Environmental fate of microplastics in alpine and canyon-type river-cascade reservoir systems: Large-scale investigation of the Yalong River in the eastern Qinghai-Tibet Plateau.

Reservoirs are regarded as potential collection sites for microplastics (MPs), and ample water resources in plateau regions provide favorable natural conditions for hydroelectric power generation. However, research on the impact of cascade reservoir construction in the plateau region on the fate of MPs within the watershed is limited. In this study, the Yalong River, an alpine canyon river in the eastern Qinghai-Tibet Plateau, was selected as the research area. This study explored the distribution of MPs at various depths in water, sediment, and riverbank soil as well as the formation of "MP communities" within the river-cascade reservoir system. Furthermore, the effects of dam construction on MPs' migration in different environments were analyzed. The results revealed that the abundance of MPs in the water and sediment within the cascade reservoir area (CRA) was significantly higher than that in the river area (RA) (P < 0.001). Additionally, the trend of increasing MPs in water with decreasing altitude was notably slower in CRA. Regarding shape, the proportion of fibers in the water within the CRA was significantly lower than that in the RA, with a smaller vertical migration rate in the water than in the sediment. The proportion of MPs < 500 µm in the water within the CRA was significantly higher than that in the RA. High-density MPs were notably deposited in the reservoir sediments. The analysis of the MP communities revealed that the construction of cascade dams led to relative geographical isolation between different sampling sites, reducing the similarity of MP communities in the CRA. This study established a theoretical foundation for understanding the impact of cascade dam construction on the fate characteristics of MPs and their potential risks in plateau areas.

Adsorption of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar to Sb3+: Application of DFT calculation.

The pollution and harm of Sb3+ to aquatic systems is a global problem, so Sb3+ removal from the water environment to make sure environment safety and human beings wellbeing is of urgency. This study explored the effect of chitosan combined with nicotinamide-modified eupatorium adenophorum biochar (CEBC) on adsorbing Sb3+ through batch adsorption experiments. The experiments indicated CEBC's maximum adsorption capacity to Sb3+ is 170.15 mg·g-1. Meanwhile, the capacity of the original biochar (EBC) is only 9.97 mg·g-1. Compared with EBC, CEBC contains more functional groups, such as CO, -OH and -NH2. In addition, the pseudo-second-order kinetic model and the Langmuir model are fit to describe the kinetics and isotherms of adsorption of CEBC to Sb3+, which suggests that the adsorption of CEBC to Sb3+ is dominated by monolayer chemisorption. Density functional theory (DFT) calculations confirmed that the chelation between -NH2 and Sb3+ is of significance in the adsorption process of CEBC. DFT calculations also found that the newly added -OH and CO in EBC have a synergistic enhancement effect on the absorption of Sb3+. The mechanism of CEBC absorbing Sb3+ includes electrostatic interactions, pore filling, Л-Л interactions, hydrogen bonding, functional group complexation, chelation, and oxidation. CEBC has an excellent anti-interference ability for inorganic anions (NO3-, SO42- and Cl-) and can also use the coexisting HA to improve its adsorption performance. In addition, CEBC has better mitigation of Sb3+ on the performance of Sb3+ about its secondary release and good reproducibility, which indicates that CEBC is a viable Sb3+ adsorbent.

COL11A1-driven positive feedback loop modulates fibroblast transformation and activates pancreatic cancer progression.

Pancreatic ductal adenocarcinoma (PDAC) is one of the most common leading causes of cancer death. The cancer-associated fibroblasts (CAFs) in the tumor microenvironment (TME) aggravate the malignant behavior of PDAC. However, it is still unknown how PDAC induces normal fibroblasts (NFs) to CAFs. In present research, we found that PDAC-derived collagen type XI alpha 1 (COL11A1) promoted the conversion of NFs to CAF-like cells. It included morphological and corresponding molecular marker changes. Activation of the nuclear factor-κB (NF-κB) pathway was involved in this process. Corresponding, CAFs cells could secrete interleukin 6 (IL-6), which promoted the invasion and the epithelial-mesenchymal transition of PDAC cells. Furthermore, IL-6 promoted the expression of transcription factor Activating Transcription Factor 4 by activating the Mitogen-Activated Protein Kinase/extracellular-signal-regulated kinase pathway. The latter directly promotes the expression of COL11A1. This way, a feedback loop of mutual influence was constructed between PDAC and CAFs. Our research proposed a novel concept for PDAC-educated NFs. PDAC-COL11A1-fibroblast-IL-6-PDAC axis might contribute to the cascade between PDAC and TME.

Effects of irrigation on the fate of microplastics in typical agricultural soil and freshwater environments in the upper irrigation area of the Yellow River.

Agricultural activities are among the most significant sources of microplastics (MPs) in water. However, few studies have explored the effect of irrigation on the fate of MPs in agricultural systems. This study investigated the distribution of MPs in agricultural soil, surface water, and sediment of adjacent rivers, as well as the "MP communities" in various environments before and after irrigation in a typical agricultural irrigation area of the Yellow River. MPs were detected in all of the examined sites. The number of MPs in surface water and sediment increased after irrigation, whereas those in the surface soil of croplands decreased. In the vertical direction, irrigation accelerated the migration of MPs (< 100 µm) deep into the soil. The vertical mobility of fibers in soil was faster than that of other types of MPs. Moreover, irrigation decreased the correlation between soil properties and MPs in soils. MP community analysis indicated that irrigation enhanced the differences between MP communities among adjacent environments. Collectively, our findings confirmed that river water irrigation caused secondary MP pollution in the soil environment and accelerated MP pollution in deep soil. Therefore, this study provides a theoretical basis for the development of strategies for MP pollution control in agricultural soil.

A magnetic MIL-125-NH2@chitosan composite as a separable adsorbent for the removal of Cr(VI) from wastewater.

Metal-organic frameworks (MOFs) are gradually used since of their huge specific surface area and superior pore structure. However, there are problems such as easy aggregation and difficult separation in water treatment. In this study, we prepared composite microspheres (FMCS-1) by modifying MIL-125-NH2 with Fe3O4 and chitosan. The structural characterization and performance analysis of the materials showed that the introduction of chitosan effectively prevents the stacking of MOFs. The magnetic test manifested that Fe3O4 solved the problem of the difficult separation of MOFs from water. The removal potential of toxic Cr(VI) was tested by adsorption experiments. The isotherm model indicated that FMCS-1 is a single molecular layer adsorbent with a maximum adsorption capacity of 109.46 mg/g at pH = 2. The adsorption kinetics showed that the adsorption of Cr(VI) by FMCS-1 was chemical adsorption. The acid resistance test demonstrated that FMCS-1 can exist stably in acid solutions. The recycling experiments proved that the adsorbent can be reused and the removal percentage still reaches 50 % after 5 cycles. This work expands the application of MOFs in water treatment and also provides an effective adsorbent for Cr(VI) removal.

Removal and Mechanism of Cadmium, Lead and Copper in Water by Functional Modification of Silkworm Excrement Biochar.

A new type of biochar, called GBC, was prepared from silkworm excrement, and then modified by chitosan combined with pyromellitic dianhydride. The removal of mono-metal and polymetals (Pb, Cd and Cu) from an aqueous solution by GBC was investigated in this research. Compared to unmodified biochar, the removal rate of Pb and Cd by GBC was about 12% higher, while that of Cu was about 94.6% higher. It also shows the types of functional groups in biochar have a great impact on their adsorption. The removal of Pb is mainly involved in the N-C=O functional group, the removal of Cd is mainly involved in N-containing functional group and C=C bond, and that of Cu is mainly involved in N-containing functional group, carboxyl group, hydroxyl group, and a carbonyl group. Five adsorption-desorption cycles of GBC were carried out, and it was found that the adsorption capacities of GBC for Pb, Cd and Cu decreased by 7.28%, 10.78% and 6.07%, respectively, indicating that GBC had a good renewable performance. The adsorption capacity of GBC for Cu in different water samples is between 89.62 and 93.47 mg·g-1, indicating that GBC has great application potential for the removal of Cu in wastewater.

Horizontal and vertical distribution of microplastics in dam reservoir after impoundment.

In freshwater ecosystems, microplastics (MPs) are commonly found in reservoirs. However, limited information is available on the distribution of MPs in the reservoirs. In this study, we investigated the horizontal and vertical distribution characteristics of MPs in the Guanyingyan reservoir (the upper reaches of the Yangtze River, China) after impoundment and the influence of free-floating plant residues on the distribution of MPs. Results indicated that the MPs abundance in the horizontal distribution of the reservoir decreased significantly while the distance from the dam increased. The abundance of MPs in shoreline waters (average: 8.45 items L-1) was significantly higher than that in central waters (average: 4.80 items L-1). As for the vertical distribution, the percentages of fibers in the three water layers (surface, intermediate, and deep) have less variation when compared to other types of MPs. Besides, MPs who are less than 0.5 mm in size are the majority. With deeper underwater, there would be more MPs with particles smaller than 200 µm in size. At the same time, there would be fewer MPs with particles ranging from 200 to 500 µm in size. PS, PP, and PE are the main polymer types of surface water, while PVC, PE, and PET are the common type in deep water. In shoreline water, the dry weight of floating plant residues showed a positive correlation with microplastic abundance in different layers. As above said, this study confirmed that MPs in reservoirs after impoundment would tend to accumulate in the front section of the reservoir and the shoreline water. Besides, free-floating plant residues would accumulate in reservoirs, resulting in the sinking of MPs.

Spatial variability of microplastic pollution on surface of rivers in a mountain-plain transitional area: A case study in the Chin Ling-Wei River Plain, China.

Inland lakes and rivers are large reservoirs of microplastics. But currently, not too much research was done on microplastics of mountain rivers. The protection of water sources from microplastics is extremely significant for the safety of human drinking water. We quantified the distribution and variation of microplastics in the surface water from tributary (upstream water-source regions) to main stream (human settlements) in the Chin Ling-Wei River Plain Rivers, and assessed the pollution risk. Rivers in the Chin Ling-Wei River Plain contained various levels of microplastics (2.30-21.05 items/L), and the main stream of the river contained higher concentrations most commonly of microplastics than tributaries. The microplastics were fragments and films; they constituted 82.3% of the total abundance of microplastics. Microplastics with a particle size < 500 µm accounted for 64.3% of all the samples. As rivers flow from the mountains to the plains, the land-use types along the rivers become more multifunctional. Thus, the risk of river microplastic pollution increases sharply with distance downstream. Our research explored the microplastics pollution in the Chin Ling mountains based on topography and land-use types and thus provides a reference for further studies exploring the spatial distribution characteristics of microplastics in small-scale rivers and for pollution risk assessments.

Recovery of phosphate from aqueous solution by dewatered dry sludge biochar and its feasibility in fertilizer use.

Discharging of dewatered dry sludge into the environment can trigger irreversible environmental damage. The treatment of dewatered dry sludge into a valuable biochar product is essential for the sustainability of resources and environmental safety. In this study, we examined the removal of phosphate from water bodies by adsorption of biochar that had been prepared from dewatered dry sludge with different pyrolysis temperatures. We showed that being a composite material rich in carbon, CaO and MgO were produced in the biochar preparation when the pyrolysis temperature was increased to 700 °C. The phosphate adsorption of biochar has strengthened with the increase of pH. The phosphate adsorption of composite was fitted with the pseudo-second-order kinetic model, while the Langmuir adsorption isotherm model yielded a maximum phosphate adsorption of 51.79 mg/g. The phosphate adsorption by sludge biochar was mainly affected by the deposition of phosphate crystals and electrostatic attraction. Overall, biochar prepared from dewatered dry sludge demonstrated acceptable phosphate removal performance and phosphate-loaded biochar had a slow release of phosphorus, therefore, can be used as a phosphate fertilizer to promote plant growth.

Spatial distribution and human health risk assessment of soil heavy metals based on sequential Gaussian simulation and positive matrix factorization model: A case study in irrigation area of the Yellow River.

The content of Cd, Cu, Pb, Zn, Cr, Ni and As from 250 soil samples was measured in agricultural soil of Ningxia section of the Yellow River. Positive matrix factorization (PMF) was to identify the main sources of these heavy metals; Sequential Gaussian Simulation (SGS) was to identify their spatial distribution and high-risk areas; and Human Health risk (HHR) model was to measure the health risk. Results showed that the average content of Cd and As exceeds the risk screening value of "Soil Environmental Quality-Agricultural Land Soil Pollution Risk Control Standard" (GB 15618-2018), which belongs to slight-level pollution. Although the content of other types of HMs (Cu, Pb, Zn, Cr, Ni) is below the risk screening value, they are still included heavily in the soil (except Cr). PMF indicated that mixed sources of agriculture and industry accounted for 27.06%, natural sources accounted for 14.12%, industrial sources accounted for 23.04%, traffic sources accounted for 21.50%, and Yellow River sedimentary sources accounted for 14.28%. PMF-HHR showed that the mixed sources of agriculture and industry are the most important factor causing non-carcinogenic risk (HI) to children (accounting for 55.75%). Industrial sources and traffic sources were the two main factors that cause HI to adults (industrial sources accounted for 25.16%, and traffic sources accounted for 28.78%). Mixed sources of agriculture and industry and natural sources were the two main factors that cause carcinogenic risk (CR) (mixed sources of agriculture and industry account for 35.34%, and natural sources account for 33.23%). SGS indicated that 0.64% and 9.32% of the total areas were posing as higher HI areas to children and adults respectively; in particular, 0.68% and 1.12% of the areas were identified as higher HI of As and Cr areas at a critical probability of 0.9.

Chitosan crosslinked with polyamine-co-melamine for adsorption of Hg2+: Application in purification of polluted water.

A batch experiment was carried out in order to remove Hg2+ from the aqueous solution as well as the polluted water using modified chitosan (CS) with polyamine compounds (triethylenetetramine (TETA), tetraethylenepentamine (TEPA)), and melamine. The obtained polyamine-co-melamine crosslinked CS derivatives (MCS-4N and MCS-5N) were characterized and used as adsorbents. In comparison to the raw CS, the modification significantly promoted the adsorption of Hg2+ ions. The results of the pseudo-second-order kinetic model revealed that pH-dependent derivatives adsorbents achieved the equilibrium state within 12 h. The Langmuir model was best fitted with the Hg2+ adsorption isotherm and showed the highest adsorption capacities of 140.3 and 109.7 mg/g for MCS-4N and MCS-5N, respectively. A slight decrease in the adsorption efficiency of Hg2+ was noticed with the increment of the ionic strength of the solution. However, the studied adsorbents were easily regenerated and presented adequate reusability. The Hg2+ adsorption was regulated by the combined process of coordination reaction and electrostatic attraction as well. The as-prepared polyamine-co-melamine crosslinked CS derivatives were found potential adsorbents for the adsorptive capture of Hg2+ ions from aqueous solutions and polluted waters.

BATF3 promotes malignant phenotype of colorectal cancer through the S1PR1/p-STAT3/miR-155-3p/WDR82 axis.

Encouraging insight into novel underlying mechanisms targeting abnormal biological pathways in colorectal cancer (CRC) are currently under investigation, edging closer and closer to clinical use. Of note, basic leucine zipper ATF-like transcription factor 3 (BATF3) has been implicated with the tumorigenicity of CRC. The current study aimed to elucidate the oncogenic BATF3-mediated S1PR1/p-STAT3/miR-155-3p/WDR82 axis in CRC. Initially, clinical samples of CRC tissues as well as CRC cell lines were collected to evaluate the expression patterns of BATF3/S1PR1/p-STAT3/miR-155-3p/WDR82. Dual luciferase assay was employed to assess the binding affinity between miR-155-3p and WDR82. Artificial modulation of BATF3 (down- and overexpression) was conducted to measure the malignant phenotypes of CRC cells, while tumor-bearing mice were examined to determine the in vivo effects. BATF3 facilitated the proliferative, migratory, and invasive potential of CRC cells by upregulating S1PR1. Besides, the stimulatory effect of S1PR1 was realized via restored p-STAT3 expression. Furthermore, p-STAT3 was evidenced to heighten the expression of miR-155-3p and subsequently restrict the expression of its target gene WDR82. The in vivo assays provided data further substantiating the in vitro findings that inactivation of the BATF3/S1PR1/p-STAT3/miR-155-3p/WDR82 axis suppresses CRC tumor growth. Collectively, the results of the present study emphasize the oncogenic function of BATF3 illustrated by the reinforcement the biological processes of proliferation, invasion, as well as the metastatic capacity of CRC cells through activating the S1PR1/p-STAT3/miR-155-3p/WDR82 axis.

Microwave-assisted method to degrade phenol using persulfate or hydrogen peroxide catalyzed by Cu-bearing silicon carbide.

The radical generation properties of hydrogen peroxide and persulfate for phenol degradation were investigated under microwave irradiation using copper-doped silicon carbide (Cu/SiC) composites as catalyst. The results showed that 90% and 70% of phenol and total organic carbon (TOC), respectively, were removed within 7 min. Microwave activation of hydrogen peroxide and sodium persulfate in terms of thermal effects and accelerated electron transfer was analyzed by degradation kinetics and X-ray photoelectron spectroscopy (XPS). The microwave activation of Na2S2O8 demonstrated that the hot spots promote decomposition of persulfate more rapidly and the rate of persulfate decomposition was more than three times the activation rate of a normal heating method. There is a synergistic effect between Cu and microwave radiation, which is highlighted by the H2O2 activation; ·OH was generated due to the redox cycle between Cu(I)/Cu(II) and was responsible for phenol degradation using H2O2. High performance liquid chromatography (HPLC) analysis indicated that hydroxylation and sulfate radicals addition of phenol were the initial oxidation reaction steps of hydrogen peroxide and persulfate, respectively, followed by further oxidation to form short-chain carboxylic acids.

Soil Microbial Community and Its Interaction with Soil Carbon Dynamics Following a Wetland Drying Process in Mu Us Sandy Land.

Increasing drought globally is a severe threat to fragile desert wetland ecosystem. It is of significance to study the effects of wetland drying on microbial regulation of soil carbon (C) in the desert. In this study, we examined the impacts of wetland drying on microbial biomass, microbial community (bacteria, fungi) and microbial activity [basal microbial respiration, microbial metabolic quotient (qCO2)]. Relationships of microbial properties with biotic factors [litter, soil organic carbon (SOC), total nitrogen (TN), total phosphorus (TP)], abiotic factors (soil moisture, pH and clay content) and biological processes (basal microbial respiration, qCO2) were also developed. Results showed that the drying of wetland led to a decrease of soil microbial biomass carbon (MBC) content, microbial biomass nitrogen (MBN) content and fungi and bacterial abundance, and an increase of the fungi:bacteria ratio. Wetland drying also led to increased soil basal respiration and increased qCO2, which was attributed to lower soil clay content and litter N concentration. The MBC:SOC ratios were higher under drier soil conditions than under virgin wetland, which was attributed to stronger C conserve ability of fungi than bacteria. The wetland drying process exacerbated soil C loss by strengthening heterotrophic respiration; however, the exact effects of soil microbial community structure on microbial C mineralization were not clear in this study and need further research.

Studies on the reaction mechanism of Cu/SiC catalytic oxidation for degradation of methyl orange in presence of microwave.

The removal of methyl orange (MO) in a copper-loaded silicon carbide (Cu/SiC) system under microwave (MW) irradiation was studied. Cu/SiC was synthesized by employing an impregnation method and the effects of parameters such as reaction time, catalyst dosage, hydrogen peroxide (H2O2) dosage, microwave power and pH on the rate of degradation of MO were also studied. The obtained results showed that almost complete degradation was obtained in the presence of Cu/SiC catalyst within 8 min of irradiation when 100 mL of MO solution (20 mg/L), 3 ml/L of H2O2, 2 g/L of catalyst dose, 600 W of MW power, and pH 7 were applied. The Cu-bearing catalyst with H2O2 formed a Fenton-like system and the rate of generation of hydroxyl radicals (·OH) was also accelerated by subjecting to MW. From the kinetic analysis, it is revealed that the degradation of MO using the MW-Cu/SiC-H2O2 system follows the pseudo-first-order.