RÉSUMÉ
The relationship between dental fluorosis and alterations in the salivary proteome remains inadequately elucidated. This study aimed to investigate the salivary proteome and fluoride concentrations in urine and drinking water among Thai individuals afflicted with severe dental fluorosis. Thirty-seven Thai schoolchildren, aged 6-16, were stratified based on Thylstrup and Fejerskov fluorosis index scores: 10 with scores ranging from 5 to 9 (SF) and 27 with a score of 0 (NF). Urinary and water fluoride levels were determined using an ion-selective fluoride electrode. Salivary proteomic profiling was conducted via LC-MS/MS, followed by comprehensive bioinformatic analysis. Results revealed significantly elevated urinary fluoride levels in the SF group (p = 0.007), whereas water fluoride levels did not significantly differ between the two cohorts. Both groups exhibited 104 detectable salivary proteins. The NF group demonstrated notable upregulation of LENG9, whereas the SF group displayed upregulation of LDHA, UBA1, S100A9, H4C3, and LCP1, all associated with the CFTR ion channel. Moreover, the NF group uniquely expressed 36 proteins, and Gene Ontology and pathway analyses suggested a link with various aspects of immune defense. In summary, the study hypothesized that the CFTR ion channel might play a predominant role in severe fluorosis and highlighted the depletion of immune-related salivary proteins, suggesting compromised immune defense in severe fluorosis. The utility of urinary fluoride might be a reliable indicator for assessing excessive fluoride exposure.
Sujet(s)
Fluorures , Fluorose dentaire , Protéomique , Salive , Fluorose dentaire/métabolisme , Humains , Enfant , Mâle , Salive/métabolisme , Salive/composition chimique , Femelle , Fluorures/urine , Fluorures/analyse , Adolescent , Protéomique/méthodes , Protéome/analyse , Thaïlande , Protéines et peptides salivaires/métabolisme , Protéines et peptides salivaires/analyse , Protéine CFTR/génétique , Protéine CFTR/métabolisme , Spectrométrie de masse en tandem , Eau de boissonRÉSUMÉ
OBJECTIVES: This study evaluated surface roughness, biaxial flexural strength, and phase transformation of 5Y-PSZ after grinding and polishing with different protocols. MATERIAL AND METHODS: Two commercial 5Y-PSZ, Lava Esthetic (L) and Cercon xt (C), were used and divided into 3 groups: LC and CC represented unpolished control groups; LE and CE were polished with protocol I (EVE DIASYNT® PLUS HP following with EVE DIACERA RA); and LJ and CJ were polished with protocol II (Superfine diamond bur following with Jota ZIR Gloss polishing kit). Surface roughness was evaluated after polishing step-by-step with a contact-type profilometer. After high-gross polishing, the specimens were subjected to biaxial flexural strength test, crystallographic microstructure analysis using an X-ray diffractometer (XRD), and surface micro-topography using scanning electron microscopy (SEM). STATISTICAL ANALYSIS: Surface roughness differences after each step and biaxial flexural strength between groups were evaluated with one-way ANOVA, followed by Bonferroni post-hoc analysis. Changes in surface roughness across four different time points within groups were assessed using one-way repeated measures ANOVA, followed by Bonferroni post-hoc analysis. RESULTS: After high-gross polishing, both polishing protocols showed significantly lower surface roughness than the grinding group (p < 0.05). The LE and CE groups exhibited the highest surface roughness values, which were significant differences from the LJ and CJ groups (p < 0.05). The LE group showed significantly lower biaxial flexural strength compared to the LC group (p < 0.05). However, there was no statistically significant difference in the CE and CJ groups compared to the control group (p > 0.05). Furthermore, all polishing protocols did not change the phase transformation of zirconia. CONCLUSION: Polishing protocol II provided a smoother surface than the protocol I after high-gross polishing, while the biaxial flexural strength of materials remained unaffected.
RÉSUMÉ
This study aimed to evaluate the effects of different resin-coating technique strategies and dual-cure resin luting materials on proximal marginal adaptation and the microtensile bond strengths (µTBSs) of CAD/CAM hybrid ceramic inlays. Extracted human molars were classified into four groups, depending on the coating technique: No coating (None), single coating (1-coating), double coating (2-coating), and flowable resin-coating (Combination). The inlays were bonded with one of the three materials: Panavia V5 (V5), Rely X Ultimate (RXU), and Calibra Ceram (CC). The differences with regard to adaptation were not significant. In the case of µTBS data for V5, no significant differences were observed, whereas for RXU, µTBS values for Combination statistically exceeded those for None and 1-coating. For CC, µTBS values for Combination statistically exceeded those for None, 1-coating, and 2-coating. The coating techniques did not influence the adaptation but influenced the bond strength, and Combination performed the best.
Sujet(s)
Céramiques , Conception assistée par ordinateur , Collage dentaire , Adaptation marginale (odontologie) , Inlays , Test de matériaux , Molaire , Céments résine , Propriétés de surface , Résistance à la traction , Humains , Céramiques/composition chimique , Collage dentaire/méthodes , Céments résine/composition chimique , Techniques in vitro , Analyse du stress dentaire , Porcelaine dentaire/composition chimiqueRÉSUMÉ
INTRODUCTION: In community settings with limited dental personnel and equipment, and in an era when the aerosol transmission of infectious agents is on the rise, a non-invasive approach to caries management is critical. To provide information on non-invasive material selection, the aim of this study was to compare the remineralization effect of commonly used fluoride-containing materials, adjunctive to the everyday use of fluoride toothpaste (F-toothpaste), on primary tooth natural dentin caries. METHODS: Fifty-five specimens were randomly divided into five groups: 38% silver diamine fluoride (SDF), 5% fluoride varnish (F-varnish), glass-ionomer cement (GIC), deionized water (DW) with F-toothpaste slurry, and DW as a control group (n = 11). The lesion depth and mineral density were measured before and after bacterial pH-cycling using micro-computed tomography. The percentage of mineral density change (%MDchange) was quantified. The dependent t-test, Wilcoxon-Signed-Rank Test, and one way ANOVA with Bonferroni correction were used to analyse the data. RESULTS: SDF application reduced lesion depth from 844.6 to 759.1 µm (p < 0.045) while increasing mineral density from 551.4 to 763.0 mgHA/cm3 (p < 0.003). Only mineral density rose from 600.2 to 678.4 mgHA/cm3 (p < 0.013) when GIC was used. The other groups showed no difference. The highest %MDchange was also found after SDF treatment (49.7%, p < 0.05), whereas GIC (17.2%, p < 0.05) presented a higher percentage than the F-varnish (2.0%), F-toothpaste (-1.1%) and no-treatment groups (-1.4%). CONCLUSION: In this in vitro study, where the pH of cycling was almost neutral, using SDF as an adjunct to F-toothpaste resulted in the highest remineralization compared with other remineralizing materials.
RÉSUMÉ
To investigate the influence of phosphoric acid etching on the dentin enamel junction (DEJ) using optical coherence tomography (OCT). Human teeth were assigned to four groups: 1. control, no additional treatment (CT); 2. The primer of "SE Bond2" was applied (SE), 3. "Enamel Conditioner" was applied (EC), 4. "K-etchant syringe" was applied (KE). After treatment, the DEJ was observed using a laser microscope (CLSM), OCT, and scanning electron microscopy (SEM). Additionally, an ultimate tensile strength (UTS) test at the DEJ was performed. No cracks were observed by CLSM. In contrast, cracks were observed all samples by SEM. Additionally, OCT revealed a white line along the DEJ in all KE specimens and some EC specimens. The UTS test showed a significant difference between CT and KE. This study found that phosphoric acid etching may cause excessive demineralization and weaken the DEJ. This fragility was observed using a non-invasive diagnostic method using OCT.
Sujet(s)
Collage dentaire , Céments résine , Humains , Tomographie par cohérence optique/méthodes , Mordançage à l'acide/méthodes , Acides phosphoriques , Émail dentaire , Dentine , Microscopie électronique à balayage , Collage dentaire/méthodesRÉSUMÉ
BACKGROUND: Biofilm deposit on the composite restoration is a common phenomenon and bacterial growth follows the deposition. The study aims to evaluate Streptococcus mutans (S. mutans) early biofilm formation on the surfaces of various dental composite resins by using the real-time quantitative polymerase chain reaction (qPCR) technique. MATERIALS AND METHODS: Thirty-two discs, where eight discs were in each group of Filtek Supreme Ultra (FSU; 3M, St. Paul, MN), Clearfil AP-X (APX; Kuraray Noritake Dental Inc., Tokyo, Japan), Beautifil II (BE2; Shofu, Inc., Kyoto, Japan), and Estelite Sigma Quick (ESQ; Tokuyama Dental, Tokyo, Japan), were fabricated and subjected to S. mutans biofilm formation in an oral biofilm reactor for 12 hours. Contact angles (CA) were measured on the freshly fabricated specimen. The attached biofilms underwent fluorescent microscopy (FM). S. mutans from biofilms were analyzed using a qPCR technique. Surface roughness (Sa) measurements were taken before and after biofilm formation. Scanning electron microscopy (SEM), including energy dispersive X-ray spectrometer (EDS) analysis, was also performed for detecting relative elements on biofilms. RESULTS: The study showed that FSU demonstrated the lowest CA while APX presented the highest values. FM revealed that condensed biofilm clusters were most on FSU. The qPCR results indicated the highest S. mutans DNA copies in the biofilm were on FSU while BE2 was the lowest (p < 0.05). Sa test signified that APX was significantly the lowest among all materials while FSU was the highest (p < 0.05). SEM displayed areas with apparently glucan-free S. mutans more on BE2 compared to APX and ESQ, while FSU had the least. Small white particles detected predominantly on the biofilms of BE2 appeared to be Si, Al, and F extruded from the resin. CONCLUSION: Differences in early biofilm formation onto various composite resins are dependent on the differences in material compositions and their surface properties. BE2 showed the lowest quantity of biofilm accumulation compared to other resin composites (APX, ESQ, and FSU). This could be attributed to BE2 proprieties as a giomer and fluoride content.
RÉSUMÉ
STATEMENT OF PROBLEM: Delamination of veneering ceramic is one of the most common challenges relating to veneered zirconia restorations. Additive manufacturing (AM) is a fast-expanding technology that has gained widespread acceptance in dentistry and is increasingly being used to produce dental restorations. However, information about bonding of porcelain to AM zirconia is lacking. PURPOSE: The purpose of this in vitro study was to investigate the shear bond strength (SBS) of porcelain to milled and additively manufactured zirconia, and the effect of surface treatment on bond strength. MATERIAL AND METHODS: A Ø12×5-mm disk was designed virtually to fabricate all specimens, which were divided into 2 groups according to the manufacturing technique: additively manufactured or milled zirconia. The effect of airborne-particle abrasion and a zirconia liner before porcelain application was investigated in both groups. Veneering porcelain was fired into an alumina ring mold on the zirconia surface. SBS was measured by using a universal testing machine at a crosshead speed of 1 mm/min before and after aging (n=10). SBS data were analyzed with 3-way ANOVA (α=.05) RESULTS: A significant difference was found between milled and AM zirconia. The SBS of porcelain to milled zirconia was significantly higher (1.38 MPa) than to AM zirconia (0.68 MPa) (P<.001). The surface treatment of zirconia had no significant effect on porcelain SBS in either group (P=.254), whereas thermocycling significantly reduced the SBS of porcelain to zirconia in both milled and AM groups (P=.001). CONCLUSIONS: Porcelain bonding to milled zirconia was better than to AM zirconia. Pretreating the zirconia substrate before porcelain application did not improve the porcelain bond.
RÉSUMÉ
PURPOSE: To evaluate the effects of etching mode (self-etch and etch-and-rinse) on acid-base resistant zone (ABRZ) formation at the resin cement/enamel interface and enamel etching pattern, as well as the effects of thermocycling (0, 5000, and 10,000 cycles) on the enamel microshear bond strength (µSBS) mediated by dual-cure resin cements (DCRC). MATERIALS AND METHODS: Two DCRC were used in 4 groups: Panavia V5 in self-etch (V5NE) and etch-and-rinse mode (V5E); and Estecem II in self-etch (ENE) and etch-and-rinse mode (EE). For ABRZ observation, the bonded interface was subjected to a demineralizing solution. The morphological attributes of the interface and etching patterns were observed using FE-SEM. For µ-SBS, cylinders with a 0.79-mm internal diameter and 0.5-mm height were made with DCRC and tested in shear after 0, 5000, and 10,000 thermal cycles (TC) (5°C and 55°C) (n = 10). RESULTS: The formation of an enamel ABRZ was observed in all groups with different morphological features between self-etch and etch-and-rinse groups. A funnel-shaped erosion beneath the interface was present using V5NE and ENE modes where enamel was dissolved, while ABRZ formation was confirmed and no funnel-shaped erosion was noticed using V5E and EE. No significant differences in µSBS were observed between resin cements. However, significantly lower µSBSs were recorded when the self-etching mode was used. Thermocycling resulted in a significant reduction in µSBS for all groups. CONCLUSION: Selective enamel etching should be recommended to improve the interfacial quality when dual-cure resin luting cements are used.
Sujet(s)
Collage dentaire , Céments résine , Céments résine/composition chimique , Mordançage à l'acide/méthodes , Collage dentaire/méthodes , Émail dentaire , Acides phosphoriques/composition chimique , Test de matériaux , Résistance au cisaillement , Agents de collage dentinaire/composition chimiqueRÉSUMÉ
This study aimed to evaluate the effect of pre-etching for two-step self-etch adhesive bonding to bur-cut and uncut enamel. Bur-cut and uncut enamel surfaces were assigned to surface treatments of no etchant (CT), Enamel Conditioner (EC; Shofu, Kyoto, Japan), or K-etchant syringe (KE; Kuraray Noritake Dental, Tokyo, Japan). The bonded samples were thermal cycled and evaluated by microshear bond strength (µSBS). The adhesive interface after acid-base challenge and the conditioned enamel surfaces were morphologically analyzed using scanning electron microscopy (SEM). For bur-cut enamel, EC and KE pre-etching significantly improved µSBS. For uncut enamel, KE showed higher µSBS than EC. SEM observation revealed that only KE removed the prismless layer of the uncut enamel surface. EC could improve enamel bonding and appears to be a substitute for phosphoric acid, especially for bur-cut enamel. However, uncut enamel could not be effectively conditioned by EC with a lower bond strength than KE.
Sujet(s)
Collage dentaire , Agents de collage dentinaire , Agents de collage dentinaire/pharmacologie , Agents de collage dentinaire/composition chimique , Céments résine/composition chimique , Dentine , Mordançage à l'acide , Test de matériaux , Résistance à la traction , Microscopie électronique à balayageRÉSUMÉ
PURPOSE: The purpose of this study was to investigate the reaction products formed by application of three tooth etchants to hydroxyapatite. METHODS: Tooth etchants with three different compositions, designed for application to teeth before dental adhesive - " K-etchant GEL" (containing phosphoric acid), "Enamel Conditioner" (containing organic acids), and "Multi Etchant" (containing acidic monomer) - were applied to hydroxyapatite plates. RESULTS: Atomic force microscopy measurements revealed that Multi Etchant formed nano-sized particles on the hydroxyapatite. X-ray diffraction and Fourier transform infrared spectrometer analyses of the powdered hydroxyapatite indicated that Enamel Conditioner produced calcium tartrate whereas K-etchant GEL generated monetite. These results indicated that each etchant reacted with hydroxyapatite in a different way. CONCLUSION: Not only differences among the etching ability of etchants, but also differences in the reaction compounds they produce may influence bonding performance in clinical practice.
Sujet(s)
Collage dentaire , Durapatite , Acides phosphoriques , Émail dentaire , Diffraction des rayons X , Collage dentaire/méthodes , Test de matériaux , Microscopie électronique à balayage , Céments résineRÉSUMÉ
STATEMENT OF PROBLEM: Additive manufacturing (AM) is a technology that has been recently introduced into dentistry for fabricating dental devices, including interim restorations. Printing orientation is one of the important and influential factors in AM that affects the accuracy, surface roughness, and mechanical characteristics of printed objects. However, the optimal print orientation for best bond strength to 3D-printed interim restorations remains unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effect of printing orientation on the surface roughness, topography, and shear bond strength of AM interim restorations to composite resin. MATERIAL AND METHODS: Disk-shaped specimens (Ø20×10 mm) were designed by a computer-aided design software program (Geomagic freeform), and a standard tessellation language (STL) file was obtained. The STL file was used for the AM of 60 disks in 3 different printing orientations (0, 45, and 90 degrees) by using E-Dent 400 C&B material. An autopolymerizing interim material (Protemp 4) was used as a control group (CNT), and specimens were fabricated by using the injecting mold technique (n=20). Surface roughness (Sa, Sz parameters) was measured by using a 3D-laser scanning confocal microscope (CLSM) at ×20 magnification. For shear bond testing, the specimens were embedded in polymethylmethacrylate autopolymerized resin (n=20). A flowable composite resin was bonded by using an adhesive system. The specimens were stored in distilled water at 37 °C for 1 day and thermocycled 5000 times. The shear bond strength (SBS) was measured at a crosshead speed of 1 mm/min. The data were analyzed by 1-way ANOVA, followed by the Tukey HSD test (α=.05). RESULTS: The 45-degree angulation printing group reported the highest Sa, followed by the CNT and the 90-degree and 0-degree angulations with significant difference between them (P<.001). The CNT showed the highest Sz, followed by the 45-degree, 90-degree, and 0-degree angulations. The mean ±standard deviation SBS was 28.73 ±5.82 MPa for the 90-degree, 28.21 ±10.69 MPa for the 45-degree, 26.21 ±11.19 MPa for the 0-degree angulations and 25.39 ±4.67 MPa for the CNT. However, no statistically significant difference was found in the SBS among the groups (P=.475). CONCLUSIONS: Printing orientation significantly impacted the surface roughness of 3D-printed resin for interim restorations. However, printing orientation did not significantly affect the bond strength with composite resin.
Sujet(s)
Collage dentaire , Collage dentaire/méthodes , Test de matériaux , Matériaux dentaires/composition chimique , Résines composites/composition chimique , Poly(méthacrylate de méthyle) , Impression tridimensionnelle , Propriétés de surface , Résistance au cisaillement , Céments résine/composition chimiqueRÉSUMÉ
The study aimed to evaluate the influence of the manipulation surfaces on the physical properties of one-step self-etch adhesives (1-SEAs). Scotchbond Universal (SBU), Clearfil Universal Bond Quick ER (UBQ), and an experimental adhesive (UBQexp) were manipulated on different surfaces: manufacturer's Teflon-based dispensing dish (TD) or hydroxyapatite plate (HA). After manipulation of the adhesives, the pH of each 1-SEA was measured. Samples of each adhesive/manipulation surface were prepared and subjected to water sorption (WS)/solubility (SL) and flexural strength tests. The modulus of elasticity (E) was measured in dry and wet conditions before and after 24 h water storage, and the percentage of variation of E (ΔE) was calculated. Results were analyzed using the t-test with Bonferroni corrections (α = 0.05). When adhesives were manipulated on the HA plate, there was a significant increase in the adhesives' pH. WS and SL of all 1-SEAs decreased when the HA was used. Only SBU showed higher flexural strength when manipulated on the HA compared to the manipulation on TD under dry and wet conditions. For each 1-SEA, the use of HA resulted in significantly higher E in dry and wet conditions. ΔE of all adhesives was smaller with the manipulation on HA than on TD. It was concluded that the manipulation of 1-SEA on a hydroxyapatite plate considerably affected the adhesives' properties.
RÉSUMÉ
The effect of a surface pre-reacted glass ionomer (S-PRG)-containing sealant on the demineralization inhibition and remineralization of intact enamel adjacent to the sealant material was investigated. BeautiSealant (BTS, S-PRG sealant, Shofu), Teeth Mate F-12.0 (TMF, fluoride-releasing sealant, Kuraray Noritake Dental), and an experimental silica-filler sealant were investigated. After pH cycling for 10 days, the enamel surface adjacent to the sealant material was observed using confocal laser microscopy and scanning electron microscopy. The polymerized sealant disks were immersed in a demineralized solution (pH: 4.3) to measure pH change. The enamel specimens with polymerized sealant disks were additionally immersed in demineralized solution, followed by energy-dispersive X-ray spectroscopy. The demineralized area of BTS was significantly smaller than that of TMF and SS (p < 0.05). The surfaces adjacent to the sealant of TMF and SS were demineralized, while the surface of BTS was comparatively intact. An increase in pH values were observed in the BTS and TMF groups. Enamel surfaces presented an inhibition of demineralization for BTS and TMF, but not for SS. Fluoride uptake from the polymerized sealant was greater for BTS than for TMF. The S-PRG-containing sealant showed a buffering ability, demineralization inhibition, promotion of remineralization, and it can be advised for clinical applications.
RÉSUMÉ
(1) Background: Dental caries, if diagnosed at the initial stage, can be arrested and remineralized by a non-operative therapeutic approach preserving tooth structure. Accurate and reproducible diagnostic procedure is required for the successful management of incipient caries. The aim of this study was to evaluate the diagnostic accuracy of 3D swept-source optical coherence tomography (3D SS-OCT) for enamel caries at smooth tooth surface if the lesion was with remineralization. (2) Methods: Forty-seven tooth surfaces of 24 extracted human teeth visibly with/without enamel caries (ICDAS code 0−3) were selected and used in this study. The tooth surfaces of investigation site were cleaned and visually examined by four dentists. After the visual inspection, SS-OCT scanning was performed onto the enamel surfaces to construct a 3D image. The 2D tomographic images of the investigation site were chosen from the 3D dataset and dynamically displayed in video and evaluated by the examiners. A five-rank scale was used to score the level of enamel caries according to the following; 1: Intact enamel. 2: Noncavitated lesion with remineralization. 3: Superficial noncavitated lesion without remineralization. 4: Deep nonvacitated lesion without remineralization. 5: Enamel lesion with cavitation. Sensitivity and specificity for 3D OCT image and visual inspection were calculated. Diagnostic accuracy of each diagnostic method was calculated using weighted kappa. Statistical significance was defined at p = 0.05. (3) Results: 3D SS-OCT could clearly depict enamel caries at smooth tooth surface as a bright zone, based on the increased backscattering signal. It was noted that 3D SS-OCT showed higher sensitivity for the diagnosis of remineralized lesions and deep enamel lesions without cavitation, as well as cavitated enamel lesions (p < 0.05). No significant difference of specificity was observed between the two diagnostic methods (p > 0.05). Furthermore, 3D SS-OCT showed higher diagnostic accuracy than visual inspection (p < 0.05). (4) Conclusions: Within the limitations of this in vitro study, 3D SS-OCT showed higher diagnostic capacity for smooth surface enamel caries than visual inspection and could also discriminate lesion remineralization of enamel caries.
RÉSUMÉ
The clinical use of one-retainer RBFDPs in the anterior region has shown higher survival rates compared to conventional two-retainer RBFDPs. The motivation for this study was to assess the validity of this observation when extended to the posterior region. The aim was thus to evaluate different preparation and framework designs for replacing premolars, particularly one-retainer versus two-retainer designs, on the retention of monolithic zirconia posterior RBFDPs. Extracted caries-free human premolars and third molars were embedded in auto-curing resin to create models with an edentulous space of premolar width. Abutment teeth were prepared according to these six designs (n = 8 each): one or two upper retainers with narrow rests, one or two upper retainers with wide rests, and one or two-retainers with wide rests. RBFDPs were milled from monolithic zirconia (KATANA Zirconia HT), and were adhesively bonded using Panavia V5 with corresponding primers. After thermodynamic loading, the quasi-static tensile force required for failure was determined. Failure modes were evaluated using a microscope. Survival rates after thermodynamic loading were 75% for one group (one upper-molar retainer with narrow rest), 100% for the other groups. The debonding forces ranged from 310 ± 224 N (group one upper-molar retainer with narrow rest) to 927 ± 292 N (group two upper retainers with narrow rests). Two-retainer designs failed at significantly higher tensile forces than designs with one retainer (p ≤ 0.05). There were no significant differences between upper and lower designs, or rest widths. Although RBFDPs with two retainers withstood higher debonding forces, RBFDPs with one retainer and wide rest still have a high potential for clinical treatment because of the high forces required for their debonding.
Sujet(s)
Prothèse dentaire partielle fixe à liaison résine , Humains , Mastication , Molaire , Céments résineRÉSUMÉ
PURPOSE: To investigate the bond strength of resin cement to additively manufactured (AM) zirconia with different porosities when compared to milled zirconia. MATERIALS AND METHODS: A 12 × 5 mm disk virtual design file was used to fabricate a total of 48 disks divided into 4 groups: 3 groups were AM with different porosities including 0%-porosity (AMZ0 group), 20%-porosity (AMZ20 group), and 40%-porosity (AMZ40 group), and 1 milled zirconia (control or CNCZ group). The dimensions of all specimens were measured using a digital caliper. A 3D- confocal laser scanner was used to analyze surface morphology and measure the surface roughness (Sa), followed by SEM analysis. Tensile bond strength of composite resin cement to specimens was measured before and after aging procedures using a universal testing machine (n = 10). Failure modes were evaluated under a light microscope. Volumetric change data was analyzed using one-way ANOVA, and two-way ANOVA was used to compare bond strength values (α = 0.05). RESULTS: There was a significant difference in volumetric changes among the groups. The CNCZ group showed the least changes in diameter 0.027 ± 0.029 mm and thickness 0.030 ± 0.012 mm and AM zirconia with 40% porosity showed the most volumetric changes in diameter 5.237 ± 0.023 mm. ANOVA test indicated an overall significant difference in surface roughness across all groups (F = 242.6, p < 0.001). The CNCZ group showed the highest mean Sa of 1.649 ± 0.240 µm, followed by AMZ40 group with Sa of 0.830 ± 0.063 µm, AMZ20 group with Sa of 0.780 ± 0.070 µm, and the AMZ0 group with Sa of 0.612 ± 0.063 µm. Two-way ANOVA showed significant difference in bond strength between the CNCZ group 12.109 ± 3.223 MPa and the AMZ0 group 8.629 ± 0.914 MPa, with significant pretest failures in specimens with porosities. Thermal cycling methods reduced the bond strength non-significantly in CNCZ group with no effect in the AMZ0 group. CONCLUSION: Milled zirconia had a higher surface roughness and bond strength to composite resin cement than AM zirconia, and porosities in AM zirconia decreased the bond strength with significant pretest failures.
Sujet(s)
Collage dentaire , Résines composites , Collage dentaire/méthodes , Test de matériaux , Porosité , Propriétés de surface , ZirconiumRÉSUMÉ
OBJECTIVE: The aim of this study was to assess the influence of different silicatization protocols with various silane treatment methods on the bond performance to high-translucent zirconia. MATERIALS AND METHODS: High-translucent zirconia specimens were assigned to five groups according to mechanical surface pretreatment: as-sintered (Con), 0.2 MPa alumina sandblasting (AB2), tribochemical silica coating (TSC), 0.2 and 0.4 MPa glass bead air abrasion (GB2) and (GB4). Each group was subjected to 4 different cementation protocols: Panavia SA Universal (SAU), Panavia SA plus (SAP), silane + SAP (S-SAP), and Universal adhesive + SAP (U-SAP). Tensile bond strength (TBS) was measured after 24 h and 10,000 thermocycling (TC). Surface topography, surface energy, and elemental composition of the abraded zirconia surface analyses were completed. TBS data was analyzed using the Weibull analysis method. Surface roughness and surface energy were compared by one-way ANOVA analysis of variance (α = 0.05). RESULTS: After 24 h, higher TBS was achieved with all cementation protocols in AB2 and TSC, also, in GB2 with all protocols except U-SAP, and in GB4 with SAU and S-SAP. After aging, GB4/S-SAP, GB2/S-SAP, AB2/U-SAP, and TSC/S-SAP showed the highest bond strength. GB groups showed the lowest surface roughness and highest surface energy. CONCLUSION: Glass bead abrasion achieved the durable bond strength to high-translucent zirconia using a separate silane coupling agent while altered surface chemistry, surface energy, and roughness without effect on morphology. CLINICAL RELEVANCE: Glass bead air abrasion is an alternative to alumina sandblasting and tribochemical silica coating and improves bond strength to high translucent zirconia.
Sujet(s)
Collage dentaire , Céments résine , Air abrasion , Oxyde d'aluminium/composition chimique , Céramiques , Collage dentaire/méthodes , Analyse du stress dentaire , Test de matériaux , Céments résine/composition chimique , Silice/composition chimique , Propriétés de surface , Zirconium/composition chimiqueRÉSUMÉ
PURPOSE: To evaluate effect of air-particle abrasion protocol and primer on surface topography and bond strength of resin cement to high-translucent zirconia ceramics. MATERIALS AND METHODS: Two hundred disk-shaped high-translucent zirconia specimens of 5Y-PSZ were prepared. The specimens were assigned to 5 groups in terms of particle type and air-particle abrasion pressure: (1) control, (2) alumina with 0.2 MPa-air pressure [AB-0.2], (3) alumina with 0.4 MPa-air pressure [AB-0.4], (4) glass beads with 0.2 MPa-air pressure [GB-0.2], and (5) glass beads with 0.4 MPa-air pressure [GB-0.4]. Two different primers 1% MDP (Experimental) and MDP-silane primer (Clearfil Ceramic Primer Plus) was also tested. Stainless steel rods were bonded to the 5Y-PSZ specimens with PANAVIA V5. For each group, the tensile bond strength (TBS) was measured after 24-hour water storage (n = 10) and after 5000 thermal-cycling (n = 10) at crosshead speed of 2 mm/min. The data were statistically analyzed using Weibull analysis. Surface roughness (Sa) was measured using a 3D-Laser Scanning Confocal Microscope (n = 5) and analyzed by t-test with Bonferroni correction. Surface topography using scanning electron microscopy (SEM) and surface elemental analysis using energy dispersion spectroscopy (EDX), and cross-section SEM at the interface with composite cement were also investigated. RESULTS: In MDP-silane groups, the highest TBS was observed in AB-0.4 after 24 hours and GB-0.4 after thermal-cycling (p < 0.05). In MDP groups, AB groups resulted in the significantly higher TBS than GB groups (p < 0.05). AB-0.4 group showed the highest Sa value compared to all groups (p < 0.005), meanwhile GB groups did not show different Sa compared to control (p > 0.005). CONCLUSION: Air-abrasion with different particle and blasting pressure can improve bonding to zirconia with proper primer selection. Particularly, glass beads abrasion followed by MDP-silane primer and alumina abrasion followed by MDP primer alone provided stable bond strength of resin cement to high-translucent zirconia after aging. High-translucent zirconia abraded with glass beads achieves a desirable bonding performance without creating surface microcracks which may hinder zirconia's mechanical properties.
Sujet(s)
Collage dentaire , Oxyde d'aluminium/composition chimique , Céramiques , Collage dentaire/méthodes , Analyse du stress dentaire , Test de matériaux , Céments résine/composition chimique , Céments résine/usage thérapeutique , Résistance au cisaillement , Propriétés de surface , Zirconium/composition chimiqueRÉSUMÉ
STATEMENT OF PROBLEM: The bonding of light-activated adhesives to root canal dentin with an additional touch-polymerization activator has been insufficiently examined. PURPOSE: The purpose of this in vitro study was to investigate the effect of touch-polymerization activators and extended light-irradiation time on the microtensile bond strength (µTBS) of light-activated adhesives. MATERIAL AND METHODS: Post cavities were prepared in 50 extracted mandibular premolars and bonded using Prime&Bond Universal (PBU); PBU+Self Cure Activator (SCA); Clearfil SE Bond 2 (SEB); SEB+Clearfil DC Activator (DCA); or Clearfil Universal Bond Quick ER (UBQ). After light-irradiation for 10 or 20 seconds, the post cavities were filled with dual-activated resin core materials. Eight beams were prepared per specimen and subjected to the µTBS test. The µTBS data were analyzed by using 3-way ANOVAs with the Bonferroni correction (α=.05). RESULTS: The 3-way ANOVAs indicated that the use of touch-polymerization activators (SCA and DCA) significantly increased the µTBS of PBU and SEB in both the coronal (P=.015) and apical (P=.001) regions. The extension of light-irradiation time to 20 seconds significantly improved their µTBS in the apical region (P<.001), but not in the coronal region (P=.09). Light-irradiation for 20 seconds increased the µTBS of UBQ significantly in the coronal region (P=.014). CONCLUSIONS: Touch-polymerization activators improved the bond strength of light-activated adhesives to root canal dentin, especially when combined with an extended light-irradiation time.
Sujet(s)
Collage dentaire , Agents de collage dentinaire , Résines composites/composition chimique , Ciments dentaires , Cavité pulpaire de la dent , Dentine , Agents de collage dentinaire/composition chimique , Test de matériaux , Polymérisation , Céments résine/composition chimique , Résistance à la traction , ToucherRÉSUMÉ
Root caries is a growing problem for the worldwide aging population. Silver diamine fluoride (SDF) contains high concentrations of silver and fluoride ions, which prevents and arrests root caries, as well as dentin caries in the primary teeth of young children. Unlike other fluoride products that mainly reduce the formation of new carious lesions, 38% SDF is an effective agent that can efficiently arrest the carious process, remineralize the decayed dental tissues, and protect the tooth structure against the formation of new caries lesions. The use of SDF can result in more caries-resistant tooth structures. Despite these merits, its clinical disadvantages are the deep penetration of silver ions and sequential formation of silver compounds, which cause esthetic concern due to the discoloration and impaired efficacy of dentin bonding after using SDF. Thus, this narrative review, by addressing the primary experimental results and clinical applications of SDF on root caries, proposes management methods for root caries in conjunction with the application of SDF. We propose a two-visit treatment protocol to take advantage of the SDF application for root surface caries and utilize the discoloration caused by SDF.