cross-sectional study.

INTRODUCTION: Although there has been abundant evidence of the association between dyslipidemia as a single factor and osteoporosis, the non-linear relationship between osteoporosis and the Atherogenic Index of Plasma (AIP) has not yet been thoroughly investigated. This study aimed to investigate the complex relationship between AIP and bone mineral density (BMD) to elucidate their interrelationship. METHODS: An analysis of 2007-2018 National Health and Nutrition Survey (NHANES) data was conducted for this study. The study enrolled 5,019 participants. Logarithmically multiplying triglycerides and high-density lipoprotein cholesterol yields the AIP (base 10). The measured variables consisted of BMD in the total femur (TF), femoral neck (FN), and lumbar spine (LS). The association between AIP and BMD was examined using a range of statistical models, such as weighted multivariable logistic regression, generalized additive model, etc. RESULTS: It was found that AIP was positively associated with BMD after adjusting for age, gender, race, socioeconomic status, degree of education, income, Consuming alcoholic beverages, osteoporosis status (Yes or No), ALT, AST, serum creatinine, and total calcium levels. Further studies supported the association link between elevated BMD and AIP. Furthermore, compared to men, females had a higher positive connection between AIP and BMD. In general, there was a curve in the reverse L-shape seen, with a point of change around 0.877, indicating a relationship between AIP and TF BMD. Moreover, a curve exhibiting an L-formed pattern, with a point of inflection at around 0.702, was seen between AIP and FN BMD. In addition, a J-shaped curve was seen, with a point of inflection at 0.092, which demonstrates the association between AIP and LS BMD. CONCLUSION: The AIP and TF BMD curves resemble inverted L shapes, as do the AIP and FN BMD curves. The relationship between AIP and LS BMD was further demonstrated by a J-shaped curve. The results indicate a possible association between AIP and bone mineral density, which should be explored in more detail.

Robust Thermal Transport across the Surface-Active Bonding SiC-on-SiC.

Surface-active bonding (SAB) is a promising technique for semiconductors directly bonding. However, the interlayer of the bonding interface and the reduced layer thickness may affect thermal transport. In this study, the temperature-dependent cross-plane thermal conductivity of 4H-SiC thin films and the effective thermal boundary resistance (TBReff) of the bonding SiC-on-SiC are measured by the multiple-probe wavelength nanosecond transient thermoreflectance (MW-TTR). The measured temperature-dependent cross-plane thermal conductivity of the 4H-SiC thin film exhibits good quantitative agreement with calculation by density functional theory (DFT) including higher-order four-phonon (4ph) scattering, especially at high temperatures (>400 K). The theoretical calculations indicate the non-negligible importance of 4ph scattering in 4H-SiC high-temperature applications, due to the significantly increasing 4ph scattering rate at increasing temperature and strong temperature dependence of 4ph scattering. The measured nonzero but small TBReff (2.33 + 0.43/-1.15 m2 K/GW) at the SiC-SiC interface is analyzed with molecular dynamics (MD) simulation, indicating that a strong bonding interface with an extremely thin interlayer is formed by the SAB process. Two-dimensional finite element simulations of the experimental equivalent structures are further investigated, and the significant effects (at least 19 °C) of TBReff on the maximum temperature (Tmax) are confirmed. This study provides insight into the fundamental phonon transport and interface thermal transport mechanism in SAB SiC-on-SiC and paves the way for improved 4H-SiC efficient device manufacturing and thermal management.

Emerging trends in the blood spinal-cord barrier: A bibliometric analysis.

BACKGROUND: The blood-spinal cord barrier (BSCB) is a unique protective barrier located between the circulatory system and the central nervous system. BSCB plays a vital role in various diseases. However, there is little systematic research and recording in this field by bibliometrics analysis. We aim to visualize this field through bibliometrics to analyze the hotspots and trends of BSCB and in order to facilitate an understanding of future developments in basic and clinical research. METHODS: To conduct a bibliometric study of original publications and their references, the keywords Blood Spinal-Cord Barrier and BSCB are searched and filtered from the Web of Science database (2000-2022), focusing on citations, authors, journals, and countries/regions. Additionally, clustering of the references and co-citation analysis was completed, including a total of 1926 articles and comments. RESULTS: From the results, 193 authors were identified, among which Sharma Hs played a key role. As far as the analysis result of the clustering of the references is concerned, the most common type in cluster analysis is spinal cord injury (SCI) which is a current and developing research field. The keywords are also the specific content under these clusters. The most influential organization is Univ Calif San Francisco, and "Proceedings of The National Academy of Sciences of The United States of America" magazine is the most cited magazine. CONCLUSION SUBSECTIONS: The research on BSCB is booming focusing mainly on "BSCB in SCI" including "activation," "pathway," and "drug delivery" which is also the trend of future research.

High-Fidelity, Low-Hysteresis Bionic Flexible Strain Sensors for Soft Machines.

Stretchable flexible strain sensors based on conductive elastomers are rapidly emerging as a highly promising candidate for popular wearable flexible electronic and soft-mechanical sensing devices. However, due to the intrinsic limitations of low fidelity and high hysteresis, existing flexible strain sensors are unable to exploit their full application potential. Herein, a design strategy for a successive three-dimensional crack conductive network is proposed to cope with the uncoordinated variation of the output resistance signal arising from the conductive elastomer. The electrical characteristics of the sensor are dominated by the successive crack conductive network through a greater resistance variation and a concise sensing mechanism. As a result, the developed elastomer bionic strain sensors exhibit excellent sensing performance in terms of a smaller overshoot response, a lower hysteresis (∼2.9%), and an ultralow detection limit (0.00179%). What's more, the proposed strategy is universal and applicable to many conductive elastomers with different conductive fillers (including 0-D, 1-D, and 2-D conductive fillers). This approach improves the sensing signal accuracy and reliability of conductive elastomer strain sensors and holds promising potential for various applications in the fields of e-skin and soft robotic systems.

Running Gait and Control of Quadruped Robot Based on SLIP Model.

Legged robots have shown great adaptability to various environments. However, conventional walking gaits are insufficient to meet the motion requirements of robots. Therefore, achieving high-speed running for legged robots has become a significant research topic. In this paper, based on the Spring-Loaded Inverted Pendulum (SLIP) model and the optimized Double leg-Spring-Loaded Inverted Pendulum (D-SLIP) model, the running control strategies for the double flying phase Bound gait and the Rotatory gallop gait of quadruped robots are designed. First, the dynamics of the double flying phase Bound gait and Rotatory gallop gait are analyzed. Then, based on the "three-way" control idea of the SLIP model, the running control strategy for the double flying phase Bound gait is designed. Subsequently, the SLIP model is optimized to derive the D-SLIP model with two touchdown legs, and its dynamic characteristics are analyzed. And the D-SLIP model is applied to the running control strategy of the Rotatory gallop gait. Furthermore, joint simulation verification is conducted using Adams virtual prototyping and MATLAB/Simulink control systems for the designed control strategies. Finally, experimental verification is performed for the double flying phase Bound gait running control strategy. The experimental results demonstrate that the quadruped robot can achieve high-speed and stable running.

Phase-Dependent Phonon Heat Transport in Nanoscale Gallium Oxide Thin Films.

Different phases of Ga2O3 have been regarded as superior platforms for making new-generation high-performance electronic devices. However, understanding of thermal transport in different phases of nanoscale Ga2O3 thin-films remains challenging, owing to the lack of phonon transport models and systematic experimental investigations. Here, thermal conductivity (TC) and thermal boundary conductance (TBC) of the ( 1 ¯ 010 ) $( {\bar 1010} )$ α-, ( 2 ¯ 01 ) $( {\bar 201} )\;$ ß-, and (001) κ-Ga2O3 thin films on sapphire are investigated. At ≈80 nm, the measured TC of α (8.8 W m-1 K-1) is ≈1.8 times and ≈3.0 times larger than that of ß and κ, respectively, consistent with model based on density functional theory (DFT), whereas the model reveals a similar TC for the bulk α- and ß-Ga2O3. The observed phase- and size-dependence of TC is discussed thoroughly with phonon transport properties such as phonon mean free path and group velocity. The measured TBC at Ga2O3/sapphire interface is analyzed with diffuse mismatch model using DFT-derived full phonon dispersion relation. Phonon spectral distribution of density of states, transmission coefficients, and group velocity are studied to understand the phase-dependence of TBC. This study provides insight into the fundamental phonon transport mechanism in Ga2O3 thin films and paves the way for improved thermal management of high-power Ga2O3-based devices.

Creep Monitoring of Submersible Observation Windows Using Mueller Matrix Imaging.

Safety of the observation window is one of the core concerns for manned submersibles. When subjected to underwater static pressure, extrusion and creep deformation always occur in the observation window, which can pose a threat to both safety and optical performance. To assess the deformation, real-time and non-contact monitoring methods are necessary. In this study, a conceptual setup based on the waveplate rotation and dual-DoFP (division of focal-plane polarimeter) polarization camera is built for the observation window's creep monitoring by measuring the Mueller matrix images of the samples under different pressures and durations. Then, a series of characteristic parameters, such as t1, R, r, R', are extracted from the Muller matrix images by Mueller matrix transformation (MMT), Mueller matrix polar decomposition (MMPD), correlation analysis and phase unwrapping method. The results demonstrate that these parameters can effectively describe the observation window's creep at different pressure levels which are simulated by finite element analysis. Additionally, more characterization parameters, such as ψ, A and D, are given from the Mueller matrix images and discussed to illustrate the method's potential for further applications and investigations. Ultimately, future devices based on this method could serve as a valuable tool for real-time and non-contact creep monitoring of the submersible observation windows.

Bionic Design and Optimization on the Flow Channel of a Legged Robot Joint Hydraulic Drive Unit Based on Additive Manufacturing.

The joint hydraulic drive unit (HDU) serves as a pivotal element in enabling the high-performance movements of legged robots. Functioning as the conduit linking the oil source and the actuator, the hydraulic flow channel significantly impacts actuator performance. Hence, optimizing the HDU flow channel becomes imperative, enhancing not only HDU efficiency but also the overall system performance. This paper introduces a novel approach by aligning the hydraulic flow channel of the joint HDU with the arteriovenous layout of the cardiac vascular system, departing from the conventional machining flow channel model. Through simulations determining the optimal range of the vascular branch radius and angle, this study guides the design optimization of the joint HDU flow channel. With the primary optimization goal of reducing pressure loss, the study compares simulation outcomes of various flow channel models-linear, variable excessive radius, and the multidimensional Bessel curve-tailored to suit the arrangement specifics of the joint HDU. Further validating these designs, the flow channels are fabricated using additive manufacturing for experimental verification. The integration of simulation analyses and pressure loss testing reveals a remarkable reduction of over 40% in pressure loss for the bionic flow channel compared to the conventional machining form. This empirical evidence strongly substantiates the bionic flow channel's superior efficacy in pressure loss reduction. The findings presented herein offer valuable insights for the development of low-loss flow channels in joint HDUs, thereby presenting a new avenue for designing energy-efficient, high power-to-weight ratio legged robots.

Preparation of Cellulose-Based Flocculant and Its Application in the Enrichment of Vitamin K2 in Fermentation Supernatant.

Nutritional food supplements and pharmaceutical products produced with vitamin K2 as raw materials a very promising market in the global scope. The main production method of vitamin K2 is microbial fermentation, but approximately 50% of vitamin K2 synthesized by the main production strain Bacillus subtilis natto exists in extracellular form, which is not easy to separate and extract. In order to solve this problem, in this study, we synthesized a novel cellulose flocculant, MCC-g-LMA, by grafting reaction using microcrystalline cellulose (MCC) and lauryl methacrylate (LMA) as monomers, and ammonium persulfate as an initiator to flocculate VK2 from the fermentation supernatant. The flocculant was characterized by Fourier transform infrared spectroscopy (FTIR), elemental analysis, and scanning electron microscopy (SEM), and the grafting reaction was successful. When the flocculant dosage was 48.0 mg/L and pH was 5.0, the flocculation rate of the MCC-g-LMA on the fermentation supernatant reached 85.3%, and the enrichment rate of VK2 reached 90.0%. Furthermore, we explored the flocculation mechanism of VK2 by the MCC-g-LMA and speculated that the flocculation mechanism mainly included adsorption bridging, hydrophobic association and net trapping and sweep effect. In this study, the extraction method for trace high-value biological products in the fermentation supernatant was improved, which provided a method and theoretical basis for the efficient separation and purification of VK2 and other terpenoids.

Current curative expenditure of non-communicable diseases changed in Dalian, China from 2017 to 2019: a study based on 'System of Health Accounts 2011'.

OBJECTIVES: To analyse the current curative expenditure (CCE) of NCDs in China from 2017 to 2019. DESIGN: A cross-sectional study. Medical institutions were collected by multistage stratified random sampling from 2017 to 2019. SETTING: Dalian, China PARTICIPANTS: 408 institutions and 8 104 233 valid items were included in the study. NCDs patients were selected according to International Classification of Diseases-10. PRIMARY AND SECONDARY OUTCOME MEASURES: CCE for NCDs was measured based on the System of Health Accounts 2011. Influenced factors were analysed by linear regression. All analyses and calculations were performed by STATA V.15.0. RESULTS: The CCE of NCDs was ¥14.929 billion in 2017, ¥16.377 billion in 2018 and ¥18.055 billion in 2019, which accounted for more than 65% of total expenditure spent each year. More than 60% came from public financing. The proportion of family health financing continued to decline, reaching 31.16% in 2019. The expenditures were mainly in general hospitals, above 70%. Elderly patients account for the majority. Diseases of the circulatory system, diseases of the digestive system and neoplasms were the main NCDs. Year, age, gender, length of stay, surgery, insurance and institution level affected hospitalisation expenses. CONCLUSIONS: NCDs are the main CCE of diseases in China, and their resources are not allocated reasonably. To reduce the CCE of NCDs, the government needs to optimise resource allocation and rationalise institutional flows and functions.

Engineering microbial consortia of Elizabethkingia meningoseptica and Escherichia coli strains for the biosynthesis of vitamin K2.

BACKGROUND: The study and application of microbial consortia are topics of interest in the fields of metabolic engineering and synthetic biology. In this study, we report the design and optimisation of Elizabethkingia meningoseptica and Escherichia coli co-culture, which bypass certain limitations found during the molecular modification of E. meningoseptica, such as resistance to many antibiotics and fewer available molecular tools. RESULTS: The octaprenyl pyrophosphate synthase from E. meningoseptica sp. F2 (EmOPPS) was expressed, purified, and identified in the present study. Then, owing to the low vitamin K2 production by E. coli or E. meningoseptica sp. F2 monoculture, we introduced the E. meningoseptica and E. coli co-culture strategy to improve vitamin K2 biosynthesis. We achieved production titres of 32 mg/L by introducing vitamin K2 synthesis-related genes from E. meningoseptica sp. F2 into E. coli, which were approximately three-fold more than the titre achieved with E. meningoseptica sp. F2 monoculture. This study establishes a foundation for further engineering of MK-n (n = 4, 5, 6, 7, 8) in a co-cultivation system of E. meningoseptica and E. coli. Finally, we analysed the surface morphology, esterase activity, and membrane permeability of these microbial consortia using scanning electron microscopy, confocal laser scanning microscopy, and flow cytometry, respectively. The results showed that the co-cultured bacteria were closely linked and that lipase activity and membrane permeability improved, which may be conducive to the exchange of substances between bacteria. CONCLUSIONS: Our results demonstrated that co-culture engineering can be a useful method in the broad field of metabolic engineering of strains with restricted molecular modifications.

Stress Detection of Conical Frustum Windows in Submersibles Based on Polarization Imaging.

Stress detection of the conical frustum window is a very important issue to ensure the safety of deep manned submersibles. In this paper, we propose a method based on polarization imaging to evaluate the stress accumulation and recovery in the conical frustum window. An experimental setup of Mueller matrix polarimetry is built, and the samples are made by referring to the typical conical frustum windows in submersibles. By pressurizing different pressures on the samples, we can find the changes of their Mueller matrix images and further derived polarization parameters. The results show that the polarization parameters can characterize the stress transfer process and the elastic-plastic transformation process of the window under different pressurization pressures. We also use a two-layered wave plate model to simulate the stress distribution in the window, which reveals different performances of the former and latter layers of the window under pressurization. Finally, we use a finite element model to simulate and understand some of the above experimental results. This proposed method is expected to provide new possibilities for monitoring the window stress and further ensure the safety of deep manned submersibles.

Ultrasensitive, Highly Stable, and Flexible Strain Sensor Inspired by Nature.

For advanced flexible strain sensors, it is not difficult to achieve high sensitivity only. However, integrating high sensitivity, high stability, and high durability into one sensor still remains a great challenge. Fortunately, natural creatures with diversified excellent performances have given us a lot of ready-made solutions. Here, scorpion and spiderweb are selected as coupling bionic prototypes, which are famous for their ultrasensitive sensing capacity and excellent structural durability, respectively. Based on that, a bioinspired strain sensor is successfully fabricated. The results demonstrate that the bioinspired strain sensor has a sensitivity of 940.5 in the strain range of 0-1.5% and a sensitivity of 2742.3 between 1.5 and 2.5%. Meantime, this sensor with a spiderweb-like reticular structure has a great improvement in stability and durability. Specifically, the sensor exhibits excellent stability during bending and stretching cycles over 80,000 times. Moreover, the response time and recovery time of the sensor are 169 and 195 ms, respectively. Besides, the sensor also has functions such as vibrating frequency identification due to its low hysteresis. Based on the excellent performance, the sensor can be applied to monitor human body motions serving as wearable electronics.

CCNE1 Promotes Progression and is Associated with Poor Prognosis in Lung Adenocarcinoma.

BACKGROUND: Mounting evidence has shown that Cyclin E1 (CCNE1) facilitates various carcinoma progression, but its function in lung adenocarcinoma (LUAD) remains unclear. OBJECTIVE: Our study aims to explore the significance of CCNE1 in clinical progression and study its biological functions in LUAD. METHODS: CCNE1 expressions in LUAD specimens and cells were detected through quantitative realtime polymerase chain reaction (qRT-RCR) and western blot. An immunohistochemistry technique was used to detect CCNE1 expression to explore its association with clinical parameters. The LUAD cells with stable knockdown of CCNE1 were constructed by small interfering RNA. The effect of CCNE1 on LUAD cells proliferation and apoptosis was evaluated through Cell Counting Kit-8 (CCK-8), colony formation, and Annexin V/propidium iodide (AV-PI) assays, respectively. The cell migration and invasion were evaluated by Wound-healing and Transwell assays, respectively. The xenograft and lung metastasis mouse models were introduced to analyze how CCNE1 knockdown affects tumor growth and tumor metastasis. RESULTS: CCNE1 expression was upregulated in LUAD tissue and cells. CCNE1 knockdown inhibited LUAD cellular malignant behavior in vitro and reduced tumor growth and metastasis in vivo. High expression of CCNE1 was correlated with big tumor size, cancer stage, lymph node metastasis, and poor prognosis. CONCLUSION: CCNE1 overexpression promotes LUAD growth, metastasis, and forebode poor prognosis: it can serve as a new prognostic marker of LUAD.

A Selective-Response Bioinspired Strain Sensor Using Viscoelastic Material as Middle Layer.

Flexible strain sensors have an irreplaceable role in critical and emerging fields, such as electronic skins, flexible robots, and prosthetics. Although numerous efforts have been made to improve sensor sensitivity to meet specific application scenarios, the signal-to-noise ratio (SNR) is an extremely critical and non-negligible indicator, which takes into account higher sensitivity, meaning that they can also detect the noise signals with high sensitivity. Coincidentally, scorpions with ultrasensitive vibration sensilla also face such a dilemma. Here, it is found that the scorpion ingeniously uses the viscoelastic material in front of its slit sensilla to realize efficient preprocessing of the signal. Its mechanism is that the loss factor of materials changes with frequency, affecting energy storage and transmission. Inspired by this ingenious strategy, a bioinspired strain sensor insensitive to a low strain rate was designed using a two-step template transfer method. As a result, its relative change in resistance reached 110% under the same strain (0.3197%) but with different strain rates (0.1 Hz and ∼20 Hz). The noncontact vibration experiments also show different responses to low-frequency vibration and high-frequency impact. Moreover, it can also be used as a typical flexible strain sensor. Under the tensile state, it has a gauge factor (GF) as high as 4596 upon 0.6% strain, and the response time is 140 ms. Therefore, it is expected that this strain sensor will be used in many important ultraprecision measurement fields, especially when the measured signal is small.

Transcriptome-Wide Analysis and Functional Verification of RING-Type Ubiquitin Ligase Involved in Tea Plant Stress Resistance.

The ubiquitin/26S proteasome pathway is a critical protein-degradation pathway in plant growth and development as well as in nearly all biological and abiotic stress processes. Although as a member of the ubiquitin/26S proteasome pathway, the E3 ubiquitin ligase family has been shown to be essential for the selective degradation of downstream target proteins, it has been rarely reported in tea plants (Camellia sinensis). In this study, through database searches and extensive manual deduplication, 335 RING finger family proteins were selected from the Tea Plant Information Archive. These proteins were divided into six categories by the difference of RING finger domain: RING-H2, RING-HCa, RING-HCb, RING-C2, RING-v, and RING-G. Stress-induced differential gene expression analysis showed that 53 proteins in RING finger family can respond to selected exogenous stress. In vitro ubiquitination assays indicated that TEA031033, which was named CsMIEL1, exhibited the activity of E3 ubiquitin ligases. CsMIEL1-overexpressing transgenic Arabidopsis thaliana seedlings were resistant to some exogenous abiotic stresses, such as salt and drought stress but sensitive to exogenous methyl jasmonate treatment. Furthermore, CsMIEL1 reduced the accumulation of anthocyanin in transgenic plants in response to low temperature treatment. The results of this article provide basic date for studying the role of ubiquitin/26S proteasome pathway in tea plants response to stresses.

Modulation of 1 MeV electron irradiation on ultraviolet response in MoS2FET.

The material, electrical and ultraviolet optoelectronic properties of few layers bottom molybdenum disulfide (MoS2) field effect transistors (FETs) device was investigated before and after 1 MeV electron irradiation. Due to the participation of SiO2in conduction, we discovered novel photoelectric properties and a relatively long photogenerated carrier lifetime (several tens of seconds). Electron irradiation causes lattice distortion, the decrease of carrier mobility, and the increase of interface state. It leads to the degradation of output characteristics, transfer characteristics and photocurrent of the MoS2FET.

Li-ion storage properties of two-dimensional titanium-carbide synthesized via fast one-pot method in air atmosphere.

Structural bidimensional transition-metal carbides and/or nitrides (MXenes) have drawn the attention of the material science research community thanks to their unique physical-chemical properties. However, a facile and cost-effective synthesis of MXenes has not yet been reported. Here, using elemental precursors, we report a method for MXene synthesis via titanium aluminium carbide formation and subsequent in situ etching in one molten salt pot. The molten salts act as the reaction medium and prevent the oxidation of the reactants during the high-temperature synthesis process, thus enabling the synthesis of MXenes in an air environment without using inert gas protection. Cl-terminated Ti3C2Tx and Ti2CTx MXenes are prepared using this one-pot synthetic method, where the in situ etching step at 700 °C requires only approximately 10 mins. Furthermore, when used as an active material for nonaqueous Li-ion storage in a half-cell configuration, the obtained Ti2CTx MXene exhibits lithiation capacity values of approximately 280 mAh g-1 and 160 mAh g-1 at specific currents of 0.1 A g-1 and 2 A g-1, respectively.

Electrochemical Lithium Storage Performance of Molten Salt Derived V2SnC MAX Phase.

MAX phases are gaining attention as precursors of two-dimensional MXenes that are intensively pursued in applications for electrochemical energy storage. Here, we report the preparation of V2SnC MAX phase by the molten salt method. V2SnC is investigated as a lithium storage anode, showing a high gravimetric capacity of 490 mAh g-1 and volumetric capacity of 570 mAh cm-3 as well as superior rate performance of 95 mAh g-1 (110 mAh cm-3) at 50 C, surpassing the ever-reported performance of MAX phase anodes. Supported by operando X-ray diffraction and density functional theory, a charge storage mechanism with dual redox reaction is proposed with a Sn-Li (de)alloying reaction that occurs at the edge sites of V2SnC particles where Sn atoms are exposed to the electrolyte followed by a redox reaction that occurs at V2C layers with Li. This study offers promise of using MAX phases with M-site and A-site elements that are redox active as high-rate lithium storage materials.

Limonin Alleviates Non-alcoholic Fatty Liver Disease by Reducing Lipid Accumulation, Suppressing Inflammation and Oxidative Stress.

Non-alcoholic fatty liver disease (NAFLD) is the most common cause of chronic liver disease and continues to rise in the worldwide. Limonin is a triterpenoid compound widely found in the fruits of citrus plants with a wide range of pharmacological effects, including anti-cancer, anti-inflammation, anti-viral, anti-oxidation and liver protection properties. However, the potential molecular mechanism of limonin on NAFLD in zebrafish remains unknown. In this study, zebrafish larvae were exposed to thioacetamide to establish an NAFLD model and the larvae were treated with limonin for 72 h simultaneously. The human liver cell line was stimulated with lipid mixture and meanwhile incubated with limonin for 24 h. The results showed that Limonin significantly reduced the accumulation of lipid droplets in the liver and down-regulated the levels of lipogenic transcription factors FASN and SREBP1 in NAFLD. Limonin suppressed macrophages infiltration and the down-regulated the relative expression levels of the pro-inflammatory factors IL-6, IL-1ß and TNF-α secreted by macrophages. Besides, limonin could reversed the reduction of glutathione and the accumulation of reactive oxygen species through up-regulating NRF2/HO-1 signaling pathway in the liver. In conclusion, this study revealed that limonin has a protective effect on NAFLD due to its resistance to lipid deposition as well as antioxidant and anti-inflammatory actions.