Resveratrol facilitates bone formation in high-glucose conditions.

Periodontitis is known to be affected by high-glucose conditions, which poses a challenge to periodontal tissue regeneration, particularly in bone formation. In this study, the potential effects of resveratrol (3,5,4'-trihydroxystilbene, RSV) in facilitating bone formation under high-glucose conditions after periodontitis has been investigated. We focused on the analysis of osteoblasts and periodontal ligament cells, which are essential for bone formation including cell proliferation and differentiation. And we aimed to investigate the impact of RSV on bone healing, employed diabetic mouse model induced by streptozotocin and confirmed through histological observation. High-glucose conditions adversely affected cell proliferation and ALP activity in both MC3T3-E1 and hPDLF in vitro, with more significant impact on MC3T3-E1 cells. RSV under high-glucose conditions had positive effects on both, showing early-stage effects for MC3T3-E1 cells and later-stage effects for hPDLF cells. RSV seemed to have a more pronounced rescuing role in MC3T3-E1 cells. Increased ALP activity was observed and the expression levels of significant genes, such as Col 1, TGF-ß1, ALP, and OC, in osteogenic differentiation were exhibited stage-specific expression patterns. Upregulated Col 1 and TGF-ß1 were detected in the early stage, and then ALP and OC expressions became more pronounced in the later stages. Similarly, stronger positive reactions against RUNX2 were detected in the RSV-treated group compared to the control. Furthermore, in in vivo experiment, RSV stimulates the growth and differentiation of osteoblasts, thereby promoting bone formation. High-glucose levels have the potential to impair cellular functions and the regenerative capacity to facilitate bone formation with MC3T3-E1 rather than hPDLF cells. Resveratrol appears to facilitate the inherent abilities of MC3T3-E1 cells compared with hPDLF cells, indicating its potential capacity to restore functionality during periodontal regeneration.

Prohibitin modulates periodontium differentiation in mice development.

Introduction: Prohibitin (PHB) is an essential scaffold protein that modulates signaling pathways controlling cell survival, metabolism, inflammation, and bone formation. However, its specific role in periodontium development remains less understood. This study aims to elucidate the expression pattern and function of PHB in periodontium development and its involvement in alveolar bone formation. Methods: Immunolocalization of PHB in the periodontium of postnatal (PN) mice were examined. Phb morpholino was micro-injected into the right-side mandible at PN5, corresponding to the position where the alveolar bone process forms in relation to the lower first molar. The micro-injection with a scramble control (PF-127) and the left-side mandibles were used as control groups. Five days post-micro-injection, immunohistochemical analysis and micro-CT evaluation were conducted to assess bone mass and morphological changes. Additionally, expression patterns of signaling molecules were examined following Phb downregulation using 24-h in vitro cultivation of developing dental mesenchyme at E14.5. Results: The immunostaining of PHB showed its localization in the periodontium at PN5, PN8, and PN10. The in vitro cultivation of dental mesenchyme resulted in alterations in Bmps, Runx2, and Wnt signalings after Phb knock-down. At 5 days post-micro-injection, Phb knocking down showed weak immunolocalizations of runt-related transcription factor (RUNX2) and osteocalcin (OCN). However, knocking down Phb led to histological alterations characterized by decreased bone mass and stronger localizations of Ki67 and PERIOSTIN in the periodontium compared 1 to control groups. The micro-CT evaluation showed decreased bone volume and increased PDL space in the Phb knock-down specimens, suggesting its regulatory role in bone formation. Discussion: The region-specific localization of PHB in the margin where alveolar bone forms suggests its involvement in alveolar bone formation and the differentiation of the periodontal ligament. Overall, our findings suggest that Phb plays a modulatory role in alveolar bone formation by harmoniously regulating bone-forming-related signaling molecules during periodontium development.

CXCL5/CXCL8 induces neutrophilic inflammation in peri-implantitis.

OBJECTIVE AND BACKGROUND: This research aimed to examine the role of C-X-C motif chemokine ligand 5 (CXCL5) and C-X-C motif chemokine ligand 8 (CXCL8; also known as IL-8) in neutrophilic inflammation triggered by peri-implantitis and to shed light on the underlying mechanisms that link them to the development of this condition. MATERIALS: This study included 40 patients who visited the Department of Periodontology at Kyungpook University Dental Hospital. They were divided into two groups based on their condition: healthy implant (HI) group (n = 20) and peri-implantitis (PI) group (n = 20). Biopsy samples of PI tissue were collected from the patients under local anesthesia. HI tissue was obtained using the same method during the second implant surgery. To construct libraries for control and test RNAs, the QuantSeq 3' mRNA-Seq Library Prep Kit (Lexogen, Inc., Austria) was used according to the manufacturer's instructions. Samples were pooled based on representative cytokines obtained from RNA sequencing results and subjected to Reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Hematoxylin and eosin staining, and immunohistochemistry (IHC) analysis were performed to visually assess expression levels and analyze tissue histology. Student's t-test was employed to conduct statistical analyses. RESULTS: Initially, heatmaps were used to examine gene expression variations between the HI and PI groups based on the results of RNA sequencing. Notably, among various cytokines, CXCL5 and CXCL8 had the highest expression levels in the PI group compared with the HI group, and they are known to be associated with inflammatory responses. In the gingival tissues, the expression of genes encoding cytokines such as interleukin (IL)-1ß, tumor necrosis factor-alpha (TNF)-α, interleukin (IL)-6, and CXCL5/CXCL8 was assessed via RT-qPCR. The mRNA expression level of CXCL5/CXCL8 significantly increased in the PI group compared with the HI group (p < .045). Contrarily, the mRNA expression level of interleukin 36 receptor antagonist (IL36RN) significantly decreased (p < .008). IHC enabled examination of the distribution and intensity of CXCL5/CXCL8 protein expression within the tissue samples. Specifically, increased levels of CXCL5/CXCL8 promote inflammatory responses, cellular proliferation, migration, and invasion within the peri-implant tissues. These effects are mediated through the activation of the PI3K/Akt/NF-κB signaling pathway. CONCLUSIONS: This study found that the PI sites had higher gene expression level of CXCL8/CXCL5 in the soft tissue than HI sites, which could help achieve more accurate diagnosis and treatment planning.

Functional modulation of lysophosphatidic acid type 2 G-protein coupled receptor facilitates alveolar bone formation.

Lipid biosynthesis is recently studied its functions in a range of cellular physiology including differentiation and regeneration. However, it still remains to be elucidated in its precise function. To reveal this, we evaluated the roles of lysophosphatidic acid (LPA) signaling in alveolar bone formation using the LPA type 2 receptor (LPAR2) antagonist AMG-35 (Amgen Compound 35) using tooth loss without periodontal disease model which would be caused by trauma and usually requires a dental implant to restore masticatory function. In this study, in vitro cell culture experiments in osteoblasts and periodontal ligament fibroblasts revealed cell type-specific responses, with AMG-35 modulating osteogenic differentiation in osteoblasts in vitro. To confirm the in vivo results, we employed a mouse model of tooth loss without periodontal disease. Five to 10 days after tooth extraction, AMG-35 facilitated bone formation in the tooth root socket as measured by immunohistochemistry for differentiation markers KI67, Osteocalcin, Periostin, RUNX2, transforming growth factor beta 1 (TGF-ß1) and SMAD2/3. The increased expression and the localization of these proteins suggest that AMG-35 elicits osteoblast differentiation through TGF-ß1 and SMAD2/3 signaling. These results indicate that LPAR2/TGF-ß1/SMAD2/3 represents a new signaling pathway in alveolar bone formation and that local application of AMG-35 in traumatic tooth loss can be used to facilitate bone regeneration and healing for further clinical treatment.

Transcriptomic profiling and the first spatial expression analysis of candidate genes in the salivary gland of the East Asian medicinal leech, Hirudo nipponia.

Hirudo nipponia, a blood-sucking leech native to East Asia, possesses a rich repertoire of active ingredients in its saliva, showcasing significant medical potential due to its anticoagulant, anti-inflammatory, and antibacterial effects against human diseases. Despite previous studies on the transcriptomic and proteomic characteristics of leech saliva, which have identified medicinal compounds, our knowledge of tissue-specific transcriptomes and their spatial expression patterns remains incomplete. In this study, we conducted an extensive transcriptomic profiling of the salivary gland tissue in H. nipponia based on de novo assemblies of tissue-specific transcriptomes from the salivary gland, teeth, and general head region. Through gene ontology (GO) analysis and hierarchical clustering, we discovered a novel set of anti-coagulant factors-i.e., Hni-Antistasin, Hni-Ghilanten, Hni-Bdellin, Hni-Hirudin-as well as a previously unrecognized immune-related gene, Hni-GLIPR1 and uncharacterized salivary gland specific transcripts. By employing in situ hybridization, we provided the first visualization of gene expression sites within the salivary gland of H. nipponia. Our findings expand on our understanding of transcripts specifically expressed in the salivary gland of blood-sucking leeches, offering valuable resources for the exploration of previously unidentified substances with medicinal applications.

Effect of Electrocautery and Laser Treatment on the Composition and Morphology of Surface-Modified Titanium Implants.

The purpose of this study was to investigate the effects of different peri-implantitis treatment methods (Er,Cr:YSGG laser, diode laser, and electrocautery) on various titanium implant surfaces: machined; sandblasted, large-grit, and acid-etched; and femtosecond laser-treated surfaces. Grade 4 titanium (Ti) disks, with a diameter of 10 mm and a thickness of 1 mm, were fabricated and treated using the aforementioned techniques. Subsequently, each treated group of disks underwent different peri-implantitis treatment methods: Er,Cr:YSGG laser (Biolase, Inc., Foothill Ranch, CA, USA), diode laser (Biolase, Inc., Foothill Ranch, CA, USA), and electrocautery (Ellman, Hicksville, NY, USA). Scanning electron microscopy, energy-dispersive X-ray spectroscopy, and wettability were used to characterize the chemical compositions and surfaces of the treated titanium surfaces. Significant changes in surface roughness were observed in both the electrocautery (Sa value of machined surface = 0.469, SLA surface = 1.569, femtosecond laser surface = 1.741, and p = 0.025) and Er,Cr:YSGG laser (Ra value of machined surface = 1.034, SLA surface = 1.380, femtosecond laser surface = 1.437, and p = 0.025) groups. On femtosecond laser-treated titanium implant surfaces, all three treatment methods significantly reduced the surface contact angle (control = 82.2°, diode laser = 74.3°, Er,Cr:YSGG laser = 73.8°, electrocautery = 76.2°, and p = 0.039). Overall, Er,Cr:YSGG laser and electrocautery treatments significantly altered the surface roughness of titanium implant surfaces. As a result of surface composition after different peri-implantitis treatment methods, relative to the diode laser and electrocautery, the Er,Cr:YSGG laser increased oxygen concentration. The most dramatic change was observed after Er:Cr;YSGG laser treatment, urging caution for clinical applications. Changes in surface composition and wettability were observed but were not statistically significant. Further research is needed to understand the biological implications of these peri-implantitis treatment methods.

The Impact of Mechanical Debridement Techniques on Titanium Implant Surfaces: A Comparison of Sandblasted, Acid-Etched, and Femtosecond Laser-Treated Surfaces.

This study evaluated the effects of various mechanical debridement methods on the surface roughness (Ra) of dental implants, comparing femtosecond laser-treated surfaces with conventionally machined and sandblasted with large-grit sand and acid-etched (SLA) implant surfaces. The fabrication of grade 4 titanium (Ti) disks (10 mm in diameter and 1 mm thick) and the SLA process were carried out by a dental implant manufacturer (DENTIS; Daegu, Republic of Korea). Subsequently, disk surfaces were treated with various methods: machined, SLA, and femtosecond laser. Disks of each surface-treated group were post-treated with mechanical debridement methods: Ti curettes, ultrasonic scaler, and Ti brushes. Scanning electron microscopy, Ra, and wettability were evaluated. Statistical analysis was performed using the Kruskal-Wallis H test, with post-hoc analyses conducted using the Bonferroni correction (α = 0.05). In the control group, no significant difference in Ra was observed between the machined and SLA groups. However, femtosecond laser-treated surfaces exhibited higher Ra than SLA surfaces (p < 0.05). The application of Ti curette or brushing further accentuated the roughness of the femtosecond laser-treated surfaces, whereas scaling reduced the Ra in SLA surfaces. Femtosecond laser-treated implant surfaces, with their unique roughness and compositional attributes, are promising alternatives in dental implant surface treatments.

Longitudinal Study of Bone Height Change between Two Approaches for Sinus Floor Elevation.

Background and Objectives: The purpose of this study is to assess the long-term maintenance of each approach of sinus elevation, the crestal approach and lateral approach, by comparing the radiographic results of each technique. Materials and Methods: In total, 103 patients who had undergone an implant procedure with either the crestal approach or lateral approach method applied to their maxillary molar edentulous area were included. Using orthopantomographs, the radiographic changes were consistently evaluated over 3 years after the procedure (immediately after procedure and 1 year, 2 years and 3 years after implant placement) Results: The radiographic evaluation after 3 years of implantation with sinus elevation showed a significant amount of bone formation (8.07 mm for crestal approach and 12.00 mm for lateral approach method). The largest amount of grafted height loss occurred during the 1 year, but the resorption was minimal (0.98 mm for crestal approach and 0.95 mm for lateral approach method) over the entire 3 years. Conclusions: Although the lateral approach showed more bone growth, the amount of bone resorption was similar to that of the crestal approach. Both methods showed the highest amount of bone resorption in the first year, and the amount of change thereafter was insignificant. It is judged that both methods can be used according to the situation to help implant placement.

Long-Term Survival Rate of Autogenous Tooth Transplantation: Up to 162 Months.

Background and Objectives: The purpose of this study is to observe the usefulness of autogenous tooth transplantation by examining the cumulative survival rate according to the period of auto-transplanted teeth as pre-implant treatment. Materials and Methods: This study was conducted on 111 patients who visited Kyungpook National University Dental Hospital and underwent autogenous tooth transplantation between November 2008 and January 2021 (about 13 years). The cumulative survival rate of autogenous tooth transplantation according to the causes of extraction of the recipient tooth (caries, periapical lesion, crack, crown fracture, periodontitis) and condition of opposing teeth (natural teeth vs. fixed prosthesis). The cumulative survival rate of autogenous tooth transplantation according to the age (under 30 vs. over 30) was also investigated and it was examined whether there were any differences in each factor. Results: The average follow-up period was 12 months, followed by a maximum of 162 months. The 24-month cumulative survival rate of all auto-transplanted teeth was 91.7%, 83.1% at 60 months and the 162-month cumulative survival rate was 30.1%. There were no statistical differences between the causes of extraction of the recipient's teeth, differences in the condition of the opposing teeth, and differences under and over the age of 30. Conclusions: The survival rate of autogenous tooth transplantation appears to be influenced by the conditions of the donor tooth rather than the conditions of the recipient tooth. Although autogenous tooth transplantation cannot completely replace implant treatment, it is meaningful in that it can slightly delay or at least earn the time until implant placement is possible.

Comparison of Osseointegration of Dental Implants Placed in Rabbit Tibia Using Two Dental Laser and Implant Handpiece Systems.

The present study aimed to confirm the usefulness of a multi-laser handpiece system currently under development. Implants were placed in the tibia of rabbits using a conventional separate laser-implant handpiece system (control group; SurgicPro+; NSK, Kanuma, Japan and Epic 10; Biolase, Irvine, CA, USA) and a multi-laser handpiece system (experimental group; BLP 10; Saeshin, Daegu, Korea). Implants were placed in left and right tibias of five rabbits using a conventional laser-implant handpiece system and a multi-laser handpiece system (N = 5 per group). Subsequently, micro-computed tomography (micro-CT; bone-to-implant contact evaluation), implant stability quotient (ISQ) measurement, and histological evaluations were performed to confirm the implant placement results. The independent t-test and the paired t-test were used to compare the ISQ values and the results of the two implant-laser handpiece groups (α = 0.05), respectively. No statistically significant difference in micro-CT, ISQ, and histological evaluations was observed between implant placement by the two systems (p > 0.05) except implant initial stability. The use of the multi-laser handpiece system is expected to produce the same results as a conventional separate laser-implant handpiece system with the higher implant initial stability. Additionally, it will potentially make the clinical environment more pleasant and will provide convenience for the clinicians.

Effects of erythropoietin on osteoblast in the tooth extraction socket in mice periodontitis model.

Periodontitis is an excessive inflammatory event in tooth-supporting tissues and can cause tooth loss. We used erythropoietin (EPO), which has been reported to play an important role in bone healing and modulation of angiogenesis, as a therapeutic agent in vivo and in vitro experimental models to analyze its effect on periodontitis. First, EPO was applied to in vitro MC3T3-E1 cells and human periodontal ligament fibroblast (hPDLF) cells to examine its function in altered cellular events and gene expression patterns. In vitro cultivation of MC3T3-E1 and hPDLF cells with 10 IU/ml EPO at 24 and 48 h showed an obvious increase in cell proliferation. Interestingly, EPO treatment altered the expression of osteogenesis-related molecules, including alkaline phosphatase (ALP), bone morphogenetic protein-2 (BMP-2), and osteocalcin (OC) in MC3T3-E1 cells but not in hPDLF cells. In particular, MC3T3-E1 cells showed increased expression of ALP, BMP-2, and OC on day 5, while hPDLF cells showed increased expression of BMP-2, and OC on day 14. Based on the in vitro examination, we evaluated the effect of EPO on bone formation using an experimentally-induced animal periodontitis model. After the induction of periodontitis in the maxillary left second M, 10 IU/ml of EPO was locally applied to the extraction tooth sockets. Histomorphological examination using Masson's trichrome (MTC) staining showed facilitated bone formation in the EPO-treated groups after 14 days. Similarly, stronger positive reactions against vascular endothelial growth factor (VEGF), cluster of differentiation 31 (CD31), runt-related transcription factor 2 (RUNX2), and osteocalcin (OC) were detected in the EPO-treated group compared to the control. Meanwhile, myeloperoxidase, an inflammatory marker, was decreased in the EPO-treated group on days 1 and 5. Overall, EPO facilitates bone healing and regeneration through altered signaling regulation and modulation of inflammation in the osteoblast cell lineage and to a lesser extent in hPDLF cells.

A Comparative Immunohistochemical Study of Wound Healing after Dental Diode Laser Treatment in the Rat Oral Mucosa.

This study aimed to examine the differences in healing patterns using two types of diode laser devices (laser A and laser B) and a steel scalpel for periodontal surgery through histological and immunohistochemical methods. Twenty 12-week-old male rats were assigned to three groups (3, 7, and 14 days). Square-shaped erosion wounds (2 × 2 mm2 diameter) were created on the hard palate of each rat. Two wounds were created using Laser A and a steel scalpel (Bard-Parker No. 15) on the right palate and using Laser B and a steel scalpel on the left side. Rats were sacrificed after 3, 7, and 14 days. Tissues were collected with a margin of 1 mm from the border of the erosional wound of the maxillary hard palate. Histological and immunohistochemical analyses were performed on the tissue samples after 3, 7, and 14 days. The tissue healing pattern and expression of inducible nitric oxide synthase (iNOS) and cluster of differentiation (CD) were observed under a light microscope. Statistical analysis was conducted using the Kruskal−Wallis H test for comparison among the groups (α = 0.05). In comparison to the wounds made with the scalpel, wounds treated with lasers A and B showed delayed healing patterns. There was no significant difference between the two laser treatment groups (p > 0.05). The expression of iNOS and CD68 was not significantly different among the three groups after 3 and 7 days (p > 0.05). On day 14, the groups treated with the dental diode lasers showed higher expression than the group treated with the steel scalpel, but no significant difference was observed (p > 0.05). Laser-induced wounds tended to heal slower than surgical wounds performed using a steel scalpel, but histological and immunohistochemical results showed no significant difference between the dental diode laser and scalpel groups.

Long-term outcomes of adjacent and antagonistic teeth after implant restoration: a focus on patient-related factors.

PURPOSE: To investigate factors affecting the antagonistic and adjacent teeth in patients after implant restoration and prosthetic rehabilitation. METHODS: In total, 160 patients who visited Kyungpook National University Dental Hospital for implant surgery, prosthesis placement, and supportive periodontal therapy (SPT) were included in this study. The average follow-up period was 88.06 months, and the maximum was 175 months. Patients' history of smoking, diabetes, hypertension, and osteoporosis was investigated, and panoramic radiographs were taken after surgery and prosthetic treatment. During the follow-up period, extraction and prosthetic/endodontic treatments of the antagonistic and adjacent teeth were analyzed. The statistical analyses were performed using descriptive statistics, the chi-square test, the Fisher exact test, and multiple logistic regression analyses. RESULTS: Treatment was performed on 29.4% of the studied antagonistic teeth with extraction performed in 20.0% and prosthetic treatment in 10.0%. Furthermore, 19.4% of the studied adjacent teeth underwent treatment, of which extraction was performed in 12.5% and prosthetic treatment in 7.5%. The treatment rate for adjacent teeth was 25.3% in smokers, which was higher than that of non-smokers (12.3%) (P=0.039). Patients who were non-adherent to SPT showed a significantly higher rate (19.6%) of antagonistic prosthetic treatment than did those who were adherent (5.5%) (P=0.006). CONCLUSIONS: Implant restoration can affect the adjacent and antagonistic teeth. Smoking, osteoporosis history, and absence of SPT may be risk factors for the treatment of the adjacent and antagonistic teeth.

Resveratrol enhances bone formation by modulating inflammation in the mouse periodontitis model.

OBJECTIVE: To evaluate the effect of resveratrol on periodontal bone regeneration after local delivery and to determine its effect on inflammatory mediators. BACKGROUND: Resveratrol is considered an anti-inflammatory polyphenolic stilbene involved in the modulation of inflammation. MATERIALS AND METHODS: Periodontitis was induced in mouse molars using a 5-day ligature model followed by the left second molar extraction and 50 µM resveratrol treatment for 1 and 2 weeks. We then examined specimens treated for 1 week histologically and with immunostaining. Microfocus-computed tomography (micro-CT) was used to examine the bone volume formation. RESULTS: After 1 week of treatment, proinflammatory cytokine levels (TNF-alpha and IL6), cells exhibiting neutrophil and macrophage marker (MPO), cell proliferation marker (Ki67), and preosteoblastic marker (RUNX2) reactivity decreased in the resveratrol-treated specimens compared to the control group. In contrast, we observed a higher number of CD31-, F4/80-, and osteocalcin- (OCN-) positive cells in the resveratrol-treated specimens. After 2 weeks, micro-CT confirmed an increased bone mass in the region of the extraction socket in the resveratrol-treated group. CONCLUSION: After 1 week, the resveratrol-treated specimens revealed evidence of inflammation modulation compared to the control group. These data suggest that resveratrol not only affects inflammation control but also is useful for treating periodontitis-related tissue defects and bone regeneration.

Stage-specific expression patterns of ER stress-related molecules in mice molars: Implications for tooth development.

The endoplasmic reticulum (ER) is a site where protein folding and posttranslational modifications occur, but when unfolded or misfolded proteins accumulate in the ER lumen, an unfolded protein response (UPR) occurs. A UPR activates ER-stress signalling genes, including inositol-requiring enzyme-1 (Ire1), activating transcription factor 6 (Atf6), and double-stranded RNA-activated protein kinase-like endoplasmic reticulum kinase (Perk), to maintain homeostasis. The involvement of ER stress molecules in metabolic disease and hard tissue matrix formation has been established; however, an understanding of the role of ER-stress signalling molecules in tooth development is lacking. The aims of this study are to define the stage-specific expression patterns of ER stress-related molecules and to elucidate their putative functions in the organogenesis of teeth. This study leverages knowledge of the tissue morphology and expression patterns of a range of signalling molecules during tooth development. RT-qPCR, in situ hybridization, and immunohistochemistry analyses were performed to determine the stage-specific expression patterns of ER-stress-related signalling molecules at important stages of tooth development. RT-qPCR analyses showed that Atf6 and Perk have similar expression levels during all stages of tooth development; however, the expression levels of Ire1 and its downstream target X-box binding protein (Xbp1) increased significantly from the cap to the secretory stage of tooth development. In situ hybridization results revealed that Atf6 and Xbp1 were expressed in cells that form the enamel knot at cap stage and ameloblasts and odontoblasts at secretory stage in stage-specific patterns. In addition, Atf6, Ire1, and Xbp1 expression exhibited distinct localization patterns in secretory odontoblasts and ameloblasts of PN0 molars. Overall, our results strongly suggest that ER-stress molecules are involved in tooth development in response to protein overload that occurs during signaling modulations from enamel knots at cap stage and extracellular matrix secretion at secretory stage.

Effects of an electric toothbrush combined with 3-color light-emitting diodes on antiplaque and bleeding control: a randomized controlled study.

PURPOSE: This randomized controlled study aimed to evaluate the effects of an electric toothbrush with 3 colors of light-emitting diodes (LEDs) on antiplaque and bleeding control. METHODS: This randomized, placebo-controlled, double-blinded, parallel-group clinical trial included 50 healthy adults with gingivitis, who were randomly assigned to 2 groups. The experimental group used electric toothbrushes with 3 colors of LEDs and the control group used the same electric toothbrush as the experimental group, but with LED sources with one-hundredth of the strength. The subjects used the electric toothbrush 3 times a day for 4 minutes each time. As clinical indices, bleeding on marginal probing (BOMP), the Löe-Silness gingival index (GI), and the Turesky-Quigley-Hein plaque index (QHI) were assessed at baseline, at 3 weeks, and at 6 weeks. RESULTS: There were significant decreases in all clinical indices (BOMP, GI, QHI) in both the experimental and control groups compared to baseline at 3 weeks and at 6 weeks. In a comparison between the experimental and control groups, no statistically significant differences were observed for any clinical indices at 3 weeks (P>0.05). However, at 6 weeks, statistically significant differences were observed between the experimental and control groups in BOMP and GI, which are indicators of gingival inflammation (P<0.05). CONCLUSIONS: This study demonstrated that an electric toothbrush combined with 3-color LEDs reduced gingival bleeding and inflammation after 6 weeks.

Effects of resveratrol on bone-healing capacity in the mouse tooth extraction socket.

BACKGROUND AND OBJECTIVE: After tooth extraction, the extraction socket undergoes several steps of soft and hard tissue healing. The healing process of the extraction socket is modulated by a range of signaling factors and biochemical agents. It has been reported that resveratrol, a polyphenolic compound, exhibits various biological effects, including anti-inflammatory, anti-carcinogenic, antioxidant, and anti-aging effects, and protects cardiovascular and bone tissues. In this study, we examined the cellular effects of resveratrol on human periodontal ligament (hPDL) cells and osteoblast-like (MC3T3-E1) cells and evaluated the bone-healing capacity of tooth extraction sockets in mice. MATERIAL AND METHODS: Resveratrol was applied to hPDL and MC3T3-E1 cells to detect cell proliferation and alkaline phosphatase (ALP) activity, and qPCR was employed to understand the gene expression level in vitro. For in vivo experiment, six-week-old C57BL/6 male mice were randomly divided into control (n = 15) and experimental (n = 15) groups and maxillary first molars were extracted by surgery. Experimental groups received 50-µM resveratrol on extraction sockets and analyzed the degree of new bone formation. RESULTS: Treatment of hPDL and MC3T3-E1 cells with resveratrol increased the cell proliferation and ALP activity and enhanced the expression of ALP, BMP-2, BMP-4, and OC genes. Resveratrol enhanced new bone formation in the lingual extraction socket in mice. CONCLUSION: These results suggest that resveratrol increases the cellular physiology of PDL and osteoblast including their proliferation and differentiation and may play an important role in bone-healing capacity after tooth extraction.

Effects of oleanolic acid acetate on bone formation in an experimental periodontitis model in mice.

OBJECTIVE: We evaluated the role of oleanolic acid acetate (OAA), a triterpenoid commonly used in the treatment of liver disorders, inflammatory diseases, and metastasis, in bone formation after tooth loss by periodontitis. BACKGROUND: Periodontitis causes the sequential degradation of the alveolar bone and associated structures, resulting in tooth loss. Several studies have attempted to regenerate the bone for implantation following tooth loss. METHODS: Maxillary left second molar was extracted from 8-week-old male mice following induction of periodontitis by ligature for 5 days. The extraction socket was treated with 50 ng/µL OAA for 1, 2, and 3 weeks. Detailed morphological changes were examined using Masson's trichrome staining, and the precise localization patterns of various signaling molecules, including CD31, F4/80, interleukin (IL)-6, and osteocalcin, were observed. The volume of bone formation was examined by Micro-CT. Osteoclasts were enumerated using tartrate-resistant acid phosphatase (TRAP) staining. For molecular dissection of signaling molecules, we employed the hanging-drop in vitro cultivation method at E14 for 1 day and examined the expression pattern of transforming growth factor (TGF)-ß superfamily and Wnt signaling genes. RESULTS: Histomorphometrical examinations showed facilitated bone formation in the extraction socket following OAA treatment. In addition, OAA-treated specimens showed the altered localization patterns of inflammatory and bone formation-related signaling molecules including CD31, F4/80, IL-6, and osteocalcin. Also, embryonic tooth germ mesenchymal tissue cultivation with OAA treatment showed the significant altered expression patterns of signaling molecules such as transforming growth factor (TGF)-ß superfamily and Wnt signaling. CONCLUSIONS: Oleanolic acid acetate induces bone formation and remodeling through proper modulation of osteoblast, osteoclast, and inflammation with regulations of TGF-ß and Wnt signaling.

Photofunctionalizing effects of hydroxyapatite combined with TiO2 on bone regeneration in rabbit calvarial defects.

The hydrophilicity of bone graft material generally used as a carrier can play an important role in regulating bone morphogenetic protein (BMP) expression at the bone graft site. The hydrophilicity, altering physicochemical properties, and enhancing biological capabilities, can be increased via surface modification through ultraviolet (UV) photofunctionalization and the effect on de novo osteogenesis could be further improved. Therefore, this study aimed to assess the effects of UV-irradiated TiO2 -coated hydroxyapatite (HA) in combination with rhBMP-2 on bone regeneration in rabbit calvarial defects. The hydrophilicity of HA and TiO2 -coated HA pellets was evaluated by measuring the contact angle of water droplets with UV irradiation. To compare de novo osteogenesis in rabbit calvarial defects, the rabbits were segregated into four different groups: negative control, HA, TiO2 -coated HA, and TiO2 -coated HA with UV; histomorphometric analysis and micro-computed tomography (µCT) imaging were performed after 4 and 8 weeks. In vivo analysis revealed that de novo osteogenesis occurred on the critical size defects in all groups and was significantly increased in the TiO2 -coated HA with UV group than in other groups (p < 0.05). The present results indicate that UV photofunctionalization promotes de novo osteogenesis. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1953-1959, 2019.

Effects of Enhanced Hydrophilic Titanium Dioxide-Coated Hydroxyapatite on Bone Regeneration in Rabbit Calvarial Defects.

The regeneration of bone defects caused by periodontal disease or trauma is an important goal. Porous hydroxyapatite (HA) is an osteoconductive graft material. However, the hydrophobic properties of HA can be a disadvantage in the initial healing process. HA can be coated with TiO2 to improve its hydrophilicity, and ultraviolet irradiation (UV) can further increase the hydrophilicity by photofunctionalization. This study was designed to evaluate the effect of 5% TiO2-coated HA on rabbit calvarial defects and compare it with that of photofunctionalization on new bone in the early stage. The following four study groups were established, negative control, HA, TiO2-coated HA, and TiO2-coated HA with UV. The animals were sacrificed and the defects were assessed by radiography as well as histologic and histomorphometric analyses. At 2 and 8 weeks postoperatively, the TiO2-coated HA with UV group and TiO2-coated HA group showed significantly higher percentages of new bone than the control group (p < 0.05). UV irradiation increased the extent of new bone formation, and there was a significant difference between the TiO2-coated HA group and TiO2-coated HA with UV group. The combination of TiO2/HA and UV irradiation in bone regeneration appears to induce a favorable response.