Investigating the Chemical Profile of Underexplored Parts of Dipteryx alata (Baru) Using the PS-MS Technique.

The baru (Dipteryx alata Vog.), a fruit native to the Cerrado biome, is well-known for its almonds, which are extensively exploited and exported. Unfortunately, the remaining parts of this fruit are often discarded. This study investigates the fixed chemical constituents of the baru, including the bark, pulp, endocarp, and almonds, using the PS-MS technique in positive and negative ionization modes. Notably, this research presents the first chemical profile of baru almonds in both their raw and roasted states. The analysis identified 57 compounds reported for the first time in a baru and 24 common compounds. The majority of these compounds are classified as flavonoids. In both ionization modes, the peel exhibited a higher proportion of phenolic compounds, although the chemical compounds varied among the peel, pulp, almond, and endocarp. These findings highlight the perspective of bioeconomy and biotechnology. By staggering baru fruit production alongside extractivists, we can optimize the utilization of all parts of the fruit. Furthermore, given the knowledge of the biological properties of flavonoids and the baru composition, we recommend additional studies to analyze their potential in preventing chronic non-communicable diseases.

Cross-cultural validation and Spanish translation of the Boston Interview to evaluate severely obese patients seeking metabolic/bariatric surgery.

INTRODUCTION: obesity is a global health problem. Metabolic/Bariatric surgery (MBS) has proven to be one of the most effective methods for treating the most severe forms. However, a thorough evaluation and preparation of people seeking MBS is necessary. In Spain, there are no standardized interviews to carry out the psychosocial assessment of people seeking MBS. The Boston Interview for MBS (BIBS) is a recognized and flexible tool to evaluate the psychosocial factors. OBJECTIVE: to present the process of translation into Spanish and cross-cultural adaptation of the BIBS. MATERIALS AND METHODS: the reverse translation procedure was followed. To validate the translation, a multidisciplinary group of experts was formed. They were asked to rate the clarity of wording and cultural adaptation of the translation items. In addition, the translated interview was used to evaluate 173 patients seeking MBS who rated their satisfaction with the interview experience. RESULTS: the evaluation of the translation by a group of experts was favorable (global mode and median were 3-excellent, IQR of 1). The overall percentage agreement of the adequacy of "cultural adaptation" of the text was 85.8 % (95 % CI, 0.784, 0.932) and of the "clarity of wording" was 84.7 % (95 % CI, 0.7644; 0.9286). Furthermore, it was well accepted by the majority of the patients interviewed (p(50) 10 out of 10). CONCLUSIONS: the Spanish translation of the BIBS is available for the assessment of Spanish-speaking people seeking MBS. It was rated as having good fidelity to the original English version, and was deemed highly satisfactory by patients.

FIFA 11+ KIDS in the prevention of soccer injuries in children: a systematic review.

BACKGROUND: The "FIFA 11+" is an injury prevention program conceived for soccer athletes aged over 14. The use of FIFA 11+ Kids in soccer was associated with a reduction of the overall risk of injuries in children by 48%, and of 74% for serious injuries. However, to the best of our knowledge, a systematic review of the literature on the effects of FIFA 11+ Kids is still missing. Therefore, a systematic review was conducted to ascertain the benefits of the "FIFA 11+ KIDS" program in children who practice soccer. METHODS: This systematic review was conducted according to the PRISMA recommendations and prospectively registered in PROSPERO. The electronic search was conducted in the following databases: Web of Science, PubMed, Medline via Ovid, EMBASE and SportDiscuss via EBSCO. Database searches were performed in January 2024. This review included studies that evaluated the effects of the "FIFA 11+ KIDS" program. Eligible studies had to describe program implementation and the mean age of the children. RESULTS: A total of 11 articles were included in this systematic review from a pool of 8513 articles screened across various databases. These articles involved over 10,000 young participants from 8 countries, primarily aged 7-14 years, with the majority being soccer athletes. Study quality varied, with four categorized as high, four as good, and three as fair quality. Objectives varied across studies, with four focusing on FIFA 11+ Kids' efficacy in injury prevention, five examining its impact on performance and physical abilities, and two assessing its effects on children's focus and attention skills. Notably, injury prevention studies reported around a 50% reduction in overall injuries and nearly 60% in severe injuries, with a dose-response relationship observed with increased weekly sessions. Significant improvements were noted in physical and functional tests such as the Y balance, jump tests, and various soccer skills, along with positive effects on children's focus and attention, as indicated by 13-18% improvements in Attention Scale for Elementary School Children (ASESC) scores. CONCLUSION: The FIFA 11+ KIDS injury prevention program appears to be effective in reducing injuries in young football players. This can positively influence player and team overall performance and might support the long-term athlete development of these young athletes. These findings highlight the importance and necessity of injury prevention in young athletes.

A deep learning approach based on graphs to detect plantation lines.

Identifying plantation lines in aerial images of agricultural landscapes is re-quired for many automatic farming processes. Deep learning-based networks are among the most prominent methods to learn such patterns and extract this type of information from diverse imagery conditions. However, even state-of-the-art methods may stumble in complex plantation patterns. Here, we propose a deep learning approach based on graphs to detect plantation lines in UAV-based RGB imagery, presenting a challenging scenario containing spaced plants. The first module of our method extracts a feature map throughout the backbone, which consists of the initial layers of the VGG16. This feature map is used as an input to the Knowledge Estimation Module (KEM), organized in three concatenated branches for detecting 1) the plant positions, 2) the plantation lines, and 3) the displacement vectors between the plants. A graph modeling is applied considering each plant position on the image as vertices, and edges are formed between two vertices (i.e. plants). Finally, the edge is classified as pertaining to a certain plantation line based on three probabilities (higher than 0.5): i) in visual features obtained from the backbone; ii) a chance that the edge pixels belong to a line, from the KEM step; and iii) an alignment of the displacement vectors with the edge, also from the KEM step. Experiments were conducted initially in corn plantations with different growth stages and patterns with aerial RGB imagery to present the advantages of adopting each module. We assessed the generalization capability in the other two cultures (orange and eucalyptus) datasets. The proposed method was compared against state-of-the-art deep learning methods and achieved superior performance with a significant margin considering all three datasets. This approach is useful in extracting lines with spaced plantation patterns and could be implemented in scenarios where plantation gaps occur, generating lines with few-to-no interruptions.

Mycosis fungoides refractory to treatment - importance of a multidisciplinary approach.

We report a case of difficult-to-control mycosis fungoides (MF), where the role of the dental surgeon was crucial for the control and prognosis of the disease. A 62-year-old female patient diagnosed with MF had a previous record of red patches and small raised bumps on the face, along with a cancerous growth in the cervical and vulvar region. The patient was initially treated with methotrexate and local radiotherapy without resolution. Chemotherapy with cyclophosphamide, doxorubicin, vincristine, and prednisone was then started (CHOP protocol). The dental team of a reference hospital was consulted to evaluate swelling in the anterior region of the palate, which had been developing for two months, reporting discomfort when eating. The role of the dentistry team was fundamental in the differential diagnosis of oral lesions with dental infections, second neoplasia, or even a new site of disease manifestation, in addition to controlling mucosal changes resulting from chemotherapy. After ruling out dental infection, the dentistry team performed a lesion biopsy to confirm the diagnosis. The histopathological and immunohistochemical analysis showed atypical lymphoid infiltration of T cells (CD3+/CD4+/CD7-/CD8-), coexpression of CD25, and presence of CD30 cells, corresponding to the finding for MF. Identifying CD30 + allowed for a new chemotherapy protocol with brentuximab vedotin (BV) combined with gemcitabine. This protocol effectively controlled MF, which previous protocols had failed to do. The diagnosis by the dental team was essential for therapeutic change and improvement of the patient's clinical condition without the need for invasive medical procedures.

Alteration of gene expression and protein solubility of the PI 5-phosphatase SHIP2 are correlated with Alzheimer's disease pathology progression.

A recent large genome-wide association study has identified EGFR (encoding the epidermal growth factor EGFR) as a new genetic risk factor for late-onset AD. SHIP2, encoded by INPPL1, is taking part in the signalling and interactome of several growth factor receptors, such as the EGFR. While INPPL1 has been identified as one of the most significant genes whose RNA expression correlates with cognitive decline, the potential alteration of SHIP2 expression and localization during the progression of AD remains largely unknown. Here we report that gene expression of both EGFR and INPPL1 was upregulated in AD brains. SHIP2 immunoreactivity was predominantly detected in plaque-associated astrocytes and dystrophic neurites and its increase was correlated with amyloid load in the brain of human AD and of 5xFAD transgenic mouse model of AD. While mRNA of INPPL1 was increased in AD, SHIP2 protein undergoes a significant solubility change being depleted from the soluble fraction of AD brain homogenates and co-enriched with EGFR in the insoluble fraction. Using FRET-based flow cytometry biosensor assay for tau-tau interaction, overexpression of SHIP2 significantly increased the FRET signal while siRNA-mediated downexpression of SHIP2 significantly decreased FRET signal. Genetic association analyses suggest that some variants in INPPL1 locus are associated with the level of CSF pTau. Our data support the hypothesis that SHIP2 is an intermediate key player of EGFR and AD pathology linking amyloid and tau pathologies in human AD.

Updated Toolbox for Assessing Neuronal Network Reconstruction after Cell Therapy.

Cell therapy has proven to be a promising treatment for a range of neurological disorders, including Parkinson Disease, drug-resistant epilepsy, and stroke, by restoring function after brain damage. Nevertheless, evaluating the true effectiveness of these therapeutic interventions requires a deep understanding of the functional integration of grafted cells into existing neural networks. This review explores a powerful arsenal of molecular techniques revolutionizing our ability to unveil functional integration of grafted cells within the host brain. From precise manipulation of neuronal activity to pinpoint the functional contribution of transplanted cells by using opto- and chemo-genetics, to real-time monitoring of neuronal dynamics shedding light on functional connectivity within the reconstructed circuits by using genetically encoded (calcium) indicators in vivo. Finally, structural reconstruction and mapping communication pathways between grafted and host neurons can be achieved by monosynaptic tracing with viral vectors. The cutting-edge toolbox presented here holds immense promise for elucidating the impact of cell therapy on neural circuitry and guiding the development of more effective treatments for neurological disorders.

Pre- and Postharvest Strategies for Pleurotus ostreatus Mushroom in a Circular Economy Approach.

Mushroom cultivation presents a viable solution for utilizing agro-industrial byproducts as substrates for growth. This process enables the transformation of low-economic-value waste into nutritional foods. Enhancing the yield and quality of preharvest edible mushrooms, along with effectively preserving postharvest mushrooms, stands as a significant challenge in advancing the industry. Implementing pre- and postharvest strategies for Pleurotus ostreatus (Jacq.) P. Kumm (oyster mushroom) within a circular economy framework involves optimizing resource use, minimizing waste, and creating a sustainable and environmentally friendly production system. This review aimed to analyze the development and innovation of the different themes and trends by bibliometric analysis with a critical literature review. Furthermore, this review outlines the cultivation techniques for Pleurotus ostreatus, encompassing preharvest steps such as spawn production, substrate preparation, and the entire mushroom growth process, which includes substrate colonization, fruiting, harvesting, and, finally, the postharvest. While novel methodologies are being explored for maintaining quality and extending shelf-life, the evaluation of the environmental impact of the entire mushroom production to identify areas for improvement is needed. By integrating this knowledge, strategies can be developed for a more sustainable and circular approach to Pleurotus ostreatus mushroom cultivation, promoting environmental stewardship and long-term viability in this industry.

The First Records of the In Silico Antiviral and Antibacterial Actions of Molecules Detected in Extracts of Algerian Fir (Abies numidica De Lannoy) Using LC-MS/MS Analysis.

(1) Background: Due to the wide application in medicinal and pharmaceutical chemistry of flavonoid molecules, which are one of the most famous types of secondary plant metabolites, our work has come within the framework of bio-consulting to help in the identification of the molecule(s) responsible for the antibacterial effect which will be the active principle of a natural antibiotic developed from Algerian fir using bioinformatics tools. (2) Methods: The docking method was used to test the antiviral activity on SARS-CoV-2 virus and the antibacterial activity on Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli of 12 polyphenolic molecules present in the ethyl acetate and n-butanol extracts of Numidian fir leaves, and identify the molecules responsible for these specific biological activities. (3) Results: The findings revealed that it is possible that two molecules, hyperoside and quercitrin, have a high capacity to inhibit SARS-CoV-2, and it is important to mention that they are the most quantitatively abundant molecules in the extract. The molecule luteolin-7-glucoside is probably responsible for the antibacterial activity in the extract against Gram-negative bacteria such as Escherichia coli, and the molecule hesperidin is responsible for the antibacterial activity in the extract against Gram-positive bacteria such as Staphylococcus aureus.

Validity and reliability of My Jump 2® app to measure the vertical jump on elite women beach volleyball players.

Purpose: The aim of this study was to assess the reliability and validity of the My Jump 2® app in measuring jump height, flight time, and peak power among elite women beach volleyball players on sand surfaces. Methods: Eleven elite female beach volleyball players (aged 23.6 ± 6.2 years; weight 66.3 ± 5.8 kg; height 174.4 ± 5.8 cm; with 8.4 ± 4.8 years of professional experience) participated in this study. Each player performed six countermovement jumps in a wooden box filled with sand on a force platform while simultaneously recording a video for subsequent analysis using the My Jump 2® app. Results: We found excellent agreement for flight time, jump height and peak power between observers (ICC = 0.92, 0.91 and 0.97, respectively). No significant differences between force platform and My Jump 2® app were detected in the values obtained for the three variables (P > 0.05). For the force platform and the My Jump 2® app, we found a good agreement measuring jump height and flight time (ICC = 0.85 and 0.85, respectively). However, we only found a moderate agreement for peak power (ICC = 0.64). The difference in jump height showed a limit of agreement between -4.10 and 4.74 cm in Bland-Altman, indicating a high level of agreement between the two measurement tools. Conclusion: Based on our findings, the My Jump 2® app reveals a valid tool for measuring jump height and flight time of CMJ on sand surfaces. However, more caution is needed when measuring peak power.

An update on susceptibility-weighted imaging in brain gliomas.

Susceptibility-weighted imaging (SWI) has become a standard component of most brain MRI protocols. While traditionally used for detecting and characterising brain hemorrhages typically associated with stroke or trauma, SWI has also shown promising results in glioma assessment. Numerous studies have highlighted SWI's role in differentiating gliomas from other brain lesions, such as primary central nervous system lymphomas or metastases. Additionally, SWI aids radiologists in non-invasively grading gliomas and predicting their phenotypic profiles. Various researchers have suggested incorporating SWI as an adjunct sequence for predicting treatment response and for post-treatment monitoring. A significant focus of these studies is on the detection of intratumoural susceptibility signals (ITSSs) in gliomas, which are indicative of microhemorrhages and vessels within the tumour. The quantity, distribution, and characteristics of these ITSSs can provide radiologists with more precise information for evaluating and characterising gliomas. Furthermore, the potential benefits and added value of performing SWI after the administration of gadolinium-based contrast agents (GBCAs) have been explored. This review offers a comprehensive, educational, and practical overview of the potential applications and future directions of SWI in the context of glioma assessment. CLINICAL RELEVANCE STATEMENT: SWI has proven effective in evaluating gliomas, especially through assessing intratumoural susceptibility signal changes, and is becoming a promising, easily integrated tool in MRI protocols for both pre- and post-treatment assessments. KEY POINTS: • Susceptibility-weighted imaging is the most sensitive sequence for detecting blood and calcium inside brain lesions. • This sequence, acquired with and without gadolinium, helps with glioma diagnosis, characterisation, and grading through the detection of intratumoural susceptibility signals. • There are ongoing challenges that must be faced to clarify the role of susceptibility-weighted imaging for glioma assessment.

Influence of the Different Maturation Conditions of Cocoa Beans on the Chemical Profile of Craft Chocolates.

Cocoa beans (Theobroma cacao L.) can be used for craft chocolate production, which arouses consumer interest due to their perceived better quality. This study aimed to evaluate the chemical profile of 80% artisanal chocolate samples produced with cocoa beans subjected to different maturation conditions. In the first maturation process, beans were matured under no-oxygen conditions, and in the second, the toasted beans were matured in oak barrels. The volatile compounds of the chocolate samples were extracted by the solid-phase microextraction method in headspace mode and analyzed by gas chromatography/mass spectrometer. The non-volatile compounds were extracted with methanol and analyzed through paper spray mass spectrometry. Overall, 35 volatile compounds belonging to different chemical classes (acids, alcohols, aldehydes, ketones, esters, and pyrazines) were identified, such as propanoic acid and butane-2,3-diol. In addition, 37 non-volatile compounds, such as procyanidin A pentoside and soyasaponin B, were listed. Tannins, flavonoids, and phenylpropanoids were the main chemical classes observed, varying between the two samples analyzed. Therefore, it was possible to verify that maturation conditions affected the metabolomic profile of the 80% artisanal chocolate samples, being able to influence the sensory characteristics and bioactive compounds profile. Given these results, the sensory evaluation of these chocolates is suggested as the next step.

Evaluation of surface roughness, wettability and adhesion of multispecies biofilm on 3D-printed resins for the base and teeth of complete dentures.

OBJECTIVE: This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). METHODOLOGY: Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). RESULTS: The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. CONCLUSION: The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

Hemophagocytic Lymphohistiocytosis (HLH) Flare Following the COVID-19 Vaccine: A Case Report.

Hemophagocytic lymphohistiocytosis (HLH) is a rare hyperinflammatory state that leads to overactivation of the immune system due to underlying disease. It can lead to multiorgan failure and death if not treated properly. HLH after vaccination is rare but has been reported in a few cases. Here, we present a case of a patient who developed HLH after she received the COVID-19 vaccine. Workup was done to find the underlying cause of her symptoms. However, as all investigations yielded negative results, the close temporal association with the COVID-19 vaccine suggested that the vaccine might have been the causative factor. She was treated appropriately with steroids and discharged with follow-up appointments. The exact pathogenesis of HLH caused by COVID vaccine is unknown, but it is likely related to the inflammatory response caused by the vaccine in the body. The treatment of HLH depends on the treatment of underlying conditions causing the HLH. Very few cases have been reported in the literature regarding HLH caused by COVID vaccine. Immediate recognition and treatment are imperative for improved prognosis and improved chances of survival.

Environmental Exposure to Persistent Organic Pollutants and Its Association with Endometriosis Risk: Implications in the Epithelial-Mesenchymal Transition Process.

We aimed to explore the relationship of adipose tissue concentrations of some persistent organic pollutants (POPs) with the risk of endometriosis and the endometriotic tissue expression profile of genes related to the endometriosis-related epithelial-mesenchymal transition (EMT) process. This case-control study enrolled 109 women (34 cases and 75 controls) between January 2018 and March 2020. Adipose tissue samples and endometriotic tissues were intraoperatively collected to determine concentrations of nine POPs and the gene expression profiles of 36 EMT-related genes, respectively. Associations of POPs with endometriosis risk were explored with multivariate logistic regression, while the relationship between exposure and gene expression profiles was assessed through Spearman correlation or Mann-Whitney U tests. After adjustment, increased endometriosis risk was associated with p,p'-DDT, PCB-180, and ΣPCBs. POP exposure was also associated with reduced gene expression levels of the CLDN7 epithelial marker and increased levels of the ITGB2 mesenchymal marker and a variety of EMT promoters (HMGA1, HOXA10, FOXM1, DKK1, CCR1, TNFRSF1B, RRM2, ANG, ANGPT1, and ESR1). Our findings indicate that exposure to POPs may increase the risk of endometriosis and might have a role in the endometriosis-related EMT development, contributing to the disease onset and progression. Further studies are warranted to corroborate these findings.

A nontoxic strontium nanoparticle that holds the potential to act upon osteocompetent cells: An in vitro and in vivo characterization.

Estrogen deficiency, long-term immobilization, and/or aging are commonly related to bone mass loss, thus increasing the risk of fractures. One option for bone replacement in injuries caused by either traumas or pathologies is the use of orthopedic cement based on polymethylmethacrylate (PMMA). Nevertheless, its reduced bioactivity may induce long-term detachment from the host tissue, resulting in the failure of the implant. In view of this problem, we developed an alternative PMMA-based porous cement (pPMMA) that favors cell invasion and improves osteointegration with better biocompatibility. The cement composition was changed by adding bioactive strontium-nanoparticles that mimic the structure of bone apatite. The nanoparticles were characterized regarding their physical-chemical properties, and their effects on osteoblasts and osteoclast cultures were assessed. Initial in vivo tests were also performed using 16 New Zealand rabbits as animal models, in which the pPMMA-cement containing the strontium nanoparticles were implanted. We showed that the apatite nanoparticles in which 90% of Ca2+ ions were substituted by Sr2+ (NanoSr 90%) upregulated TNAP activity and increased matrix mineralization. Moreover, at the molecular level, NanoSr 90% upregulated the mRNA expression levels of, Sp7, and OCN. Runx2 was increased at both mRNA and protein levels. In parallel, in vivo tests revealed that pPMMA-cement containing NanoSr 90%, upregulated two markers of bone maturation, OCN and BMP2, as well as the formation of apatite minerals after implantation in the femur of rabbits. The overall data support that strontium nanoparticles hold the potential to up-regulate mineralization in osteoblasts when associated with synthetic biomaterials.

Differential effects of the lipidic and ionic microenvironment on NPP1's phosphohydrolase and phosphodiesterase activities.

Ecto-nucleotide pyrophosphatase/phosphodiesterase 1 (NPP1) is an enzyme present in matrix vesicles (MV). NPP1 participates on the regulation of bone formation by producing pyrophosphate (PPi) from adenosine triphosphate (ATP). Here, we have used liposomes bearing dipalmitoylphosphatidylcholine (DPPC), sphingomyelin (SM), and cholesterol (Chol) harboring NPP1 to mimic the composition of MV lipid rafts to investigate ionic and lipidic influence on NPP1 activity and mineral propagation. Atomic force microscopy (AFM) revealed that DPPC-liposomes had spherical and smooth surface. The presence of SM and Chol elicited rough and smooth surface, respectively. NPP1 insertion produced protrusions in all the liposome surface. Maximum phosphodiesterase activity emerged at 0.082 M ionic strength, whereas maximum phosphomonohydrolase activity arose at low ionic strength. Phosphoserine-Calcium Phosphate Complex (PS-CPLX) and amorphous calcium-phosphate (ACP) induced mineral propagation in DPPC- and DPPC:SM-liposomes and in DPPC:Chol-liposomes, respectively. Mineral characterization revealed the presence of bands assigned to HAp in the mineral propagated by NPP1 harbored in DPPC-liposomes without nucleators or in DPPC:Chol-liposomes with ACP nucleators. These data show that studying how the ionic and lipidic environment affects NPP1 properties is important, especially for HAp obtained under controlled conditions in vitro.

Comparative analysis of the physical, chemical, and microbiological properties of Ti-6Al-4V disks produced by different methods and subjected to surface treatments.

STATEMENT OF PROBLEM: To improve the osseointegration of dental implants and reduce microbiological growth, different micro- and nanoscale surface topographies can be used. PURPOSE: The purpose of this in vitro study was to evaluate the influence of Ti-6Al-4V with 4 surfaces, machined (DU), machined+hydroxyapatite (DUHAp), machined+acid-alkali treatment (DUAA), and additive manufacturing (DMA), on the physical, chemical, and microbiological properties. MATERIAL AND METHODS: The topography of Ti-6Al-4V disks with the 4 surfaces was evaluated by scanning electron microscopy (SEM), the chemical composition by energy dispersive X-ray spectroscopy (EDS), and the crystalline structure by X-ray diffraction (XRD). Physical and chemical properties were analyzed by using wettability and surface free energy, roughness, and microbial adhesion against Staphylococcus aureus by colony forming units (CFU). One-way ANOVA analysis of variance and the Tukey multiple comparisons test were applied to evaluate the data, except CFU, which was submitted to the Kruskal-Wallis nonparametric test (α=.05). RESULTS: DU photomicrographs showed a topography characteristic of a polished machined surface, DUHAp and DUAA exhibited patterns corresponding to the surface modifications performed, and in DMA the presence of partially fused spherical particles was observed. The EDS identified chemical elements inherent in the Ti-6Al-4V, and the DUHAp and DUAA disks also had the ions from the treatments applied. XRD patterns revealed similarities between DU and DMA, as well as characteristic peaks of hydroxyapatite (HA) in the DUHAp disk and the DUAA. Compared with DU and DMA the DUHAp and DUAA groups showed hydrophilic behavior with smaller contact angles and higher surface free energy (P<.05). DMA showed a higher mean value of roughness, different from the others (P<.05), and a higher CFU for S. aureus (P=.006). CONCLUSIONS: DUHAp and DUAA showed similar behaviors regarding wettability, surface free energy, and bacterial adhesion. Among the untreated groups, DMA exhibited higher roughness, bacterial adhesion, and lower wettability and surface free energy.

Impact of enhancement filters of a CMOS system on halo artifact expression at the bone-to-implant interface.

OBJECTIVE: To assess the impact of enhancement filters on the formation of halo artifacts in radiographs of dental implants obtained with a complementary metal oxide semiconductor (CMOS) system. METHODS: Digital radiographs of dental implants placed in dry human mandibles were processed with the Noise Reduction smoothing filter, as well as the Sharpen 1, Sharpen 4, and Sharpen UM high-pass filters available in the CLINIVIEW™ software (Instrumentarium Dental, Tuusula, Finland). Subjective analysis involved evaluating the left, right, and apical surfaces of each implant for the presence of much, few, or no halo. The objective analysis involved measurement of the halo area using the Trainable Weka Segmentation plugin (ImageJ, National Institutes of Health, Bethesda, MD, USA). Data were analyzed using Friedman's test (subjective analysis) and ANOVA (objective analysis) (α = 5%). RESULTS: In the subjective evaluation, the Sharpen 4 filter produced more radiographs with much halo present, and in the objective evaluation, a bigger halo area when compared to the original images and the Noise Reduction filter for all surfaces (p < 0.05). CONCLUSIONS: When evaluating dental implants, priority should be given to original images and those enhanced with smoothing filters since they exhibit fewer halo artifacts. CLINICAL RELEVANCE: Post-processing tools, such as enhancement filters, may improve the image quality and assist some diagnostic tasks. However, little is known regarding the impact of enhancement filters in halo formation on CMOS systems, which have been increasingly used in dental offices.