Harvesting insect pests for animal feed: potential to capture an unexploited resource.

The demand for animal protein grows as the human population increases. Technological and genetic advances in traditional animal agriculture will not produce enough protein to meet future needs without significant innovations such as the use of insects as protein sources. Insect farming is growing insects, whereas insect harvesting is collecting insects from their natural habitats to produce high-quality protein for animal feed or human food. Intensive agricultural environments produce tremendous quantities of pestiferous insects and with the right harvest technologies these insects can be used as a protein supplement in traditional animal daily rations. An avenue to exploit these insects is to use traps such as the United States Department of Agriculture-Biomass Harvest Trap (USDA-BHT) to efficiently attract, harvest, and store insects from naturally abundant agricultural settings. The modular design allows for a low cost, easy to build and fix device that is user friendly and has customizable attractants to target various pest species. Although insect harvesting faces substantial challenges, including insect biomass quantity, seasonal abundance and preservation, food safety, and economic and nutritional evaluation, the potential for utilizing these pests for protein shows tremendous promise. In this forum, insect harvesting is discussed, including its potential, limitations, challenges, and research needs. In addition, the use of a mass trapping device is discussed as a tool to increase the biomass of insects collected from the environment.

Conceptualization, design, and construction of a novel insect mass trapping device: the USDA Biomass Harvest Trap (USDA-BHT).

The use of insects as animal feed has the potential to be a green revolution for animal agriculture as insects are a rich source of high-quality protein. Insect farming must overcome challenges such as product affordability and scalability before it can be widely incorporated as animal feed. An alternative is to harvest insect pests from the environment using mass trapping devices and use them as animal feed. For example, intensive agricultural environments generate large quantities of pestiferous insects and with the right harvest technologies, these insects can be used as a protein supplement in traditional animal daily rations. Most insect trapping devices are limited by the biomass they can collect. In that context, and with the goal of using wild collected insects as animal feed, the United States Department of Agriculture-Biomass Harvest Trap (USDA-BHT) was designed and built. The USDA-BHT is a valuable mass trapping device developed to efficiently attract, harvest, and store flying insects from naturally abundant agricultural settings. The trap offers a modular design with adjustable capabilities, and it is an inexpensive device that can easily be built with commonly available parts and tools. The USDA-BHT is also user-friendly and has customizable attractants to target various pest species.

Assessment of the USDA Biomass Harvest Trap (USDA-BHT) device as an insect harvest and mosquito surveillance tool.

Insects are a promising source of high-quality protein, and the insect farming industry will lead to higher sustainability when it overcomes scaling up, cost effectiveness, and automation. In contrast to insect farming (raising and breeding insects as livestock), wild insect harvesting (collecting agricultural insect pests), may constitute a simple sustainable animal protein supplementation strategy. For wild harvest to be successful sufficient insect biomass needs to be collected while simultaneously avoiding the collection of nontarget insects. We assessed the performance of the USDA Biomass Harvest Trap (USDA-BHT) device to collect flying insect biomass and as a mosquito surveillance tool. The USDA-BHT device was compared to other suction traps commonly used for mosquito surveillance (Centers for Disease Control and Prevention (CDC) light traps, Encephalitis virus surveillance traps, and Biogents Sentinel traps). The insect biomass harvested in the USDA-BHT was statistically higher than the one harvested in the other traps, however the mosquito collections between traps were not statistically significantly different. The USDA-BHT collected some beneficial insects, although it was observed that their collection was minimized at night. These findings coupled with the fact that sorting time to separate the mosquitoes from the other collected insects was significantly longer for the USDA-BHT, indicate that the use of this device for insect biomass collection conflicts with its use as an efficient mosquito surveillance tool. Nevertheless, the device efficiently collected insect biomass, and thus can be used to generate an alternative protein source for animal feed.

Assessing the feasibility, safety, and nutritional quality of using wild-caught pest flies in animal feed.

Studies have investigated the potential of using farmed insects in animal feeds; however, little research has been done using wild-caught insects for this purpose. Concerns about inadequate quantities collected, environmental impacts, and the spread of pathogens contribute to the preferred utilization of farmed insects. Nevertheless, by harvesting certain pest species from intensified agricultural operations, producers could provide their animals with affordable and sustainable protein sources while also reducing pest populations. This study explores the possibility of collecting large quantities of pest flies from livestock operations and analyzes the flies' nutritional content, potential pathogen load, and various disinfection methods. Using a newly designed mass collection-trapping device, we collected 5 kg of biomass over 13 wk, primarily house flies, from a poultry facility. While a substantial number of pests were removed from the environment, there was no reduction in the fly population. Short-read sequencing was used to compare the bacterial communities carried by flies from differing source populations, and the bacterial species present in the fly samples varied based on farm type and collection time. Drying and milling the wild-caught flies as well as applying an additional heat treatment significantly reduced the number of culturable bacteria present in or on the flies, though their pathogenicity remains unknown. Importantly, these disinfection methods did not affect the nutritional value of the processed flies. Further research is necessary to fully assess the safety and viability of integrating wild-caught insects into livestock feed; however, these data show promising results in favor of such a system.

Culicoides-borne Orbivirus epidemiology in a changing climate.

Orbiviruses are of significant importance to the health of wildlife and domestic animals worldwide; the major orbiviruses transmitted by multiple biting midge (Culicoides) species include bluetongue virus, epizootic hemorrhagic disease virus, and African horse sickness virus. The viruses, insect vectors, and hosts are anticipated to be impacted by global climate change, altering established Orbivirus epidemiology. Changes in global climate have the potential to alter the vector competence and extrinsic incubation period of certain biting midge species, affect local and long-distance dispersal dynamics, lead to range expansion in the geographic distribution of vector species, and increase transmission period duration (earlier spring onset and later fall transmission). If transmission intensity is associated with weather anomalies such as droughts and wind speeds, there may be changes in the number of outbreaks and periods between outbreaks for some regions. Warmer temperatures and changing climates may impact the viral genome by facilitating reassortment and through the emergence of novel viral mutations. As the climate changes, Orbivirus epidemiology will be inextricably altered as has been seen with recent outbreaks of bluetongue, epizootic hemorrhagic disease, and African horse sickness outside of endemic areas, and requires interdisciplinary teams and approaches to assess and mitigate future outbreak threats.

Immigration and seasonal bottlenecks: high inbreeding despite high genetic diversity in an oscillating population of Culicoides sonorensis (Diptera: Ceratopogonidae).

Most population genetic studies concern spatial genetic differentiation, but far fewer aim at analyzing the temporal genetic changes that occur within populations. Vector species, including mosquitoes and biting midges, are often characterized by oscillating adult population densities, which may affect their dispersal, selection, and genetic diversity over time. Here, we used a population of Culicoides sonorensis from a single site in California to investigate short-term (intra-annual) and long-term (inter-annual) temporal variation in genetic diversity over a 3 yr period. This biting midge species is the primary vector of several viruses affecting both wildlife and livestock, thus a better understanding of the population dynamics of this species can help inform epidemiological studies. We found no significant genetic differentiation between months or years, and no correlation between adult populations and the inbreeding coefficient (FIS). However, we show that repeated periods of low adult abundance during cooler winter months resulted in recurring bottleneck events. Interestingly, we also found a high number of private and rare alleles, which suggests both a large, stable population, as well as a constant influx of migrants from nearby populations. Overall, we showed that the high number of migrants maintains a high level of genetic diversity by introducing new alleles, while this increased diversity is counterbalanced by recurrent bottleneck events potentially purging unfit alleles each year. These results highlight the temporal influences on population structure and genetic diversity in C. sonorensis and provide insight into factors effecting genetic variation that may occur in other vector species with fluctuating populations.

Are You Still Using 6-Volt Batteries for Your Insect Traps?

The most prevalent insect sampling and surveillance problem is powering insect traps in the field. Most modern light traps use 6-V power supplies such as the Centers for Disease Control and Prevention (CDC) suction trap. Buck converter modules efficiently reduce 12-V direct current power to 6-V, which permits the use of higher voltage batteries with lower voltage traps, resulting in longer operational duration and reduced labor requirements associated with replacing and recharging batteries in the field. We evaluated several battery configurations of 6- and 12-V lead-acid batteries in various sizes (10-20 ampere-hours) and addressed, in the circuit design, common problems that occur when using the buck converter (such as crossing polarity and excessive battery depletion). The efficacy of each configuration was assessed by measuring the voltage and suction while powering a 6-V CDC light trap. The buck converter permitted the use of cheaper and more commonly available 12-V batteries to run the CDC light traps and resulted in longer effective operation time as measured by air speed.

A Review of the Vector Status of North American Culicoides (Diptera: Ceratopogonidae) for Bluetongue Virus, Epizootic Hemorrhagic Disease Virus, and Other Arboviruses of Concern.

Purpose of Review: Culicoides biting midges transmit several pathogens of veterinary importance in North America, but the vector status of many midge species is unresolved. Additionally, the available evidence of vector competence in these species is scattered and variable. The purpose of this review is to summarize current knowledge on confirmed and putative North American Culicoides arbovirus vectors. Recent Findings: While the vector status of Culicoides sonorensis (EHDV, BTV, VSV) and Culicoides insignis (BTV) are well established, several other potential vector species have been recently identified. Frequently, these species are implicated based primarily on host-feeding, abundance, and/or detection of arboviruses from field-collected insects, and often lack laboratory infection and transmission data necessary to fully confirm their vector status. Recent genetic studies have also indicated that some wide-ranging species likely represent several cryptic species, further complicating our understanding of their vector status. Summary: In most cases, laboratory evidence needed to fully understand the vector status of the putative Culicoides vectors is absent; however, it appears that several species are likely contributing to the transmission of arboviruses in North America.

Development of microsatellite markers for population genetics of biting midges and a potential tool for species identification of Culicoides sonorensis Wirth & Jones.

BACKGROUND: Proper vector surveillance relies on the ability to identify species of interest accurately and efficiently, though this can be difficult in groups containing cryptic species. Culicoides Latreille is a genus of small biting flies responsible for the transmission of numerous pathogens to a multitude of vertebrates. Regarding pathogen transmission, the C. variipennis species complex is of particular interest in North America. Of the six species within this group, only C. sonorensis Wirth & Jones is a proven vector of bluetongue virus and epizootic hemorrhagic disease virus. Unfortunately, subtle morphological differences, cryptic species, and mitonuclear discordance make species identification in the C. variipennis complex challenging. Recently, single-nucleotide polymorphism (SNP) analysis enabled discrimination between the species of this group; however, this demanding approach is not practical for vector surveillance. METHODS: The aim of the current study was to develop a reliable and affordable way of distinguishing between the species within the C. variipennis complex, especially C. sonorensis. Twenty-five putative microsatellite markers were identified using the C. sonorensis genome and tested for amplification within five species of the C. variipennis complex. Machine learning was then used to determine which markers best explain the genetic differentiation between species. This led to the development of a subset of four and seven markers, which were also tested for species differentiation. RESULTS: A total of 21 microsatellite markers were successfully amplified in the species tested. Clustering analyses of all of these markers recovered the same species-level identification as the previous SNP data. Additionally, the subset of seven markers was equally capable of accurately distinguishing between the members of the C. variipennis complex as the 21 microsatellite markers. Finally, one microsatellite marker (C508) was found to be species-specific, only amplifying in the vector species C. sonorensis among the samples tested. CONCLUSIONS: These microsatellites provide an affordable way to distinguish between the sibling species of the C. variipennis complex and could lead to a better understanding of the species dynamics within this group. Additionally, after further testing, marker C508 may allow for the identification of C. sonorensis with a single-tube assay, potentially providing a powerful new tool for vector surveillance in North America.

Assessing colony elimination in multicolonial ants: Estimating field efficacy of insecticidal baits against the invasive dark rover ant (Brachymyrmex patagonicus).

BACKGROUND: A frequent goal of pest management strategies targeting social insects is total colony elimination. Insecticidal baits are highly effective at controlling social insect pests, although their ability to provide total colony elimination has only been well studied in a few species. Genetically testing colony elimination in many urban pest ants can be challenging due to indistinct colony boundaries observed in unicolonial, invasive species; however, some pest ants, such as the dark rover ant (Brachymyrmex patagonicus), maintain strict colony borders through aggression towards non-nestmates. Each of these distinct colonies can be identified using molecular markers, allowing for the tracking of individual colonies pre- and post-treatment to measure colony density. While counting the number of foraging workers to assess treatment efficacy may suffice in some cases, it offers little insight into the colony-level impacts of a treatment. RESULTS: Using microsatellite markers, distinct rover ant colonies were identified and tracked around residential structures before and after the application of an imidacloprid bait. The number of foraging ants at the treated structures was reduced by an average of 83.0% over a 28-day observation period. Baiting also significantly reduced the total number of colonies present. At the treatment structures, only ~25% of the original colonies remained at the end of the study. Colonies with foraging trails <1.5 m from a bait station had a higher chance of being eliminated. CONCLUSION: Using insecticidal baits against B. patagonicus can be highly effective at colony elimination; however, with such small foraging ranges and high colony densities, proper placement is required to ensure enough bait is properly positioned to treat all colonies affecting a structure. © 2022 Society of Chemical Industry.

Species delimitation and mitonuclear discordance within a species complex of biting midges.

The inability to distinguish between species can be a serious problem in groups responsible for pathogen transmission. Culicoides biting midges transmit many pathogenic agents infecting wildlife and livestock. In North America, the C. variipennis species complex contains three currently recognized species, only one of which is a known vector, but limited species-specific characters have hindered vector surveillance. Here, genomic data were used to investigate population structure and genetic differentiation within this species complex. Single nucleotide polymorphism data were generated for 206 individuals originating from 17 locations throughout the United States and Canada. Clustering analyses suggest the occurrence of two additional cryptic species within this complex. All five species were significantly differentiated in both sympatry and allopatry. Evidence of hybridization was detected in three different species pairings indicating incomplete reproductive isolation. Additionally, COI sequences were used to identify the hybrid parentage of these individuals, which illuminated discordance between the divergence of the mitochondrial and nuclear datasets.

Extensive human-mediated jump dispersal within and across the native and introduced ranges of the invasive termite Reticulitermes flavipes.

As native ranges are often geographically structured, invasive species originating from a single source population only carry a fraction of the genetic diversity present in their native range. The invasion process is thus often associated with a drastic loss of genetic diversity resulting from a founder event. However, the fraction of diversity brought to the invasive range may vary under different invasion histories, increasing with the size of the propagule, the number of reintroduction events, and/or the total genetic diversity represented by the various source populations in a multiple-introduction scenario. In this study, we generated a SNP data set for the invasive termite Reticulitermes flavipes from 23 native populations in the eastern United States and six introduced populations throughout the world. Using population genetic analyses and approximate Bayesian computation random forest, we investigated its worldwide invasion history. We found a complex invasion pathway with multiple events out of the native range and bridgehead introductions from the introduced population in France. Our data suggest that extensive long-distance jump dispersal appears common in both the native and introduced ranges of this species, probably through human transportation. Overall, our results show that similar to multiple introduction events into the invasive range, admixture in the native range prior to invasion can potentially favour invasion success by increasing the genetic diversity that is later transferred to the introduced range.

Divide and conquer: Multicolonial structure, nestmate recognition, and antagonistic behaviors in dense populations of the invasive ant Brachymyrmex patagonicus.

The ecological success of ants has made them abundant in most environments, yet inter- and intraspecific competition usually limit nest density for a given population. Most invasive ant populations circumvent this limitation through a supercolonial structure, eliminating intraspecific competition through a loss of nestmate recognition and lack of aggression toward non-nestmates. Native to South America, Brachymyrmex patagonicus has recently invaded many locations worldwide, with invasive populations described as extremely large and dense. Yet, in contrast with most invasive ants, this species exhibits a multicolonial structure, whereby each colony occupies a single nest. Here, we investigated the interplay between genetic diversity, chemical recognition, and aggressive behaviors in an invasive population of B. patagonicus. We found that, in its invasive range, this species reaches a high nest density with individual colonies located every 2.5 m and that colony boundaries are maintained through aggression toward non-nestmates. This recognition and antagonism toward non-nestmates is mediated by chemical differentiation between colonies, as different colonies exhibit distinct chemical profiles. We highlighted that the level of aggression between colonies is correlated with their degree of genetic difference, but not their overall chemical differentiation. This may suggest that only a few chemical compounds influence nestmate recognition in this species or that weak chemical differences are sufficient to elicit aggression. Overall, this study demonstrates that invasive ant populations can reach high densities despite a multicolonial structure with strong aggression between colonies, raising questions about the factors underlying their ecological success and mitigating negative consequences of competitive interactions.

Area-Wide Elimination of Subterranean Termite Colonies Using a Novaluron Bait.

We investigated the use of termite baiting, a proven system of targeted colony elimination, in an overall area-wide control strategy against subterranean termites. At two field sites, we used microsatellite markers to estimate the total number of Reticulitermes colonies, their spatial partitioning, and breeding structure. Termite pressure was recorded for two years before and after the introduction of Trelona® (active ingredient novaluron) to a large area of one of the sites. Roughly 70% of the colonies in the treatment site that were present at the time of baiting were not found in the site within two months after the introduction of novaluron. Feeding activity of the remaining colonies subsequently ceased over time and new invading colonies were unable to establish within this site. Our study provides novel field data on the efficacy of novaluron in colony elimination of Reticulitermes flavipes, as well as evidence that an area-wide baiting program is feasible to maintain a termite-free area within its native range.

Next-generation tools to control biting midge populations and reduce pathogen transmission.

Biting midges of the genus Culicoides transmit disease-causing agents resulting in a significant economic impact on livestock industries in many parts of the world. Localized control efforts, such as removal of larval habitat or pesticide application, can be logistically difficult, expensive and ineffective if not instituted and maintained properly. With these limitations, a population-level approach to the management of Culicoides midges should be investigated as a means to replace or supplement existing control strategies. Next-generation control methods such as Wolbachia- and genetic-based population suppression and replacement are being investigated in several vector species. Here we assess the feasibility and applicability of these approaches for use against biting midges. We also discuss the technical and logistical hurdles needing to be addressed for each method to be successful, as well as emphasize the importance of addressing community engagement and involving stakeholders in the investigation and development of these approaches.

Genetic Diversity of Culicoides stellifer (Diptera: Ceratopogonidae) in the Southeastern United States Compared With Sequences From Ontario, Canada.

Much of the bluetongue (BT) and epizootic hemorrhagic disease (EHD) research in North America focuses on white-tail deer and Culicoides sonorensis (Wirth & Jones) (Diptera: Ceratopogonidae), though several other biting midge species have been suggested as vectors. Culicoides stellifer (Coquillett) has been associated with hosts susceptible to hemorrhagic disease (HD), and more recently, specimens from Florida have tested positive for EHD and BT viral RNA. If C. stellifer is acting as a vector, this could have an impact on the distribution of HD in North America. To determine if gene flow is occurring across the range of C. stellifer within the southeast United States, a mitochondrial haplotype analysis was performed using the COI gene. Our haplotype network showed no population structure in C. stellifer from Florida, Texas, and South Carolina, as the overall genetic divergence between these sites was equal to the genetic divergence within each. We also compared these haplotypes to published sequences of C. stellifer collected in Ontario, Canada. Surprisingly, the genetic diversity of the flies from Ontario was two times greater than what was observed between the southeast U.S. collection sites. This considerable divergence could be evidence of a cryptic species. A better understanding of the connectivity between C. stellifer populations across all of North America will give insight into the distribution of HD. Our results show that gene flow is occurring between sites in the southeastern United States and potentially throughout the eastern distribution of the species.

Cryptic Wolbachia (Rickettsiales: Rickettsiaceae) Detection and Prevalence in Culicoides (Diptera: Ceratopogonidae) Midge Populations in the United States.

Culicoides midges vector numerous veterinary and human pathogens. Many of these diseases lack effective therapeutic treatments or vaccines to limit transmission. The only effective approach to limit disease transmission is vector control. However, current vector control for Culicoides midges is complicated by the biology of many Culicoides species and is not always effective at reducing midge populations and impacting disease transmission. The endosymbiont Wolbachia pipientis Hertig may offer an alternative control approach to limit disease transmission and affect Culicoides populations. Here the detection of Wolbachia infections in nine species of Culicoides midges is reported. Infections were detected at low densities using qPCR. Wolbachia infections were confirmed with the sequencing of a partial region of the 16S gene. Fluorescence in situ hybridization of Culicoides sonorensis Wirth and Jones adults and dissected ovaries confirm the presence of Wolbachia infections in an important vector of Bluetongue and Epizootic hemorrhagic disease viruses. The presence of Wolbachia in Culicoides populations in the United States suggests the need for further investigation of Wolbachia as a strategy to limit transmission of diseases vectored by Culicoides midges.

Culicoides species community composition and infection status with parasites in an urban environment of east central Texas, USA.

BACKGROUND: Despite their importance as vectors of zoonotic parasites that can impact human and animal health, Culicoides species distribution across different habitat types is largely unknown. Here we document the community composition of Culicoides found in an urban environment including developed and natural sites in east central Texas, a region of high vector diversity due to subtropical climates, and report their infection status with haemoparasites. RESULTS: A total of 251 individual Culicoides were collected from May to June 2016 representing ten Culicoides species, dominated by C. neopulicaris followed by C. crepuscularis. We deposited 63 sequences to GenBank among which 25 were the first deposition representative for six Culicoides species: C. arboricola (n = 1); C. nanus (n = 4); C. debilipalpis (n = 2); C. haematopotus (n = 14); C. edeni (n = 3); and C. hinmani (n = 1). We also record for the first time the presence of C. edeni in Texas, a species previously known to occur in the Bahamas, Florida and South Carolina. The urban environments with natural area (sites 2 and 4) had higher species richness than sites more densely populated or in a parking lot (sites 1 and 3) although a rarefaction analysis suggested at least two of these sites were not sampled sufficiently to characterize species richness. We detected a single C. crepuscularis positive for Onchocercidae gen. sp. DNA and another individual of the same species positive for Haemoproteus sacharovi DNA, yielding a 2.08% prevalence (n = 251) for both parasites in this species. CONCLUSIONS: We extend the knowledge of the Culicoides spp. community in an urban environment of Texas, USA, and contribute to novel sequence data for these species. Additionally, the presence of parasite DNA (Onchocercidae gen. sp. and H. sacharovi) from C. crepuscularis suggests the potential for this species to be a vector of these parasites.

Pupae of the Nearctic species of Culicoides Latreille subgenus Monoculicoides Khalaf (Diptera: Ceratopogonidae).

There are 160 valid species of Culicoides Latreille described from the Nearctic Region, but many are unknown as immatures or, although partially described, cannot be readily identified. We provide pupal diagnoses, descriptions, and a key to all seven known species of Culicoides subgenus Monoculicoides Khalaf occurring in the Nearctic biogeographic region. A diagnosis of several characters unique to this subgenus is provided to allow for the recognition of the included species from those of other subgeneric groupings. Microphotography of important morphological characters for both the key and descriptions are provided. This study highlights the usefulness of examining the pupae of Culicoides as a tool for species identification. The pupae of Culicoides grandensis Grogan Phillips, C. occidentalis Wirth Jones, and C. shemanchuki Grogan Lysyk are newly described and those of C. riethi Kieffer, C. stigma (Meigen), and C. variipennis Wirth Jones are redescribed in detail. The seventh species, C. sonorensis, was fully described recently.