RÉSUMÉ
Hydrocotyle pseudoconferta was an important medicinal plant. The complete plastid genome of this species was reported for the first time. The full length of the complete chloroplast genome is 153,302 bp, with a typical quadripartite organization: a large single-copy (LSC) region of 84,417 bp, a small single-copy (SSC) region of 18,767 bp, and a pair inverted repeat regions (IRa and IRb) with 25,059 bp for each. The complete chloroplast genome of H. pseudoconferta encoded 133 genes, comprising 86 protein-coding genes, 37 tRNA genes, 8 rRNA genes, and 2 pseudogenes. The phylogenetic analysis suggested the closest relationship between H. pseudoconferta and Hydrocotyle nepalensis.
RÉSUMÉ
Roundworm parasite infections are a major cause of human and livestock disease worldwide and a threat to global food security. Disease control currently relies on anthelmintic drugs to which roundworms are becoming increasingly resistant. An alternative approach is control by vaccination and 'hidden antigens', components of the worm gut not encountered by the infected host, have been exploited to produce Barbervax, the first commercial vaccine for a gut dwelling nematode of any host. Here we present the structure of H-gal-GP, a hidden antigen from Haemonchus contortus, the Barber's Pole worm, and a major component of Barbervax. We demonstrate its novel architecture, subunit composition and topology, flexibility and heterogeneity using cryo-electron microscopy, mass spectrometry, and modelling. Importantly, we demonstrate that complexes with the same architecture are present in other Strongylid roundworm parasites including human hookworm. This suggests a common ancestry and the potential for development of a unified hidden antigen vaccine.
Sujet(s)
Endopeptidases/métabolisme , Endopeptidases/ultrastructure , Haemonchus/immunologie , Protéines d'helminthes/métabolisme , Protéines d'helminthes/ultrastructure , Glycoprotéines membranaires/métabolisme , Glycoprotéines membranaires/ultrastructure , Animaux , Anthelminthiques/pharmacologie , Anticorps antihelminthe , Antigènes d'helminthe/immunologie , Cryomicroscopie électronique , Endopeptidases/immunologie , Haemonchus/pathogénicité , Protéines d'helminthes/immunologie , Glycoprotéines membranaires/immunologie , Parasites , Vaccination , Vaccins/immunologieRÉSUMÉ
The quality of bitumen directly affects road performance and road life. Traditional analytical methods-for wax content, softening point and penetration of bitumen are tedious and time-consuming. A new fast method, with which the three properties can be determined at same time, is proposed in this paper. The spectra of 220 bitumen were collected and their wax content, softening point and penetration data were determined according to the standard JTJ052-2000. The quantitative calibration models for wax content, softening point and penetration were established using partial least squares (PLS), with SECV 0.13, 0.88, 3.18 and SEP 0.14, 1.06, 3.90, less than the reproducibility error stipulated in the standard method. Three samples were in random selected to test the repeatability, the results met the precision requirement of the standard method. With its advantages of better repeatability, fast, easy operation, the new method can be used as an alternative for the determination of wax content, softening point and penetration of bitumen.
RÉSUMÉ
A new method using reflection NIR technology was developed to determine the alcoholysis degree and volatile matter of Poly-vinyl alcohol (PVA). 120 samples were used in this research. NIR spectra of the sample were scanned by the spectrometer from 1 000 to 1 800 nm. The alcoholysis degree and volatile matter were determined by the national standard method of volumetric and gravimetric method respectivily. Partial least squares (PLS1) was used to establish the quantitative correction model of alcoholysis degree and volatile matter of PVA. The corrected relationship (Rc) of alcoholysis degree and volatile matter was 0.976 and 0.981 respectively. The corrected standard deviation(SEC) was 0.176 and 0.197. The predicted relationship (R(p)) was 0.967 and 0.969. The predicted deviation(SEP) was 0.202 and 0.193. The test for actual samples showed that the NIR method was fitted for the requirement of PVA analysis.
RÉSUMÉ
A new analytical method of analyzing dimethyl ether (DME) content in liquefied petroleum gas (LPG) is proposed in this paper. An unsolved problem about quick detection of the composition of LPG has been settled with this method. A set of precise preparation apparatus for DME/ LPG solution and a set of quickly analytical system of LPG based on near infrared technology were designed. The analytical equipment can be conveniently connected to the sampling cylinder because it can bear 3.5 MPa pressure. Oblique projection algorithm was used to separate the pure spectra of DME from that of the LPG's solutions. The standard curve of the concentration of DME (c) has been built by using the Intensity (I) of pure signal of DME in the LPG solution and the concentrations. The correlation coefficient of the equation is 0.999 4. The result of external validation shows that the relative error is less than 2.0%. The new method has the advantages such as fast, easy and noneed of expensive multivariate modeling.
RÉSUMÉ
A rapid discrimination method of edible oils, KL-BP model, was proposed by attenuated total reflectance infrared spectroscopy. The model extracts the characteristic of classification from source data by KL and reduces data dimension at the same time. Then the neural network model is constructed by the new data which as the input of the model. 84 edible oil samples which include sesame oil, corn oil, canola oil, blend oil, sunflower oil, peanut oil, olive oil, soybean oil and tea seed oil, were collected and their infrared spectra determined using an ATR FT-IR spectrometer. In order to compare the method performance, principal component analysis (PCA) direct-classification model, KL direct-classification model, PLS-DA model, PCA-BP model and KL-BP model are constructed in this paper. The results show that the recognition rates of PCA, PCA-BP, KL, PLS-DA and KL-BP are 59.1%, 68.2%, 77.3%, 77.3% and 90.9% for discriminating the 9 kinds of edible oils, respectively. KL extracts the eigenvector which make the distance between different class and distance of every class ratio is the largest. So the method can get much more classify information than PCA. BP neural network can effectively enhance the classification ability and accuracy. Taking full of the advantages of KL in extracting more category information in dimension reducing and the features of BP neural network in self-learning, adaptive, nonlinear, the KL-BP method has the best classification ability and recognition accuracy and great importance for rapidly recognizing edible oil in practice.
Sujet(s)
Huiles végétales/analyse , Modèles théoriques , , Huiles végétales/classification , Analyse en composantes principales , Spectrophotométrie IRRÉSUMÉ
A new rapid quantitative method for the determination of oxygenates and the compounds not included in the national standard in gasoline using near-infrared spectroscopy is raised by this paper. This method combine near-infrared spectroscopy with oblique projection. This experiment choose four different types of gasoline, including reconcile gasoline, FCC refined gasoline, reformed gasoline and desulfurizing gasoline. Prepare series gasoline samples containing different concentrations and different types of compounds. Using FTIR spectrometer to measure those samples and got transmission spectrums. Oblique projection method could separate quantity spectral signal from mixed spectrum signal, and using projection to calculate and analyze the separated signal to obtain the content of measured component. The deviation between this method and the real content is low, the absolute error is less than 0.8 and the relative error is less than 8%. For the actual gasoline samples, compare results of this method with gas chromatography, the absolute error are less than 0.85 and the relative error are less than 6.85%. This method solves the problem of general multivariate calibration methods. It is very significant for the development of rapid detection technology using NIR suitable for on-site and the improvement of the quality of gasoline.
RÉSUMÉ
A new actinomycete strain NA4 was isolated from a deep-sea sediment collected from the South China Sea and showed promising antifungal activities against soilborne fungal pathogens. It was identified as Streptomyces cavourensis by morphological, physiological, and phylogenetic analyses based on its 16S rRNA gene sequence. The main antifungal components were isolated and identified from the fermentation culture as bafilomycins B1 and C1. These compounds exhibited significant antifungal activities and a broad antifungal spectrum. The results suggest that the Streptomyces cavourensis NA4 and bafilomycins B1 and C1 could be used as potential biocontrol agents for soilborne fungal diseases of plants.
Sujet(s)
Antifongiques/isolement et purification , Antifongiques/pharmacologie , Agents de lutte biologique/isolement et purification , Macrolides/isolement et purification , Streptomyces/composition chimique , Chine , Sédiments géologiques/microbiologie , Phylogenèse , Maladies des plantes/microbiologie , Maladies des plantes/prévention et contrôle , ARN ribosomique 16S/génétique , Streptomyces/isolement et purificationRÉSUMÉ
A new method of near-infrared (NIR) diffuse reflectance spectroscopy is proposed to rapidly determine the degree of polymerization (DP) of natural cellulose (cotton and wood) pulp produced by a new clean pulping process. One hundred and ninety five samples were collected and their DP data were determined by standard method GB/T 9107-1999. The spectroscopy measurement method of the samples was studied and their near-infrared diffuse reflectance spectra were collected. The quantitative DP calibration models of one mixed cotton & wood and two separate cotton and wood pulps were established by partial least squares (PLS). The optimum models were developed using the spectra pretreated by derivative, autoscaling and mean-centering, and their performance is as follows: correlation coefficient of 0.980, 0.993 and 0.886, and RMSEP of 147, 143 and 53, respectively. The accuracy of NIR method was also studied. The results show that the accuracy of the two separate models of cotton and wood is better than that of the mixed model, and the precision of the two separate models is better than that of GB/T9107-1999. The identification model of cotton and wood was also established using principal component analysis (PCA). The result shows that the spectra of cotton and wood pulp have obvious difference, and the model can identify successfully the two kinds of pulp. The result indicates that the new NIR method is feasible to realize the on-line analysis of polymerization degree of natural cellulose pulp with its advantage of rapidness and easy operation.
Sujet(s)
Cellulose/composition chimique , Spectroscopie proche infrarouge , Gossypium , Méthode des moindres carrés , Modèles théoriques , Analyse en composantes principales , BoisRÉSUMÉ
A set of rapid analysis system for hydrocarbon composition of heavy oils was designed using attenuated total reflection FTIR spectrometer and chemometrics to determine the hydrocarbon composition of furfural extract oils. Sixty two extract oil samples were collected and their saturates and aromatics content data were determined according to the standard NB/SH/T0509-2010, then the total contents of resins plus asphaltenes were calculated by the subtraction method in the percentage of weight. Based on the partial least squares (PLS), calibration models for saturates, aromatics, and resin+asphaltene contents were established using attenuated total reflection FTIR spectroscopy, with their SEC, 1.43%, 0.91% and 1.61%, SEP, 1.56%, 1.24% and 1.81%, respectively, meeting the accuracy and repeatability required for the standard. Compared to the present standard method, the efficiency of hydrocarbon composition analysis for furfural extract oils is significantly improved by the new method which is rapid and simple. The system could also be used for other heavy oil analysis, with excellent extension and application foreground.
Sujet(s)
Furfural/composition chimique , Hydrocarbures/analyse , Huiles végétales/composition chimique , Spectrophotométrie IR , Calibrage , Méthode des moindres carrés , Spectroscopie infrarouge à transformée de FourierRÉSUMÉ
The side effects in spectral multivariate modeling caused by the uneven distribution of sample numbers in the region of the calibration set and validation set were analyzed, and the "average" phenomenon that samples with small property values are predicted with larger values, and those with large property values are predicted with less values in spectral multivariate calibration is showed in this paper. Considering the distribution feature of spectral space and property space simultaneously, a new method of optimal sample selection named Rank-KS is proposed. Rank-KS aims at improving the uniformity of calibration set and validation set. Y-space was divided into some regions uniformly, samples of calibration set and validation set were extracted by Kennard-Stone (KS) and Random-Select (RS) algorithm respectively in every region, so the calibration set was distributed evenly and had a strong presentation. The proposed method were applied to the prediction of dimethylcarbonate (DMC) content in gasoline with infrared spectra and dimethylsulfoxide in its aqueous solution with near infrared spectra. The "average" phenomenon showed in the prediction of multiple linear regression (MLR) model of dimethylsulfoxide was weakened effectively by Rank-KS. For comparison, the MLR models and PLS1 models of MDC and dimethylsulfoxide were constructed by using RS, KS, Rank-Select, sample set partitioning based on joint X- and Y-blocks (SPXY) and proposed Rank-KS algorithms to select the calibration set, respectively. Application results verified that the best prediction was achieved by using Rank-KS. Especially, for the distribution of sample set with more in the middle and less on the boundaries, or none in the local, prediction of the model constructed by calibration set selected using Rank-KS can be improved obviously.
RÉSUMÉ
In the present paper, a new correction method of baseline drift of discrete spectrum is proposed by combination of cubic spline interpolation and first order derivative. A fitting spectrum is constructed by cubic spline interpolation, using the datum in discrete spectrum as interpolation nodes. The fitting spectrum is differentiable. First order derivative is applied to the fitting spectrum to calculate derivative spectrum. The spectral wavelengths which are the same as the original discrete spectrum were taken out from the derivative spectrum to constitute the first derivative spectra of the discrete spectra, thereby to correct the baseline drift of the discrete spectra. The effects of the new method were demonstrated by comparison of the performances of multivariate models built using original spectra, direct differential spectra and the spectra pretreated by the new method. The results show that negative effects on the performance of multivariate model caused by baseline drift of discrete spectra can be effectively eliminated by the new method.
RÉSUMÉ
A new method is proposed for the fast determination of the induction period of gasoline using Fourier transform attenuated total reflection infrared spectroscopy (ATR-FTIR). A dedicated analysis system with the function of spectral measurement, data processing, display and storage was designed and integrated using a Fourier transform infrared spectrometer module and chemometric software. The sample presentation accessory designed which has advantages of constant optical path, convenient sample injection and cleaning is composed of a nine times reflection attenuated total reflectance (ATR) crystal of zinc selenide (ZnSe) coated with a diamond film and a stainless steel lid with sealing device. The influence of spectral scanning number and repeated sample loading times on the spectral signal-to-noise ratio was studied. The optimum spectral scanning number is 15 times and the optimum sample loading number is 4 times. Sixty four different gasoline samples were collected from the Beijing-Tianjin area and the induction period values were determined as reference data by standard method GB/T 8018-87. The infrared spectra of these samples were collected in the operating condition mentioned above using the dedicated fast analysis system. Spectra were pretreated using mean centering and 1st derivative to reduce the influence of spectral noise and baseline shift A PLS calibration model for the induction period was established by correlating the known induction period values of the samples with their spectra. The correlation coefficient (R2), standard error of calibration (SEC) and standard error of prediction (SEP) of the model are 0.897, 68.3 and 91.9 minutes, respectively. The relative deviation of the model for gasoline induction period prediction is less than 5%, which meets the requirements of repeatability tolerance in GB method. The new method is simple and fast. It takes no more than 3 minutes to detect one sample. Therefore, the method is feasible for implementing fast determination of gasoline induction period, and of a positive meaning in the evaluation of fuel quality.
RÉSUMÉ
In the spectral analysis, a large-scale application of the traditional multivariate analysis methods has been limited by both high cost and poor applicability of the calibration models. A new multivariate analysis method was proposed for multicomponent systems in the present paper. Determining MTBE content in gasoline solution by infrared spectroscopy was studied. The spectra of five kinds of gasoline and their 50 narrow distillation fractions were used to build the background library. The oblique projection algorithm was applied to the spectra of MTBE gasoline solution samples to extract the purespectral signal of MTBE in the solution. A unary linear regression curve was built between the pure spectral signals of MTBE and their concentrations with a correlation coefficient of 0.995 2 and an intercept of 0.025. Compared with the orthogonal projection algorithm method and PLS model method, a large amounts of calibration samples and complex model are no longer needed by the new method which is simpler, more accurate and with better applicability.
RÉSUMÉ
The V-ATPase is a membrane-bound protein complex which pumps protons across the membrane to generate a large proton motive force through the coupling of an ATP-driven 3-stroke rotary motor (V1) to a multistroke proton pump (Vo). This is done with near 100% efficiency, which is achieved in part by flexibility within the central rotor axle and stator connections, allowing the system to flex to minimise the free energy loss of conformational changes during catalysis. We have used electron microscopy to reveal distinctive bending along the V-ATPase complex, leading to angular displacement of the V1 domain relative to the Vo domain to a maximum of ~30°. This has been complemented by elastic network normal mode analysis that shows both flexing and twisting with the compliance being located in the rotor axle, stator filaments, or both. This study provides direct evidence of flexibility within the V-ATPase and by implication in related rotary ATPases, a feature predicted to be important for regulation and their high energetic efficiencies.
Sujet(s)
Vacuolar Proton-Translocating ATPases/métabolisme , Animaux , Cryomicroscopie électronique , Manduca/enzymologie , Saccharomyces/enzymologie , Vacuolar Proton-Translocating ATPases/ultrastructureRÉSUMÉ
A new near infrared diffuse reflectance spectroscopy method is proposed to rapidly detect alpha-cellulose content of natural cellulose (plant fiber: cotton, wood) pulp in a new clean pulping process. One hundred forty two samples were collected and their alpha-cellulose content data were determined by standard method GB/T 9107-1999. The samples were homogenized by grinding pretreatment to improve spectroscopy measurement accuracy. Effective classification models were built by SIMCA, with the total correct identification. Using partial least squares (PLS) quantitative calibration, alpha-cellulose of the whole and separate cotton and wood pulp was established, with the correlation coefficients of 0.954, 0.911, 0.839, SEP, 0.024, 0.012 and 0.016, respectively. The repeatability results obtained by the new method are in agreement with the results from GB/T 9107-1999. The new method is feasible for determining alpha-cellulose content of natural cellulose (plant fiber: cotton, wood) in clean pulping process.
Sujet(s)
Cellulose/analyse , Cellulose/composition chimique , Spectroscopie proche infrarouge/méthodes , Calibrage , Cellulose/métabolisme , Gossypium/composition chimique , Méthode des moindres carrés , Bois/composition chimiqueRÉSUMÉ
A rapid nondestructive method for identifying intact foods containing trans fatty acids (TFA) using diffuse near infrared spectroscopy (NIR) was proposed in the present paper. The diffuse Fourier transform near infrared (FT-NIR) spectra of intact samples were collected by fiber probe, and the reference data of TFA content were determined by Chinese standard method GB/T 22110-2008 (gas chromatography (GC) method). In this work, all the samples were classified into two categories: foods with TFA and foods without TFA according to the TFA content of the foods. The identification models were established by different supervised pattern recognition algorithms including partial least square discriminant analysis (PLSDA), support vector machine (SVM), soft independent modeling of class analogy (SIMCA) and K-nearest neighbor method (KNN) etc. The performances of the established models employing different algorithms, data pretreatments and wavelength bands were compared. The results show that PLSDA and SVM algorithms have the ability of identifying intact foods with TFA, and the performance of identification models established by PLSDA is better than that of SVM. The PLSDA models established by the wavelength bands of 4 138-4 428, 5 507-5 963 and 7 794-8 960 cm(-1) which were pretreated with pretreatment methods of auto scaling and second derivative have the best performance. The correct classification percentages of its calibration and validation set are 96.4% and 88%, respectively, which indicates that this method is feasible for the identification of foods with TFA. This NIR method above mentioned has the characteristics of rapidness, non-destruction and easy operation due to the elimination of sample pretreatment such as oil extraction and grinding, therefore it is very suitable for on-line and in-site detection application.
Sujet(s)
Analyse d'aliment/méthodes , Spectroscopie proche infrarouge , Acides gras trans/analyse , Algorithmes , Calibrage , Chromatographie en phase gazeuse , Analyse de regroupements , Analyse discriminante , Méthode des moindres carrés , Modèles théoriques , Machine à vecteur de supportRÉSUMÉ
In the present paper, the distribution of sugar level within the mini-watermelon was studied, a new sugar characterization method of mini-watermelon using average sugar level, the highest sugar level and the lowest sugar level index is proposed. Feasibility of nondestructive determination of mini-watermenlon sugar level using diffuse reflectance spectroscopy information was investigated by an experiment. PLS models for measuring the 3 sugar levels were established. The results obtained by near infrared spectroscopy agreed with that of the new method established above.
Sujet(s)
Glucides/analyse , Citrullus/composition chimique , Spectroscopie proche infrarouge , Méthode des moindres carrés , Modèles théoriquesRÉSUMÉ
A new quantitative method to determine the NH4H2PO4 in ABC powder extinguishing agent and to distinguish between ABC and BC powder extinguishing agents using near infrared diffuse reflectance spectroscopy is proposed. A PLS calibration model for the NH4H2PO4 content in extinguishing agent powder was established, with RMSECV = 2.1, RMSEP = 2.4. An identification model for ABC and BC powder extinguishing agents was built by SIMCA and the identification accuracy rate is 100%. This method, compared to the present standard method, has the characteristics of rapidness and easy operation, whichis fit for the quantitative analysis and type distinguishing of the fire products on site.
RÉSUMÉ
CO(2) capture and storage (CCS) is an important alternative to control greenhouse gas (GHG) effects. In previous work, a novel desublimation CO(2) capture process has been exploited making use of three free piston Stirling coolers (namely, SC-1, SC-2, and SC-3, respectively). Based on the developed system, moisture and CO(2) in the flue gas can condense and desublimate in the prefreezing and main-freezing towers, respectively. Meanwhile, the storage column is chilled by SC-3 to preserve the frosted CO(2), and permanent gas (such as N(2)) passes through the system without phase change. The whole process can be implemented at atmospheric pressure and reduce the energy penalty (e.g., solvent regeneration and pressure drop) in other technologies. In this work, the influence of process parameters has been investigated in detail. The optimal conditions for the system are as follows: idle operating time is 240 min, flow rate is 5 L/min, vacuum degree of the interlayer is 2.2 × 10(3) Pa, and temperatures of SC-1, -2, and -3 are -30, -120, and -120 °C, respectively. Under these conditions, the energy consumption of the system is around 0.5 MJ(electrical)/kg CO(2) with above 90% CO(2) recovery.