RÉSUMÉ
Nuclear magnetic resonance (NMR) is a powerful technique with applications ranging from small molecule structure elucidation to metabolomics studies of living organisms. Typically, solution-state NMR requires a homogeneous liquid, and the whole sample is analyzed as a single entity. While adequate for homogeneous samples, such an approach is limited if the composition varies as would be the case in samples that are naturally heterogeneous or layered. In complex samples such as living organisms, magnetic susceptibility distortions lead to broad 1H line shapes, and thus, the additional spectral dispersion afforded by 2D heteronuclear experiments is often required for metabolite discrimination. Here, a novel, slice-selective 2D, 1H-13C heteronuclear single quantum coherence (HSQC) sequence was developed that exclusively employs shaped pulses such that only spins in the desired volume are perturbed. In turn, this permits multiple volumes in the tube to be studied during a single relaxation delay, increasing sensitivity and throughput. The approach is first demonstrated on standards and then used to isolate specific sample/sensor elements from a microcoil array and finally study slices within a living earthworm, allowing metabolite changes to be discerned with feeding. Overall, slice-selective NMR is demonstrated to have significant potential for the study of layered and other inhomogeneous samples of varying complexity. In particular, its ability to select subelements is an important step toward developing microcoil receive-only arrays to study environmental toxicity in tiny eggs, cells, and neonates, whereas localization in larger living species could help better correlate toxin-induced biochemical responses to the physical localities or organs involved.
Sujet(s)
Oeufs , Oligochaeta , Humains , Nouveau-né , Animaux , Résonance magnétique nucléaire biomoléculaire , Produits dangereux , MétabolomiqueRÉSUMÉ
With sensitivity being the Achilles' heel of nuclear magnetic resonance (NMR), the superior mass sensitivity offered by micro-coils can be an excellent choice for tiny, mass limited samples such as eggs and small organisms. Recently, complementary metal oxide semiconductor (CMOS)-based micro-coil transceivers have been reported and demonstrate excellent mass sensitivity. However, the ability of broadband CMOS micro-coils to study heteronuclei has yet to be investigated, and here their potential is explored within the lens of environmental research. Eleven nuclei including 7Li, 19F, 31P and, 205Tl were studied and detection limits in the low to mid picomole range were found for an extended experiment. Further, two environmentally relevant samples (a sprouting broccoli seed and a D. magna egg) were successfully studied using the CMOS micro-coil system. 13C NMR was used to help resolve broad signals in the 1H spectrum of the 13C enriched broccoli seed, and steady state free precession was used to improve the signal-to-noise ratio by a factor of six. 19F NMR was used to track fluorinated contaminants in a single D. magna egg, showing potential for studying egg-pollutant interactions. Overall, CMOS micro-coil NMR demonstrates significant promise in environmental research, especially when the future potential to scale to multiple coil arrays (greatly improving throughput) is considered.
Sujet(s)
Polluants environnementaux , Fluor , Spectroscopie par résonance magnétique , Oxydes , Semiconducteurs , Spectroscopie par résonance magnétique/méthodes , Brassica/composition chimique , Graines/composition chimique , Daphnia magna , Animaux , Polluants environnementaux/analyseRÉSUMÉ
Thermal stability is a crucial property of materials, especially when they have a wide range of thermally sensitive applications. Cellulose nanomaterials (CNMs) extracted from cellulosic biomass have garnered significant attention due to their abundance, biodegradability, sustainability, production scalability, and industrial versatility. To explore the correlation between the structure, chemistry, and morphology of CNMs and their thermal stability, we present a comprehensive literature review. We identify five major factors affecting CNMs' thermal stability, namely type, source, reaction conditions, post-treatment, and drying method, and analyze their impact on CNMs' thermal stability using several case studies from the literature. Using multiple linear least-squares regression (MLR), we establish a quantitative relationship between thermal stability and seven variables: crystallinity index of the source, dissociation constant of the reactant used, reactant concentration, reaction temperature, reaction time, evaporation rate, and post-treatment presence. By understanding these interdependencies, our statistical analysis enables the design of CNMs with predictable thermal properties and identification of optimal conditions for achieving high thermal stability. The results of our study provide crucial insights that can guide the development of CNMs with enhanced thermal stability for use in a variety of industrial applications.
RÉSUMÉ
Chemical characterization of complex mixtures by Nuclear Magnetic Resonance (NMR) spectroscopy is challenging due to a high degree of spectral overlap and inherently low sensitivity. Therefore, NMR experiments that reduce overlap and increase signal intensity hold immense potential for the analysis of mixtures such as biological and environmental media. Here, we introduce a 13C version of DREAMTIME (Designed Refocused Excitation And Mixing for Targets In Vivo and Mixture Elucidation) NMR, which, when analyzing 13C-enriched materials, allows the user to selectively detect only the compound(s) of interest and remove all other peaks in a 13C spectrum. Selected peaks can additionally be "focused" into sharp "spikes" to increase sensitivity. 13C-DREAMTIME is first demonstrated at high field strength (500 MHz) with simultaneous selection of eight amino acids in a 13C-enriched cell free amino acid mixture and of six metabolites in an extract of 13C-enriched green algae and demonstrated at low field strength (80 MHz) with a standard solution of 13C-d-glucose and 13C-l-phenylalanine. 13C-DREAMTIME is then applied at high-field to analyze metabolic changes in 13C-enrichedDaphnia magna after exposure to polystyrene "microplastics," as well as at low-field to track fermentation of 13C-d-glucose using wine yeast. Ultimately, 13C-DREAMTIME reduces spectral overlap as only selected compounds are recorded, resulting in the detection of analyte peaks that may otherwise not have been discernable. In combination with focusing, up to a 6-fold increase in signal intensity can be obtained for a given peak. 13C-DREAMTIME is a promising experiment type for future reaction monitoring and for tracking metabolic processes with 13C-enriched compounds.
Sujet(s)
Matières plastiques , Vin , Acides aminés , Glucose , Spectroscopie par résonance magnétique/méthodes , Saccharomyces cerevisiae , Isotopes du carboneRÉSUMÉ
Inversion pulses are commonly employed in MRI for T 1 -weighted contrast and relaxation measurements. In the brain, it is often assumed that adiabatic pulses saturate the nonaqueous magnetization. We investigated this assumption using solid-state NMR to monitor the nonaqueous signal directly following adiabatic inversion and compared this with signals following hard and soft inversion pulses. The effects of the different preparations on relaxation dynamics were explored. Inversion recovery experiments were performed on ex vivo bovine and porcine brains using 360-MHz (8.4 T) and 200-MHz (4.7 T) NMR spectrometers, respectively, using broadband rectangular, adiabatic, and sinc inversion pulses as well as a long rectangular saturation pulse. Analogous human brain MRI experiments were performed at 3 T using single-slice echo-planar imaging. Relaxation data were fitted by mono- and biexponential decay models. Further fitting analysis was performed using only two inversion delay times. Adiabatic and sinc inversion left much of the nonaqueous magnetization along B 0 and resulted in biexponential relaxation. Saturation of both aqueous and nonaqueous magnetization components led to effectively monoexponential T 1 relaxation. Typical adiabatic inversion pulses do not, as has been widely assumed, saturate the nonaqueous proton magnetization in white matter. Unequal magnetization states in aqueous and nonaqueous 1 H reservoirs prepared by soft and adiabatic pulses result in biexponential T 1 relaxation. Both pools must be prepared in the same magnetization state (e.g., saturated or inverted) in order to observe consistent monoexponential relaxation.
Sujet(s)
Encéphale , Imagerie par résonance magnétique , Humains , Animaux , Bovins , Suidae , Imagerie par résonance magnétique/méthodes , Spectroscopie par résonance magnétique , Encéphale/imagerie diagnostique , Imagerie échoplanaireRÉSUMÉ
PURPOSE: We investigated the correlation, reproducibility, and effect of white matter fiber orientation for three myelin-sensitive MRI techniques: magnetization transfer ratio (MTR), inhomogeneous magnetization transfer ratio (ihMTR), and gradient and spin echo-derived myelin water fraction (MWF). METHODS: We measured the three metrics in 17 white and three deep grey matter regions in 17 healthy adults at 3 T. RESULTS: We found a strong correlation between ihMTR and MTR (r = 0.70, p < 0.001) and ihMTR and MWF (r = 0.79, p < 0.001), and a weaker correlation between MTR and MWF (r = 0.54, p < 0.001). The dynamic range in white matter was greatest for MWF (2.0%-27.5%), followed by MTR (14.4%-23.2%) and then ihMTR (1.2%-5.4%). The average scan-rescan coefficient of variation for white matter regions was 0.6% MTR, 0.3% ihMTR, and 0.7% MWF in metric units; however, when adjusted by the dynamic range, these became 6.3%, 6.1% and 2.8%, respectively. All three metrics varied with fiber direction: MWF and ihMTR were lower in white matter fibers perpendicular to B0 by 6% and 1%, respectively, compared with those parallel, whereas MTR was lower by 0.5% at about 40°, with the highest values at 90°. However, separating the apparent orientation dependence by white matter region revealed large dissimilarities in the trends, suggesting that real differences in myelination between regions are confounding the apparent orientation dependence measured using this method. CONCLUSION: The strong correlation between ihMTR and MWF suggests that these techniques are measuring the same myelination; however, the larger dynamic range of MWF may provide more power to detect small differences in myelin.
Sujet(s)
Gaine de myéline , Substance blanche , Humains , Adulte , Reproductibilité des résultats , Encéphale/imagerie diagnostique , Imagerie par résonance magnétique/méthodes , Substance blanche/imagerie diagnostique , Eau , Marqueurs biologiquesRÉSUMÉ
Off-resonance radio frequency irradiation can induce the ordering of proton spins in the dipolar fields of their neighbors, in molecules with restricted mobility. This dipolar order decays with a characteristic relaxation time, T1D , that is very different from the T1 and T2 relaxation of the nuclear alignment with the main magnetic field. Inhomogeneous magnetization transfer (ihMT) imaging is a refinement of magnetization transfer (MT) imaging that isolates the MT signal dependence on dipolar order relaxation times within motion-constrained molecules. Because T1D relaxation is a unique contrast mechanism, ihMT may enable improved characterization of tissue. Initial work has stressed the high correlation between ihMT signal and myelin density. Dipolar order relaxation appears to be much longer in membrane lipids than other molecules. Recent work has shown, however, that ihMT acquisitions may also be adjusted to emphasize different ranges of T1D . These newer approaches may be sensitive to other microstructural components of tissue. Here, we review the concepts and history of ihMT and outline the requirements for further development to realize its full potential.
Sujet(s)
Imagerie par résonance magnétique , Gaine de myéline , Imagerie par résonance magnétique/méthodes , Gaine de myéline/composition chimique , Lipides membranaires , Champs magnétiques , DéplacementRÉSUMÉ
OBJECTIVES: In this paper we propose embedding natural fillers, such as pristine and functionalized chitin nanocrystals, into resin adhesives to produce photopolymerizable dental filled adhesives with enhanced biocompatibility, hydrophobicity, mechanical resistance, and anti-bacterial properties. METHODS: Chitin nanocrystals (ChNC) were functionalized with decanoyl chloride and methacrylic anhydride to produce ChNC-C10 and ChNC-MA, respectively. These hydrophobically functionalized chitin nanocrystals were incorporated into a resin adhesive at concentrations of 0.5-3.0 wt% to assess the materials' physical and mechanical properties through Fourier-transform infrared (FTIR) spectroscopy, solid-state NMR spectroscopy, X-ray diffraction (XRD), elemental analysis, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), flexural strength, microhardness, and water sorption tests. RESULTS: The analytical techniques confirmed the successful preparation of chitin nanocrystals from commercial chitin powder derived from shrimp shells and the efficient hydrophobization of their surface. Electron microscope images indicated that the increased hydrophobicity of ChNC-C10 promotes the formation of layered structures throughout the resin adhesive, while ChNC-MA tends to form aggregates in the matrix. Adhesives filled with ChNC-C10 enhanced their flexural strength, microhardness, and thermal stability and decreased their water sorption and degree of conversion. Adhesives filled with ChNC-MA resulted in improvements in microhardness, in water sorption and degree of conversion, although they did not exhibit augmentation of their flexural strength and thermal stability. SIGNIFICANCE: In light of the improved physical and mechanical properties with respect to the control, resin adhesives filled with anti-bacterial chitin nanocrystals are promising new materials for dental applications, especially those filled with low/moderate amounts of ChNC-C10.
Sujet(s)
Ciments dentaires , Nanoparticules , Ciments dentaires/composition chimique , Chitine , Test de matériaux , Interactions hydrophobes et hydrophiles , Nanoparticules/composition chimique , Résines synthétiques/composition chimique , Eau/composition chimique , Propriétés de surface , Céments résine/composition chimique , Résines composites/composition chimiqueRÉSUMÉ
Dynamic covalent bonds bear great potential for the development of adaptive and self-healing materials. Herein, we introduce a versatile concept not only for the design of low-molecular-weight liquid crystals but also for their in situ postsynthetic modification by using the dynamic covalent nature of imine bonds. The methodology allows systematic investigations of structure-property relationships as well as the manipulation of the materials' behavior (liquid crystallinity) and the introduction of additional properties (here, fluorescence) by a solvent-free method. For the first time, the transamination reaction is followed by variable-temperature 19F solid-state NMR in the mesophase, providing insights into the reaction dynamics in a liquid crystalline material. Finally, the application potential for the design of liquid crystalline materials with adaptive properties is demonstrated by a sequential combination of these reactions.
RÉSUMÉ
The human somatosensory network relies on ionic currents to sense, transmit, and process tactile information. We investigate hydrogels that similarly transduce pressure into ionic currents, forming a piezoionic skin. As in rapid- and slow-adapting mechanoreceptors, piezoionic currents can vary widely in duration, from milliseconds to hundreds of seconds. These currents are shown to elicit direct neuromodulation and muscle excitation, suggesting a path toward bionic sensory interfaces. The signal magnitude and duration depend on cationic and anionic mobility differences. Patterned hydrogel films with gradients of fixed charge provide voltage offsets akin to cell potentials. The combined effects enable the creation of self-powered and ultrasoft piezoionic mechanoreceptors that generate a charge density four to six orders of magnitude higher than those of triboelectric and piezoelectric devices.
Sujet(s)
Hydrogels , Mécanorécepteurs , Humains , Phénomènes mécaniques , Peau , Toucher/physiologieRÉSUMÉ
Inhomogeneous magnetization transfer (ihMT) is a novel MRI technique used to measure white matter myelination in the brain and spinal cord. In the brain, ihMT has a strong orientation dependence which is likely to arise from the anisotropy of dipolar couplings between protons on oriented lipids in the myelin bilayers. We measured the orientation dependence of the second moment (M2) of the lineshape, dipolar order relaxation rate (R1D), and ihMT ratio (ihMTR) in an oriented phospholipid bilayer at 9.4 T. We found a strong orientation dependence in all three parameters. ihMTR and R1D were maximized when the bilayers were aligned perpendicular to B0 and minimized near the magic angle (â¼54.7°). M2 followed an orientation dependence given by the second Legendre polynomial squared as predicted by the form of the secular dipolar Hamiltonian. These results were used to calculate the orientation dependence of R1D and ihMTR in a diffusionless myelin sheath model, which showed ihMTR was maximised for fibers perpendicular to B0 and minimised at 45°, similar to ex-vivo spinal cord with a larger prepulse frequency offset, but in contrast to in vivo brain findings. Adding fiber dispersion to this model smoothed the orientation dependence curve as expected. Our results suggest the importance of the effects of lipid diffusion and prepulse offset frequency on ihMTR.
Sujet(s)
Phospholipides , Substance blanche , Encéphale , Imagerie par résonance magnétique/méthodes , Gaine de myélineRÉSUMÉ
NMR/MRI are critical tools for studying molecular structure and interactions but suffer from relatively low sensitivity and spectral overlap. Here, a Nuclear Magnetic Resonance (NMR) approach, termed DREAMTIME, is introduced that provides "a molecular window" inside complex systems, capable of showing only what the user desires, with complete molecular specificity. The user chooses a list of molecules of interest, and the approach detects only those targets while all other molecules are invisible. The approach is demonstrated in whole human blood and urine, small living aquatic organisms in 1D/2D NMR, and MRI. Finally, as proof-of-concept, once overlap is removed via DREAMTIME, a novel "multi-focusing" approach can be used to increase sensitivity. In human blood and urine, sensitivity increases of 7-12 fold over standard 1 H NMR are observed. Applicable even to unknowns, DREAMTIME has widespread application, from monitoring product formation in organic chemistry to monitoring/identifying suites of molecular targets in complex media or in vivo.
Sujet(s)
Liquides biologiques , Imagerie par résonance magnétique , Humains , Limite de détection , Spectroscopie par résonance magnétique , Structure moléculaireRÉSUMÉ
The properties of chiral nematic and iridescent cellulose nanocrystal films with different monovalent cations (CNC-X) obtained through evaporation-induced self-assembly (EISA) can be modified by a variety of external stimuli. Here, we study the transformations of their optical and structural properties when the films are thermally annealed at 200 °C and 240 °C for up to 2 days. The chiral nematic structure of the most thermally stable films is not destroyed even after extensive heating due to the thermochemical stability of the cellulose backbone and the presence of surface alkali counterions, which suppress catalysis of early stage degradation. Despite the resilience of the cholesteric structure and the overall integrity of heated CNC-X films, thermal annealing is often accompanied by reduction of iridescence, birefringence, and transparency, as well as formation of degradation products. The versatility, sustainability, and stability of CNC-X films highlight their potential as temperature indicators and photonic devices.
Sujet(s)
Cellulose , Iridescence , Nanoparticules , TempératureRÉSUMÉ
A full picture of longitudinal relaxation in complex heterogeneous environments like white matter brain tissue remains elusive. In tissue, successive approximations, from the solvation layer model to the two pool model, have highlighted how longitudinal magnetization evolution depends on both inter-compartmental exchange and spin-lattice relaxation. In white matter, however, these models fail to capture the behaviour of the two distinct aqueous pools, myelin water and intra/extra-cellular water. A challenge with testing more comprehensive multi-pool models lies in directly observing all pools, both aqueous and non-aqueous. In this work, we advance these efforts by integrating three main experimental and analytical elements: direct observation of the longitudinal relaxation of both the aqueous and the non-aqueous protons in white matter, a wide range of different initial conditions, and application of an analysis pipeline which includes lineshape, CPMG, and fitting of a four pool model. An eigenvector interpretation of the four pool model highlights how longitudinal relaxation in white matter depends on initial conditions. We find that a single set of model parameters is able to describe the entire range of relaxation behaviour observed in all the separable aqueous and non-aqueous pools in experiments involving six different initial conditions. Understanding of the nature and connectedness of the tissue components is crucial in the design and interpretation of many MRI measurements, especially those based on magnetization transfer and longitudinal relaxation. In particular, the dependency of relaxation behaviour on initial conditions is likely the basis for understanding method-dependent discrepancies in in vivo T1.
Sujet(s)
Encéphale/imagerie diagnostique , Spectroscopie par résonance magnétique/méthodes , Substance blanche/imagerie diagnostique , Animaux , Bovins , Protons , EauRÉSUMÉ
Bioderived cellulose nanocrystals (CNCs) are used to create light, flexible, biocompatible, and biodegradable electronic devices. Herein, surface modification of cellulose nanocrystals was employed to fabricate cationic and anionic CNCs. Subsequently, we demonstrated rectification behavior from a fixed junction between two agarose hydrogels doped with cationic and anionic cellulose nanocrystals. The current rectification ratio reaches 70 reproducibly, which is significantly higher than that for analogous diodes generated with microfibrillated cellulose (â¼15) and the first polyelectrolyte gel diode (â¼40). The current-voltage characteristics of the CNC-hydrogel diode are influenced by concentration, gel thickness, scanning frequency, and applied voltage. The high surface area of CNC resulted in high charge density after surface modification, which in turn resulted in good rectification behavior from only small amounts of dopant material.
Sujet(s)
Cellulose/composition chimique , Électronique , Hydrogels/composition chimique , Nanoparticules/composition chimique , Agarose/composition chimique , Dépollution biologique de l'environnement , Hydrogels/métabolisme , Polyélectrolytes/composition chimique , Rhéologie , Propriétés de surfaceRÉSUMÉ
While NMR and MRI are often thought of as expensive techniques requiring large institutional investment, opportunities for low-cost, low-field NMR and MRI abound. We discuss a number of approaches to performing magnetic resonance experiments with inexpensive, easy to find or build components, aimed at applications in industry, education, and research. Opportunities that aim to make NMR accessible to a broad community are highlighted. We describe and demonstrate some projects from our laboratory, including a new prototype instrument for measurements at frequencies up to â¼200â¯kHz and demonstrate its application to the study of the rapidly advancing technique known as inhomogeneous magnetization transfer imaging, a promising method for characterizing myelin in vivo.
Sujet(s)
Imagerie par résonance magnétique/économie , Imagerie par résonance magnétique/instrumentation , Spectroscopie par résonance magnétique/économie , Spectroscopie par résonance magnétique/instrumentation , Neuroimagerie/instrumentation , Conception d'appareillage , Humains , LogicielRÉSUMÉ
Cellulose-derived materials, such as microcellulose and nanocellulose, are sustainable materials with a wide range of applications. Here, through a multi-analytical approach, we investigate the thermal degradation of microfibrillar cellulose filaments (CFs); acidic cellulose nanocrystals (CNC-H), containing sulfate half-ester groups on the surface; and neutralized cellulose nanocrystals (CNC-Na), where the protons are replaced by sodium ions. CFs have a simple degradation mechanism, associated with extensive dehydration, decarboxylation, and decarbonylation, and the highest thermal stability of the three (â¼325 °C) despite the abundance of amorphous regions and inhomogeneous fibrous mass that make them structurally and morphologically less homogeneous than high-crystallinity CNCs. CNC-H decompose in a complex way below 200 °C, with large char fractions and evaporation of sulfur compounds at high temperatures, while sodium counterions in CNC-Na can improve the thermal stability up to 300 °C, where the pyrolysis leads to partial rehydration and formation of sodium hydroxide on the surface.
Sujet(s)
Cellulose , Nanoparticules , Hydroxyde de sodiumRÉSUMÉ
Diffraction gratings are important for modern optical components, such as optical multiplexers and signal processors. Although liquid crystal (LC) gratings based on thermotropic LCs have been extensively explored, they often require expensive molecules and complicated manufacturing processes. Lyotropic LCs, which can be broadly obtained from both synthetic and natural sources, have not yet been applied in optical gratings. Herein, a facile grating fabrication method using a biosourced lyotropic LC formed by cellulose nanocrystals (CNCs), a material extracted from plants, is reported. Hydrogel sheets with vertically aligned uniform periodic structures are obtained by fixing the highly oriented chiral nematic LC of CNCs in polymer networks under the cooperative effects of gravity on phase separation and a magnetic field on LC orientation. The hydrogel generates up to sixth-order diffraction spots and shows linear polarization selectivity, with tunable grating periodicity controlled through LC concentration regulation. This synthesis strategy can be broadly applied to various grating materials and opens up a new area of optical materials from lyotropic LCs.
RÉSUMÉ
Bulk crystallization in flexible polymeric systems is difficult to control due to the random orientation of the chains. Here we report a photo cross-linking strategy that results in simultaneous cross-linking and crystallization of polysiloxane chains into millimeter sized leaf-like polycrystalline structures. Polymers containing pendant anthracene groups are prepared and undergo [4+4] photocycloaddition under 365 nm irradiation at room temperature. The growth and morphology of the crystalline structures is studied using polarized optical microscopy (POM) and atomic force microscopy and is found to progress through three unique stages of nucleation, growth, and constriction. The mobility of the individual chains is probed using pulsed-field gradient (PFG) NMR to provide insights into the diffusion processes that may govern chain transport to the growing crystal fronts. The room temperature crystallization of this conventionally amorphous polymer system may allow for a new level of morphological control for silicone materials.
RÉSUMÉ
The functionalization of cellulose nanocrystal (CNC) aerogels was achieved through a two-step synthetic procedure. CNC aerogels were prepared under hydrothermal conditions, followed by solvent exchange and critical point drying. The CNC aerogels were functionalized with a methacrylate group and then underwent thiol-ene click chemistry to impart a range of functionalities onto the surface of the CNC aerogel. The use of the functionalized aerogels as oil absorbents was then investigated, with the most hydrophobic CNC aerogel, 1 H,1 H,2 H,2 H-perfluorodecanethiol-functionalized CNC aerogel, exhibiting the highest absorption of xylenes at 2.9 mL g-1.