Spin-Phonon Coupling and Magnetic Transition in an Organic Molecule Intercalated Cr2Ge2Te6.

The manipulation of spin-phonon coupling in both formations and explorations of magnetism in two-dimensional van der Waals ferromagnetic semiconductors facilitates unprecedented prospects for spintronic devices. The interlayer engineering with spin-phonon coupling promises controllable magnetism via organic cation intercalation. Here, spectroscopic evidence reveals the intercalation effect on the intrinsic magnetic and electronic transitions in quasi-two-dimensional Cr2Ge2Te6 using tetrabutyl ammonium (TBA+) as the intercalant. The temperature evolution of Raman modes, Eg3 and Ag1, along with the magnetization measurements, unambiguously captures the enhancement of the ferromagnetic Curie temperature in the intercalated heterostructure. Moreover, the Eg4 mode highlights the increased effect of spin-phonon interaction in magnetic-order-induced lattice distortion. Combined with the first-principle calculations, we observed a substantial number of electrons transferred from TBA+ to Cr through the interface. The interplay between spin-phonon coupling and magnetic ordering in van der Waals magnets appeals for further understanding of the manipulation of magnetism in layered heterostructures.

The importance of rapid assessment tools in evaluating mental health in emergency departments among patients with chronic diseases.

Background: Rapid screening tools such as the WHO well-being Index (WWBI), Six-item screener (SIS), and the CLOX-1 test can be used to assess overall mental health and cognition, respectively. We sought to evaluate mental health with cognition in individuals with chronic diseases and stable vital signs presenting to the Emergency Department (ED). Methods: An observational study in the ED with 279 participants was conducted. Results: Chronic diseases were more prevalent among 51-70 years (43.4%) and diabetes was most common (58.8%). Fever (22.6%) and GI bleeding (32.6%) presentation were high. Participants with low WWBI had low SIS compared to the ones with higher scores (83.3% vs. 17.7%, p < 0.001) and also had low CLOX-1 compared to ones with high CLOX-1 (67.3% vs. 5%, <0.001). A positive correlation between WWBI with SIS (correlation coefficient = 0.305, p < 0.001) and CLOX-1 (0.441, <0.001). Regression analysis indicates a positive association between WWBI and the SIS (standardized regression coefficient = 0.187, 95%CI = 0.236-1.426, and p = 0.006) and CLOX 1 (0.338, 0.2-0.463, <0.001). Conclusion: In the ED, the evaluation of mental health even among cognitive impaired is feasible and crucial.

Pressure-induced assemblies and structures of graphitic-carbon sheet encapsulated Au nanoparticles.

A novel strategy of using hydrostatic pressures to synthesize gold-carbon (Au-C) nanohybrid materials is explored. The stable face-centered-cubic (fcc) Au undergoes a structural phase transition to a mixture of primitive orthorhombic and cubic phases as the carbon phase acquires a highly ordered onion-like carbon (OLC) structure which encapsulates the Au nanoparticles, thereby exerting an additional pressure. Increasing the pressure results in a one dimensional (1-D) chain-like structure with the primitive cubic Au nanoparticles contained in an amorphous carbon matrix. The OLC structure allows the formation of quenchable Au nanoparticle phases with the primitive close packing and Au-C hybrids with new mesoscopic structures. Under pressure, we observe the formation of a hybrid material composed of a poorly conducting matrix made of amorphous carbon and conducting OLC-encapsulated Au nanoparticles. The electrical conductivity of this hybrid material under pressure reveals a percolation threshold. We present a new synthesis approach to explore the interplay between atomic and mesoscopic structures and the electrical conductivity of metal hybrid structures.

Tuning the Photoresponse of Nano-Heterojunction: Pressure-Induced Inverse Photoconductance in Functionalized WO3 Nanocuboids.

Inverse photoconductivity (IPC) is a unique photoresponse behavior that exists in few photoconductors in which electrical conductivity decreases with irradiation, and has great potential applications in the development of photonic devices and nonvolatile memories with low power consumption. However, it is still challenging to design and achieve IPC in most materials of interest. In this study, pressure-driven photoconductivity is investigated in n-type WO3 nanocuboids functionalized with p-type CuO nanoparticles under visible illumination and an interesting pressure-induced IPC accompanying a structural phase transition is found. Native and structural distortion induced oxygen vacancies assist the charge carrier trapping and favor the persistent positive photoconductivity beyond 6.4 GPa. The change in photoconductivity is mainly related to a phase transition and the associated changes in the bandgap, the trapping of charge carriers, the WO6 octahedral distortion, and the electron-hole pair recombination process. A unique reversible transition from positive to inverse photoconductivity is observed during compression and decompression. The origin of the IPC is intimately connected to the depletion of the conduction channels by electron trapping and the chromic property of WO3. This synergistic rationale may afford a simple and powerful method to improve the optomechanical performance of any hybrid material.

Pressure-induced fluorescence enhancement of FAαPbBr2+α composite perovskites.

FAαPbBr2+α composite perovskites consisting of 0D FA4PbBr6 and 3D FAPbBr3 have been synthesized by a solid state reaction. Due to the endotaxy passivation of FAPbBr3 by FA4PbBr6, FAPbBr3 crystals were stably deformed without agglomeration from the cubic to the orthorhombic structure by compression, which led to a significant PL enhancement.

Redistribution of native defects and photoconductivity in ZnO under pressure.

Control and design of native defects in semiconductors are extremely important for industrial applications. Here, we investigated the effect of external hydrostatic pressure on the redistribution of native defects and their impact on structural phase transitions and photoconductivity in ZnO. We investigated morphologically distinct rod- (ZnO-R) and flower-like (ZnO-F) ZnO microstructures where the latter contains several native defects namely, oxygen vacancies, zinc interstitials and oxygen interstitials. Synchrotron X-ray diffraction reveals pressure-induced irreversible phase transformation of ZnO-F with the emergence of a hexagonal metallic Zn phase due to enhanced diffusion of interstitial Zn during decompression. In contrast, ZnO-R undergoes a reversible structural phase transition displaying a large hysteresis during decompression. We evidenced that the pressure-induced strain and inhomogeneous distribution of defects play crucial roles at structural phase transition. Raman spectroscopy and emission studies further confirm that the recovered ZnO-R appears less defective than ZnO-F. It resulted in lower photocurrent gain and slower photoresponse during time-dependent transient photoresponse with the synergistic application of pressure and illumination (ultra-violet). While successive pressure treatments improved the photoconductivity in ZnO-R, ZnO-F failed to recover even its ambient photoresponse. Pressure-induced redistribution of native defects and the optoelectronic response in ZnO might provide new opportunities in promising semiconductors.

Li-ion battery material under high pressure: amorphization and enhanced conductivity of Li4Ti5O12.

Lithium titanium oxide (Li4Ti5O12, LTO), a 'zero-strain' anode material for lithium-ion batteries, exhibits excellent cycling performance. However, its poor conductivity highly limits its applications. Here, the structural stability and conductivity of LTO were studied using in situ high-pressure measurements and first-principles calculations. LTO underwent a pressure-induced amorphization (PIA) at 26.9 GPa. The impedance spectroscopy revealed that the conductivity of LTO improved significantly after amorphization and that the conductivity of decompressed amorphous LTO increased by an order of magnitude compared with its starting phase. Furthermore, our calculations demonstrated that the different compressibility of the LiO6 and TiO6 octahedra in the structure was crucial for the PIA. The amorphous phase promotes Li+ diffusion and enhances its ionic conductivity by providing defects for ion migration. Our results not only provide an insight into the pressure depended structural properties of a spinel-like material, but also facilitate exploration of the interplay between PIA and conductivity.

Photoresponse of a Single Y-Junction Carbon Nanotube.

We report investigation of optical response in a single strand of a branched carbon nanotube (CNT), a Y-junction CNT composed of multiwalled CNTs. The experiment was performed by connecting a pair of branches while grounding the remaining one. Of the three branch combinations, only one combination is optically active which also shows a nonlinear semiconductor-like I-V curve, while the other two branch combinations are optically inactive and show linear ohmic I-V curves. The photoresponse includes a zero-bias photocurrent from the active branch combination. Responsivity of ≈1.6 mA/W has been observed from a single Y-CNT at a moderate bias of 150 mV with an illumination of wavelength 488 nm. The photoresponse experiment allows us to understand the nature of internal connections in the Y-CNT. Analysis of data locates the region of photoactivity at the junction of only two branches and only the combination of these two branches (and not individual branches) exhibits photoresponse upon illumination. A model calculation based on back-to-back Schottky-type junctions at the branch connection explains the I-V data in the dark and shows that under illumination the barriers at the contacts become lowered due to the presence of photogenerated carriers.

Low-frequency flicker noise in a MSM device made with single Si nanowire (diameter ≈ 50 nm).

: Low-frequency flicker noise has been measured in a metal-semiconductor-metal (MSM) device made from a single strand of a single crystalline Si nanowire (diameter approximately 50 nm). Measurement was done with an alternating current (ac) excitation for the noise measurement superimposed with direct current (dc) bias that can be controlled independently. The observed noise has a spectral power density ∝1/fα. Application of the superimposed dc bias (retaining the ac bias unchanged) with a value more than the Schottky barrier height at the junction leads to a large suppression of the noise amplitude along with a change of α from 2 to ≈ 1. The dc bias-dependent part of the noise has been interpreted as arising from the interface region. The residual dc bias-independent flicker noise is suggested to arise from the single strand of Si nanowire, which has the conventional 1/f spectral power density.

Investigation of very low-frequency noise in ferromagnetic nickel nanowires.

In this paper we report very low-frequency (0.1 mHz-1.0 Hz) resistance fluctuation (noise) in Nickel nanowires of diameter 20 nm in the temperature range 77 K-300 K. The wires are one-dimensional magnetic systems since the diameter is less than the domain wall width. We found a clear signature of deviation of the spectral power from 1/f noise at low frequencies showing excess fluctuations with very slow dynamics. The magnitude of resistance fluctuations increases by an order of magnitude when the diameter of the wires is reduced below the domain wall width of nickel. The excess resistance fluctuation has been linked to thermally activated magnetization reversal and the associated domain wall motion.