Role of Side-Chain Free Volume on the Electrochemical Behavior of Poly(propylenedioxythiophenes).

Mixed ionic/electronic conducting polymers are versatile systems for, e.g., energy storage, heat management (exploiting electrochromism), and biosensing, all of which require electrochemical doping, i.e., the electrochemical oxidation or reduction of their macromolecular backbones. Electrochemical doping is achieved via electro-injection of charges (i.e., electronic carriers), stabilized via migration of counterions from a supporting electrolyte. Since the choice of the polymer side-chain functionalization influences electrolyte and/or ion sorption and desorption, it in turn affects redox properties, and, thus, electrochemically induced mixed conduction. However, our understanding of how side-chain versus backbone design can increase ion flow while retaining high electronic transport remains limited. Hence, heuristic design approaches have typically been followed. Herein, we consider the redox and swelling behavior of three poly(propylenedioxythiophene) derivatives, P(ProDOT)s, substituted with different side-chain motifs, and demonstrate that passive swelling is controlled by the surface polarity of P(ProDOT) films. In contrast, active swelling under operando conditions (i.e., under an applied bias) is dictated by the local side-chain free volume on the length scale of a monomer unit. Such insights deliver important design criteria toward durable soft electrochemical systems for diverse energy and biosensing platforms and new understanding into electrochemical conditioning ("break-in") in many conducting polymers.

Reducing delamination of an electron-transporting polymer from a metal oxide for electrochemical applications.

Delamination of the electron-transporting polymer N2200 from indium tin oxide (ITO) in aqueous electrolytes is mitigated by modifying ITO with an azide-functionalized phosphonic acid (PA) which, upon UV irradiation, reacts with the polymer. The optical, electrochemical, and spectroelectrochemical properties of N2200 thin films are retained in aqueous and non-aqueous media.

Soft Materials for Photoelectrochemical Fuel Production.

Polymer semiconductors are fascinating materials that could enable delivery of chemical fuels from water and sunlight, offering several potential advantages over their inorganic counterparts. These include extensive synthetic tunability of optoelectronic and redox properties and unique opportunities to tailor catalytic sites via chemical control over the nanoenvironment. Added to this is proven functionality of polymer semiconductors in solar cells, low-cost processability, and potential for large-area scalability. Herein we discuss recent progress on soft photoelectrochemical systems and define three critical knowledge gaps that must be closed for these materials to reach their full potential. We must (1) understand the influence of electrolyte penetration on photoinduced charge separation, transport, and recombination, (2) learn to exploit the swollen polymer/electrolyte interphase to drive selective fuel formation, and (3) establish co-design criteria for soft materials that sustain function in the face of harsh chemical challenges. Achieving these formidable goals would enable tailorable systems for driving photoelectrochemical fuel production at scale.

New Perylene Diimide Ink for Interlayer Formation in Air-Processed Conventional Organic Photovoltaic Devices.

Roll-to-roll coating of conventional organic photovoltaic architectures in air necessitates low work function, electron-harvesting interlayers as the top interface, termed cathode interlayers. Traditional materials based on metal oxides are often not compatible with coating in air and/or green solvents, require thermal annealing, and are limited in feasibility due to interactions with underlying layers. Alternatively, perylene diimide materials offer easily tunable redox properties, are amenable to air coating in green solvents, and are considered champion organic-based cathode interlayers. However, underlying mechanisms of the extraction of photogenerated electrons are less well understood. Herein, we demonstrate the utilization of two N-annulated perylene diimide materials, namely, PDIN-H and CN-PDIN-H, in air-processed conventional organic photovoltaic devices, using the now standard PM6:Y6 photoactive layer. The processing ink formulation using cesium carbonate as a processing agent to solubilize the perylene diimides in suitable green solvents (1-propanol and ethyl acetate) for uniform film formation using spin or slot-die coating on top of the photoactive layer is critical. Cesium carbonate remains in the film, creating hybrid organic/metal salt cathode interlayers. Best organic photovoltaic devices have power conversion efficiencies of 13.2% with a spin-coated interlayer and 13.1% with a slot-die-coated interlayer, superior to control devices using the classic conjugated polyelectrolyte PFN-Br as an interlayer (ca. 12.8%). The cathode interlayers were found to be semi-insulating in nature, and the device performance improvements were attributed to beneficial interfacial effects and electron tunneling through sufficiently thin layers. The efficiencies beyond 13% achieved in air-processed organic photovoltaic devices utilizing slot-die-coated cathode interlayers are among the highest reported so far, opening new opportunities for the fabrication of large-area solar cell modules.

Rationalizing energy level alignment by characterizing Lewis acid/base and ionic interactions at printable semiconductor/ionic liquid interfaces.

Charge transfer and energy conversion processes at semiconductor/electrolyte interfaces are controlled by local electric field distributions, which can be especially challenging to measure. Herein we leverage the low vapor pressure and vacuum compatibility of ionic liquid electrolytes to undertake a layer-by-layer, ultra-high vacuum deposition of a prototypical ionic liquid EMIM+ (1-ethyl-3-methylimidazolium) and TFSI- (bis(trifluoromethylsulfonyl)-imide) on the surfaces of different electronic materials. We consider a case-by-case study between a standard metal (Au) and four printed electronic materials, where interfaces are characterized by a combination of X-ray and ultraviolet photoemission spectroscopies (XPS/UPS). For template-stripped gold surfaces, we observe through XPS a preferential orientation of the TFSI anion at the gold surface, enabling large electric fields (∼108 eV m-1) within the first two monolayers detected by a large surface vacuum level shift (0.7 eV) in UPS. Conversely, we observe a much more random orientation on four printable semiconductor surfaces: methyl ammonium lead triiodide (MAPbI3), regioregular poly(3-hexylthiophene-2,5-diyl (P3HT)), sol-gel nickel oxide (NiOx), and PbIx-capped PbS quantum dots. For the semiconductors considered, the ionization energy (IE) of the ionic liquid at 3 ML coverage is highly substrate dependent, indicating that underlying chemical reactions are dominating interface level alignment (electronic equilibration) prior to reaching bulk electronic structure. This indicates there is no universal rule for energy level alignment, but that relative strengths of Lewis acid/base sites and ion-molecular interactions should be considered. Specifically, for P3HT, interactions are found to be relatively weak and occurring through the π-bonding structure in the thiophene ring. Alternatively, for NiOx, PbS/PbIx quantum dots, and MAPbI3, our XPS data suggest a combination of ionic bonding and Lewis acid/base reactions between the semiconductor and IL, with MAPbI3 being the most reactive surface. Collectively, our results point towards new directions in interface engineering, where strategically chosen ionic liquid-based anions and cations can be used to preferentially passivate and/or titrate surface defects of heterogeneous surfaces while simultaneously providing highly localized electric fields. These opportunities are expected to be translatable to opto-electronic and electrochemical devices, including energy conversion and storage and biosensing applications.

Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells.

The performance of three-dimensional (3D) organic-inorganic halide perovskite solar cells (PSCs) can be enhanced through surface treatment with 2D layered perovskites that have efficient charge transport. We maximized hole transport across the layers of a metastable Dion-Jacobson (DJ) 2D perovskite that tuned the orientational arrangements of asymmetric bulky organic molecules. The reduced energy barrier for hole transport increased out-of-plane transport rates by a factor of 4 to 5, and the power conversion efficiency (PCE) for the 2D PSC was 4.9%. With the metastable DJ 2D surface layer, the PCE of three common 3D PSCs was enhanced by approximately 12 to 16% and could reach approximately 24.7%. For a triple-cation­mixed-halide PSC, 90% of the initial PCE was retained after 1000 hours of 1-sun operation at ~40°C in nitrogen.

Enhanced Infrared Photodiodes Based on PbS/PbClx Core/Shell Nanocrystals.

Improved passivation strategies to address the more complex surface structure of large-diameter nanocrystals are critical to the advancement of infrared photodetectors based on colloidal PbS. In this contribution, the performance of short-wave infrared (SWIR) photodiodes fabricated with PbS/PbClx (core/shell) nanocrystals vs their PbS-only (core) counterparts are directly compared. Devices using PbS cores suffer from shunting and inefficient charge extraction, while core/shell-based devices exhibit greater external quantum efficiencies and lower dark current densities. To elucidate the implications of the shell chemistry on device performance, thickness-dependent energy level offsets and interfacial chemistry of nanocrystal films with the zinc oxide electron-transport layer are evaluated. The disparate device performance between the two synthetic methods is attributed to unfavorable interface dipole formation and surface defect states, associated with inadequate removal of native organic ligands in core-only films. The core/shell system offers a promising route to manage the additional nonpolar (100) surface facets of larger nanocrystals that conventional halide ligand treatments fail to sufficiently passivate.

Zinc Oxide-Perylene Diimide Hybrid Electron Transport Layers for Air-Processed Inverted Organic Photovoltaic Devices.

In this work, we report the formation of perylene diimide films, from green solvents, for use as electron transporting layers, when combined with ZnO, in inverted-type organic photovoltaics. A modified N-annulated PDI was functionalized with a tert-butyloxycarbonyl protecting group to solubilize the material, enabling solution processing from green solvents. Post-deposition treatment of films via thermal annealing cleaves the protecting group yielding the known PDIN-H material, rendering films solvent-resistant. The PDIN-H films were characterized by optical absorption spectroscopy, contact angle measurements, and atomic force microscopy. When used to modify the surface of ZnO in inverted-type organic photovoltaics (air-processed and tested) based on the PM6:Y6 and PTQ10:Y6 bulk-heterojunctions, the device power conversion efficiency increases from 9.8 to 11.0% and 7.2 to 9.8%, respectively.

Tuning Organic Electrochemical Transistor (OECT) Transconductance toward Zero Gate Voltage in the Faradaic Mode.

In this work, we investigate material design criteria for low-powered/self-powered and efficient organic electrochemical transistors (OECTs) to be operated in the faradaic mode (detection at the gate electrode occurs via electron transfer events). To rationalize device design principles, we adopt a Marcus-Gerischer perspective for electrochemical processes at both the gate and channel interfaces. This perspective considers density of states (DOS) for the semiconductor channel, the gate electrode, and the electrolyte. We complement our approach with energy band offsets of relevant electrochemical potentials that can be independently measured from transistor geometry using conventional electrochemical methods as well as an approach to measure electrolyte potential in an operating OECT. By systematically changing the relative redox property offsets between the redox-active electrolyte and semiconducting polymer channel, we demonstrate a first-order design principle that necessary gate voltage is minimized by good DOS overlap of the two redox processes at the gate and channel. Specifically, for p-type turn-on OECTs, the voltage-dependent, electrochemically active semiconductor DOS should overlap with the oxidant form of the electrolyte to minimize the onset voltage for transconductance. A special case where the electrolyte can be used to spontaneously dope the polymer via charge transfer is also considered. Collectively, our results provide material design pathways toward the development of simple, robust, power-saving, and high-throughput OECT biosensors.

A Multi-modal Approach to Understanding Degradation of Organic Photovoltaic Materials.

State-of-the-art organic photovoltaic (OPV) materials are composed of complex, chemically diverse polymeric and molecular structures that form highly intricate solid-state interactions, collectively yielding exceptional tunability in performance and aesthetics. These properties are especially attractive for semitransparent power-generating windows or shades in living environments, greenhouses, or other architectural integrations. However, before such a future is realized, a broader and deeper understanding of property stability must be acquired. Stability during operating and environmental conditions is critical, namely, material color steadfastness, optoelectronic performance retention, morphological rigidity, and chemical robustness. To date, no single investigation encompasses all four distinct, yet interconnected, metrics. Here, we present a multimodal strategy that captures a dynamic and interconnected evolution of each property during the course of an accelerated photobleaching experiment. We demonstrate this approach across relevant length scales (from molecular to visual macroscale) using X-ray photoelectron spectroscopy, grazing-incidence X-ray scattering, microwave conductivity, and time-dependent photobleaching spectroscopies for two high-performance semitransparent OPV blends-PDPP4T:PC60BM and PDPP4T:IEICO-4F, with comparisons to the stabilities of the individual components. We present direct evidence that specific molecular acceptor (fullerene vs nonfullerene) designs and the resulting donor-acceptor interactions lead to distinctly different mechanistic routes that ultimately arrive at what is termed "OPV degradation." We directly observe a chemical oxidation of the cyano endcaps of the IEICO-4F that coincides with a morphological change and large loss in photoconductivity while the fullerene acceptor-containing blend demonstrates a significantly greater fraction of oxygen uptake but retains 55% of the photoconductivity. This experimental roadmap provides meaningful guidance for future high-throughput, multimodal studies, benchmarking the sensitivity of the different analytical techniques for assessing stability in printable active layers, independent of complete device architectures.

Slot-Die-Coated Ternary Organic Photovoltaics for Indoor Light Recycling.

Efficient organic photovoltaics (OPVs) based on slot-die-coated (SD) ternary blends were developed for low-intensity indoor light harvesting. For active layers processed in air and from eco-friendly solvents, our device performances (under 1 sun and low light intensity) are the highest reported values for fluoro-dithiophenyl-benzothiadiazole donor polymer-based OPVs. The N-annulated perylene diimide dimer acceptor was incorporated into a blend of donor polymer (FBT) and fullerene acceptor (PC61BM) to give ternary bulk heterojunction blends. SD ternary-based devices under 1 sun illumination showed enhanced power conversion efficiency (PCE) from 6.8 to 7.7%. We observed enhancement in the short-circuit current density and open-circuit voltage of the devices. Under low light intensity light-emitting device illumination (ca. 2000 lux), the ternary-based devices achieved a PCE of 14.0% and a maximum power density of 79 µW/cm2 compared to a PCE of 12.0% and a maximum power density of 68 µW/cm2 for binary-based devices. Under the same illumination conditions, the spin-coated (SC) devices showed a PCE of 15.5% and a maximum power density of 88 µW/cm2. Collectively, these results demonstrate the exceptional promise of a SD ternary blend system for indoor light harvesting and the need to optimize active layers based on industry-relevant coating approaches toward mini modules.

Thermally Induced Formation of HF4TCNQ- in F4TCNQ-Doped Regioregular P3HT.

The prototypical system for understanding doping in solution-processed organic electronics has been poly(3-hexylthiophene) (P3HT) p-doped with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). Multiple charge-transfer states, defined by the fraction of electron transfer to F4TCNQ, are known to coexist and are dependent on polymer molecular weight, crystallinity, and processing. Less well-understood is the loss of conductivity after thermal annealing of these materials. Specifically, in thermoelectrics, F4TCNQ-doped regioregular (rr) P3HT exhibits significant conductivity losses at temperatures lower than other thiophene-based polymers. Through detailed spectroscopic investigation of progressively heated P3HT films coprocessed with F4TCNQ, we demonstrate that this diminished conductivity is due to formation of the nonchromophoric, weak dopant HF4TCNQ-. This species is likely formed through hydrogen abstraction from the α aliphatic carbon of the hexyl chain at the 3-position of thiophene rings of rr-P3HT. This reaction is eliminated for polymers with ethylene glycol-containing side chains, which retain conductivity at higher operating temperatures. In total, these results provide a critical materials design guideline for organic electronics.

Nanoscale Visualization and Multiscale Electrochemical Analysis of Conductive Polymer Electrodes.

Conductive polymers are exceptionally promising for modular electrochemical applications including chemical sensors, bioelectronics, redox-flow batteries, and photoelectrochemical systems due to considerable synthetic tunability and ease of processing. Despite well-established structural heterogeneity in these systems, conventional macroscopic electroanalytical methods-specifically cyclic voltammetry-are typically used as the primary tool for structure-property elucidation. This work presents an alternative correlative multimicroscopy strategy. Data from laboratory and synchrotron-based microspectroscopies, including conducting-atomic force microscopy and synchrotron nanoscale infrared spectroscopy, are combined with potentiodynamic movies of electrochemical fluxes from scanning electrochemical cell microscopy (SECCM) to reveal the relationship between electrode structure and activity. A model conductive polymer electrode system of tailored heterogeneity is investigated, consisting of phase-segregated domains of poly(3-hexylthiophene) (P3HT) surrounded by contiguous regions of insulating poly(methyl methacrylate) (PMMA), representing an ultramicroelectrode array. Isolated domains of P3HT are shown to retain bulk-like chemical and electronic structure when blended with PMMA and possess approximately equivalent electron-transfer rate constants compared to pure P3HT electrodes. The nanoscale electrochemical data are used to model and predict multiscale electrochemical behavior, revealing that macroscopic cyclic voltammograms should be much more kinetically facile than observed experimentally. This indicates that parasitic resistances rather than redox kinetics play a dominant role in macroscopic measurements in these conductive polymer systems. SECCM further demonstrates that the ambient degradation of the P3HT electroactivity within P3HT/PMMA blends is spatially heterogeneous. This work serves as a roadmap for benchmarking the quality of conductive polymer films as electrodes, emphasizing the importance of nanoscale electrochemical measurements in understanding macroscopic properties.

High-Throughput Experimental Study of Wurtzite Mn1-x Zn x O Alloys for Water Splitting Applications.

We used high-throughput experimental screening methods to unveil the physical and chemical properties of Mn1-x Zn x O wurtzite alloys and identify their appropriate composition for effective water splitting application. The Mn1-x Zn x O thin films were synthesized using combinatorial pulsed laser deposition, permitting for characterization of a wide range of compositions with x varying from 0 to 1. The solubility limit of ZnO in MnO was determined using the disappearing phase method from X-ray diffraction and X-ray fluorescence data and found to increase with decreasing substrate temperature due to kinetic limitations of the thin-film growth at relatively low temperature. Optical measurements indicate the strong reduction of the optical band gap down to 2.1 eV at x = 0.5 associated with the rock salt-to-wurtzite structural transition in Mn1-x Zn x O alloys. Transmission electron microscopy results show evidence of a homogeneous wurtzite alloy system for a broad range of Mn1-x Zn x O compositions above x = 0.4. The wurtzite Mn1-x ZnxO samples with the 0.4 < x < 0.6 range were studied as anodes for photoelectrochemical water splitting, with a maximum current density of 340 µA cm-2 for 673 nm-thick films. These Mn1-x Zn x O films were stable in pH = 10, showing no evidence of photocorrosion or degradation after 24 h under water oxidation conditions. Doping Mn1-x Zn x O materials with Ga dramatically increases the electrical conductivity of Mn1-x Zn x O up to ∼1.9 S/cm for x = 0.48, but these doped samples are not active in water splitting. Mott-Schottky and UPS/XPS measurements show that the presence of dopant atoms reduces the space charge region and increases the number of mid-gap surface states. Overall, this study demonstrates that Mn1-x Zn x O alloys hold promise for photoelectrochemical water splitting, which could be enhanced with further tailoring of their electronic properties.

Correlation of Coexistent Charge Transfer States in F4TCNQ-Doped P3HT with Microstructure.

Understanding the interaction between organic semiconductors (OSCs) and dopants in thin films is critical for device optimization. The proclivity of a doped OSC to form free charges is predicated on the chemical and electronic interactions that occur between dopant and host. To date, doping has been assumed to occur via one of two mechanistic pathways: an integer charge transfer (ICT) between the OSC and dopant or hybridization of the frontier orbitals of both molecules to form a partial charge transfer complex (CPX). Using a combination of spectroscopies, we demonstrate that CPX and ICT states are present simultaneously in F4TCNQ-doped P3HT films and that the nature of the charge transfer interaction is strongly dependent on the local energetic environment. Our results suggest a multiphase model, where the local charge transfer mechanism is defined by the electronic driving force, governed by local microstructure in regioregular and regiorandom P3HT.

Energy Level Alignment of Molybdenum Oxide on Colloidal Lead Sulfide (PbS) Thin Films for Optoelectronic Devices.

Interfacial charge transport in optoelectronic devices is dependent on energetic alignment that occurs via a number of physical and chemical mechanisms. Herein, we directly connect device performance with measured thickness-dependent energy-level offsets and interfacial chemistry of 1,2-ethanedithiol-treated lead sulfide (PbS) quantum dots and molybdenum oxide. We show that interfacial energetic alignment results from partial charge transfer, quantified via the chemical ratios of Mo5+ relative to Mo6+. The combined effect mitigates leakage current in both the dark and the light, relative to a metal contact, with an overall improvement in open circuit voltage, fill factor, and short circuit current.

Critical Interface States Controlling Rectification of Ultrathin NiO-ZnO p-n Heterojunctions.

Herein, we consider the heterojunction formation of two prototypical metal oxides: p-type NiO and n-type ZnO. Elementally abundant, low-cost metal oxide/oxide' heterojunctions are of interest for UV optical sensing, gas sensing, photocatalysis, charge confinement layers, piezoelectric nanogenerators, and flash memory devices. These heterojunctions can also be used as current rectifiers and potentially as recombination layers in tandem photovoltaic stacks by making the two oxide layers ultrathin. In the ultrathin geometry, understanding and control of interface electronic structure and chemical reactions at the oxide/oxide' interface are critical to functionality, as oxygen atoms are shared at the interface of the dissimilar materials. In the studies presented here the extent of chemical reactions and interface band bending is monitored using X-ray and ultraviolet photoelectron spectroscopies. Interface reactivity is controlled by varying the near surface composition of nickel oxide, nickel hydroxide, and nickel oxyhydroxide using standard surface-treatment procedures. A direct correlation between relative percentage of interface hydroxyl chemistry (and hence surface Lewis basicity) and the local band edge alignment for ultrathin p-n junctions (6 nm NiO/30 nm ZnO) is observed. We propose an acid-base formulism to explain these results: the stronger the acid-base reaction, the greater the fraction of interfacial electronic states which lower the band offset between the ZnO conduction band and the NiO valence band. Increased interfacial gap states result in larger reverse bias current of the p-n junction and lower rectification ratios. The acid-base formulism could serve as a future design principle for oxide/oxide' and other heterojunctions based on dissimilar materials.

Quantifying the Extent of Contact Doping at the Interface between High Work Function Electrical Contacts and Poly(3-hexylthiophene) (P3HT).

We demonstrate new approaches to the characterization of oxidized regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) that results from electronic equilibration with device-relevant high work function electrical contacts using high-resolution X-ray (XPS) and ultraviolet (UPS) photoelectron spectroscopy (PES). Careful interpretation of photoemission signals from thiophene sulfur atoms in thin (ca. 20 nm or less) P3HT films provides the ability to uniquely elucidate the products of charge transfer between the polymer and the electrical contact, which is a result of Fermi-level equilibration between the two materials. By comparing high-resolution S 2p core-level spectra to electrochemically oxidized P3HT standards, the extent of the contact doping reaction is quantified, where one in every six thiophene units (ca. 20%) in the first monolayer is oxidized. Finally, angle-resolved XPS of both pure P3HT and its blends with phenyl-C61-butyric acid methyl ester (PCBM) confirms that oxidized P3HT species exist near contacts with work functions greater than ca. 4 eV, providing a means to characterize the interface and "bulk" region of the organic semiconductor in a single film.