Biomodulation of Induced Tooth Movement by Three Methods, Corticopuncture, Photobiomodulation, and Their Combination: An Animal Study.

Objective: The aim of this study was to assess the effects of accelerated tooth movement (ATM) methods: corticopuncture (CP), photobiomodulation (PBM), and their combination (CP + PBM) by evaluating tooth displacement, alveolar bone changes, and molecular and cellular response compared with conventional induced tooth movement. Materials and methods: Tooth movement and bone changes were evaluated on days 1, 3, and 7 (9 animals per time point) using microtomography, histological, and immunohistochemical evaluation, at compression and tension sites. CP groups received two perforations in the palate and one mesial to the molars. PBM was performed using GaAlAs diode laser applied every other day for 7 days (λ = 808 nm, 100 mW) in two points for 15 sec/point and total energy of 3 J. Results: Tooth movement was significantly increased in all three ATM groups after 7 days compared with the control group (mean 0.24 mm) by 27% PBM (0.31 mm), 45% CP (0.35 mm), and 57% CP + PBM (0.38 mm) (p < 0.05). At the compression side, all ATM groups showed significant decrease in bone density on day 3 (p < 0.05) and significant less bone volume on day 7 compared with Control (p < 0.05). At the tension side, PBM group showed a significant increase in bone density and volume on day 3 (p < 0.05). Immunohistochemistry analysis showed that at the compression side, tartrate-resistant acid phosphatase-positive cells, RANKL, and tumor necrosis factor-alpha expression were highly marked of the PBM and the combined method groups (p < 0.05). PBM and CP + PBM groups showed a significant increase in expression Runt-related transcription factor 2 and osterix (p < 0.05) at the tension side. Conclusions: All ATM groups showed increase on tooth displacement with CP + PBM group showing greatest tooth displacement. CP method appears to stimulate bone catabolism, PBM has more effect on bone formation, and the combined method showing a synergistic effect on bone remodeling.

Mini-implant assisted rapid palatal expansion (MARPE) effects on adult obstructive sleep apnea (OSA) and quality of life: a multi-center prospective controlled trial.

INTRODUCTION: Transverse maxillary deficiency is a high prevalent growth disorder within the adult population that may lead to serious health issues, such as detrimental malocclusions and higher risk of developing obstructive sleep apnea (OSA). Mini-implant assisted rapid palatal expansion (MARPE), as it expands the mid-face and augment the nasal and oral cavities dimensions, may reduce the airflow resistance and thus play an important role on OSA therapy in some patients. The main objective of the present trial is to assess MARPE effects on the sleep and quality of life of non-obese adult OSA patients with transverse maxillary deficiency. METHODS: A total of 32 participants were divided into intervention and control groups. They underwent physical evaluation, Epworth Sleepiness Scale (EES) and Quebec Sleep Questionnaire (QSQ), cone-beam computed tomography (CBCT) and home sleep testing (HST) for OSA before MARPE (T1) and 6 months after the intervention (T2). RESULTS: Questionnaires EES (daytime sleepiness) and QSQ (OSA-related quality of life) presented significant statistical differences between the groups. We also found clinical and statistical (p < 0.01) differences between the groups regarding the apnea/hypopnea index (AHI), as well as others HST parameters (mean oxygen saturation and snoring duration). CONCLUSION: In our sample, MARPE (without any auxiliary osteotomy) showed a good success rate (85%) and promoted important occlusal and respiratory benefits. We observed important daytime sleepiness and OSA-related quality of life improvement, as well as the AHI (65.3%), oxygen saturation and snoring duration.

Effects of maxillary skeletal expansion on respiratory function and sport performance in a para-athlete - A case report.

The aim of this case report was to demonstrate the effects of the Maxillary Skeletal Expander (MSE) used to orthopedically correct a maxillary constriction, on the respiratory functions and swimming performance of a Para-athlete. Cone-beam computed tomography (CBCT) images taken before and after MSE activation were used to demonstrate the disarticulation of midpalatal suture, and the changes involved in dental and nasomaxillary structures, nasal cavity and pharyngeal airway. Respiratory tests included: maximum inspiratory and expiratory pressure, oral peak expiratory flow and inspiratory nasal flow. The 6-min-walk and heart rate recovery tests were also performed. Patient's swimming performances during national swimming competitions were compared. CBCT images showed that palatal expansion was 5.91  mm at the suture, and that nasal and pharyngeal airways increased in volume by 31%. All respiratory indices improved after MSE activation. The 6-min walk test and heart rate recovery test performance also improved after the maxillary expansion. Patient's swimming performance in all category were anemic prior to the treatment, but performance improved considerably after the expansion, particularly the 100 m-Backstroke modality. MSE treatment had a significant positive impact in respiratory functions and sport performance.

Effects of corticopuncture (CP) and low-level laser therapy (LLLT) on the rate of tooth movement and root resorption in rats using micro-CT evaluation.

The aim of this study was to compare the rate of tooth displacement, quantity of root resorption, and alveolar bone changes in five groups: corticopuncture (CP), low-level laser therapy (LLLT), CP combined with LLLT (CP + LLLT), control (C), and negative control (NC). A total of 60 half-maxilla from 30 male Wistar rats (10 weeks old) were divided randomly into five groups: three (CP, LLLT, and CP + LLLT) test groups with different stimulation for accelerated-tooth-movement (ATM), one control (C) group, and one negative control (NC) group with no tooth movement. Nickel-titanium coil springs with 50 g of force were tied from the upper left and right first molars to micro-implants placed behind the maxillary incisors. For the CP and CP + LLLT groups, two perforations in the palate and one mesially to the molars were performed. For the LLLT and CP + LLLT groups, GaAlAs diode laser was applied every other day for 14 days (810 nm, 100 mW, 15 s). The tooth displacements were measured directly from the rat's mouth and indirectly from microcomputer (micro-CT) tomographic images. Bone responses at the tension and compression sites and root resorption were analyzed from micro-CT images. The resulting alveolar bone responses were evaluated by measuring bone mineral density (BMD), bone volume fraction (BV/TV), and trabecular thickness (TbTh). Root resorption crater volumes were measured on both compression and tension sides of mesial and distal buccal roots. The tooth displacement in the CP + LLLT group was the greatest when measured clinically, followed by the CP, LLLT, and control groups (C and NC), respectively (p <0.05). The tooth movements measured from micro-CT images showed statistically higher displacement in the CP and CP + LLLT groups compared to the LLLT and control groups. The BMD, BV/TV, and TbTh values were lower at the compression side and higher at the tension side for all three test groups compared to the control group. The root resorption crater volume of the distal buccal root was higher in the control group, followed by CP, LLLT, and CP + LLLT, mostly at the compression site. Combining corticopuncture and low-level laser therapy (CP + LLLT) produced more tooth displacement and less root resorption at the compression side. The combined technique also promoted higher alveolar bone formation at the tension side.

Corticopuncture Facilitated Microimplant-Assisted Rapid Palatal Expansion.

INTRODUCTION: Microimplant-assisted rapid palatal expansion (MARPE) has been considered an alternative to avoid extensive surgical procedures. In order to obtain skeletal results of MARPE, force should be enough to overcome areas of resistance and the first one that is required to be disrupted is the midpalatal suture, which becomes increasingly interdigitated after adolescence. OBJECTIVE: The present study aimed at providing a novel approach using a minimally invasive method called corticopuncture (CP) in association with MARPE illustrated by a case report of a 35-year-old Brazilian female Caucasian patient presenting maxillary transverse deficiency. METHOD: Treatment plan started with an orthopedic correction of the transverse problem using a MARPE device. After many unsuccessful attempts to activate MARPE, corticopunctures were performed along the midpalatal suture. CP procedure at the midpalatal suture included 8 perforations (2 mm apart), performed after previous predrilling followed by miniscrew insertion (5 mm thread length and 1.8 mm diameter). RESULTS: After CP and new activation protocol, the opening of the midpalatal suture was observed by CBCT images, showing skeletal results, suture split of 3.14 mm (premolar area) and 2.06 (molar area), an increase of 4.3 mm (premolar) and 3.03 mm (molar) in basal bone width, 4.43 mm (premolar) and 3.1 mm (molar) in cortical bone width, and minimal dental effects (mean of 1.2° of tooth tipping). CONCLUSION: The combination of MARPE and corticopuncture method was proved to be a nonsurgical treatment option to correct maxillary transverse deficiency in an adult patient. CP was able to weaken suture interdigitation thus facilitating the split.

Non-surgical treatment of transverse deficiency in adults using Microimplant-assisted Rapid Palatal Expansion (MARPE).

INTRODUCTION: Maxillary transverse deficiency is a highly prevalent malocclusion present in all age groups, from primary to permanent dentition. If not treated on time, it can aggravate and evolve to a more complex malocclusion, hindering facial growth and development. Aside from the occlusal consequences, the deficiency can bring about serious respiratory problems as well, due to the consequent nasal constriction usually associated. In growing patients, this condition can be easily handled with a conventional rapid palatal expansion. However, mature patients are frequently subjected to a more invasive procedure, the surgically-assisted rapid palatal expansion (SARPE). More recently, researches have demonstrated that it is possible to expand the maxilla in grown patients without performing osteotomies, but using microimplants anchorage instead. This novel technique is called microimplant-assisted rapid palatal expansion (MARPE). OBJECTIVE: The aim of the present article was to demonstrate and discuss a MARPE technique developed by Dr. Won Moon and colleagues at University of California - Los Angeles (UCLA). METHODS: All laboratory and clinical steps needed for its correct execution are thoroughly described. For better comprehension, a mature patient case is reported, detailing all the treatment progress and results obtained. CONCLUSION: It was concluded that the demonstrated technique could be an interesting alternative to SARPE in the majority of non-growing patients with maxillary transverse deficiency. The present patient showed important occlusal and respiratory benefits following the procedure, without requiring any surgical intervention.

Non-surgical treatment of transverse deficiency in adults using Microimplant-assisted Rapid Palatal Expansion (MARPE)

ABSTRACT Introduction: Maxillary transverse deficiency is a highly prevalent malocclusion present in all age groups, from primary to permanent dentition. If not treated on time, it can aggravate and evolve to a more complex malocclusion, hindering facial growth and development. Aside from the occlusal consequences, the deficiency can bring about serious respiratory problems as well, due to the consequent nasal constriction usually associated. In growing patients, this condition can be easily handled with a conventional rapid palatal expansion. However, mature patients are frequently subjected to a more invasive procedure, the surgically-assisted rapid palatal expansion (SARPE). More recently, researches have demonstrated that it is possible to expand the maxilla in grown patients without performing osteotomies, but using microimplants anchorage instead. This novel technique is called microimplant-assisted rapid palatal expansion (MARPE). Objective: The aim of the present article was to demonstrate and discuss a MARPE technique developed by Dr. Won Moon and colleagues at University of California - Los Angeles (UCLA). Methods: All laboratory and clinical steps needed for its correct execution are thoroughly described. For better comprehension, a mature patient case is reported, detailing all the treatment progress and results obtained. Conclusion: It was concluded that the demonstrated technique could be an interesting alternative to SARPE in the majority of non-growing patients with maxillary transverse deficiency. The present patient showed important occlusal and respiratory benefits following the procedure, without requiring any surgical intervention.

RESUMO Introdução: a deficiência transversa da maxila é uma má oclusão com alta prevalência em todas as faixas etárias, da dentição decídua à permanente. Se não for corrigida, pode agravar-se com o passar do tempo, prejudicando o crescimento e desenvolvimento facial. Além dos prejuízos oclusais, essa deficiência pode trazer problemas respiratórios também severos, devido à consequente constrição da cavidade nasal. Em pacientes em crescimento, a sua resolução é relativamente simples, por meio da expansão rápida convencional da maxila. Porém, os pacientes já maduros geralmente são encaminhados para um procedimento mais invasivo, a expansão rápida de maxila assistida cirurgicamente (SARPE). Mais recentemente, pesquisadores têm demonstrado que é possível executar a expansão palatal esquelética em pacientes adultos sem auxílio de osteotomias, mas sim com auxílio de mini-implantes. Essa técnica é denominada Microimplant-Assisted Rapid Palatal Expansion, ou MARPE. Objetivo: o objetivo do presente artigo é demonstrar e discutir uma das técnicas disponíveis de MARPE, desenvolvida por Won Moon e colaboradores, na University of California, Los Angeles (UCLA). Métodos: a técnica encontra-se detalhadamente descrita, com as etapas laboratoriais e clínicas que devem ser seguidas para sua correta execução. Para descrevê-la, é apresentado o caso clínico de uma paciente adulta, detalhando toda a sequência do tratamento e os resultados obtidos. Conclusão: a técnica apresentada pode ser uma alternativa não invasiva à SARPE na resolução da deficiência transversa de maxila, podendo ser empregada na maioria dos pacientes com crescimento facial finalizado. A paciente apresentada demonstrou benefícios significativos nos aspectos oclusal e respiratório, sem a necessidade de intervenção cirúrgica.

Miniscrew-assisted rapid palatal expander (MARPE): the quest for pure orthopedic movement.

The midpalatal suture has bone margins with thick connective tissue interposed between them, and it does not represent the fusion of maxillary palatal processes only, but also the fusion of palatal processes of the jaws and horizontal osseous laminae of palatal bones. Changing it implies affecting neighboring areas. It has got three segments that should be considered by all clinical analyses, whether therapeutic or experimental: the anterior segment (before the incisive foramen, or intermaxillary segment), the middle segment (from the incisive foramen to the suture transversal to the palatal bone ) and the posterior segment (after the suture transversal to the palatal bone ). Rapid palatal expansion might be recommended for patients at the final pubertal growth stage, in addition to adult patients with maxillary constriction. It represents a treatment solution that can potentially avoid surgical intervention. When performed in association with rapid palatal expanders, it might enhance the skeletal effects of the latter. Of the various designs of expansion appliances, MARPE (miniscrew-assisted rapid palatal expander) has been modified in order to allow its operational advantages and outcomes to become familiar in the clinical practice.

Low-level laser therapy stimulates bone metabolism and inhibits root resorption during tooth movement in a rodent model.

This study evaluated the biological effects of low-level laser therapy (LLLT) on bone remodeling, tooth displacement and root resorption, occurred during the orthodontic tooth movement. Upper first molars of a total of sixty-eight male rats were subjected to orthodontic tooth movement and euthanized on days 3, 6, 9, 14 and 21 days and divided as negative control, control and LLLT group. Tooth displacement and histomorphometric analysis were performed in all animals; scanning electron microscopy analysis was done on days 3, 6 and 9, as well as the immunohistochemistry analysis of RANKL/OPG and TRAP markers. Volumetric changes in alveolar bone were analyzed using MicroCT images on days 14 and 21. LLLT influenced bone resorption by increasing the number of TRAP-positive osteoclasts and the RANKL expression at the compression side. This resulted in less alveolar bone and hyalinization areas on days 6, 9 and 14. LLLT also induced less bone volume and density, facilitating significant acceleration of tooth movement and potential reduction in root resorption besides stimulating bone formation at the tension side by enhancing OPG expression, increasing trabecular thickness and bone volume on day 21. Taken together, our results indicate that LLLT can stimulate bone remodeling reducing root resorption in a rat model. LLLT improves tooth movement via bone formation and bone resorption in a rat model.

Miniscrew-assisted rapid palatal expander (MARPE): the quest for pure orthopedic movement

ABSTRACT The midpalatal suture has bone margins with thick connective tissue interposed between them, and it does not represent the fusion of maxillary palatal processes only, but also the fusion of palatal processes of the jaws and horizontal osseous laminae of palatal bones. Changing it implies affecting neighboring areas. It has got three segments that should be considered by all clinical analyses, whether therapeutic or experimental: the anterior segment (before the incisive foramen, or intermaxillary segment), the middle segment (from the incisive foramen to the suture transversal to the palatal bone ) and the posterior segment (after the suture transversal to the palatal bone ). Rapid palatal expansion might be recommended for patients at the final pubertal growth stage, in addition to adult patients with maxillary constriction. It represents a treatment solution that can potentially avoid surgical intervention. When performed in association with rapid palatal expanders, it might enhance the skeletal effects of the latter. Of the various designs of expansion appliances, MARPE (miniscrew-assisted rapid palatal expander) has been modified in order to allow its operational advantages and outcomes to become familiar in the clinical practice.

RESUMO A sutura palatina mediana tem margens ósseas interpostas por tecido conjuntivo denso e não representa apenas a união dos processos palatinos da maxila, mas também a dos processos alveolares das maxilas e das lâminas horizontais dos ossos palatinos. Modificá-la implica em influenciar outras áreas vizinhas. Ela tem três segmentos a serem considerados em todas as análises clínicas, terapêuticas e experimentais: anterior (antes do forame incisivo, ou intermaxilar), médio (do forame incisivo até a sutura transversa com o osso palatino) e posterior (após a sutura transversa com o osso palatino). A expansão rápida da maxila pode ser indicada para pacientes que se encontram no final da fase de crescimento da puberdade, além de pacientes adultos com atresia maxilar, representando uma solução de tratamento, possivelmente evitando uma intervenção cirúrgica. Quando associada a aparelhos de protração maxilar, pode maximizar os efeitos esqueléticos desses. Entre os vários designs de aparelhos disjuntores, ultimamente encontra-se o MARPE (Miniscrew-Assisted Rapid Palatal Expander), que tem sido modificado para que ocorra, na rotina clínica, uma familiarização com suas vantagens operatórias e resultados obtidos.

Early mixed dentition treatment of bilateral impaction of permanent mandibular first molars.

Available scientific literature is scarce in covering cases involving impaction of permanent mandibular first molars treated in mixed dentition patients. The purpose of this report was to present the case of a 7-year-old patient with bilateral impaction of permanent mandibular first molars treated early using a simple and effective removable appliance. The proposed intervention involved the construction of a removable acrylic appliance with bilateral titanium-molybdenum alloy distalizing springs to disimpact and allow complete eruption of the molars. A button was bonded to the occlusal surface of each molar to be used as a leverage point for the distalizing springs. Following seven months of treatment, both the permanent mandibular right and left first molars were upright and in physiologic position. This case demonstrates that, when this problem is identified and treated early, pediatric dentists have the opportunity to minimize the complexity of future orthodontic treatment and limit the extent of malocclusion in the permanent dentition.

Influence of the vertical position of maxillary central incisors on the perception of smile esthetics among orthodontists and laypersons.

OBJECTIVE: The purpose of this study was to determine the perception of smile esthetics among orthodontists and laypeople with respect to different upper central incisor vertical positions in a frontal smile analysis. MATERIALS AND METHODS: A frontal close-up smile photo of an adult Caucasian woman was selected. The patient had healthy upper anterior dentition and had no history of orthodontic treatment. Images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. All images were assessed in three different views: full smile, gingival close-up excluding incisal edges, and incisal close-up excluding gingival margins. Images were randomly assembled in an album, which was given to 120 judges: 60 orthodontists and 60 laypersons. Each rater was asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were then statistically analyzed. RESULTS: The highest rated smiles showed two notable characteristics: the central-to-lateral incisal step was 1.5 mm; and the central incisor gingival margins matched the laterals, and both were 0.5 mm below the line of the canine gingival margins. The least attractive smile was the one with no step between the centrals and laterals, and with the central incisor gingival margins 1.0 mm above the canine gingival margins. CONCLUSION: The results of this study indicate that slightly extruded upper central incisors are more esthetically preferred than intruded. CLINICAL SIGNIFICANCE: The upper central incisors are the key determinant in evaluating smile esthetics, and thus, the assessment of their ideal vertical positioning is an aspect of paramount importance.

Influence of maxillary incisor edge asymmetries on the perception of smile esthetics among orthodontists and laypersons.

INTRODUCTION: Our objective was to determine the perception of smile esthetics among orthodontists and laypeople with respect to asymmetries on the maxillary incisor edges in a frontal smile analysis. METHODS: Two frontal close-up smile photos of 2 women, 1 white and 1 Afro-Brazilian, were selected for this study. Both smiles displayed healthy maxillary anterior dentitions. The images were digitally altered to create tooth wear on the maxillary left central and lateral incisors in 0.5-mm increments. The final images were randomly assembled into a photo album that was given to 120 judges, 60 orthodontists and 60 laypersons. Each rater was asked to evaluate the attractiveness of the images with visual analog scales. The data collected were statistically analyzed with 1-way analysis of variance with the Tukey post-hoc test and the unpaired Student t test. RESULTS: The most attractive smiles in both types of smiles were those without asymmetries and the 0.5-mm wear in the lateral incisor. In general, tooth wear was considered unattractive by both groups of raters following a pattern: the more tooth wear, the more unattractive the smile; tooth wear in the central incisor was considered more unattractive than in the lateral incisor. For both group of raters, 0.5 mm of wear in the central incisor was considered unattractive, whereas the thresholds for lateral incisor discrepancies were 0.5 mm for orthodontists and 1.0 mm for laypersons. CONCLUSIONS: The result of this study corroborates the clinical assumption that symmetry between the maxillary central incisors is a paramount goal for esthetic treatments.