RÉSUMÉ
Anthocyanidins and anthocyanins are one subclass of flavonoids in plants with diverse biological functions and have health-promoting effects. Dihydroflavonol 4-reductase (DFR) is one of the important enzymes involved in the biosynthesis of anthocyanidins and other flavonoids. Here, a new MOF-based nano-immobilized DFR enzyme acting as a nano-biocatalyst for the production of anthocyanidins in vitro was designed. We prepared UiO-66-NH2 MOF nano-carrier and recombinant DFR enzyme from genetic engineering. DFR@UiO-66-NH2 nano-immobilized enzyme was constructed based on covalent bonding under the optimum immobilization conditions of the enzyme/carrier ratio of 250 mg/g, 37 °C, pH 6.5 and fixation time of 10 min. DFR@UiO-66-NH2 was characterized and its catalytic function for the synthesis of anthocyanidins in vitro was testified using UPLC-QQQ-MS analysis. Compared with free DFR enzyme, the enzymatic reaction catalyzed by DFR@UiO-66-NH2 was more easily for manipulation in a wide range of reaction temperatures and pH values. DFR@UiO-66-NH2 had better thermal stability, enhanced adaptability, longer-term storage, outstanding tolerances to the influences of several organic reagents and Zn2+, Cu2+ and Fe2+ ions, and relatively good reusability. This work developed a new MOF-based nano-immobilized biocatalyst that had a good prospect of application in the green synthesis of anthocyanins in the future.
RÉSUMÉ
This project aimed to explore the influence of the interaction between ovotransferrin fibrils (OTF) and gum arabic (GA) on the formation mechanism, physicochemical properties, and curcumin delivery of the oleogel-in-water Pickering emulsion. Cryo-scanning electron microscopy results showed that OTF-GA complexes effectively adsorbed on the oil-water interface, generating spatial hindrance to inhibit droplet coalescence. The texture analysis also proved that OTF-GA complexes endowed oleogel-in-water Pickering emulsion with preferable springiness (0.49 ± 0.03 mm), chewiness (0.43 ± 0.07 mJ), and adhesion (0.31 ± 0.01 mJ). By exploring the coalescence stability, droplet size, and rheological properties of OTF-GA complexes-stabilized oleogel-in-water Pickering emulsion (OGPE), the higher coagulation stability, larger average droplet size (46.22 ± 0.08 µm), and stronger gel strength were observed. The microrheological results also exhibited stronger attraction between the OGPE droplets, a more pronounced solid-like structure, and a slower speed of movement than OTF-stabilized oleogel-in-water Pickering emulsion (OPE). Meanwhile, OGPE significantly enhanced the extent of lipolysis, stability, and bioaccessibility of curcumin, suggesting that it possessed superior performance as a delivery system for bioactive substances. This project provided adequate theoretical references for protein-polysaccharide complexes-stabilized oleogel-in-water Pickering emulsion, and contributed to expanding the application of oleogel-in-water Pickering emulsion in the food industry.
RÉSUMÉ
In order to overcome the problem that traditional W1/O/W2 double emulsions do not have targeted release performance, thereby better meeting the health needs of consumers, ovalbumin fibrils/pectin-based bilayer-stabilized double emulsion (OP-BDE) co-encapsulated with Lactobacillus plantarum and curcumin was constructed with pectin as the outer protective shell, which was expected to be used in the development of novel functional foods. The effects of pectin coating on the viability of Lactobacillus plantarum under conditions including storage, pasteurization, freeze-thaw cycles and in vitro simulated digestion were investigated. Results showed that pectin as protective shell could significantly enhance the tolerance of Lactobacillus plantarum to various environmental factors. Besides, the adsorption of pectin endowed OP-BDE with higher lipolysis and stronger protective effect on curcumin, remarkably improving the photostability and bioaccessibility of curcumin. In addition, in vitro simulated gastrointestinal release study indicated that OP-BDE possessed programmed sequential release property, allowing curcumin and Lactobacillus plantarum to be released in small intestine and colon, respectively. OP-BDE is the first reported co-delivery emulsion system with programmed release characteristic. This study provides new insights into OP-BDE in constructing co-delivery systems and programmed sequential release of active substances, and has potential reference and application value in actual food production.
Sujet(s)
Curcumine , Lactobacillus plantarum , Émulsions , Curcumine/pharmacologie , Pectine , Tube digestifRÉSUMÉ
Polysaccharides, the major active ingredient and quality control indicator of Polygomatum cyrtonema are in need of elucidation for its in vitro fermentation characteristics. This study aimed to investigate the structural characteristics of the homogeneous Polygomatum cyrtonema polysaccharide (PCP-80 %) and its effects on human intestinal bacteria and short chain fatty acids (SCFAs) production during the in vitro fermentation. The results revealed that PCP-80 % was yielded in 10.44 % and the molecular weight was identified to be 4.1 kDa. PCP-80 % exhibited a smooth, porous, irregular sheet structure and provided good thermal stability. The analysis of Gas chromatograph-mass spectrometer (GC-MS) suggested that PCP-80 % contained six glycosidic bonds, with 2,1-linked-Fruf residues accounted for a largest proportion. Nuclear magnetic resonance (NMR) provided additional evidence that the partial structure of PCP-80 % probably consists of â1)-ß-D-Fruf-(2 â as the main chain, accompanied by side chains dominated by â6)-ß-D-Fruf-(2â. Besides, PCP-80 % promoted the production of SCFAs and increased the relative abundance of beneficial bacteria such as Megamonas, Bifidobacterium and Phascolarctobacterium during in vitro colonic fermentation, which changed the composition of the intestinal microbiota. These findings indicated that Polygomatum cyrtonema polysaccharides were able to modulate the structure and composition of the intestinal bacteria flora and had potential probiotic properties.
Sujet(s)
Microbiome gastro-intestinal , Polygonatum , Humains , Polygonatum/composition chimique , Fermentation , Polyosides/composition chimique , Bactéries , Acides gras volatilsRÉSUMÉ
The purpose of this work was to investigate the release characteristic of bound polyphenols (BP) from tea residues insoluble dietary fiber (IDF) by mixed solid-state fermentation (SSF) with cellulose degrading strains CZ-6 and CZ-7. The results implied that cellulase, ß-glucosidase and filter paper lyase activities were strongly correlated with the BP content. The scanning electron microscop and fourier transform infrared spectroscopy manifested that the cellulose network of the IDF was decomposed and dissolve, forming more loose fibrous structure. Additionally, 28 polyphenols components were detected and their biotransformation pathways were preliminary speculated. Moreover, the BP obtained by mixed SSF produced prominent inhibitory activities against α-glucosidase and α-amylase, as well as exhibited significant scavenging effects on DPPHâ¢, ABTS+⢠free radicals and ferric reducing antioxidant power. These findings could further promote the utilization of BP from agricultural by-products in a more natural and economical method, CZ-6 and CZ-7 strains provide a new approach to expound the release and conversion of BP.
Sujet(s)
Cellulose , Polyphénols , Cellulose/composition chimique , Fermentation , Fibre alimentaire/analyse , ThéRÉSUMÉ
The effects of enzyme hydrolysis treatment, Aspergillus niger fermentation treatment, Trichoderma reesei fermentation treatment, Aspergillus niger-enzyme hydrolysis treatment and Trichoderma reesei-enzyme hydrolysis treatment on structural properties and adsorption capacities of soluble dietary fiber from Mesona chinensis Benth residues were evaluated and compared. The Aspergillus niger-enzyme hydrolysis treatment sample possessed more diverse structure, lower crystallinity and thermal stability than other modified samples. Meanwhile, it also observed the highest soluble dietary fiber yield (20.76 ± 0.31 %), water-holding capacity and glucose adsorption capacity (38.03 ± 0.28 mg/g). The Aspergillus niger fermentation treatment sample generated a high oil-holding capacity, nitrite ion adsorption capacity (181.84 ± 6.67 ug/g), cholesterol adsorption capacity (16.40 ± 0.37 mg/g) and sodium cholate adsorption capacity (94.80 ± 1.41 mg/g). Additionally, different monosaccharide composition was exhibited due to diverse extraction methods. Our finding revealed that these two modification methods could effectively enhance the economic value of Mesona chinensis Benth residues.
Sujet(s)
Cellulase , Trichoderma , Aspergillus niger , Cellulase/composition chimique , Adsorption , Fibre alimentaire , HydrolyseRÉSUMÉ
Appropriate modification methods can increase the proportion of soluble dietary fiber (SDF). In this study, grapefruit peel insoluble dietary fiber (GP-IDF) was modified with the combined microwave and enzymatic method to obtain SDF. With regard to structural characterization, SDF from grapefruit peel IDF (GP-IDF-SDF) presented as a flat sheet with cracks, composed of a typical cellulose type I crystal, and had good stability below 200 °C. Galacturonic acid, arabinose and glucuronic acid were the main monosaccharide compositions, indicating that pectin might have been the principal component. Moreover, GP-IDF-SDF was excellent in water retention capacity (13.43 ± 1.19 g/g), oil retention capacity (22.10 ± 0.85 g/g) and glucose adsorption capacity (14.49 ± 0.068 mg/g). Thereafter, the effects of GP-IDF-SDF and commercial pectin addition on the color, rheology, texture and sensory properties of blueberry jam were compared. The results showed that the color of jam with GP-IDF-SDF was lighter. The addition of GP-IDF-SDF had less effects on the viscosity and gel strength of jam, but it enhanced the stability of jam. According to sensory data, the color, texture and spreadability of jam with GP-IDF-SDF or pectin were improved and more acceptable. Overall, GP-IDF-SDF had functional characteristics and played a positive role in jam, and it is expected to be a candidate for the development of functional food ingredients.
RÉSUMÉ
In our study, two high efficiency cellulose degrading strains were screened, isolated and identified as Cochliobolus kusanoi and Aspergillus puulaauensis by 18S rDNA gene sequencing. In addition, the composite microbial system was constructed to develop the synergistic effect among different strains. Under the optimum conditions, the yield of soluble dietary fiber from tea residues by mixed fermentation method (MF-SDF) dramatically increased compared to single strain fermentation. The structural analysis demonstrated that all samples possessed the representative infrared absorption peaks of polysaccharides, whereas MF-SDF revealed more loose structure, lower crystallinity and smaller molecular size. For the adsorption capacities indexes, MF-SDF also owned the highest adsorbing capacity for the water molecule, oil molecule, cholesterol molecule and nitrite ion. Overall, our data showed that mixed fermentation method could be better choices to improve the functional properties of dietary fiber, and screening of cellulose degrading strains could provide new thinkings for the study of dietary fiber modification and realize high-quality utilization of crop residues.
Sujet(s)
Cellulose , Nitrites , Adsorption , Glucides , Cholestérol/composition chimique , ADN ribosomique , Fibre alimentaire/analyse , Polyosides , Thé , EauRÉSUMÉ
Alkaline hydrogen peroxide (AHP), high-temperature cooking combined with ultrasonic (HTCU) and high-temperature cooking combined with complex enzyme hydrolysis (HTCE) were used to modify soluble dietary fiber (SDF) in Mesona chinensis Benth. residue (MCBR), then the structural and in vitro functional properties of A-SDF, HU-SDF and HE-SDF were investigated. Results showed that the three treatments significantly increased the yield of SDF. Scanning electron microscopy, FT-IR, monosaccharide composition, X-ray diffraction, molecular weight distribution and thermal stability analysis were employed to determine the structural changes. Compared with the control SDF (CK-SDF), HE-SDF and HU-SDF had looser and more porous microstructure, as well as lower crystallinity. In contrast to HE-SDF and HU-SDF, A-SDF exhibited a dense wavy microstructure, and elevated crystallinity and thermal stability. In addition, the monosaccharide composition and molecular weight of HU-SDF, HE-SDF and A-SDF were significantly altered as compared to CK-SDF. Moreover, the functional properties of HE-SDF and HU-SDF, including water holding capacity (WHC), oil holding capacity (OHC), glucose adsorption capacity (GAC), α-amylase activity inhibition ratio (α-AAIR), cholesterol adsorption capacity (CAC) and nitrite ion adsorption capacity (NIAC), were significantly higher than those of CK-SDF. However, the dense structure and high crystallinity of A-SDF resulted in a significantly lower GAC and NIAC than that of CK-SDF, with only WHC and α-AAIR being improved. Overall, this study showed that HTCU and HTCE could be used as ideal modification methods for MCBR SDF, HE-SDF and HU-SDF have potential as functional additives in food.
Sujet(s)
Fibre alimentaire , Lamiaceae , Fibre alimentaire/analyse , Glucose , Masse moléculaire , Oses/analyse , Spectroscopie infrarouge à transformée de Fourier , Eau/composition chimiqueRÉSUMÉ
Polyimide (PI) aerogels have attracted great attention owing to their low density and excellent thermal stability. However, hydrophobic surface modification is required for PI aerogels to improve their ability in oil/water separation due to their amphiphilic characteristic. Two-dimensional MXenes (transition metal carbides/nitrides) can be utilized as nanofillers to enhance the properties of polymers because of their unique layered structure and versatile interface chemistry. Herein, the robust, lightweight, and hydrophobic PI/MXene three-dimensional architectures were fabricated via freeze-drying of polyamide acid/MXene suspensions and thermal imidization. Polyamide acid was synthesized using N-N-dimethylacetamide and 4,4'-oxydianiline. MXene (Ti3C2Tx) dispersion was obtained via the etching of Ti3AlC2 and ultrasonic exfoliation. Taking advantage of the strong interaction between PI chains and MXene nanosheets, the interconnected, highly porous, and hydrophobic PI/MXene aerogels with low density were fabricated, resulting in the improved compressive performance, remarkable oil absorption capacity, and efficient separation of oil and water. For the PI/MXene-3 aerogel (weight ratio, 5.2:1) without any surface modification, the water contact angle was 119° with a density of 23 mg/cm3. This aerogel can completely recover to its original height after 50 compression-release cycles, exhibiting superelasticity and exceptional fatigue-resistant ability. It also showed high absorption capacities to various organic liquids ranging from approximately 18 to 58 times of their own weight. This hybrid aerogel can rapidly separate the chloroform, soybean oil, and liquid paraffin from the water-oil system. The thermally stable hybrid aerogel also exhibited excellent fire safety properties and outstanding reusability under an extreme environment.
RÉSUMÉ
Fabricating high-performance MXene-based polymer nanocomposites is a huge challenge because of the poor dispersion and interfacial interaction of MXene nanosheets in the polymer matrix. To address the issue, MXene nanosheets were successfully exfoliated and subsequently modified by long-chain cationic agents with different chain lengths, i.e., decyltrimethylammonium bromide (DTAB), octadecyltrimethylammonium bromide (OTAB), and dihexadecyldimethylammonium bromide (DDAB). With the long-chain groups on their surface, modified Ti3C2 (MXene) nanosheets were well dispersed in N,N-dimethylformamide (DMF), resulting in the formation of uniform dispersion and strong interfacial adhesion within a polystyrene (PS) matrix. The thermal stability properties of cationic modified Ti3C2/PS nanocomposites were improved considerably with the temperatures at 5% weight loss increasing by 20 °C for DTAB-Ti3C2/PS, 25 °C for OTAB-Ti3C2/PS and 23 °C for DDAB-Ti3C2/PS, respectively. The modified MXene nanosheets also enhanced the flame-retardant properties of PS. Compared to neat PS, the peak heat release rate (PHRR) was reduced by approximately 26.4%, 21.5% and 20.8% for PS/OTAB-Ti3C2, PS/DDAB-Ti3C2 and PS/DTAB-Ti3C2, respectively. Significant reductions in CO and CO2 productions were also obtained in the cone calorimeter test and generally lower pyrolysis volatile products were recorded by PS/OTAB-Ti3C2 compared to pristine PS. These property enhancements of PS nanocomposites are attributed to the superior dispersion, catalytic and barrier effects of Ti3C2 nanosheets.
RÉSUMÉ
A novel three-dimensional (3D) epoxy/graphene nanosheet/hydroxylated boron nitride (EP/GNS/BNOH) hybrid aerogel was successfully fabricated in this study. This was uniquely achieved by constructing a well-defined and interconnected 3D network architecture. The manufacturing process of EP/GNS/BNOH involved a simple one-pot hydrothermal strategy, followed by the treatment of freeze-drying and high-temperature curing. In comparison with EP/GNS-3, EP/GNS/BNOH-3 demonstrated improvement of 97% for compressive strength at 70% strain. Through compression tests, fracture occurred for EP/GNS-3 at ninth compression cycles, whereas EP/GNS/BNOH-3 retained its original form after twenty compression cycles, with a residual height of 97% (i.e., only 3% reduction). By the addition of BNOH in the polymer matrix, the dynamic heat transfer and dissipation rates of EP/GNS/BNOH aerogels were also considerably reduced, indicating that the aerogel with BNOH additive possessed excellent thermal insulation properties. Thermogravimetric analysis results revealed that the thermal stabilities of EP/GNS and EP/GNS/BNOH aerogels were improved with increasing loading of EP, and EP/GNS/BNOH aerogels exhibited a better thermal stability at high temperatures. Through the elevated levels attained in the compressive strength, superelasticity, and thermal resistance, EP/GNS/BNOH aerogels has the great potential of being a very effective thermal insulation material to be utilized across a board range of applications in building, automotive, spacecraft, and mechanical systems.
RÉSUMÉ
High-performance poly(1,4-butylene terephthalate) (PBT) nanocomposites have been developed via the consideration of phosphorus-containing agents and amino-carbon nanotube (A-CNT). One-pot functionalization method has been adopted to prepare functionalized CNTs via the reaction between A-CNT and different oxidation state phosphorus-containing agents, including chlorodiphenylphosphine (DPP-Cl), diphenylphosphinic chloride (DPP(O)-Cl), and diphenyl phosphoryl chloride (DPP(O3)-Cl). These functionalized CNTs, DPP(Ox)-A-CNTs (x = 0, 1, 3), were, respectively, mixed with PBT to obtain the CNT-based polymer nanocomposites through a melt blending method. Scanning electron microscope observations demonstrated that DPP(Ox)-A-CNT nanoadditives were homogeneously distributed within PBT matrix compared to A-CNT. The incorporation of DPP(Ox)-A-CNT improved the thermal stability of PBT. Moreover, PBT/DPP(O3)-A-CNT showed the highest crystallization temperature and tensile strength, due to the superior dispersion and interfacial interactions between DPP(O3)-A-CNT and PBT. PBT/DPP(O)-A-CNT exhibited the best flame retardancy resulting from the excellent carbonization effect. The radicals generated from decomposed polymer were effectively trapped by DPP(O)-A-CNT, leading to the reduction of heat release rate, smoke production rate, carbon dioxide and carbon monoxide release during cone calorimeter tests.
RÉSUMÉ
The mechanism of the sulfur cathode in Li-S batteries has been proposed. It was revealed by the real-time quantitative determination of polysulfide species and elemental sulfur by means of high-performance liquid chromatography in the course of the discharge and recharge of a Li-S battery. A three-step reduction mechanism including two chemical equilibrium reactions was proposed for the sulfur cathode discharge. The typical two-plateau discharge curve for the sulfur cathode can be explained. A two-step oxidation mechanism for Li2S and Li2S2 with a single chemical equilibrium among soluble polysulfide ions was proposed. The chemical equilibrium among S52-, S62-, S72-, and S82- throughout the entire oxidation process resulted for a single flat recharge curve in Li-S batteries.
RÉSUMÉ
Aminated multiwalled carbon nanotubes (A-MWCNT) were reacted with diphenylphosphinic chloride (DPP-Cl) to prepare the functionalized MWCNT (DPPA-MWCNT). A-MWCNT and DPPA-MWCNT were respectively mixed with polystyrene (PS) to obtain composites through the melt compounding method. SEM observations demonstrated that the DPPA-MWCNT nanofillers were more uniformly distributed within the PS matrix than A-MWCNT. PS/DPPA-MWCNT showed improved thermal stability, glass transition temperature, and tensile strength in comparison with PS/A-MWCNT, resulting from good dispersion and interfacial interactions between DPPA-MWCNT and PS matrix. The incorporation of DPPA-MWCNT to PS significantly reduced peak heat release rate, smoke production rate, and carbon monoxide and carbon dioxide release in cone calorimeter tests. The enhanced fire-retardant properties should be ascribed to the barrier effect of carbon nanotubes, which could provide enough time for DPPA-MWCNT and its functionalized groups to trap the degrading polymer radicals to catalyze char formation. The char layer served as an efficient insulating barrier to reduce the exposure of polymer matrix to an external heat source as well as retarding the flammable gases from feeding the flame.