RÉSUMÉ
In January 2020, the World Health Organization (WHO) identified a new zoonotic virus, SARS-CoV-2, responsible for causing the COVID-19 (coronavirus disease 2019). Since then, there has been a collaborative trend between the scientific community and industry. Multidisciplinary research networks try to understand the whole SARS-CoV-2 pathophysiology and its relationship with the different grades of severity presented by COVID-19. The scientific community has gathered all the data in the quickly developed vaccines that offer a protective effect for all variants of the virus and promote new diagnostic alternatives able to have a high standard of efficiency, added to shorter response analysis time and portability. The industry enters in the context of accelerating the path taken by science until obtaining the final product. In this review, we show the principal diagnostic methods developed during the COVID-19 pandemic. However, when we observe the diagnostic tools section of an efficient infection outbreak containment report and the features required for such tools, we could observe a highlight of electrochemical biosensing platforms. Such devices present a high standard of analytical performance, are low-cost tools, easy to handle and interpret, and can be used in the most remote and low-resource regions. Therefore, probably, they are the ideal point-of-care diagnostic tools for pandemic scenarios.
RÉSUMÉ
This study reports the development of a new PCR-free device, using IS6110 gene as biomarker, for Tuberculosis (TB) diagnosis. An arginine film (ARGFILM) was used to prepare the biosensor platform. MT-probe was immobilized on this biosensor platform to identify IS6110 gene. This gene is an excellent biomarker for Mycobacterium tuberculosis (MT). Electrochemical analyses were carried out using differential pulse voltammetry method (DPV) by methylene blue (MB) reduction signal measurement before and after hybridization either between probe and synthetic target or extracted DNA from clinical sputum samples. The optimization study of MT-probe immobilization on modified-electrode surface showed that the best probe concentration was 15 µM. The analytical analysis of hybridization assays was performed using different concentrations of synthetic MT-target (15-500 nM). The linear response was between 15 and 100 nM and the detection limit was 4.4 nM. The biosensor performance was also investigated with extracted DNA from sputum samples (PCR-free). The results showed that the biosensor was able to detect the MT from samples, exhibiting a high sensitivity and satisfactory selectivity. Thus, these results allow for the possibility of developing a portable detection device for effective diagnosis of TB patients.
Sujet(s)
Techniques bactériologiques , Techniques de biocapteur , ADN bactérien/génétique , Mycobacterium tuberculosis/génétique , Analyse sur le lieu d'intervention , Expectoration/microbiologie , Tuberculose pulmonaire/diagnostic , ADN bactérien/isolement et purification , Techniques électrochimiques , Humains , Mycobacterium tuberculosis/isolement et purification , Valeur prédictive des tests , Reproductibilité des résultats , Tuberculose pulmonaire/microbiologieRÉSUMÉ
The objective of this study was to analyse the co-contraction behaviour of jaw and neck muscles during force-controlled experimental grinding in the supine position. Twelve symptom-free subjects were enrolled in the experimental study. Electromyographic (EMG) activity of semispinalis capitis, splenius capitis and levator scapulae muscles was recorded bilaterally with intramuscular fine-wire electrodes, whereas that of sternocleidomastoideus, infrahyoidal, suprahyoidal, masseter and anterior temporalis muscles were registered with surface electrodes. EMG and force measurements were performed during tasks simulating tooth grinding on custom-made intraoral metal splints. The mean EMG activity normalised by maximum voluntary contraction (% MVC) of each of the neck muscles studied during grinding was analysed and compared with previous data from jaw clenching at identical force (100 N) and (supine) position. The occurrence of low-level, long-lasting tonic activation (LLTA) of motor units was also documented. The mean three-dimensional force vector of the grinding forces was 106 ± 74 N. In the frontal plane, the incline to the midsagittal plane ranged between 10° and 15°. In the midsagittal plane, the incline to the frontal plane was negligibly small. Posterior neck muscle activity during grinding ranged between 4.5% and 12% MVC and during clenching with 100 N between 1.8% and 9.9% MVC. Masticatory muscle activity during grinding ranged between 17% and 21% MVC for contralateral masseter and ipsilateral temporalis and between 4% and 6.5% for ipsilateral masseter and contralateral temporalis. LLTA had an average duration of 195 ± 10 seconds. The findings from this study do not support pathophysiological muscle chain theories postulating simple biomechanical coupling of neck and jaw muscles. Co-contractions of neck and masticatory muscles may instead occur as a result of complex neurophysiological interactions.
Sujet(s)
Bruxisme/physiopathologie , Électromyographie , Mastication/physiologie , Muscles masticateurs/physiopathologie , Contraction musculaire/physiologie , Muscles du cou/physiologie , Adulte , Force occlusale , Femelle , Humains , Mâle , Décubitus dorsal/physiologieRÉSUMÉ
Although knowledge of short-range kinetic interactions between antagonistic teeth during mastication is of essential importance for ensuring interference-free fixed dental reconstructions, little information is available. In this study, the forces on and displacements of the teeth during kinetic molar biting simulating the power stroke of a chewing cycle were investigated by use of a finite-element model that included all the essential components of the human masticatory system, including an elastic food bolus. We hypothesised that the model can approximate the loading characteristics of the dentition found in previous experimental studies. The simulation was a transient analysis, that is, it considered the dynamic behaviour of the jaw. In particular, the reaction forces on the teeth and joints arose from contact, rather than nodal forces or constraints. To compute displacements of the teeth, the periodontal ligament (PDL) was modelled by use of an Ogden material model calibrated on the basis of results obtained in previous experiments. During the initial holding phase of the power stroke, bite forces were aligned with the roots of the molars until substantial deformation of the bolus occurred. The forces tilted the molars in the bucco-lingual and mesio-distal directions, but as the intrusive force increased the teeth returned to their initial configuration. The Ogden material model used for the PDL enabled accurate prediction of the displacements observed in experimental tests. In conclusion, the comprehensive kinetic finite element model reproduced the kinematic and loading characteristics of previous experimental investigations.
Sujet(s)
Restaurations dentaires permanentes/méthodes , Analyse des éléments finis , Mastication/physiologie , Muscles masticateurs/anatomie et histologie , Articulation temporomandibulaire/anatomie et histologie , Adulte , Voies afférentes , Phénomènes biomécaniques , Force occlusale , Simulation numérique , Restaurations dentaires permanentes/instrumentation , Denture , Humains , Imagerie tridimensionnelle , Cinétique , Mâle , Modèles anatomiques , Ajustement occlusal , Desmodonte/anatomie et histologie , Contrainte mécanique , Articulation temporomandibulaire/physiologieRÉSUMÉ
OBJECTIVE: To study motor unit activity in the medio-lateral extension of the masseter using an adapted scanning EMG technique that allows studying the territories of multiple motor units (MUs) in one scan. METHODS: We studied the m. masseter of 10 healthy volunteers in whom two scans were performed. A monopolar scanning needle and two pairs of fine-wire electrodes were inserted into the belly of the muscle. The signals of the fine wire electrodes were decomposed into the contribution of single MUs and used as a trigger for the scanning needle. In this manner multiple MU territory scans were obtained simultaneously. RESULTS: We determined 161 MU territories. The maximum number of territories obtained in one scan was 15. The median territory size was 4.0mm. Larger and smaller MU territories were found throughout the muscle. CONCLUSIONS: The presented technique showed its feasibility in obtaining multiple MU territories in one scan. MUs were active throughout the depth of the muscle. SIGNIFICANCE: The distribution of electrical and anatomical size of MUs substantiates the heterogeneous distribution of MUs throughout the muscle volume. This distributed activity may be of functional significance for the stabilization of the muscle during force generation.
Sujet(s)
Électromyographie/méthodes , Muscle masséter/physiologie , Contraction musculaire/physiologie , Recrutement neurophysiologique/physiologie , Adulte , Femelle , Humains , MâleRÉSUMÉ
Strategies for recruitment of masseter muscle motor units (MUs), provoked by constant bite force, for different vertical jaw relations have not previously been investigated. The objective of this study was to analyse the effect of small changes in vertical jaw relation on MU recruitment behaviour in different regions of the masseter during feedback-controlled submaximum biting tasks. Twenty healthy subjects (mean age: 24·6 ± 2·4 years) were involved in the investigation. Intra-muscular electromyographic (EMG) activity of the right masseter was recorded in different regions of the muscle. MUs were identified by the use of decomposition software, and root-mean-square (RMS) values were calculated for each experimental condition. Six hundred and eleven decomposed MUs with significantly (P < 0·001) different jaw relation-specific recruitment behaviour were organised into localised MU task groups. MUs with different task specificity in seven examined tasks were observed. The RMS EMG values obtained from the different recording sites were also significantly (P < 0·01) different between tasks. Overall MU recruitment was significantly (P < 0·05) greater in the deep masseter than in the superficial muscle. The number of recruited MUs and the RMS EMG values decreased significantly (P < 0·01) with increasing jaw separation. This investigation revealed differential MU recruitment behaviour in discrete subvolumes of the masseter in response to small changes in vertical jaw relations. These fine-motor skills might be responsible for its excellent functional adaptability and might also explain the successful management of temporomandibular disorder patients by somatic intervention, in particular by the use of oral splints.
Sujet(s)
Électromyographie , Muscle masséter/physiologie , Contraction musculaire/physiologie , Recrutement neurophysiologique/physiologie , Analyse de variance , Force occlusale , Occlusion dentaire , Femelle , Volontaires sains , Humains , Mâle , Muscle masséter/imagerie diagnostique , Jeune adulteRÉSUMÉ
Several studies have confirmed the neuromuscular effects of jaw motor activity on the postural stability of humans, but the mechanisms of functional coupling of the craniomandibular system (CMS) with human posture are not yet fully understood. The purpose of our study was, therefore, to investigate whether submaximum biting affects the kinematics of the ankle, knee, and hip joints and the electromyographic (EMG) activity of the leg muscles during bipedal narrow stance and single-leg stance. Twelve healthy young subjects performed force-controlled biting (FB) and non-biting (NB) during bipedal narrow stance and single-leg stance. To investigate the effects of FB on the angles of the hip, knee, and ankle joints, a 3D motion-capture system (Vicon MX) was used. EMG activity was recorded to enable analysis of the coefficient of variation of the muscle co-contraction ratios (CVR) of six pairs of postural muscles. Between FB and NB, no significant differences were found for the mean values of the angles of the ankle, knee, and hip joints, but the standard deviations were significantly reduced during FB. The values of the ranges of motion and the mean angular velocities for the three joints studied revealed significant reduction during FB also. CVR was also significantly reduced during FB for five of the six muscle pairs studied. Although submaximum biting does not change the basic strategy of posture control, it affects neuromuscular co-contraction patterns, resulting in increased kinematic precision.
Sujet(s)
Phénomènes biomécaniques/physiologie , Force occlusale , Électromyographie , Équilibre postural/physiologie , Femelle , Humains , Articulation du genou/physiologie , Mâle , Contraction musculaire , Muscles squelettiques/physiologie , Jonction neuromusculaire/physiologie , Amplitude articulaire/physiologie , Jeune adulteRÉSUMÉ
Human posture is characterised by inherent body sway which forces the sensory and motor systems to counter the destabilising oscillations. Although the potential of biting to increase postural stability has recently been reported, the mechanisms by which the craniomandibular system (CMS) and the motor systems for human postural control are functionally coupled are not yet fully understood. The purpose of our study was, therefore, to investigate the effect of submaximum biting on postural stability and on the kinematics of the trunk and head. Twelve healthy young adults performed force-controlled biting (FB) and non-biting (NB) during bipedal narrow stance and single-leg stance. Postural stability was quantified on the basis of centre of pressure (COP) displacements, detected by use of a force platform. Trunk and head kinematics were investigated by biomechanical motion analysis, and bite forces were measured using a hydrostatic system. The results revealed that FB significantly improved postural control in terms of reduced COP displacements, providing additional evidence for the functional coupling of the CMS and human posture. Our study also showed, for the first time, that reductions in the sway of the COP were accompanied by reduced trunk and head oscillations, which might be attributable to enhanced trunk stiffness during FB. This physiological response to isometric activation of the masticatory muscles raises questions about the potential of oral motor activity as a strategy to reduce the risk of falls among the elderly or among patients with compromised postural control.
Sujet(s)
Force occlusale , Équilibre postural/physiologie , Posture/physiologie , Phénomènes biomécaniques/physiologie , Femelle , Humains , Mâle , Pression , Jeune adulteRÉSUMÉ
Immediate adaptation to experimental-balancing interferences is known to affect jaw kinematics and electromyographic activity (EMG). However, little is known about the influence on masticatory performance parameters. This study hypothesises that balancing-side interferences significantly reduce the performance of the masticatory system. Twenty-one healthy subjects (eleven female, mean age: 24.1 ± 1.2 years) chewed standardised silicone cubes performing 15 masticatory cycles on the right side under three experimental conditions: (i) natural dentition (ND), (ii) splints with structured occlusal profiles (SS) (iii) splints with balancing interferences in the left molar region (OI). The particle size distribution was determined by a validated scanning procedure and curve fitted with the Rosin-Rammler function to determine X(50)-values. The EMG of both temporalis and masseter muscles was recorded simultaneously, and the total muscle work (TMW) was calculated. A jaw-tracking device recorded the incisal movement path (IMP). The functional parameters under the experimental conditions were compared by repeated-measures analysis of variance. The findings confirm our hypothesis. The X(50)-values differed significantly (P < 0.01) between ND and OI (4.34 vs. 4.60 mm), and between SS and OI (4.34 vs. 4.60 mm), respectively. In contrast, no significant differences (P > 0.05) were observed between SS and ND. There was no significant difference in both TMW (1269.0 vs. 1284.9 vs. 1193.9 µV*s) and IMP (720.2 vs. 735.3 vs. 723.1 mm) amongst the three conditions (P > 0.05). These findings confirm the assumption that the disturbance of the habitual chewing cycles by balancing-side interferences significantly reduces the masticatory performance in the short term. Occlusal balancing-side interferences are common technical failures of dental restorations. Simulation of this condition caused deterioration of masticatory performance in healthy young adults. Further studies should be carried out, on whether the observed effect is long-term and whether masticatory performance decreases even more in patients with reduced adaptive capacity.
Sujet(s)
Électromyographie , Mandibule/physiologie , Muscle masséter/physiologie , Mastication/physiologie , Mouvement/physiologie , Muscle temporal/physiologie , Adulte , Phénomènes biomécaniques , Occlusion dentaire , Femelle , Humains , Mâle , Gouttières occlusales , Amplitude articulaireRÉSUMÉ
Localised motor-unit (MU) recruitment in the masseter was analysed in this study. We investigated whether differential activation behaviour, which has already been reported for distant masseter regions, can also be detected in small muscle subvolumes at the level of single MUs. Two bipolar fine-wire electrodes and an intra-oral 3D bite-force transmitter were used to record intra-muscular electromyograms (EMG) resulting from controlled bite-forces of 10 healthy human subjects (mean age 24.1 ± 1.2 years). Two-hundred and seventeen decomposed MUs were organised into localised MU task groups with different (P < 0.001) force-direction-specific behaviour. Proportions of MUs involved in one, two, three or four examined tasks were 46%, 31%, 18% and 5%, respectively. This study provides evidence of the ability of the neuromuscular system to modify the mechanical output of small masseter subvolumes by differential control of adjacent MUs belonging to distinct task groups. Localised differential activation behaviour of the masseter may be the crucial factor enabling highly flexible and efficient adjustment of the muscle activity in response to complex local biomechanical needs, for example, continually varying bite-forces during the demanding masticatory process.
Sujet(s)
Muscle masséter/physiologie , Contraction musculaire/physiologie , Recrutement neurophysiologique/physiologie , Adulte , Force occlusale , Électrodes , Électromyographie/méthodes , Femelle , Humains , Mâle , Jeune adulteRÉSUMÉ
AIMS: To analyse the performance of RT-qPCR using 85B mRNA in the diagnosis of Mycobacterium tuberculosis infection and in the assessment of the response to treatment for pulmonary tuberculosis (TB). METHODS AND RESULTS: Ninety-eight patients with signs of pulmonary TB were selected: 56 were considered infected with Myco. tuberculosis and they had positive cultures or evident clinical response to anti-TB treatment. Patients with pulmonary tuberculosis were evaluated by culture and RT-qPCR for a 30-day specific treatment. It was found that both tests demonstrated a decline in viable bacilli at 15 and 30 days after the beginning of the therapy in most of the patients. The quantification of the 85B mRNA target was performed in 52 patients who had initially shown positive results by RT-qPCR and who were followed on the days 15 and 30 after the specific treatment. Thus 85B mRNA was detectable in sputum samples in 52 patients with a confirmed diagnosis of pulmonary tuberculosis on day 0. During the specific treatment the 85B mRNA was detectable in 13 patients on day 15 and in only three patients on day 30. CONCLUSIONS: Mycobacterium tuberculosis mRNA in the sputum is a useful prognostic marker and its quantification, an early and reliable indicator for monitoring response to treatment, drug resistance, re-infection and relapse. SIGNIFICANCE AND IMPACT OF THE STUDY: RT-qPCR is a tool that can be used in clinical and therapeutic monitoring as an indicator of bacterial resistance and indicator of the period of transmissibility of Myco. tuberculosis in patients with pulmonary TB undergoing treatment.
Sujet(s)
Antituberculeux/usage thérapeutique , ADN bactérien/génétique , Mycobacterium tuberculosis/génétique , ARN bactérien/génétique , ARN messager/génétique , Tuberculose pulmonaire/diagnostic , Adolescent , Adulte , Sujet âgé , Marqueurs biologiques/métabolisme , ADN bactérien/isolement et purification , Surveillance des médicaments/méthodes , Femelle , Humains , Mâle , Adulte d'âge moyen , ARN bactérien/isolement et purification , ARN messager/isolement et purification , RT-PCR , Expectoration/microbiologie , Résultat thérapeutique , Tuberculose pulmonaire/traitement médicamenteux , Tuberculose pulmonaire/microbiologieRÉSUMÉ
OBJECTIVES: The primary goal of the present finite element (FE) analysis of a special removable prosthesis, the conical telescopic crown (CTC), was to validate established results based on a rigid model of the CTC and to analyze its characteristic features as a function of the essential material and geometric parameters. Furthermore, the effectiveness of a new element, the composite stop (CS), was investigated. MATERIALS AND METHODS: The study used an axisymmetric FE model containing the inner and outer crown including resin or ceramic veneer, the CS, the cement layer between the interior crown and the tooth, and the upper part of the tooth itself. RESULTS: For a convergence angle (half-cone angle) α = 4 degrees and a moderate chewing force F = 150 N the loosening force decreased from - 50 N without to - 10 N with CS. Increasing α values yielded a decrease of the loosening force. Adherence between the inner (IC) and outer crown (OC) was achieved for all configurations (α = 2 degrees, 4 degrees, and 6 degrees), except for zirconium crowns with α = 6 degrees. In systems without CS, the maximum tensile stress in the veneer increased proportionally to F, but remained limited in those with CS. CONCLUSIONS: The angle a and the coefficient of static friction µ0 emerged as the decisive parameters of the CTC. The computed fitting/loosening behavior agreed well with results of a simple rigid-body model and experiments. The incorporation of a CS allows ceramic veneering of the outer crown. CLINICAL RELEVANCE: The optimal angle α of the CTC is ascribed to a number of customary material combinations for IC and OC. The CS limits the loosening forces of the CTC to values which guarantee non-traumatic removal of the prosthesis.
Sujet(s)
Couronnes , Échec de restauration dentaire , Overdenture , Analyse des éléments finis , Phénomènes biomécaniques , Céramiques/composition chimique , Alliages de chrome/composition chimique , Résines composites/composition chimique , Simulation numérique , Alliage dentaire/composition chimique , Adaptation marginale (odontologie) , Matériaux dentaires/composition chimique , Conception de prothèse dentaire , Facettes dentaires , Alliages d'or/composition chimique , Humains , Mastication/physiologie , Modèles biologiques , Contrainte mécanique , Propriétés de surface , Résistance à la traction , Titane/composition chimique , Ciment phosphate zinc/composition chimique , Zirconium/composition chimiqueRÉSUMÉ
OBJECTIVE: The purpose of this study was to test the hypothesis that jaw clenching induces co-contraction and low-level long-lasting tonic activation (LLTA) of neck muscles in the supine position. DESIGN: Ten healthy subjects developed various feedback-controlled submaximum bite forces in different bite-force directions in supine position. The electromyographic (EMG) activity of the semispinalis capitis, semispinalis cervicis, multifidi, splenius capitis, levator scapulae, trapezius, sternocleidomastoideus, masseter and infra/supra-hyoidal muscles was recorded. For normalization of EMG data, maximum-effort tasks of the neck muscles were performed. RESULTS: Co-contractions of the posterior neck muscles varied between 2% and 11% of their maximum voluntary contraction. Different bite forces and bite-force directions resulted in significant (p<.05) activity differences between the co-contraction levels of the neck muscles. In addition, LLTA of specific neck muscles, provoked by the jaw clenching tasks, was observed. CONCLUSIONS: This study demonstrated for the first time moderate co-contractions of jaw and neck muscles in the supine position under controlled submaximum jaw clenching forces. LLTA of most neck muscles was observed, outlasting clenching episodes and indicating an additional neuromuscular interaction between the two muscle groups.
Sujet(s)
Force occlusale , Bruxisme/physiopathologie , Mâchoire/physiologie , Muscle masséter/physiologie , Contraction musculaire/physiologie , Muscles du cou/physiologie , Électromyographie/méthodes , Femelle , Humains , Imagerie par résonance magnétique , Mâle , Décubitus dorsal , Jeune adulteRÉSUMÉ
The third part of this literature review on the clinical relevance of surface electromyography (EMG) of the masticatory muscles summarizes the results of clinical studies in patients with temporomandibular disorders (TMD), preferably randomized controlled trials, examining the impact of changes to the dynamic occlusion. Clenching in left and right laterotrusive positions results in decrease in EMG activity of masseter and temporalis muscles on both working and non-working side. Masseter muscle exhibits largely uniform bilateral activity in laterotrusive positions, independent of canine guidance or group function with and without non-working side contacts. There is a dominance of temporalis muscle activity on the working side and, in case of posterior contacts and balancing contacts, temporalis muscle activity increases and changes from an unilateral to a symmetrical pattern.
Sujet(s)
Occlusion dentaire , Électromyographie/méthodes , Muscles masticateurs/physiopathologie , Troubles de l'articulation temporomandibulaire/physiopathologie , Humains , Muscle masséter/physiopathologie , Contraction musculaire/physiologie , Essais contrôlés randomisés comme sujet , Muscle temporal/physiopathologieRÉSUMÉ
Besides the different forms of odontalgia, myalgias of the masticatory muscles are the most frequent noninfectious complaints in the orofacial region. After summarizing the recommendations set forth by the Interdisciplinary Working Group of Orofacial Pain within the German Chapter of the IASP (German Pain Society), we present the current state of knowledge regarding the etiology, diagnosis, and therapeutic options, based on an extensive literature search. A systematic literature search was carried out in PubMed, the Cochrane Library, and the database of the Deutsche Zahnärztliche Zeitschrift. The results corroborate our previous recommendations that for the majority of patients pain reduction or pain relief can be achieved with noninvasive, reversible methods. Short- and long-term trials have added more evidence to the fact that different therapeutic measures have similar efficacy. In patients with chronic myalgias of the jaw muscles, involvement of a psychotherapist is crucial. Patient education, oral appliances, physiotherapeutic exercises, and acupuncture are recommended therapeutic measures, while physical therapy, pharmacotherapy, and psychological therapy received a limited recommendation.
Sujet(s)
Douleur chronique/thérapie , Algie faciale/thérapie , Muscles masticateurs , Myalgie/thérapie , Gestion de la douleur/méthodes , Douleur chronique/diagnostic , Douleur chronique/étiologie , Association thérapeutique , Comportement coopératif , Algie faciale/diagnostic , Algie faciale/étiologie , Humains , Communication interdisciplinaire , Myalgie/diagnostic , Myalgie/étiologie , Équipe soignante , PsychothérapieRÉSUMÉ
The second part of this review of the literature on the clinical significance of surface electromyography (EMG) of the masticatory muscles systematically examines the results of clinical studies in patients with temporomandibular disorders (TMD), preferably randomized controlled trials, investigating relevant aspects of EMG activity during prolonged chewing activity (fatigue effects), during the mastication process, and under the influence of different factors. Studies on the influence of factors such as gender, age, tooth status, orofacial morphology and (acute) pain, the significance of different occlusal relationships during static and dynamic occlusion, and the impact of changes in static occlusion on EMG activity of the masticatory muscles were included in the review.
Sujet(s)
Électromyographie/méthodes , Mastication/physiologie , Muscles masticateurs/physiopathologie , Fatigue musculaire/physiologie , Troubles de l'articulation temporomandibulaire/physiopathologie , Occlusion dentaire , Humains , Essais contrôlés randomisés comme sujet , Facteurs de risqueRÉSUMÉ
AIM: Evaluate the IS6110-Taqman system performance in sputum samples from patients with pulmonary tuberculosis from health services in north-eastern Brazil as a diagnostic laboratory tool for pulmonary tuberculosis. METHODS AND RESULTS: 165 sputum samples from respiratory symptomatic patients were evaluated in the IS6110-TaqMan assay: 66 patients with pulmonary tuberculosis and 99 without TB. When the IS6110-TaqMan assay was evaluated using culture and/or clinical response to the specific treatment as the gold standard, IS6110-TaqMan assay obtained a sensitivity of 87.9% and specificity of 98%. The performance of IS6110-TaqMan assay was also evaluated with the sputum smear microscopy, resulting in a sensitivity of 79.7% and specificity 94.8%. CONCLUSIONS: The IS6110-TaqMan was rapid, sensitive and specific for the diagnosis of pulmonary TB. SIGNIFICANCE AND IMPACT OF THE STUDY: IS6110-TaqMan assay is a promising auxiliary tool for the diagnosis of pulmonary TB when used in conjunction with routine laboratory tests, clinical and epidemiological criteria of the patient, thus increasing the sensitivity and specificity of diagnosis.
Sujet(s)
Réaction de polymérisation en chaine en temps réel/méthodes , Expectoration/microbiologie , Tuberculose pulmonaire/diagnostic , Adolescent , Adulte , Sujet âgé , Sujet âgé de 80 ans ou plus , Brésil , Femelle , Humains , Mâle , Adulte d'âge moyen , Mycobacterium tuberculosis , Sensibilité et spécificité , Jeune adulteRÉSUMÉ
OBJECTIVES: A key aspect of complex restorative therapy is reconstruction of a new three-dimensional jaw relation. The objective of this study was to test the hypotheses that the initially recorded jaw relation would deviate substantially from the jaw position of the prosthetic reconstruction and that activity ratios of the jaw muscles would be significantly different for each of these jaw positions. MATERIALS AND METHODS: In 41 healthy subjects, 41 examiners incorporated intraoral occlusal devices fabricated with all the technical details and procedures commonly used during prosthetic reconstructions. The jaw positions in centric relation with the incorporated occlusal devices were telemetrically measured in the condylar, first molar and incisal regions, relative to intercuspation. Electromyographic (EMG) activity of the temporalis and masseter muscles was recorded, and activity ratios were calculated for homonymous and heteronymous muscles. RESULTS: The recorded jaw relation differed significantly (p < 0.001) from the jaw position reconstructed with the intraoral occlusal devices. The initially recorded jaw relation was reproduced with the intraoral occlusal device with spatial accuracy of approximately 0.3 mm in the condylar, molar and incisal regions. The EMG ratios between centric relations and the reconstructed positions were significantly different (p < 0.05) for the temporal muscle and the temporalis/masseter ratio. CONCLUSIONS: The findings revealed that three-dimensional jaw-relation recording may be reproduced in a simulated prosthetic reconstruction within the accuracy reported for replicate intraoral bite recordings. CLINICAL RELEVANCE: Centric relation recordings may be reproduced in a prosthetic reconstruction with the spatial accuracy of 0.3 mm.
Sujet(s)
Conception de prothèse dentaire , Enregistrement des rapports intermaxillaires/méthodes , Résines acryliques/composition chimique , Relation centrée , Articulateurs dentaires , Matériaux empreinte dentaire/composition chimique , Occlusion dentaire centrée , Électromyographie , Femelle , Humains , Imagerie tridimensionnelle/méthodes , Incisive/anatomie et histologie , Enregistrement des rapports intermaxillaires/instrumentation , Mâle , Mandibule/anatomie et histologie , Condyle mandibulaire/anatomie et histologie , Muscle masséter/physiologie , Méthacrylates de méthyle/composition chimique , Modèles dentaires , Molaire/anatomie et histologie , Contraction musculaire/physiologie , Télémétrie/instrumentation , Muscle temporal/physiologie , Interface utilisateur , Jeune adulteRÉSUMÉ
The relationship between the dental occlusion and temporomandibular disorders (TMDs) has been one of the most controversial topics in the dental community. In a large epidemiological cross-sectional survey - the Study of Health in Pomerania (Germany) - associations between 15 occlusion-related variables and TMD signs or symptoms were found. In other investigations, additional occlusal variables were identified. However, statistical associations do not prove causality. By using Hill's nine criteria of causation, it becomes apparent that the evidence of a causal relationship is weak. Only bruxism, loss of posterior support and unilateral posterior crossbite show some consistency across studies. On the other hand, several reported occlusal features appear to be the consequence of TMDs, not their cause. Above all, however, biological plausibility for an occlusal aetiology is often difficult to establish, because TMDs are much more common among women than men. Symptom improvement after insertion of an oral splint or after occlusal adjustment does not prove an occlusal aetiology either, because the amelioration may be due to the change of the appliance-induced intermaxillary relationship. In addition, symptoms often abate even in the absence of therapy. Although patients with a TMD history might have a specific risk for developing TMD signs, it appears more rewarding to focus on non-occlusal features that are known to have a potential for the predisposition, initiation or perpetuation of TMDs.
Sujet(s)
Malocclusion dentaire , Troubles de l'articulation temporomandibulaire , Adolescent , Adulte , Sujet âgé , Sujet âgé de 80 ans ou plus , Causalité , Enfant , Femelle , Humains , Mâle , Malocclusion dentaire/complications , Malocclusion dentaire/épidémiologie , Adulte d'âge moyen , Facteurs de risque , Facteurs sexuels , Troubles de l'articulation temporomandibulaire/complications , Troubles de l'articulation temporomandibulaire/épidémiologie , Jeune adulteRÉSUMÉ
Aim of this study was to introduce a feasible and valid technique for the assessment of masticatory performance that is comparable to the standard sieving method. Twenty-one chewing samples (Optosil) comminuted by healthy dentate adults were analysed with a sieving and scanning method. Scanning was performed using a conventional flatbed scanner (1200dpi). All scanned images underwent image analysis (ImageJ), which yielded descriptive parameters such as area, best-fitting ellipse for each particle. Of the 2D-image, a volume was estimated for each particle, which was converted into a weight. To receive a discrete distribution of particle sizes comparable to sieving, five chewing samples were used to calculate a size-dependent area-volume-conversion factor. The sieving procedure was carried out with a stack of 10 sieves, and the retained particles per sieve were weighed. The cumulated weights yielded by either method were curve-fitted with the Rosin-Rammler distribution to determine the median particle size x(50) . The Rosin-Rammler distributions for sieving and scanning resemble each other. The distributions show a high correlation (0·919-1·0, n= 21, P<0·01, Pearson's correlation coefficient). The median particle sizes vary between 3·83 and 4·77mm (mean: 4·31) for scanning and 3·53 and 4·55mm (mean: 4·21) for sieving. On average, scanning overestimates the x(50) values by 2·4%. A modified Bland-Altman plot reveals that 95% of the x(50) values fall within 10% of the average x(50) . The scanning method is a valid, simple and feasible method to determine masticatory performance.