Heavy metal ion sensing strategies using fluorophores for environmental remediation.

The main aim of this review is to provide an extensive summary of the latest advances within the emerging research area focused on detecting heavy metal ion pollution, particularly sensing strategies. The review explores various heavy metal ion detection approaches, encompassing spectrometry, electrochemical methods, and optical techniques. Numerous initiatives have been undertaken in recent times in response to the increasing demand for fast, sensitive, and selective sensors. Notably, fluorescent sensors have acquired prominence owing to the numerous advantages such as outstanding specificity, reversibility, and sensitivity. Further, it also explores the discussion of various nanomaterials employed in sensing heavy metal ions. In this regard, the exclusive emphasis is placed on fluorescent nanomaterials based on organic dyes, quantum dots, and fluorescent aptasensors for metal ion removal from aqueous systems to identify the destiny of dangerous heavy metal ions in clean circumstances.

Heterogeneous g-C3N4/polyaniline composites enhanced the conversion of organics into methane during anaerobic wastewater treatment.

In this study, g-C3N4/PANI was prepared by in situ oxidative polymerization. Graphite-phase carbon nitride (g-C3N4) with surface defects was deposited onto the surface of conductive polyaniline (PANI) to form a p-n heterojunction. This construction aimed to create an efficient heterogeneous catalyst, increasing the surface defect level and active sites of the composite, and augmenting its capability to capture and transfer extracellular electrons under anaerobic conditions. This addresses the challenge of low efficiency in direct interspecies electron transfer between bacteria and archaea during anaerobic digestion for methane production. The results showed that the prepared g-C3N4/PANI increased the CH4 yield and CH4 production rate by 82% and 96%, respectively. Notably, the conductivity and XPS test results showed that the ratio of g-C3N4 to PANI was 0.15, and the composite exhibited favorable conductivity, with a uniform distribution of pyrrolic nitrogen, pyridinic nitrogen, and graphitic nitrogen, each accounting for approximately 30%. Furthermore, g-C3N4/PANI effectively enhanced the metabolic efficiency of intermediate products such as acetate and butyrate. Analysis of the microbial community structure revealed that g-C3N4/PANI led to a significant increase in the abundance of hydrogenotrophic methanogen Methanolinea (from 48% to 64%) and enriched Clostridium (a rise of 1%) with direct interspecies electron transfer capability. Microbial community function analysis demonstrated that the addition of g-C3N4/PANI boosted the activities of key enzymes involved in anaerobic digestion, including phosphate transacetylase (PTA), phospho-butyryl transferase (PTB), and NAD-independent lactate dehydrogenase (NNLD), by 47%, 135%, and 153%, respectively. This acceleration in enzymatic activity promoted the metabolism of acetyl-CoA, butyryl-CoA, and pyruvate. Additionally, the function of ABC transporters was enhanced, thereby improving the efficiency of material and energy exchange among microorganisms.

The interplay of hematite and photic biofilm triggers the acceleration of biotic nitrate removal.

The soil-water interface is replete with photic biofilm and iron minerals; however, the potential of how iron minerals promote biotic nitrate removal is still unknown. This study investigates the physiological and ecological responses of photic biofilm to hematite (Fe2O3), in order to explore a practically feasible approach for in-situ nitrate removal. The nitrate removal by photic biofilm was significantly higher in the presence of Fe2O3 (92.5%) compared to the control (82.8%). Results show that the presence of Fe2O3 changed the microbial community composition of the photic biofilm, facilitates the thriving of Magnetospirillum and Pseudomonas, and promotes the growth of photic biofilm represented by the extracellular polymeric substance (EPS) and the content of chlorophyll. The presence of Fe2O3 also induces oxidative stress (•O2-) in the photic biofilm, which was demonstrated by electron spin resonance spectrometry. However, the photic biofilm could improve the EPS productivity to prevent the entrance of Fe2O3 to cells in the biofilm matrix and mitigate oxidative stress. The Fe2O3 then promoted the relative abundance of Magnetospirillum and Pseudomonas and the activity of nitrate reductase, which accelerates nitrate reduction by the photic biofilm. This study provides an insight into the interaction between iron minerals and photic biofilm and demonstrates the possibility of combining biotic and abiotic methods to improve the in-situ nitrate removal rate.

Potable water production through a low-cost single chamber solar still in north India.

The main aim of this study is to evaluate the performance of a single slope solar still and to assess the effect of nanofluid on its performance. A single basin single slope solar still was designed and fabricated at the Department of Chemical Engineering, IET Lucknow. Its performance was assessed in terms of the yield of potable water. The effect of various climatic parameters was also studied. Al2O3 nanofluid was used to enhance the yield of the solar still. In the presence of nanofluid, the total yield of the solar still improved by 16.6%. Its economic feasibility was analyzed and reported. The portability of the small size of solar stills, its better economics, easy fabrication, and good performance make them very useful for industrial as well as household purposes.

An exploratory diagnosis and proposed index of technological change and sustainable industrial development in selected OECD member countries.

Industrial development has resulted in economic progress and the well-being of the society. At the same time, the impact of the industrial complex has disrupted the environment and resulted in climate change related impacts. The purpose of this study was to carry out an exploratory diagnosis and propose a technological change and sustainable industrial development index at the international level. Therefore, a network study was conducted to identify the main nodes and thematic clusters associated with cleaner production. A patent analysis was applied to technologies related three selected/relevant areas of cleaner production, i.e. carbon footprint, wastewater treatment, and renewable energy. Additionally, based on factor analysis, an index including different indicators related to scientific, technological, economic, environmental, and social issues was developed and proposed in this study.

Improvement of biotic nitrate reduction in constructed photoautotrophic biofilm-soil microbial fuel cells.

The biotic nitrate reduction rate in freshwater ecosystems is typically constrained by the scarcity of carbon sources. In this study, 'two-chambers' - 'two-electrodes' photoautotrophic biofilm-soil microbial fuel cells (P-SMFC) was developed to accelerate nitrate reduction by activating in situ electron donors that originated from the soil organic carbon (SOC). The nitrate reduction rate of P-SMFC (0.1341 d-1) improved by âˆ¼ 1.6 times on the 28th day compared to the control photoautotrophic biofilm. The relative abundance of electroactive bacterium increased in the P-SMFC and this bacterium contributed to obtain electrons from SOC. Biochar amendment decreased the resistivity of P-SMFC, increased the electron transferring efficiency, and mitigated anodic acidification, which continuously facilitated the thriving of putative electroactive bacterium and promoted current generation. The results from physiological and ecological tests revealed that the cathodic photoautotrophic biofilm produced more extracellular protein, increased the relative abundance of Lachnospiraceae, Magnetospirillaceae, Pseudomonadaceae, and Sphingomonadaceae, and improved the activity of nitrate reductase and ATPase. Correspondingly, P-SMFC in the presence of biochar achieved the highest reaction rate constant for nitrate reduction (kobs) (0.2092 d-1) which was 2.4 times higher than the control photoautotrophic biofilm. This study provided a new strategy to vitalize in situ carbon sources in paddy soil for nitrate reduction by the construction of P-SMFC.

Design and preparation of reticular superabsorbent hydrogel material with nutrient slow-release and high shear strength for ecological remediation of abandoned mines with steep slopes.

In order to solve ecological remediation issues for abandoned mines with steep slopes, a kind of hydrogels with high cohesion and water-retaining were designed by inorganic mineral skeleton combining with polymeric organic network cavities. This eco-friendly hydrogel (MFA/HA-g-p(AA-co-AM)) was prepared with acrylic acid (AA)-acrylamide (AM) as network, which was grafted with humic acids (HA) as network binding point reinforcement skeleton and polar functional group donors, KOH-modified fly ash (MFA) as internal supporter. The maximum water absorption capacities were 1960 g/g for distilled water, which followed the pseudo-second-order model. This super water absorption was attributed to the first stage of 62 % fast absorption due to the high specific surface area, pore volume and low osmotic pressure, moreover, the multiple hydrophilic functional groups and network structure swell contributed to 36 % of the second stage slow adsorption. In addition, the pore filling of water in mesoporous channels contributed the additional 2 % water retention on the third stage. The high saline-alkali resistance correlated with the electrostatic attraction with MFA and multiple interactions with oxygen-containing functional groups in organic components. MFA and HA also enhanced the shear strength and fertility retention properties. After 5 cycles of natural dehydration and reabsorption process, these excellent characteristics of reusability and water absorption capacity kept above 97 %. The application of 0.6 wt% MFA/HA-g-p(AA-co-AM) at 15° slope could improve the growth of ryegrass by approximately 45 %. This study provides an efficient and economic superabsorbent material for ecological restoration of abandoned mines with steep slopes.

Advances in amelioration of air pollution using plants and associated microbes: An outlook on phytoremediation and other plant-based technologies.

Globally, air pollution is an unfortunate aftermath of rapid industrialization and urbanization. Although the best strategy is to prevent air pollution, it is not always feasible. This makes it imperative to devise and implement techniques that can clean the air continuously. Plants and microbes have a natural potential to transform or degrade pollutants. Hence, strategies that use this potential of living biomass to remediate air pollution seem to be promising. The simplest future trend can be planting suitable plant-microbe species capable of removing air pollutants like SO2, CO2, CO, NOX and particulate matter (PM) along roadsides and inside the buildings. Established wastewater treatment strategies such as microbial fuel cells (MFC) and constructed wetlands (CW) can be suitably modified to ameliorate air pollution. Green architecture involving green walls and green roofs is facile and aesthetic, providing urban ecosystem services. Certain microbe-based bioreactors such as bioscrubbers and biofilters may be useful in small confined spaces. Several generative models have been developed to assist with planning and managing green spaces in urban locales. The physiological limitations of using living organisms can be circumvent by applying biotechnology and transgenics to improve their potential. This review provides a comprehensive update on not just the plants and associated microbes for the mitigation of air pollution, but also lists the technologies that are available and/or can be modified and used for air pollution control. The article also gives a detailed analysis of this topic in the form of strengths-weaknesses-opportunities-challenges (SWOC). The strategies mentioned in this review would help to attain corporate Environmental Social and Governance (ESG) and Sustainable Development Goals (SDGs), while reducing carbon footprint in the urban scenario. The review aims to emphasise that urbanization is possible while tackling air pollution using facile, green techniques involving plants and associated microbes.

Influence of crop residue-induced Fe-DOC complexation on nitrate reduction in paddy soil.

Although complexation between dissolved organic matter (DOM) and ubiquitous Fe is known to have a major influence on electron transferring ability in redoximorphic soil, it was unclear whether and how this complexation affected nitrate reduction and N2O productivity. The nitrate reduction of paddy soil in the presence of crop residues returning under flooding conditions was explored in this study. The rate of nitrate reduction in control soil was 0.0677 d-1, while it improved 1.99 times in treatment soil with Chinese milk vetch (CMV) straw returning. During a 28-day incubation period, N2O productivity decreased 0.08-0.91 ppb in CMV soil and 0.43-0.50 ppb in rice straw soil compared with control. The presence of crop residue increased DOC content and Fe (III) reduction rate, which aided in the formation of Fe (II)-DOC complexation. Meanwhile, the addition of CMV increased the content of DOC by 5.14-78.77 mg/kg and HCl extractable Fe (II) by 35.12-1221.03 mg/kg. Crop residues returning to soil increased the relative abundance of iron reductive and electroactive genera, as well as denitrifying genera with more copies of denitrification genes (Archangiaceae, Gemmatimonadaceae, and Burkholderiaceae). The synergistic effect of Fe-DOC complexation, electroactive genera, and denitrifying genera contributed to up-regulated expression of napA and narG (5.84 × 106 and 3.39 × 107 copies increased in the CMV soil compared to the control) numbers and equally accelerated reduction of nitrate to nitrite, while further nitrite reduction was primarily attributed to the abiotic reaction by Fe (II). From a bio-electrochemical point of view, this work provided new insight into the nitrate reduction of paddy soil impacted by Fe-DOC complexation.

Application of microbial resources in biorefineries: Current trend and future prospects.

The recent growing interest in sustainable and alternative sources of energy and bio-based products has driven the paradigm shift to an integrated model termed "biorefinery." Biorefinery framework implements the concepts of novel eco-technologies and eco-efficient processes for the sustainable production of energy and value-added biomolecules. The utilization of microbial resources for the production of various value-added products has been documented in the literatures. However, the appointment of these microbial resources in integrated resource management requires a better understanding of their status. The main of aim of this review is to provide an overview on the defined positioning and overall contribution of the microbial resources, i.e., algae, fungi and bacteria, for various bioprocesses and generation of multiple products from a single biorefinery. By utilizing waste material as a feedstock, biofuels can be generated by microalgae while sequestering environmental carbon and producing value added compounds as by-products. In parallel, fungal biorefineries are prolific producers of lignocellulose degrading enzymes along with pharmaceutically important novel products. Conversely, bacterial biorefineries emerge as a preferred platform for the transformation of standard cells into proficient bio-factories, developing chassis and turbo cells for enhanced target compound production. This comprehensive review is poised to offer an intricate exploration of the current trends, obstacles, and prospective pathways of microbial biorefineries, for the development of future biorefineries.

Application of a generalized hybrid machine learning model for the prediction of H2S and VOCs removal in a compact trickle bed bioreactor (CTBB).

This study presents a generalized hybrid model for predicting H2S and VOCs removal efficiency using a machine learning model: K-NN (K - nearest neighbors) and RF (random forest). The approach adopted in this study enabled the (i) identification of odor removal efficiency (K) using a classification model, and (ii) prediction of K <100%, based on inlet concentration, time of day, pH and retention time. Global sensitivity analysis (GSA) was used to test the relationships between the inputs and outputs of the K-NN model. The results from classification model simulation showed high goodness of fit for the classification models to predict the removal of H2S and VOCs (SPEC = 0.94-0.99, SENS = 0.96-0.99). It was shown that the hybrid K-NN model applied for the "Klimzowiec" WWTP, including the pilot plant, can also be applied to the "Urbanowice" WWTP. The hybrid machine learning model enables the development of a universal system for monitoring the removal of H2S and VOCs from WWTP facilities.

Microalgae derived honeycomb structured mesoporous diatom biosilica for adsorption of malachite green: Process optimization and modeling.

The present study investigated the removal of malachite green dye from aquifers by means of microalgae-derived mesoporous diatom biosilica. The various process variables (dye concentration, pH, and adsorbent dose) influencing the removal of the dye were optimized and their interactive effects on the removal efficiency were explored by response surface methodology. The pH of the solution (pH = 5.26) was found to be the most dominating among other tested variables. The Langmuir isotherm (R2 = 0.995) best fitted the equilibrium adsorption data with an adsorption capacity of 40.7 mg/g at 323 K and pseudo-second-order model (R2 = 0.983) best elucidated the rate of dye removal (10.6 mg/g). The underlying mechanism of adsorption was investigated by Weber-Morris and Boyd models and results revealed that the film diffusion governed the overall adsorption process. The theoretical investigations on the dye structure using DFT-based chemical reactivity descriptors indicated that malachite green cations are electrophilic, reactive and possess the ability to accept electrons, and are strongly adsorbed on the surface of diatom biosilica. Also, the Fukui function analysis proposed the favorable adsorption sites available on the adsorbent surface.

Enhanced removal of dimethyl phthalate using heterogeneous UVC/VUV-Fenton amendment with Fe3O4@CM-ß-CD/rGO catalyst: Efficiency, degradation mechanism and toxicity.

Dimethyl phthalate (DMP) is widely used as plasticizer, and this kind of plastic industry wastewater is refractory due to the complex chemical structure and endocrine disrupting property. In order to effectively degrade and mineralize DMP contaminated wastewater, a heterogeneous UVC/VUV-Fenton catalyst system was designed with the amendment of targeted design catalyst Fe3O4@CM-ß-CD/rGO with core-shell like structure covered with loose convex folded lamellar. The optimum removal and mineralization efficiency of DMP were 98.6 % and 62.8 % in 30 min with 150 mg L-1 Fe3O4@CM-ß-CD/rGO and 8 mmol L-1 H2O2. This efficient and fast removal were attributed to a variety of photocatalytic oxidative active species •OH, •O2- and h+ with 59.6%, 29.1% and 9.9% contribution ratio, which mainly took effect on benzene ring open and side-chain fracture by oxidative, hydrolysis and hydrogen substitution determined by the rupture energy requirement from chemical bond in DMP. The target function of CM-ß-CD in catalyst controlled the photo-electron generation rate and shorten mass transfer distance by the cladding lamellar, moreover, rGO accelerated the redox between Fe (II) and Fe (III) and electron transfer. The catalytic recovery and removal to DMP kept above 90 % after five recycles. This study provided an excellent performance catalyst and an effective photo-Fenton approach and for the treatment of endocrine disrupting wastewater.

Occurrence, transport, and toxicity of microplastics in tropical food chains: perspectives view and way forward.

Microplastics, which have a diameter of less than 5 mm, are becoming an increasingly prevalent contaminant in terrestrial and aquatic ecosystems due to the dramatic increase in plastic production to 390.7 million tonnes in 2021. Among all the plastics produced since 1950, nearly 80% ended up in the environment or landfills and eventually reached the oceans. Currently, 82-358 trillion plastic particles, equivalent to 1.1-4.9 million tonnes by weight, are floating on the ocean's surface. The interactions between microorganisms and microplastics have led to the transportation of other associated pollutants to higher trophic levels of the food chain, where microplastics eventually reach plants, animals, and top predators. This review paper focuses on the interactions and origins of microplastics in diverse environmental compartments that involve terrestrial and aquatic food chains. The present review study also critically discusses the toxicity potential of microplastics in the food chain. This systematic review critically identified 206 publications from 2010 to 2022, specifically reported on microplastic transport and ecotoxicological impact in aquatic and terrestrial food chains. Based on the ScienceDirect database, the total number of studies with "microplastic" as the keyword in their title increased from 75 to 4813 between 2010 and 2022. Furthermore, various contaminants are discussed, including how microplastics act as a vector to reach organisms after ingestion. This review paper would provide useful perspectives in comprehending the possible effects of microplastics and associated contaminants from primary producers to the highest trophic level (i.e. human health).

Green synthesis of magnetic azo-linked porous organic polymers with recyclable properties for enhanced Bisphenol-A adsorption from aqueous solutions.

Porous organic polymers (POPs) present superior adsorption performance to steroid endocrine disruptors. However, the effective recovery and high cost have been a big limitation for their large-scale applications. Herein, magnetic azo-linked porous polymers (Fe3O4@SiO2/ALP-p) were designed and prepared in a green synthesis approach using low-price materials from phloroglucinol and pararosaniline via a diazo-coupling reaction under standard temperature and pressure conditions, which embedded with Fe3O4@SiO2 nanoparticles to form three-dimensional interlayer network structure with flexible-rigid interweaving. The saturated adsorption capacity to bisphenol-A (BPA) was 485.09 mg/g at 298 K, which increased by 1.4 times compared with ALP-p of relatively smaller mass density. This enhanced adsorption was ascribed to increment from surface adsorption and pore filling with 2.3 times of specific surface area and 2.6 times of pore volume, although the total organic functional groups decreased with Fe3O4@SiO2 amendment. Also, the adsorption rate increased by about 1.1 and 1.5-fold due to enhancement in the initial stage of surface adsorption and subsequent stage pore diffusion, respectively. Moreover, this adsorbent could be used in broad pH (3.0-7.0) and salinity adaptability (<0.5 mol/L). The loss of adsorption capacity and magnetic recovery were lower than 1.1% and 0.8% in each operation cycle because of the flexible-rigid interweave. This excellent performance was contributed by synergistic effects from physisorption and chemisorption, such as pore filling, electrostatic attraction, π-π stacking, hydrogen bonding, and hydrophobic interaction. This study offered a cost-effective, high-performing, and ecologically friendly material along with a green preparation method.

Effect of different bulking agents on fed-batch composting and microbial community profile.

The current study focused on analyzing the effect of different types of bulking agents and other factors on fed-batch composting and the structure of microbial communities. The results indicated that the introduction of bulking agents to fed-batch composting significantly improved composting efficiency as well as compost product quality. In particular, using green waste as a bulking agent, the compost products would achieve good performance in the following indicators: moisture (3.16%), weight loss rate (85.26%), and C/N ratio (13.98). The significant difference in moisture of compost products (p < 0.05) was observed in different sizes of bulking agent (green waste), which was because the voids in green waste significantly affected the capacity of the water to permeate. Meanwhile, controlling the size of green waste at 3-6 mm, the following indicators would show great performance from the compost products: moisture (3.12%), organic matter content (63.93%), and electrical conductivity (EC) (5.37 mS/cm). According to 16S rRNA sequencing, the relative abundance (RA) of thermophilic microbes increased as reactor temperature rose in fed-batch composting, among which Firmicutes, Proteobacteria, Basidiomycota, and Rasamsonia were involved in cellulose and lignocellulose degradation.

Effect of iron sources on methane production and phosphorous transformation in an anaerobic digestion system of waste activated sludge.

The iron materials are commonly employed to enhance resource recovery from waste activated sludge through anaerobic digestion (AD). The influence of different iron sources, such as Fe2O3, Fe3O4, and FeCl3 on methane production and phosphorus transformation in AD systems with thermal hydrolyzed sludge as the substrate was assessed in this study. The results indicated that iron oxides effectively promote methane yield and methane production rate in AD systems, resulting in a maximum increase in methane production by 1.6 times. Soluble FeCl3 facilitated the removal of 92.3% of phosphorus from the supernatant through the formation of recoverable precipitates in the sludge. The introduction of iron led to an increase in the abundance of bacteria responsible for hydrolysis and hydrogenotrophic methanogenesis. However, the enrichment of microbial communities varied depending on the specific irons used. This study provides support for AD systems that recover phosphorus and produce methane efficiently from waste sludge.

Emerging technology effects on combined agricultural and eco-vermicompost.

This study focused on the waste management of livestock manure and wetland plant residues and their increasing effect on terrestrial and aquatic ecosystems. The benefits of nutrient-rich plants and manures are often overlooked. By conducting a soil column experiment with a fully factorial design, this work found that adding the vermicompost amendments of wetland plants [combination of Canna indica (CiV), Cyperus alternifollius (CaV), Acorus calamus (AcV), and Hydrocotyle vulgaris (HvV) vermicompost] to agricultural wastes affected maize growth throughout its growing season. The results demonstrated that the use of combined AcV and HvV wetland plant-based vermicompost as an organic fertilizer increased the plant total nitrogen (TN: 92% increase) and soil organic matter (SOM: 192% increase) compared with those in control CK. Meanwhile, the combination of CaV with HvV increased the shoot biomass by 3.4 and 4.6 folds compared with that in NPK and CK, respectively. Overall, a new approach for transforming ecological wastes into organic fertilizers was proposed.

Assessment of hybrid fixed and moving bed biofilm applications for wastewater treatment capacity increase - In situ tests in El-Gouna WWTP, Egypt.

This paper provides a procedure for comparing the performance of different biofilm carrier medias and their surrounding suspended biomass through oxygen uptake rate (OUR) tests. For in situ (oxygen uptake rate (OUR) measurements, three identical lab scale biofilm reactors were set up at the El Gouna wastewater treatment plant (WWTP). In this setup, two options of media for moving-bed biofilm reactors (MBBR) and one media for fixed-bed biofilm reactors (FBBR) were compared. The WWTP also used the same carrier in a real scale hybrid application to analyze how the interactions between the carrier type and the suspended biomass influences the overall performance. The in situ OUR approach is recommended to measure the contribution of the biofilm fixed biomass under site specific conditions. Specifically, settleability and diffusion limitations are the two opposite poles that cannot be predicted adequately for mild climate conditions based on the literature. A biofilm carrier application can add but actually can also reduce the capacity in a hybrid activated sludge system: The added MBBR-media was able to grind down the sludge flocs forming a poorly settleable suspended biomass. The added FBBR-media can lead to extracellular polymeric substances (EPS) rich biofilms that contribute very little as substrate and oxygen are unavailable for the microorganisms present in the biofilm. In this application of the comparison procedure, Kaldnes K1 like MBBR media was compared with a recycling MBBR carrier option (poly propylene bottle caps) and Jäger Envirotech "BioCurlz™" FBBR media. The study showed higher average rates for the MBBR but decreased settleability. The FBBR showed higher peak rates when flushed to break up the biofilm and well settleable sludge. The determination of OUR per g of volatile solids (SOUR) showed comparable results for all the carriers and in warm conditions, only the capacity to accommodate biomass determines the contribution of the carrier.