Functional benefit of joint surgery in patients with non-vascular Ehlers-Danlos syndrome: results of a retrospective study.

BACKGROUND: Ehlers-Danlos syndrome (EDS) is a hereditary disease characterised by joint hypermobility, skin hyperextensibility and tissue fragility. Hypermobile EDS (hEDS is the more frequent subtype. Joint surgery may benefit certain patients after failure of medical treatments, but there is no consensus on the optimal surgical management of patients with hEDS. The aims of this retrospective study were to chart the surgical management of patients with hEDS, to determine the role of arthroscopy and to evaluate the functional results of joint surgery, including the reintervention rates. RESULTS: A total of 69 patients with non-vascular EDS were evaluated (60 female; 87%). Mean (SD) age at first surgery was 25.6 ± 11.1 years. Among the 69 patients, first surgeries were carried out on the knee (n = 50; 39.4%), ankle (n = 28; 22.0%), shoulder (n = 22; 17.3%), wrist (n = 18; 14.2%) and elbow (n = 9; 7.1%). One-fifth of all first operations (20.8%) were carried out by arthroscopy, most often on the knee (36% of knee surgery cases). At the time of primary surgery, the surgeon was alerted to the diagnosis or suspicion of hEDS in only 33.9% of patients. The rate of reoperations (2 to ≥ 5) was 35.7% (10/28) for the ankle, 40.9% (9/22) for the shoulder, 44.4% (4/9) for the elbow, 50% (9/18) for the wrist and 60% (30/50) for the knee. Local or regional anaesthesia was badly tolerated or ineffective in 27.8%, 36.4% and 66.6% of operations on the wrist, shoulder and elbow, respectively. Overall, the majority of patients (> 70%) were satisfied or very satisfied with their surgery, particularly on the non-dominant side. The lowest satisfaction rate was for shoulder surgery on the dominant side (58.3% dissatisfied). CONCLUSIONS: Surgery for joint instability has a greater chance of success when it is carried out in patients with a known diagnosis of EDS before surgery. The majority of patients were satisfied with their surgery and, with the exception of the knee, there was a low rate of reoperations (≤ 50%). Arthroscopic procedures have an important role to play in these patients, particularly when surgery is performed on the knee.

Finite element analysis part 1 of 2: Influence of short stem implant polyethylene configuration on glenohumeral joint biomechanics.

Purpose: Stress shielding in short-stem arthroplasty can cause critical metaphyseal bone loss. If the size and shape of the humeral shaft are important factors, it is unknown whether the shape of the polyethylene component in reverse shoulder arthroplasty (RSA) affects bone stress around or within the stem. We explored the impact of polyethylene shape on humeral and scapular stress distribution using a finite element model. Methods: We developed a shoulder-specific finite element model. A defined set of muscle forces was applied to simulate movements. An intact rotator cuff state and a superior deficient rotator cuff state were modelled. We used the FX V135 short stem in three conditions: total shoulder arthroplasty (TSA), and RSA with symmetrical and asymmetrical polyethylene (145°/135°). We measured biomechanical markers related to bone stress for different implant sizes. Joint kinematics and the mechanical behaviour of the implant were compared. Results: Rupture of the supraspinatus muscle produced a functionally limited shoulder. The placement of an anatomic TSA with an intact rotator cuff restored function similar to that of a healthy shoulder. RSA in the rotator cuff-deficient shoulder restored function regardless of stem size and polyethylene shape. While stem size had an impact on the stress distribution in the bone and implant, it did not show significant potential for increasing or decreasing overall stress. For the same stem, stress distribution at the humerus is different between TSA and RSA. Polyethylene shape did not alter the transmission of stress to the bone in RSA. Asymmetric polyethylene produced a greater abduction range of motion. Conclusions: In terms of bone stress distribution, smaller stems seemed more appropriate for TSA, while larger stems may be more appropriate for RSA. Polyethylene shape resulted in different ranges of motion but did not influence bone stress. Level of Evidence: Diagnostic Tests or Criteria; Level IV.

Finite element analysis part 2 of 2: Glenohumeral bone stress distribution depends on implant configuration for anatomic and reverse stemless shoulder implants.

Purpose: Our purpose was to quantify stresses in the bone surrounding stemless implants in various configurations. Methods: A detailed finite element model of the glenohumeral joint was used to simulate abduction kinematics before and after arthroplasty and to measure bone stresses around the implants. Two digital patients were simulated: one healthy and one with supraspinatus muscle impairment (deficiency). Two anatomic total shoulder arthroplasty (TSA) configurations were placed in a 135° cutting plane. Two reverse shoulder arthroplasty (RSA) configurations with cutting angles of 135° and 145° were simulated with asymmetrical and symmetrical polyethylene cups, respectively, to obtain humeral neck-shaft angles of 145°. Results: Compared with preoperative models, TSA preserved and RSA restored abduction kinematics. The bone mechanical stresses were located mainly around the central stud of the TSA and were more peripheral to the RSA humeral components. The RSA configuration with the 145° cutting angle and symmetrical cup generated the lowest maximal bone stress and bone volume involvement. Stresses in the scapular cortical bone were highest in the supraspinatus fossa for TSA and the crest of the acromion for RSA. Conclusion: Early stability and glenohumeral bone stress change with implant configuration and should not be extrapolated from anatomic clinical data to reverse configurations. Level of Evidence: Diagnostic tests or criteria; Level IV.

High Rates of Return to Play and Low Recurrence Rate After Arthroscopic Latarjet Procedure for Anterior Shoulder Instability in Rugby Players.

Purpose: To analyze the rate of return to play, changes in athletic level, and recurrence rate and to report subjective outcomes in a series of rugby players with anterior shoulder instability who underwent an arthroscopic Latarjet procedure. Methods: A multicenter retrospective study done in 2 centers on rugby players who were operated on between January 2011 and December 2020 was performed. Rugby players who underwent arthroscopic Latarjet procedure for anterior shoulder stabilization with a minimum follow-up period of 2 years were included. Rugby players were grouped according to their competitive level in their country (recreational, regional, national, and international). Data collected included return to sport after surgery, time to return to rugby, athletic level before and after surgery, patient satisfaction, and subjective scores. Recurrence and apprehension rates were also evaluated. Results: A total of 73 subjects were included. Mean age at time of surgery was 23 ± 5 years. Mean duration of follow-up was 5 ± 2.6 years. Eighty-four percent of rugby players returned to rugby within a mean period of 6.6 months. Initial athletic level was a significant factor (P = .012) for not returning to sport, with 67% of patients who initially played at a recreational level not returning to rugby and 33% of patients who initially played at a regional league level not returning. All national and international players returned to play. Of the 12 non-returning rugby players, only 30% did not return because of their shoulder. Mean Subjective Shoulder Value was 90 ± 9%. Recurrence rate was 7%. Conclusions: Arthroscopic Latarjet procedure proved its efficacy in managing recurrent anterior shoulder instability in rugby players. Return to play was achieved in almost all cases, with low recurrence rates. Despite high global return to the same level of sport, the higher the level of competition, the harder it is for rugby players to resume sport at the same level. Level of Evidence: Level IV, therapeutic case series.

Multidirectional instability of the shoulder: a systematic review with a novel classification.

Purpose: A variety of instabilities are grouped under multidirectional instability (MDI) of the shoulder. This makes understanding its diagnostic process, presentation and treatment difficult due to lack of evidence-based consensus. This review aims to propose a novel classification for subtypes of MDI. Methods: A systematic search was performed on PubMed Medline and Embase. A combination of the following 'MeSH' and 'non-MesH' search terms were used: (1) Glenohumeral joint[tiab] OR Glenohumeral[tiab] OR Shoulder[tiab] OR Shoulder joint[tiab] OR Shoulder[MeSH] OR Shoulder joint[MeSH], (2) Multidirectional[tiab], (3) Instability[tiab] OR Joint instability[MeSH]. Sixty-eight publications which met our criteria were included. Results: There was a high degree of heterogeneity in the definition of MDI. Thirty-one studies (46%) included a trauma etiology in the definition, while 23 studies (34%) did not. Twenty-five studies (37%) excluded patients with labral or bony injuries. Only 15 (22%) studies defined MDI as a global instability (instability in all directions), while 28 (41%) studies considered MDI to be instability in two directions, of which one had to include the inferior direction. Six (9%) studies included the presence of global ligamentous laxity as part of the definition. To improve scientific accuracy, the authors propose a novel AB classification which considers traumatic etiology and the presence of hyperlaxity when subdividing MDI. Conclusion: MDI is defined as symptomatic instability of the shoulder joint in two or more directions. A comprehensive classification system that considers predisposing trauma and the presence of hyperlaxity can provide a more precise assessment of the various existing subtypes of MDI. Level of Evidence: III.

A cadaveric study of the posterior band of the inferior glenohumeral ligament of the shoulder and its dynamic behaviour in different arm positions.

Purpose: The inferior glenohumeral ligament (IGHL) is composed of three parts: the anterior branch or band (AB), the axillary pouch and the posterior band (PB). The latter has rarely been studied. We aim to describe the PB of the IGHL and its dynamic behaviour in different arm positions. Methods: Twelve fresh cadaveric shoulders were used and the two bands (AB and PB) of the IGHL were dissected and isolated, taking away all muscle, ligaments and capsule. Characteristics of the bands were studied in five positions: maximum external rotation (ER1), abduction (ABD), internal rotation (IR), ABD external rotation (ER2) and anterior elevation-adduction-IR (Hawkins-Kennedy test position). Progressive and randomized sectioning of the bands and capsule with a scalpel was performed to study its impact on mobility and translation of the glenohumeral joint. Results: The bands that tensioned first were in ER1, the AB at 97 ± 9° (80-110); in ER2, the AB at 81 ± 19° (30-100); in IR, the PB at 64 ± 9° (50-80); and in ABD, the PB at 87 ± 10° (70-105). Isolated sectioning of the AB had no effect on ABD, whilst isolated sectioning of the PB allowed greater ABD. In ER2, the AB limited anterior translation. After sectioning the AB, anterior translation remained limited by the PB, which wrapped around the humeral head and locked the joint by pressing the two joint surfaces tightly together. In Hawkins-Kennedy position anterior elevation-adduction-IR, the AB is the first constraint and the posterior translation was limited by the PB alone only in four cases. Conclusions: When the IGHL is isolated, ligament limitation of glenohumeral ABD seems to be uniquely dependent on the PB. In the Hawkins and Kennedy position, the AB is the first constraint. In the case of an isolated lesion to the AB, the PB participates in anterior stabilization of the shoulder by wrapping around the humeral head that cannot dislocate. These findings confirm the role of the PB in glenohumeral joint stability. Level of Evidence: Level IV.

Short term results of anatomic stemless shoulder replacement with peripheral neck fixation.

Background: Most of the current stemless implants are using a central neck fixation design. Easytech Stemless replacements (FX Solutions®, Viriat, France) were developed promoting the idea of peripheral fixation of the stemless implant. The aim of this study was to analyze clinical and radiological results of this stemless TSA implanted for osteoarthritis (OA). Methods: A retrospective study of patients who received TSA with the Easytech® Anatomical Shoulder System (FX Solutions®, Viriat, France) for OA was completed at five clinical sites. Preoperative and minimum 2 year follow-up Constant Scores and X-rays were evaluated. Two independent orthopedic surgeons analyzed X-rays to assess anatomy reconstruction and component migration. Revisions and serious adverse effects were reviewed. Results: 129 patients were analyzed with an average follow-up of 37.47 months (24-54). Seven patients had a revision surgery and one of these resulted in the removal of the Anchor Base. The postoperative Constant Scores showed significant improvement with a mean raw Constant Score of 73.78 (38.0-100.0, mean increase 40.96, P < .0001) and mean adjusted Constant Score of 99.14 (42.20-133.30, mean increase 55.68, P < .0001). Radiographic review demonstrated that no modification of the center of rotation (COR) at minimum 24 months was greater than 3 mm and in comparison to preoperative radiographs, restoration of COR was lateralized in 25% of the cases, medialized in 61.5% and 13.5% had no change in COR. The mean value of the cervico-diaphyseal angle was 130.2° (114; 149) at 3 weeks and 129.9° (113.5; 144.0) at 2 years, demonstrating no significant difference (P = .16). 36 patients (35%) had calcar remodeling. Univariate and multivariate logistic regression found no significant factor, which was associated with the variation of the cervico-diaphyseal angle over time, center of rotation, calcar remodeling, or final Constant Score. The Walch B2 and C glenoid subset of patients (n = 13) had overall survival rate of 90.9% [95% CI 75.4-100.0] vs. 98.0% [95% CI 95.3-100.0] in other glenoid types (P < .01). Walch B2/C patients were 4.44 [95% CI 1.13, 17.6] times more likely to have a Constant Score <85 (P = .03). Conclusions: The peripheral fixation of the Easytech® Anatomical Shoulder System for OA provides excellent clinical results and imaging stability at minimum two year follow-up. Elderly age, gender and BMI do not affect the stability.

Mid-Term to Long-Term Follow-Up of Stemless Anatomic Total Shoulder Arthroplasty.

Background: The purpose was to report mid-term to long-term clinical outcomes in a multicentre series of patients who received stemless total shoulder arthroplasty (TSA). The hypothesis was that stemless TSA would be a safe and effective treatment with satisfactory clinical outcomes. Methods: Authors retrospectively reviewed records of 62 stemless TSAs implanted between March 2013 and December 2014. Six were excluded because they had fractures or muscular impairment, which left 56: primary osteoarthritis (n = 49), rheumatoid arthritis (n = 4), avascular necrosis (n = 1), or glenoid dysplasia (n = 2). Outcomes were absolute Constant Score (CS), age-/sex-adjusted CS, and the American Shoulder and Elbow Surgeons (ASES) score. Proportions of patients that achieved substantial clinical benefits for absolute CS and ASES scores were determined. Results: Of the 56 patients, 8 (14%) died (unrelated to TSA), 5 (9%) were lost to follow-up, and 2 (4%) refused participation. One patient was reoperated for infection with implant removal (excluded from analysis), and one for periprosthetic fracture without implant removal. At 7.6 ± 0.5 years (range 6.8-9.3), the remaining 40 patients, aged 71.0 ± 8.5 years, achieved net improvements of 40.7 ± 15.8 (CS), 62%±23% (age-/sex-adjusted CS), and 59.7 ± 16.4 (ASES). Of patients with complete absolute CS (n = 37) and ASES score (n = 28), respectively, 33 (89%) and 27 (96%) achieved substantial clinical benefits. Conclusions: Stemless TSA yields improvements in functional outcomes at mid-term to long-term that exceed the substantial clinical benefits of the absolute CS and ASES score at a mean follow-up of 7.6 years. Although the findings of this study revealed low complications and revision rates, more studies are needed to confirm long-term benefits of stemless TSA. Level of evidence: IV, case series.

Mid- to long-term clinical outcomes after press-fit short stem reverse shoulder arthroplasty.

Background: To date, a limited number of studies report mid- to long-term outcomes of press-fit short stem shoulder arthroplasty. The purpose of this study was to report and analyze mid- to long-term outcomes in a series of patients that received press-fit short stem reverse shoulder arthroplasty (RSA). The hypothesis was that press-fit short stem RSA would be a safe and effective treatment with satisfactory mid- to long-term outcomes. Methods: The authors retrospectively reviewed the records of 60 patients that received RSA using press-fit uncemented short humeral stems by two surgeons between March 2014 and December 2015. The absolute Constant Score (CS), age-/sex-adjusted CS, and the American Shoulder and Elbow Surgeons (ASES) score were recorded preoperatively and postoperatively at a minimum follow-up of 6 years. The proportions of patients that achieved a satisfactory outcome after RSA were based on the substantial clinical benefit, as proposed for the absolute CS (net improvement ≥19.1). Results: Of the initial cohort of 60 patients, 9 (15%) died of causes unrelated to RSA, 5 (8%) were revised with partial implant removal, and 4 (7%) were lost to follow-up. This left a final cohort of 42 patients (70%) with complete postoperative CS (absolute and age-/sex-adjusted) and ASES scores at a mean follow-up of 6.7 ± 0.5 years (range, 6.1-7.8). Of the final cohort, 11 (18%) had complications, of which 9 (15%) were treated conservatively, and 2 (3%) required reoperations without implant removal. Net improvements in functional outcomes were 34.7 ± 21.2 for the absolute CS, 54% ± 32% for the age-/sex-adjusted CS, and postoperative ASES scores were 87.9 ± 13.7. Of the 29 patients who had complete records for absolute CS, 22 (76%) received a substantial clinical benefit (net improvement ≥19.1). Conclusions: Mean net improvements of absolute CS exceeded the substantial clinical benefit after press-fit short stem RSA at a follow-up of 6.1 to 8.6 years. While 5 patients (8%) experienced postoperative instability, none had fracture sequelae, which indicates that offset or angular adjustments may be required even in patients with normal bony anatomy. Press-fit short stem RSA is a safe and effective treatment with satisfactory mid- to long-term outcomes, with no stem revisions for aseptic reasons, which compares favorably to the literature that reports high rates of osteolysis and subsequent stem loosening.

Specific Design of a Press Fit Humeral Stem Provides low Stress Shielding in Reverse Shoulder Arthroplasty at minimum 5 Years FU.

Press fit fixation is becoming more popular in RSA to preserve, in theory, bone capital. Several studies report that bone resorption can be very high around humeral stems depending on their size, shape and mode of fixation. The aim of the current study is to mid-term follow-up clinical and radiological result of a press fit ovoid regular stem RSA in non acute trauma cases. Materials and Methods: We performed a retrospective monocentric study of patients continuously implanted with the Humeris® stem RSA for degenerative change of the shoulder. Nineteen shoulders, in eighteen patients (74.6 y.o (from 69 to 81)), were available at minimum five years follow-up. Results: The mean final adjusted Constant score was 111.9 (65 to 130), and the mean ASES score was 49.82 (10 to 60). Humeral resorption was observed in 21% of cases. We found a statistically significant (p = .014) lower adjusted Constant score in patients presenting with resorption on post-operative X-rays compared to those without resorption (115.6 vs. 98.25). Half cases of patients presenting a resorption underwent L'Episcopo procedure during surgery. Humeral resorption occurs the first year after surgery and do not increase even 8 years after surgery. Analysis demonstrated no correlation between the value of filling ratios and bone resorption. Conclusion: The current study confirms a low rate of stress shielding around the studied stem, with rare bony resorption and no osteopenia around the humeral stem. This study highlights the importance of choosing the appropriate proximal shape and length of the humeral stem for press fit fixation in RSA.

A biomechanical study of the medial row tightening on stability of single stitch suture-bridge construct.

PURPOSE: To define the more stable knot tightening of a suture bridge when a single limb is preserved. METHODS: Five different sutures were tested: No. 2 Ethibond (Ethicon), Hi-Fi (ConMed Linvatec), Sutblue (SBM), SingleFlat (SBM), Hi-Fi Ribbon (ConMed Linvatec). A Surgeon's Knot was tied around a 30-mm circumference device, 6 times for each experiment. A single limb was kept to analyze failure modes of the knot. First step was to analyze which of pulling or sliding suture of the construct must be kept preventing failure of the knot. The cutting distance from the knot was evaluated at 1 mm and 4 mm with the suture loops pre-tensioned to 10 N and fixed to a second row after a 50 N tension load. The more stable construct was found: a single-pull load to 100 N and cyclic load (to 50 N for 30 cycles) experiments were conducted to evaluate the impact of cycling on knot loosening. RESULTS: The more stable construct was obtained when the non-post limb was tensioned, and the post limb was cut at 4 mm (p < 0.01). Loop circumference increased after each experiment for all tested sutures, independently of the preserved limb and the cutting distance. Elongation was significant for all tested sutures in all groups. Knot failure mostly occurred by slippage, only with tapes. CONCLUSIONS: A suture-bridge construct with the non-post limb preserved and the post limb cut at a 4 mm distance from the knot provides with the best security. Sutures are safer than tapes in suture bridge.

Use of a locking stem for reverse shoulder arthroplasty is a rare but reliable option.

INTRODUCTION: RSA is widely used in the treatment of complex trauma or degenerative changes of the shoulder. Strong primary fixation of the stem is necessary to prevent any loosening of the stem and subsequent revision. Presently, cement fixation or press-fit fixation are two options for humeral fixation, though each has its own limitations and risks. The aim of the current study is to evaluate the effectiveness of an alternative option involving a distal screw interlocking system for fixation of the humeral stem from initial implantation. METHODS: We performed a retrospective multicenter study of patients implanted with the Humelock Reversed® stem RSA that can be locked with distal humeral screws in cases of operative poor press fit or to modulate the lengthening of the arm via prosthetic humeral height. Seventy-two patients with a minimum two year follow-up were included, 13 for acute trauma, 42 for degenerative changes, and 17 for revision surgery. RESULTS: No difference was seen in radiological or clinical results for patients with or without interlocking screw primary stabilization. For non-trauma patients, the mean raw Constant score improved significantly from 31 (± 12) to 71 (± 12). For trauma patients, the mean raw Constant score for trauma (63.4) was significantly lower than for non-trauma cases (72.1) (p < 0.001). Analysis of the filling ratio demonstrated that interlocking screws were not used for lower filling ratios and that midterm fixation of the stem is not negatively impacted by distal interlocking screw fixation. DISCUSSION: Even if use of a distal interlocking screw fixation system is rare, it can be useful for patients with poor quality fixation of stemmed RSA. CONCLUSION: Use of an interlocking screw system to stabilize the stem in RSA provides good immediate and midterm stability of the implant allowing for clinical and radiological outcomes comparable to those obtained with press-fit fixation alone.

99mTc-NTP 15-5 is a companion radiotracer for assessing joint functional response to sprifermin (rhFGF-18) in a murine osteoarthritis model.

With the emergence of disease modifying osteoarthritis drugs (DMOAD), imaging methods to quantitatively demonstrate their efficacy and to monitor osteoarthritis progression at the functional level are urgently needed. Our group showed that articular cartilage can be quantitatively assessed in nuclear medicine imaging by our radiotracer 99mTc-NTP 15-5 targeting cartilage proteoglycans. In this work, surgically induced DMM mice were treated with sprifermin or saline. We investigated cartilage remodelling in the mice knees by 99mTc-NTP 15-5 SPECT-CT imaging over 24 weeks after surgery, as wells as proteoglycan biochemical assays. OA alterations were scored by histology according to OARSI guidelines. A specific accumulation of 99mTc-NTP 15-5 in cartilage joints was evidenced in vivo by SPECT-CT imaging as early as 30 min post-iv injection. In DMM, 99mTc-NTP 15-5 accumulation in cartilage within the operated joints, relative to contralateral ones, was observed to initially increase then decrease as pathology progressed. Under sprifermin, 99mTc-NTP 15-5 uptake in pathological knees was significantly increased compared to controls, at 7-, 12- and 24-weeks, and consistent with proteoglycan increase measured 5 weeks post-surgery, as a sign of cartilage matrix remodelling. Our work highlights the potential of 99mTc-NTP 15-5 as an imaging-based companion to monitor cartilage remodelling in OA and DMOAD response.

Stemless Shoulder Arthroplasty.

Stemless humeral components for shoulder arthroplasty represent the fourth generation of modern prosthetic shoulder implants. Because of their metaphyseal fixation, the implantation technique is rather straightforward and preserves the humeral canal from violation. Substantial benefits have been highlighted with such a design, including less perioperative morbidity, independence from the proximal humeral anatomy, preservation of bone stock, ease of potential revision surgeries, and limited risk of complex periprosthetic fractures. Initially conceived to better re-create the center of rotation of the humeral head in anatomic arthroplasties, their use has been successfully extended to reverse total shoulder arthroplasty. Provided that contraindications are respected (eg, poor proximal humeral bone quality, proximal humerus fractures, patients who are elderly and/or overweight), short-term and midterm functional outcomes as well as postoperative complications appear to be similar to those of traditional stemmed implants, without increased risk of loosening of the humeral component.

Low healing rates and moderate functional outcome after arthroscopic superior capsular reconstruction using a porcine xenograft.

PURPOSE: In the absence of arthropathy, symptomatic massive irreparable rotator cuff tears contribute to a therapeutic challenge for orthopedic surgeons. The concept of superior capsular reconstruction (SCR) was introduced as an option for these challenging cases. The purposes of this study were to evaluate the clinical outcome scores when using a decellularized porcine xenograft and to evaluate the graft healing and incorporation. METHODS: A multicentric retrospective study of consecutive SCR's performed between 2016 and 2019 by four surgeons in four centers. Preoperative and postoperative Constant score, Subjective shoulder value (SSV) and Visual analog scale for pain (VAS) were recorded. Graft healing was evaluated by ultrasound or magnetic resonance imaging (MRI). RESULTS: A total of 28 shoulders were retrospectively analyzed with an average follow-up of 24 ± 9 months. One infection and four revisions (14%) to reversed shoulder arthroplasty (RSA) were reported at the final follow-up. The absolute Constant score showed a moderate, but significant improvement from 40 ± 12 to 57 ± 20 (P = 0.001). A significant improvement in pain scores was observed (P < 0.001). For patients undergoing SCR as a primary surgery, an average postoperative Constant score of 62 ± 16 was observed. This was in contrast to 43 ± 22 for patients who underwent SCR after failed rotator cuff repair. Although a strong trend in absolute differences was observed in regard to the Constant score, they did not reach statistical significance. For all other recorded outcome scores, a significant difference was reported between these groups. Graft healing was observed in (7/22) 30% of the patients. In the case of graft incorporation, an absolute constant score of 70 ± 9 was observed compared to 48 ± 21 in the graft failure group (P = 0.003). All cases with graft healing were considered to have a successful clinical outcome. This compared to only (7/15) 47% in the case of graft failure. CONCLUSIONS: In these series, SCR with a dermal xenograft successfully alleviated pain, but provided only a moderate improvement in functional outcome. In the case of graft healing, satisfactory clinical outcomes and patient satisfaction were observed. The present study indicates the benefit of performing SCR as a primary surgery, yet warns against using SCR as a salvage option for failed rotator cuff repair. In this group, the use of dermal xenografts is limited by the low healing rates and high complication rate. LEVEL OF EVIDENCE: IV. Retrospective case series, treatment study.

Impact of Collagen Crosslinking on Dislocated Human Shoulder Capsules-Effect on Structural and Mechanical Properties.

Classical treatments of shoulder instability are associated with recurrence. To determine whether the modification of the capsule properties may be an alternative procedure, the effect of crosslinking treatment on the structure and mechanical properties of diseased human shoulder capsules was investigated. Joint capsules harvested from patients during shoulder surgery (n = 5) were treated or not with UV and/or riboflavin (0.1%, 1.0% and 2.5%). The structure and the mechanical properties of the capsules were determined by atomic force microscopy. The effect of treatments on cell death was investigated. Collagen fibrils were well-aligned and adjacent to each other with a D-periodicity of 66.9 ± 3.2 nm and a diameter of 71.8 ± 15.4 nm in control untreated capsules. No effect of treatments was observed on the organization of the collagen fibrils nor on their intrinsic characteristics, including D-periodicity or their mean diameter. The treatments also did not induce cell death. In contrast, UV + 2.5% riboflavin induced capsule stiffness, as revealed by the increased Young's modulus values (p < 0.0001 for each patient). Our results showed that the crosslinking procedure changed the biomechanics of diseased capsules, while keeping their structural organisation unchanged at the single fibril level. The UV/riboflavin crosslinking procedure may be a promising way to preserve the functions of collagen-based tissues and tune their elasticity for clinically relevant treatments.

Allograft and autograft provide similar retear rates for the management of large and massive rotator cuff tears: a review and meta-analysis.

PURPOSE: Currently, autografts and allografts are largely used to treat large or massive rotator cuff tear (RCT), without any evidence in favour of one graft or the other. The purpose of this study was to determine the rate of retear of autograft and allograft in the treatment of large or massive posterosuperior RCT. METHOD: The PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines were followed to perform this systematic review and meta-analysis of the results in the literature as well as the presentation of results. A search of the literature was performed in the electronic databases MEDLINE, Scopus, Embase, and the Cochrane Library. The quality of the included studies was evaluated according to the MINORS (Methodological Index for Nonrandomized Studies) score. Inclusion criteria were studies in English evaluating clinical and radiological results of surgical treatment with autograft or allograft for large or massive RCT since 2008. The main criterion was the retear rate of the graft assessed on MRI or US scan at 1-year minimum follow-up. Partial tear were classified as "tear". RESULTS: The overall retear rate was 23.6% (15.5-32.7) at a mean follow-up of 18.4 ± 7.8 (12-36) months. There was no significant difference between the two kinds of graft, with a retear rate of 27.0% (15.4-40.2) and 20.9% (9.9-34.2) with autograft and allograft respectively (n.s.). Similar improvements of functional scores (+ 28.8 to 38.4 points for the Constant score, + 33.6 to 38.4 points for the ASES, and - 4.0 to - 4.1 points for pain-VAS) were reported in the two groups after at 27.2 ± 11.1 (12-48) months. The rate of complications except retear was 1.8% (0.2, 3.7) with autograft and 0.5% (0.8, 1.8) with allograft (n.s.). CONCLUSION: The use of autograft and allograft for the treatment of large or massive RCT leads to similar retear rate and clinical outcomes at short to medium terms. LEVEL OF EVIDENCE: Level IV.

The Hybridge Technique: A Combined Technique of Suture Bridge and Tension Band for an Arthroscopic Eco-Responsible Rotator Cuff Repair.

Arthroscopic rotator cuff repair is mainly based on 2 proven biomechanical concepts: suture bridge and tension band. This Technical Note describes the use of a combination of these 2 techniques to repair extensive lesions with only 3 anchors. Besides being less expensive, the use of a limited number of anchors is part of a global medicoeconomic and eco-responsible approach to our surgical activities.

The biomechanical effect of injury and repair of the inferior glenohumeral ligament on glenohumeral stability: Contribution of the posterior band.

BACKGROUND: Many surgical procedures are proposed to manage shoulder instability with recurrent dislocation but there is still a high rate of failure or complications. Repairs are often limited to anterior part of inferior glenohumeral ligament but some authors are reporting better clinical results if its posterior band is also repaired. This biomechanical study aimed to investigate the impact of a supplementary posterior injury compared with an isolated anterior injury and to analyze the contribution of a posterior repair of the inferior glenohumeral ligament compared with an isolated anterior repair. METHODS: Six fresh-frozen cadaveric shoulders were tested intact and after both anterior and posterior injuries and repairs of the inferior glenohumeral ligament. Shoulders were placed at 90° of humerothoracic elevation in scapular plane and 60° of external rotation. Joint stability was analyzed by successively applying anterior, posterior, inferior and superior glenohumeral displacements and measuring the resulting forces or by applying an anteroinferior loading and measuring three-dimensional head displacements. Maximal range of external rotation was also measured. FINDINGS: Combined anterior and posterior injuries of the inferior glenohumeral ligament were necessary to obtain significant instabilities in anterior and inferior directions. A complementary repair of the posterior band improved the biomechanical stability of the glenohumeral joint compared to an isolated anterior repair when anterior and posterior bands are injured. No reduction of external rotation was observed after repairs compared to intact condition. INTERPRETATION: These results show the biomechanical interest of this surgical procedure and contribute to document its relevance in clinical practice.

Superior capsular reconstruction - A systematic review and meta-analysis.

BACKGROUND: Since Mihata's 2012 proposal to arthroscopically reconstruct the superior capsule of patients with massive irreparable cuff tears, many studies have reported the clinical results of this technique using different types of grafts (fascia lata autograft, dermal allograft, porcine dermal xenograft or long head of biceps autograft). PURPOSE: The objective of this meta-analysis was to report the clinical and radiological results of these superior capsule reconstructions. METHODS: Preferred Reporting Items for Systematic Reviews and Meta-Analyzes (PRISMA) recommendations were used to conduct this systematic review. A bibliographic search was performed of the electronic databases MEDLINE, Scopus, Embase and the Cochrane Library. The quality of the studies was assessed according to the MINORS criterion (Methodological Index for Nonrandomized Studies). The inclusion criteria were studies in English evaluating superior capsular reconstruction. RESULTS: No level I or II studies met the inclusion criteria. Eighteen studies were selected from the 97 identified, including 637 shoulders (64% male) with a mean age of 62 years [95% CI: 60.3-63.5]. At the mean follow-up of 24.3 months (12-60), the range of motion was significantly increased from 82.6° [60.0-105.2] to 141.9° [109.9-173.8] in abduction, from 113.1° [98.3-127.9] to 153.3° [147.4-159.2] in elevation, from 35.5° [30.9-40.2] 43.4° [35.4-51.3] in external rotation and from 7.2 [5.4-9] to 9.9 [8.9-10.9] in internal rotation. Functional scores were significantly improved from 5.4 [4.8-5.9] to 1.3 [0.9-1.7] points for VAS, from 42.5 [15.7-69.3] to 59.3 [30.1-88.6] points for Constant, from 39.0% [38.1-39.8] to 79.8% [76.4-83.3] for the SSV, and from 48.2 [45.2-51.1] to 81.2 [77.2-85.1] points for the ASES. The healing rate was 76.1% [64.4-84.9]. The complication rate was 5.6% [1.8-16.3] and the reverse shoulder arthroplasty revision rate was 7.1% [3.8-12.8]. CONCLUSION: Superior capsule reconstructions allow satisfactory clinical and radiological results to be obtained at 2 years of follow-up. Due to the small number of high quality comparative studies available, its true place in the therapeutic arsenal cannot be fully confirmed. However, it seems that the best indication for this technique is isolated irreparable rupture of the supraspinatus, in cases of medical treatment failure. LEVEL OF EVIDENCE: III; meta-analysis of heterogeneous studies.