Multivariate Curve Resolution Methodology Applied to the ATR-FTIR Data for Adulteration Assessment of Virgin Coconut Oil.

Virgin coconut oil (VCO) is a functional food with important health benefits. Its economic interest encourages fraudsters to deliberately adulterate VCO with cheap and low-quality vegetable oils for financial gain, causing health and safety problems for consumers. In this context, there is an urgent need for rapid, accurate, and precise analytical techniques to detect VCO adulteration. In this study, the use of Fourier transform infrared (FTIR) spectroscopy combined with multivariate curve resolution-alternating least squares (MCR-ALS) methodology was evaluated to verify the purity or adulteration of VCO with reference to low-cost commercial oils such as sunflower (SO), maize (MO) and peanut (PO) oils. A two-step analytical procedure was developed, where an initial control chart approach was designed to assess the purity of oil samples using the MCR-ALS score values calculated on a data set of pure and adulterated oils. The pre-treatment of the spectral data by derivatization with the Savitzky-Golay algorithm allowed to obtain the classification limits able to distinguish the pure samples with 100% of correct classifications in the external validation. In the next step, three calibration models were developed using MCR-ALS with correlation constraints for analysis of adulterated coconut oil samples in order to assess the blend composition. Different data pre-treatment strategies were tested to best extract the information contained in the sample fingerprints. The best results were achieved by derivative and standard normal variate procedures obtaining RMSEP and RE% values in the ranges of 1.79-2.66 and 6.48-8.35%, respectively. The models were optimized using a genetic algorithm (GA) to select the most important variables and the final models in the external validations gave satisfactory results in quantifying adulterants, with absolute errors and RMSEP of less than 4.6% and 1.470, respectively.

Anticancer Drugs: Recent Strategies to Improve Stability Profile, Pharmacokinetic and Pharmacodynamic Properties.

In past decades, anticancer research has led to remarkable results despite many of the approved drugs still being characterized by high systemic toxicity mainly due to the lack of tumor selectivity and present pharmacokinetic drawbacks, including low water solubility, that negatively affect the drug circulation time and bioavailability. The stability studies, performed in mild conditions during their development or under stressing exposure to high temperature, hydrolytic medium or light source, have demonstrated the sensitivity of anticancer drugs to many parameters. For this reason, the formation of degradation products is assessed both in pharmaceutical formulations and in the environment as hospital waste. To date, numerous formulations have been developed for achieving tissue-specific drug targeting and reducing toxic side effects, as well as for improving drug stability. The development of prodrugs represents a promising strategy in targeted cancer therapy for improving the selectivity, efficacy and stability of active compounds. Recent studies show that the incorporation of anticancer drugs into vesicular systems, such as polymeric micelles or cyclodextrins, or the use of nanocarriers containing chemotherapeutics that conjugate to monoclonal antibodies can improve solubility, pharmacokinetics, cellular absorption and stability. In this study, we summarize the latest advances in knowledge regarding the development of effective highly stable anticancer drugs formulated as stable prodrugs or entrapped in nanosystems.

Exploring the anticancer and antioxidant properties of Vicia faba L. pods extracts, a promising source of nutraceuticals.

Background: Pulse crops are considered the major sources of proteins, dietary fiber, micronutrients, and bioactive phytochemicals. Among the numerous pulse crops, broad beans (Vicia faba L.) have received particular attention due to their nutraceutical, functional and economic importance. Our attention was mainly focused on the broad bean pods (VFs), which are the primary by-product of the domestic and industrial processing of broad beans and an attractive source of valuable ingredients. Methods: In order to investigate the VFs properties, the flours from broad beans of three different harvest periods were extracted with acetone, methanol and 70% aqueous ethanol and the dried extracts were analyzed, qualitatively and quantitatively, and tested for their antioxidant through DPPH and ABTS assay and anticancer activities using the MTT assay and immunofluorescence analysis. Results: The VF extracts demonstrated a good in vitro radical scavenging activity from the first stage of collection of all the V. faba L. extracts. Additionally, the extracts were tested for their cytotoxicity against a panel of cancer and normal cells and the outcomes indicated the ethanol extract as the most active against the melanoma cell line Sk-Mel-28, without affecting the viability of the normal cells. Finally, we found out that the ethanol extract interfered with the microtubules organization, leading to the cancer cells death by apoptosis.

Interaction of letrozole and its degradation products with aromatase: chemometric assessment of kinetics and structure-based binding validation.

Letrozole is one of the most prescribed drugs for the treatment of breast cancer in post-menopausal women, and it is endowed with selective peripheral aromatase inhibitory activity. The efficacy of this drug is also a consequence of its long-lasting activity, likely due to its metabolic stability. The reactivity of cyano groups in the letrozole structure could, however, lead to chemical derivatives still endowed with residual biological activity. Herein, the chemical degradation process of the drug was studied by coupling multivariate curve resolution and spectrophotometric methodologies in order to assess a detailed kinetic profile. Three main derivatives were identified after drug exposure to different degradation conditions, consisting of acid-base and oxidative environments and stressing light. Molecular docking confirmed the capability of these compounds to accommodate into the active site of the enzyme, suggesting that the sustained inhibitory activity of letrozole may be at least in part attributed to the degradation compounds.

Central retinal thickness fluctuations in patients treated with anti-VEGF for neovascular age related macular degeneration.

PURPOSE: This is a retrospective, single-center, non randomized interventional real life study, investigating the correlation between variability of central retinal thickness (CRT) and functional outcomes during 2 years of anti-VEGF therapy in patients treated for neovascular age related macular degeneration (nAMD). BACKGROUND: CRT fluctuations can depend on various factors such as the correct timing of injections, the therapeutic algorithm, and the number of injections (NI) performed; it is important to understand if CRT fluctuations are responsible for worse visual outcomes and consequently to identify the correct ways to avoid or reduce them. METHODS: Forty-one patients were treated for nAMD with aflibercept: 0.5 mg intravitreal aflibercept was administered every 4 weeks during the first 3 months, then bimonthly over the first year, and after the first year adopting a PRN regimen. Standard deviation of CRT (CRT/SD), BCVA, and NI were recorded. Correlation studies were performed by Pearson's test, Ancova, and Principal Component Analysis. RESULTS: A negative correlation was found between CRT/SD and final BCVA. In patients who lost more than 15 letters, CRT/SD mean was significantly higher in comparison with patients who lost less than 15 letters. Patients with final BCVA >65 letters showed lower CRT/SD values compared to patients with final BCVA ⩽65 letters. Multivariate analysis confirmed that in patients with higher baseline BCVA, improvement of BCVA was correlated to NI, and lower values of CRT fluctuations were observed. CONCLUSIONS: CRT fluctuations, even after an appropriate NI given per year, significantly influence BCVA; a proactive treatment algorithm appears crucial when treating patients with nAMD.

Coupling of spectrometric, chromatographic, and chemometric analysis in the investigation of the photodegradation of sulfamethoxazole.

A workflow is proposed for the study of the photodegradation process of the sulfamethoxazole (SMX) based on the combination of different experimental techniques, including liquid chromatography, mass spectrometry, UV-Visible spectrophotometry, and the treatment of all the analytical data with advanced chemometric methods. SMX, which is one of the most widely used antibiotics worldwide and has been found at remarkable concentrations in various rivers and effluents over all Europe, was degraded in the laboratory under a controlled source of UV radiation, which simulates the environmental solar radiation (Suntest). Kinetic monitoring of the photodegradation process was performed using UV-Visible spectrophotometric measurements and by further Liquid Chromatography with Diode Array Detector and Mass Spectrometry analysis (LC-DAD-MS). Additionally, the acid-base properties were also investigated to see how the pH can affect the speciation of this substance during the photodegradation process. Based on the Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) application, the proposed chemometric method coped with the large amounts of data generated by the different analytical techniques used to monitor the evolution of the photodegradation process. Their simultaneous analysis involved applying a data fusion strategy and an advanced MCR-ALS constrained analysis, which allowed and improved the description of the complete degradation process, detecting the different species of the reaction, and identifying the possible transformation products formed. A total number of six species were resolved in the degradation process of SMX. In addition to the initial SMX, a second species corresponded to a conformational isomer, and the other four species represented different photoproducts, which have also been identified. Furthermore, three different acid-base species of SMX were obtained, and their pKa values were estimated.

Photodegradation of Anti-Inflammatory Drugs: Stability Tests and Lipid Nanocarriers for Their Photoprotection.

The present paper provides an updated overview of the methodologies applied in photodegradation studies of non-steroidal anti-inflammatory drugs. Photostability tests, performed according to international standards, have clearly demonstrated the photolability of many drugs belonging to this class, observed during the preparation of commercial forms, administration or when dispersed in the environment. The photodegradation profile of these drugs is usually monitored by spectrophotometric or chromatographic techniques and in many studies the analytical data are processed by chemometric procedures. The application of multivariate analysis in the resolution of often-complex data sets makes it possible to estimate the pure spectra of the species involved in the degradation process and their concentration profiles. Given the wide use of these drugs, several pharmaceutical formulations have been investigated to improve their photostability in solution or gel, as well as the pharmacokinetic profile. The use of lipid nanocarriers as liposomes, niosomes or solid lipid nanoparticles has demonstrated to both minimize photodegradation and improve the controlled release of the entrapped drugs.

Toward Multitasking Pharmacological COX-Targeting Agents: Non-Steroidal Anti-Inflammatory Prodrugs with Antiproliferative Effects.

The antitumor activity of certain anti-inflammatory drugs is often attributed to an indirect effect based on the inhibition of COX enzymes. In the case of anti-inflammatory prodrugs, this property could be attributed to the parent molecules with mechanism other than COX inhibition, particularly through formulations capable of slowing down their metabolic conversion. In this work, a pilot docking study aimed at comparing the interaction of two prodrugs, nabumetone (NB) and its tricyclic analog 7-methoxy-2,3-dihydro-1H-cyclopenta[b]naphthalen-1-one (MC), and their common active metabolite 6-methoxy-2-naphthylacetic acid (MNA) with the COX binding site, was carried out. Cytotoxicity, cytofluorimetry, and protein expression assays on prodrugs were also performed to assess their potential as antiproliferative agents that could help hypothesize an effective use as anticancer therapeutics. Encouraging results suggest that the studied compounds could act not only as precursors of the anti-inflammatory metabolite, but also as direct antiproliferative agents.

Use of Pluronic Surfactants in Gel Formulations of Photosensitive 1,4-Dihydropyridine Derivatives: A Potential Approach in the Treatment of Neuropathic Pain.

1,4-Dihydropyridines (DHPs) are the most important class of L-type calcium channel blockers that are employed for the treatment of cardiovascular diseases, particularly hypertension. Various modifications on this scaffold lead to the discovery of new DHPs blocking different types of calcium channels. Among them, the T-type calcium channel has recently attracted great interest due to its role in chronic pain conditions. In this study, we selected three newly synthesized DHPs (HM8, HM10 and MD20) with different selectivity profiles to the T-type calcium channel and formulated them in micellar solutions and micellar-in-gel matrices to be tested for potential topical use in the treatment of neuropathic pain. To prevent the well-known sensitivity to light of the DHPs, the studied compounds were entrapped in colloidal aggregates obtained by using edible Pluronic® surfactants and adding α-tocopherol as an antioxidant. All the prepared formulations were exposed to stressing light, according to international rules. Along with the degradation experiments, the concentrations of the parent compounds and by-products were calculated by multivariate curve resolution-alternating least squares (MCR-ALS) applied to the spectral data. The defined formulations proved suitable as light-stable matrices for the DHP compounds, showing an increase in stability for HM8 and MD20 and an almost complete photoprotection for HM10, compared to ethanol solutions and standard gel formulations.

Gel Formulation of Nabumetone and a Newly Synthesized Analog: Microemulsion as a Photoprotective Topical Delivery System.

Photostability studies were performed on topical formulations containing the anti-inflammatory drug Nabumetone and an analog newly synthesized in order to achieve better photostability and pharmacokinetic profile. Stability tests, according to the International Conference on Harmonization rules, were applied on ethanol solutions and topical gel formulations of both compounds. The photodegradation profiles were monitored by Multivariate curve resolution applied to the UV spectral data. The inclusion of the compounds in microemulsion was investigated to improve light stability and, at the same time, to ensure a sustained release system for skin delivery. All the formulations in solution, gel, microemulsion, and microemulsion-in-gel were exposed to a forced irradiation of 350 W/m2, corresponding to a 21 kJ/m2 min, for up to 300 min. Photostability increased significantly for both drugs in the liquid microemulsion and microemulsion-in-gel, compared to the ethanol solution and plain gel, reaching a residual drug of 97% and 98% for Nabumetone and analog in microemulsion-in-gel, respectively. Permeation experiments on the microemulsion-in-gel showed a better performance of the analog formulated at 0.2%, compared to the same formulation of Nabumetone at 0.7%. These results highlight the potential of the designed matrices as delayed drug delivery systems along with the use of lower drug doses leading to reduced side effects.

Photostability study of multicomponent drug formulations via MCR-ALS: The case of the hydrochlorothiazide-amiloride mixture.

The kinetics and photodegradation mechanism of the pharmaceutical mixture of hydrochlorothiazide (HCT) and amiloride (AML) has been studied in depth using a chemometric approach. Water solutions of HCT and AML, separately or in binary mixtures, were irradiated with forced light at different pH values (3, 7, 9 and 12). Multivariate Curve Resolution - Alternating Least Squares (MCR-ALS) modelling has been applied to the experimental data recorded by UV spectrophotometry and HPLC-UV/MS. 78 data sets were collected and their chemometric processing has allowed the simultaneous determination of the behaviour of the two drugs in the mixture when exposed to light and the dependence of their photodegradation kinetics on pH. MCR-ALS has been applied using three different implementations. Soft-MCR-ALS and hybrid Hard/Soft-MCR-ALS have been used to resolve the experimental data and to get the equilibrium and kinetic parameters of the investigated chemical processes. A third implementation of the MCR-ALS method has been used in the analysis of the incomplete data sets obtained when UV spectrophotometric and HPLC-UV/MS data were simultaneously analysed, using a row- and column-wise incomplete augmented data matrix arrangement. In these matrices, information from HPLC-UV detector was used as a bridge between the data recorded by UV spectrophotometry (acid-base and kinetic reactions monitoring) and the data obtained by HPLC-MS.

Evaluation of human breastmilk adulteration by combining Fourier transform infrared spectroscopy and partial least square modeling.

A two-step chemometric procedure was developed on the attenuated total reflection-Fourier transform infrared data of human breastmilk to detect adulteration by water or cow milk. The samples, collected from a Milk Bank, were analyzed before and after adulteration with whole, skimmed, semi-skimmed cow milk and water. A preliminary clustering via principal component analysis distinguished three classes: pure milk, milk adulterated with water, and milk adulterated with cow milk. A first partial least square-discriminant analysis (PLS-DA) classification model was built and then applied on new samples to identify the specific adulterants. The external validation on this model reached 100% of the correct identification of pure milk and 90% of the type of adulterants. In the following step, four PLS calibration models were built to quantify the amount of the adulterant detected in the classification analysis. The prediction performance of these models on new samples showed satisfactory parameters with root mean square error of prediction and percentage relative error lower than 1.38% and 3.31%, respectively.

Reverse Transcriptase Inhibitors Nanosystems Designed for Drug Stability and Controlled Delivery.

An in-depth analysis of nanotechnology applications for the improvement of solubility, distribution, bioavailability and stability of reverse transcriptase inhibitors is reported. Current clinically used nucleoside and non-nucleoside agents, included in combination therapies, were examined in the present survey, as drugs belonging to these classes are the major component of highly active antiretroviral treatments. The inclusion of such agents into supramolecular vesicular systems, such as liposomes, niosomes and lipid solid NPs, overcomes several drawbacks related to the action of these drugs, including drug instability and unfavorable pharmacokinetics. Overall results reported in the literature show that the performances of these drugs could be significantly improved by inclusion into nanosystems.

Photo and thermal stress of linseed oil and stabilization strategies.

The thermal and light stability of linseed oil has been studied by monitoring the concentrations of fatty acids and lignans, as main nutraceutical components. Linseed oil was subjected to stressing light and temperature conditions, in accordance with the ICH international rules, and monitored by UV-vis spectroscopy and HPLC-DAD. The change of UV spectra along the photodegradation tests, setting the irradiation power at 350 W/m2, confirmed a significant overall sensitivity of linseed oil to light. At the same time, the HPLC determination of the major fatty acids showed a marked variation in their concentration up to a residual concentration of 62.3 and 67.2% for α-linolenic and linoleic acid, respectively, after 18 h. In contrast, thermal tests at 60 °C showed some stability, with a concentration of residual fatty acids in the range 82-95% after 48 h. The examined lignans showed significant stability when exposed to both light and heat. Several photoprotection approaches have been also studied to increase the photostability of linseed oil. A significant increase in the stability of fatty acids has been observed using amber glass containers or ascorbic acid or by combining the two protection factors.

1,4-Dihydropyridine Antihypertensive Drugs: Recent Advances in Photostabilization Strategies.

The 1,4-dihydropyridine (DHP) drugs are nowadays the most used drugs in the treatment of hypertension. However, all the structures in this series present a significant sensitivity to light, leading to the complete loss of pharmacological activity. This degradation is particularly evident in aqueous solution, so much so that almost all DHP drugs on the market are formulated in solid preparations, especially tablets. The first and main process of photodegradation consists in the aromatization of the dihydropyridine ring, after which secondary processes can take place on the various substituents. A potential danger can result from the formation of single oxygen and superoxide species that can in turn trigger phototoxic reactions. Several strategies for the photostabilisation of DHP drugs have been proposed in recent years, in particular with the aim to formulate these drugs in liquid preparations, as well as to limit any toxicity problems related to light degradation. This review summarizes and describes the main aspects of the studies conducted in recent years to obtain photostable formulations of DHP drugs.

A New Generation of Dihydropyridine Calcium Channel Blockers: Photostabilization of Liquid Formulations Using Nonionic Surfactants.

: The stability profile of a new 1,4-dihydropyridine derivative (DHP), representative of a series with a hexahydroquinoline ring, was studied to design light-stable liquid formulations. This molecule, named M3, has been shown among the analogs to have a high capacity to block both L- and T-type calcium channels. The ethanol solution of the drug was subjected to a photodegradation test, in accordance with standard rules. The concentrations of the drug and its byproducts were estimated using multivariate curve resolution, applied to the spectral data collected during the test. The improvement of both the photostability and water solubility of M3 was investigated by adding the surfactant polysorbate 20 in a 1:5 ratio to aqueous solutions of the drug. These formulations were exposed to stressing light in containers of bleu polyethylene terephthalate (PET), amber PET, and covered amber PET. The best results were obtained when using the covered amber PET container, reaching a degradation percentage of the drug less than 5% after 12 h under an irradiance power of 450 W/m². The stability of the compound was compared to that of nimodipine (NIM) under the same conditions.

Benzopyrroloxazines containing a bridgehead nitrogen atom as promising scaffolds for the achievement of biologically active agents.

The present review lists the papers and patents dealing with the class of polycondensed heterocycles called benzopyrroloxazines published in the last decades. The survey is limited to substances characterized by the presence of a bridgehead N atom, which means that the present N atom serves to connect different rings within the same molecule. In the case of benzopyrroloxazines, the bridgehead N atom belongs at the same time to the pyrrole and oxazine rings. All other compounds not possessing this feature were kept out accordingly. Relevant synthetic methods to such compounds have been outlined. Many different biological properties have been attributed to several functionalized derivatives of these heterocycles and cited within the review.

Bioanalytical assay for the quantification of the ALK inhibitor lorlatinib in mouse plasma using liquid chromatography-tandem mass spectrometry.

A bio-analytical assay for the first third generation ALK inhibitor lorlatinib in mouse plasma was developed and validated. Ten-µl plasma samples were prepared by adding rucaparib as the internal standard and precipitation of the plasma proteins. For LC-MS/MS analysis, compounds were eluted at 0.5 mL/min and separated on a 3-µm particle-size, polar embedded octadecyl silica column by gradient elution using 0.1% of formic acid (in water) and methanol. Compounds were monitored with positive electrospray ionization using a triple quadrupole mass spectrometer in selected reaction monitoring mode. The assay was fully validated in the 2-2000 ng/mL calibration range. Within-day (8.0-11.6%) and between-day (10.0-15.0%) precisions and accuracies (99.0-113.3%) were within acceptable range. Plasma samples were deemed stable for 6 h at ambient temperature, during three freeze-thaw cycles and for 2 months at -30 °C. Finally, the new assay was applied successfully to pilot pharmacokinetic studies in male and female wild-type mice.

Photosensitive drugs: a review on their photoprotection by liposomes and cyclodextrins.

Nowadays, an exciting challenge in the drug chemistry and technology research is represented by the development of methods aimed to protect molecular integrity and therapeutic activity of drugs from effects of light. The photostability characterization is ruled by ICH (The International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use), which releases details throughout basic protocols of stability tests to be performed on new medicinal products for human use. The definition of suitable photoprotective systems is fundamental for pharmaceutical manufacturing and for human healthy as well, since light exposure may affect either drugs or drug formulations giving rise even to allergenic or mutagenic by-products. Here, we summarize and discuss the recent studies on the formulation of photosensitive drugs into supramolecular systems, capable of entrapping the molecules in a hollow of their structure by weak noncovalent interactions and protecting them from light. The best known supramolecular matrices belong to the 'auto-assembled' structures, of which liposomes are the most representative, and the 'host-guest' systems, of which cyclodextrins represent the most common 'host' counterpart. A relevant number of papers concerning the use of both liposomes and cyclodextrins as photoprotection systems for drugs has been published over the last 20 years, demonstrating that this topic captures interest in an increasing number of researchers.

Light-sensitive drugs in topical formulations: stability indicating methods and photostabilization strategies.

Photostability tests applied on commercial specialties for topical use have demonstrated a greater vulnerability of several drugs, due to greater exposure to light than other pharmaceutical forms. Photodegradation of a drug can considerably modify its pharmacokinetic behavior by varying the therapeutic index. The evaluation of the degradation profile of a drug, according to the ICH rules, is of primary importance in developing an appropriate topical formulation. Advanced strategies have been proposed to increase the protection from the light of the photolabile drugs. Supramolecular systems have been investigated to improve both pharmacokinetic profile and photostability. In this review, the more recent stability-monitoring methods for the analysis of drugs in topical formulations are collected and the main approaches for the drug photostabilization are discussed.