RÉSUMÉ
Familial episodic pain syndrome (FEPS) is an early childhood onset disorder of severe episodic limb pain caused mainly by pathogenic variants of SCN11A, SCN10A, and SCN9A, which encode three voltage-gated sodium channels (VGSCs) expressed as key determinants of nociceptor excitability in primary sensory neurons. There may still be many undiagnosed patients with FEPS. A better understanding of the associated pathogenesis, epidemiology, and clinical characteristics is needed to provide appropriate diagnosis and care. For this study, nationwide recruitment of Japanese patients was conducted using provisional clinical diagnostic criteria, followed by genetic testing for SCN11A, SCN10A, and SCN9A. In the cohort of 212 recruited patients, genetic testing revealed that 64 patients (30.2%) harbored pathogenic or likely pathogenic variants of these genes, consisting of 42 (19.8%), 14 (6.60%), and 8 (3.77%) patients with variants of SCN11A, SCN10A, and SCN9A, respectively. Meanwhile, the proportions of patients meeting the tentative clinical criteria were 89.1%, 52.0%, and 54.5% among patients with pathogenic or likely pathogenic variants of each of the three genes, suggesting the validity of these clinical criteria, especially for patients with SCN11A variants. These clinical diagnostic criteria of FEPS will accelerate the recruitment of patients with underlying pathogenic variants who are unexpectedly prevalent in Japan.
Sujet(s)
Dépistage génétique , Canal sodique voltage-dépendant NAV1.7 , Canal sodique voltage-dépendant NAV1.8 , Canal sodique voltage-dépendant NAV1.9 , Humains , Canal sodique voltage-dépendant NAV1.7/génétique , Canal sodique voltage-dépendant NAV1.9/génétique , Japon/épidémiologie , Canal sodique voltage-dépendant NAV1.8/génétique , Mâle , Femelle , Dépistage génétique/méthodes , Adulte , Adolescent , Enfant , Prédisposition génétique à une maladie , Jeune adulte , Enfant d'âge préscolaire , Mutation , Douleur , Rectum/malformationsRÉSUMÉ
Maze-solving is a classical mathematical task, and is recently analogously achieved using various eccentric media and devices, such as living tissues, chemotaxis, and memristors. Plasma generated in a labyrinth of narrow channels can also play a role as a route finder to the exit. In this study, we experimentally observe the function of maze-route findings in a plasma system based on a mixed discharge scheme of direct-current (DC) volume mode and alternative-current (AC) surface dielectric-barrier discharge, and computationally generalize this function in a reinforcement-learning model. In our plasma system, we install two electrodes at the entry and the exit in a square lattice configuration of narrow channels whose cross section is 1×1 mm2 with the total length around ten centimeters. Visible emissions in low-pressure Ar gas are observed after plasma ignition, and the plasma starting from a given entry location reaches the exit as the discharge voltage increases, whose route converging level is quantified by Shannon entropy. A similar short-path route is reproduced in a reinforcement-learning model in which electric potentials through the discharge voltage is replaced by rewards with positive and negative sign or polarity. The model is not rigorous numerical representation of plasma simulation, but it shares common points with the experiments along with a rough sketch of underlying processes (charges in experiments and rewards in modelling). This finding indicates that a plasma-channel network works in an analog computing function similar to a reinforcement-learning algorithm slightly modified in this study.
Sujet(s)
Liquides biologiques , , Récompense , Plasma sanguin , AlgorithmesRÉSUMÉ
INTRODUCTION: Hip fractures are commonly associated with osteoporosis and pose a risk for secondary fractures. Although the administration of anti-osteoporotic drugs is recommended after fractures to mitigate this risk, the potential effect of strong anti-resorptive drugs (e.g., denosumab) on fracture healing processes have not been extensively studied. This prospective study aimed to evaluate the feasibility of early denosumab administration after femoral intertrochanteric fracture surgery and to compare its effect on fracture healing to that of bisphosphonate-treated patients. MATERIALS AND METHODS: Patients who underwent surgery for intertrochanteric femoral fragility fractures between November 2018 and November 2020 were prospectively examined. Patients were randomized into two groups (denosumab [DSM] and ibandronate [IBN] groups) using a simple randomization procedure. Physical findings, plain radiographs, and computed tomography (CT) were used to evaluate fracture healing at 3 months postoperatively. RESULTS: Physical findings showed no significant differences between the two groups in pain on loading, tenderness at fracture site, or walking ability. There were inter-rater differences in radiological fracture healing rate: plain radiographs, 57.5%-81.8% in the DSM group and 51.5%-90.9% in the IBN group; CT, 51.5%-72.7% in the DSM group and 45.4%-81.8% in the IBN group. Although there were variations, there were no significant differences in the fracture healing rate between groups on plain radiographs or CT among all three raters. CONCLUSIONS: Early administration of denosumab after intertrochanteric femoral fracture surgery did not delay radiological or clinical fracture healing times when compared with ibandronate administration.
RÉSUMÉ
There has been only limited success to differentiate adult stem cells into cardiomyocyte subtypes. In the present study, we have successfully induced beating atrial and ventricular cardiomyocytes from rat hair-follicle-associated pluripotent (HAP) stem cells, which are adult stem cells located in the bulge area. HAP stem cells differentiated into atrial cardiomyocytes in culture with the combination of isoproterenol, activin A, bone morphogenetic protein 4 (BMP4), basic fibroblast growth factor (bFGF), and cyclosporine A (CSA). HAP stem cells differentiated into ventricular cardiomyocytes in culture with the combination of activin A, BMP4, bFGF, inhibitor of Wnt production-4 (IWP4), and vascular endothelial growth factor (VEGF). Differentiated atrial cardiomyocytes were specifically stained for anti-myosin light chain 2a (MLC2a) antibody. Ventricular cardiomyocytes were specially stained for anti-myosin light chain 2v (MLC2v) antibody. Quantitative Polymerase Chain Reaction (qPCR) showed significant expression of MLC2a in atrial cardiomyocytes and MLC2v in ventricular cardiomyocytes. Both differentiated atrial and ventricular cardiomyocytes showed characteristic waveforms in Ca2+ imaging. Differentiated atrial and ventricular cardiomyocytes formed long myocardial fibers and beat as a functional syncytium, having a structure similar to adult cardiomyocytes. The present results demonstrated that it is possible to induce cardiomyocyte subtypes, atrial and ventricular cardiomyocytes, from HAP stem cells.
Sujet(s)
Myocytes cardiaques , Cellules souches pluripotentes , Rats , Animaux , Myocytes cardiaques/métabolisme , Facteur de croissance endothéliale vasculaire de type A/métabolisme , Follicule pileux , Différenciation cellulaire , Compléments alimentairesRÉSUMÉ
A unique mechanism of splashing from a tungsten-based anode was identified during arc discharge. Splashing occurred by breakoff of a liquid metal column, which elongates after a local concavity formed on the molten anode surface. Blue-violet luminescence, emitted by cerium ions originating from additives in the tungsten-based anode, was captured before the concavity formation. The surface temperature exceeded the boiling point of the additives at the time of splashing. The measured droplet speeds suggested that an electromagnetic force contributes the high-speed ejections. Energy dispersive spectrometry mapping also exhibited a remnant of the additives on the longitudinal cross-section of the anode after arc discharge. Based on these experimental facts, the mechanism of anode splashing in arc discharge was deduced as follows: bubble formation of additives at temperatures above their boiling point, bubble bursting at the surface, micro-plasma jet generation, liquid-column elongation and breakoff under an electromagnetic force, and consequent high-speed droplet ejection.
RÉSUMÉ
This study aimed to clarify the effect of wire structure and alkaline elements in wire composition on metal transfer behavior in metal-cored arc welding (MCAW). A comparison of metal transfer in pure argon gas was carried out using a solid wire (wire 1), a metal-cored wire without an alkaline element (wire 2), and another metal-cored wire with 0.084 mass% of sodium (wire 3). The experiments were conducted under 280 and 320 A welding currents, observed by high-speed imaging techniques equipped with laser assistance and bandpass filters. At 280 A, wire 1 showed a streaming transfer mode, while the others showed a projected one. When the current was 320 A, the metal transfer of wire 2 changed to streaming, while wire 3 remained projected. As sodium has a lower ionization energy than iron, the mixing of sodium vapor into the iron plasma increases its electrical conductivity, raising the proportion of current flowing through metal vapor plasma. As a result, the current flows to the upper region of the molten metal on the wire tip, with the resulting electromagnetic force causing droplet detachment. Consequently, the metal transfer mode in wire 3 remained projected. Furthermore, weld bead formation is the best for wire 3.
RÉSUMÉ
Droplet ejections from a molten tungsten electrode during alternating current tungsten inert gas (AC TIG) welding were observed successfully by a high-speed video captured at 75,000 fps. The welding conditions and timings that were likely to occur were investigated. The electrode surface temperature was also measured. A crater was formed on the surface of the electrode, and a droplet ejection occurred following the separation of the tip of the ridge growing from the centre of the crater. A series of droplet ejections occurred on a time scale of approximately 0.4 ms. Our results showed that the high temperature of the electrode surface was the common factor for droplet ejections. The dominant force for droplet ejection was discussed by estimating the balance of forces acting on the molten electrode surface. The pressure due to surface tension was the largest pressure at any time during the AC cycle, which decreased in the second half of the EP period. Our findings suggest that the surface tension was the dominant force for changing the electrode shape and that droplet ejections occurred when the surface tension decreased due to the increase in the electrode surface temperature.
RÉSUMÉ
Water plasma coupled with mist generator was introduced to perform the decomposition of caffeine (CAF) wastewater. The mist-shaped water molecule was directly used for plasma-forming gas with no additional gas. The influence of arc current on the decomposition of CAF was elucidated in detail. With the increase of input power from 0.8 to 1.1 kW according to arc current, the removal efficiency of total organic carbon (TOC) and CAF increased, reaching 91.1 and 99.8% at 9.5 A, respectively. H2, CO, CO2, and N2 were major effluent gaseous species, of which the H2 generation was more than 40% for all conditions. The concentration of nitrate in the effluent liquids was the highest at 9.5 A due to a higher oxidation environment. The H, O, and OH as reactive species formed via the dissociation of water molecules were demonstrated, and the plasma temperatures were at over 5000 K. The detailed decomposition pathway was deduced based on eleven intermediate products identified in this process. Electron impact and hydroxyl radical were found to take leading roles in the decomposition of CAF.
Sujet(s)
Eaux usées , Eau , Caféine , Carbone , Dioxyde de carbone , Gaz , Radical hydroxyle , NitratesRÉSUMÉ
A novel bypass coupling variable polarity plasma arc was proposed to achieve the accurate adjusting of heat and mass transfer in the welding and additive manufacturing of aluminum alloy. However, the physical characteristics and decoupled transfer behavior remain unclear, restricting its application and development. A three-dimensional model of the bypass coupling variable polarity plasma arc was built based on Kirchhoff's law, the main arc and the bypass arc are coupled by an electromagnetic field. The model of current attachment on the tungsten electrode surface is included for simulating different heating processes of the EP and EN phases in the coupling arc. The distribution of temperature field, flow field, and current density of the bypass coupling variable polarity plasma arc was studied by the three-dimensional numerical model. The heat input on the base metal under different current conditions is quantified. To verify the model, the arc voltages are compared and the results in simulation and experiment agree with each other well. The results show that the radius of the bypass coupling arc with or without bypass current action on the base metal is different, and the flow vector of the bypass coupling arc plasma with bypass current is larger than the arc without bypass current. By comparing the heat transfer on the electrodes' boundary under different current conditions, it is found that increasing the bypass current results in the rise in heat input on the base metal. Therefore, it is concluded that using bypass current is unable to completely decouple the wire melting and the heat input of the base metal. The decoupled degree of heat transfer is one of the important factors for accurate control in the manufacturing process with this coupling arc.
RÉSUMÉ
INTRODUCTION: Cognitive function is an important factor that affects functional recovery after hip fracture (HipFx) surgery. The literature on the pathophysiology of dementia in HipFx patients is scarce. We performed a differential diagnosis of dementia in HipFx patients using clinical and brain MRI findings. METHODS: This is a prospective study in which brain MRI was evaluated for patients with HipFx for research purposes. One-hundred-and-five HipFx patients (85 females and 20 males) who underwent surgery and were subsequently able to undergo brain MRI at our hospital were evaluated. The mean age was 84 years. The presence of dementia was determined based on clinical findings and whether the patient meets its diagnostic criteria according to the International Classification of Diseases 10th Edition (ICD-10). The differential diagnosis of dementia was made based on brain MRI findings and the dementia diagnostic flow chart published in the Clinical Practice Guideline for Dementia 2017 (Japanese Society of Neurology). The Voxel-based Specific Regional Analysis System for Alzheimer's Disease (VSRAD) advance 2 diagnostic software was used to evaluate atrophy of the para-hippocampal gyrus. RESULTS: Fifty-six (53%) patients were clinically diagnosed with dementia according to the ICD-10 criteria. The MRI findings were diverse: Alzheimer's disease (AD)-type, asymptomatic multiple ischemic cerebral lesions, past symptomatic cerebral infarction or cerebral hemorrhage, Binswanger's disease (BW)-type, chronic subdural hematoma, disproportionately enlarged subarachnoidal hydrocephalus (DESH), and their combinations thereof. A combination of MRI and clinical findings of dementia patients demonstrated the following distribution of dementia subtypes: AD (n = 20), vascular dementia (n = 33), AD and BW vascular dementia (n = 3). CONCLUSION: This study revealed that the brain MRI findings of HipFx patients were diverse. Although vascular dementia is found to be common in this particular population, this could be an incidental finding. Further study is warranted to clarify the specificity of our findings by increasing the number of patients, setting the control, and investigating whether dementia subtypes affect postoperative gait acquisition and fall risk.
Sujet(s)
Maladie d'Alzheimer , Démence vasculaire , Fractures de la hanche , Sujet âgé de 80 ans ou plus , Maladie d'Alzheimer/anatomopathologie , Encéphale/imagerie diagnostique , Encéphale/anatomopathologie , Démence vasculaire/épidémiologie , Femelle , Fractures de la hanche/complications , Fractures de la hanche/imagerie diagnostique , Fractures de la hanche/chirurgie , Humains , Imagerie par résonance magnétique , Mâle , Neuroimagerie , Études prospectivesRÉSUMÉ
Nanomaterials show great promise as bone regeneration materials. They can be used as fillers to strengthen bone regeneration scaffolds, or employed in their natural form as carriers for drug delivery systems. A variety of experiments have been conducted to evaluate the osteogenic potential of bone regeneration materials. In vivo, such materials are commonly tested in animal bone defect models to assess their bone regeneration potential. From an ethical standpoint, however, animal experiments should be minimized. A standardized in vitro strategy for this purpose is desirable, but at present, the results of studies conducted under a wide variety of conditions have all been evaluated equally. This review will first briefly introduce several bone regeneration reports on nanomaterials and the nanosize-derived caveats of evaluations in such studies. Then, experimental techniques (in vivo and in vitro), types of cells, culture media, fetal bovine serum, and additives will be described, with specific examples of the risks of various culture conditions leading to erroneous conclusions in biomaterial analysis. We hope that this review will create a better understanding of the evaluation of biomaterials, including nanomaterials for bone regeneration, and lead to the development of versatile assessment methods that can be widely used in biomaterial development.
RÉSUMÉ
Pyridine is a basic heterocyclic compound with high toxicity, widely found in liquid waste from industrial processes. The treatment of highly-concentrated pyridine was demonstrated using a novel mist-type water thermal plasma torch. Decomposition rate and TOC removal rate were more than 94% in all conditions, while the max energy efficiency reached about 23 g/kWh. With a high temperature of 5500-7500 K, more than 95% of carbon content in pyridine was converted into valuable gas products, while a little amount of formic acid and acetic acid were observed as liquid by-products. The production of hydrogen cyanide (HCN) during the thermal decomposition of pyridine was observed, which can be inhibited by increasing the input power. Based on the experimental results, detailed decomposition mechanisms in the high-temperature and the downstream region were discussed respectively. Water plasma shows significant potential in the treatment of non-biodegradable industrial liquid waste.
Sujet(s)
Gaz plasmas , Polluants chimiques de l'eau , Déchets industriels , Pyridines , Eaux usées , Eau , Polluants chimiques de l'eau/analyseRÉSUMÉ
Utilization of heterogenous catalysts to trigger peroxymonosulfate (PMS) activation is considered an efficient strategy for environmental decontamination. Herein, a tightly bonded flake-like 2D/2D BiOBr/MoS2 heterojunction was successfully designed through co-precipitation process. By virtue of matched energy levels and intimate interfacial coupling, the Type-II BiOBr/MoS2 heterojunction significantly expedited charge carrier transfer and thereby promoted the catalytic performance for organic dye oxidation and Cr(VI) reduction. The specially designed BiOBr/MoS2 heterojunction is also conducive to split PMS and continuously generated highly active species (SO4-, OH and O2-) in a photo-Fenton system, achieving extraordinary catalytic capacity for various emerging organic pollutants (including phenol, bisphenol A and carbamazepine). The photoexcited electron with prolonged lifetime and exposed Mo sites with multivalence and multiphase nature can effectively activate PMS, which further promotes the oxidation efficiency of holes, as confirmed by scavenging experiments. The excellent stability and oxidative properties could justify scale up using BiOBr/MoS2 to a small pilot test, implementing the potential value in practical applications. This study would provide novel insight and cognition of PMS activation via a superior heterojunction for complex polluted wastewater treatment.
RÉSUMÉ
OBJECTIVE: Patients with pathogenic cyclin-dependent kinase-like-5 gene (CDKL5) variants are designated CDKL5 deficiency disorder (CDD). This study aimed to delineate the clinical characteristics of Japanese patients with CDD and elucidate possible appropriate treatments. METHODS: We recruited patients with pathogenic or likely pathogenic CDKL5 variants from a cohort of approximately 1,100 Japanese patients with developmental and epileptic encephalopathies, who underwent genetic analysis. We retrospectively reviewed clinical, electroencephalogram, neuroimaging, and genetic information. RESULTS: We identified 29 patients (21 females, eight males). All patients showed severe developmental delay, especially in males. Involuntary movements were observed in 15 patients. No antiepileptic drugs (AEDs) achieved seizure freedom by monotherapy. AEDs achieving ≥ 50% reduction in seizure frequency were sodium valproate in two patients, vigabatrin in one, and lamotrigine in one. Seizure aggravation was observed during the use of lamotrigine, potassium bromide, and levetiracetam. Adrenocorticotrophic hormone (ACTH) was the most effective treatment. The ketogenic diet (KD), corpus callosotomy and vagus nerve stimulation did not improve seizure frequency in most patients, but KD was remarkably effective in one. The degree of brain atrophy on magnetic resonance imaging (MRI) reflected disease severity. Compared with females, males had lower levels of attained motor development and more severe cerebral atrophy on MRI. CONCLUSION: Our patients showed more severe global developmental delay than those in previous studies and had intractable epilepsy, likely because previous studies had lower numbers of males. Further studies are needed to investigate appropriate therapy for CDD, such as AED polytherapy or combination treatment involving ACTH, KD, and AEDs.
Sujet(s)
Anticonvulsivants/usage thérapeutique , Épilepsie/génétique , Syndromes épileptiques/génétique , Protein-Serine-Threonine Kinases/génétique , Spasmes infantiles/génétique , Adolescent , Adulte , Enfant , Enfant d'âge préscolaire , Régime cétogène , Électroencéphalographie , Épilepsie/traitement médicamenteux , Épilepsie/thérapie , Syndromes épileptiques/traitement médicamenteux , Syndromes épileptiques/thérapie , Femelle , Humains , Nourrisson , Japon , Mâle , Études rétrospectives , Spasmes infantiles/traitement médicamenteux , Spasmes infantiles/thérapie , Résultat thérapeutique , Stimulation du nerf vague , Jeune adulteRÉSUMÉ
For future fuel cell operations under high temperature and low- or non-humidified conditions, high-performance polymer electrolyte membranes possessing high proton conductivity at low relative humidity as well as suitable gas barrier property and sufficient membrane stability are strongly desired. In this study, novel nanofiber framework (NfF)-based composite membranes composed of phytic acid (Phy)-doped polybenzimidazole nanofibers (PBINf) and Nafion matrix electrolyte were fabricated through the compression process of the nanofibers. The NfF composite membrane prepared from the pressed Phy-PBINf showed higher proton conductivity and lower activation energy than the conventional NfF composite and recast-Nafion membranes, especially at low relative humidity. It is considered that the compression process increased the nanofiber contents in the composite membrane, resulting in the construction of the continuously formed effective proton conductive pathway consisting of the densely accumulated phosphoric acid and sulfonic acid groups at the interface of the nanofibers and the Nafion matrix. Since the NfF also improved the mechanical strength and gas barrier property through the compression process, the NfF composite polymer electrolyte membranes have the potential to be applied to future fuel cells operated under low- or non-humidified conditions.
RÉSUMÉ
We examined the functional and structural changes of auditory neurons (ANs) in adult mice after conductive hearing loss (CHL). Earplugs (EPs) were bilaterally inserted in male 8-week-old mice for 4 weeks [EP(+) group] and subsequently removed for 4 weeks [EP(+/-) group]. We examined the control mice [EP(-) group] with no EPs inserted at 12 weeks. The auditory brainstem response (ABR) was measured to determine the cochlear function before and after EP insertion, after EP removal, and at 4 weeks following EP removal. We examined the cochleae for hair cell (HC) and spiral ganglion neuron survival, synaptic and neural properties, and AN myelination. There was a significant elevation of the ABR threshold across all tested frequencies after EP insertion. After removing the occlusion, these threshold shifts were fully recovered. Compared with the EP(-) mice, the EP(+) mice showed a significant decrease in the ABR peak 1 amplitude and a significantly prolonged latency at all tested frequencies. There was no significant effect of auditory deprivation on the survival of HCs and ANs. Conversely, auditory deprivation caused significant damage to the synapses and myelin and a significant decrease in the AN size. Although functional changes in the ABR amplitude and latency did not fully recover in the EP(+/-) mice, almost all anatomical changes were fully recovered in the EP(+/-) mice; however, cochlear synapses only showed partial recovery. These results suggest that auditory activities are required to maintain peripheral auditory synapses and myelination in adults. The auditory deprivation model allows for assessment of the mechanisms of synaptopathy and demyelination in the auditory periphery, and synaptic and myelin regeneration in sensorineural hearing loss.
Sujet(s)
Vieillissement/anatomopathologie , Cellules ciliées auditives/anatomopathologie , Surdité de transmission/anatomopathologie , Surdité de transmission/physiopathologie , Dégénérescence nerveuse/physiopathologie , Plasticité neuronale , Alcohol oxidoreductases/métabolisme , Animaux , Protéines corépressives/métabolisme , Potentiels évoqués auditifs du tronc cérébral , Mâle , Souris de lignée C57BL , Gaine de myéline/anatomopathologie , Dégénérescence nerveuse/anatomopathologie , Neurofibres/anatomopathologie , Récepteur de l'AMPA/métabolisme , Ganglion spiral/anatomopathologie , Synapses/métabolismeRÉSUMÉ
Because ultrahigh-molecular-weight polyethylene (UHMWPE) is susceptible to frictional wear when used in sliding members of artificial joints, it is common practice to use cross-linked UHMWPE instead. However, cross-linked UHMWPE has low impact resistance; implant breakage has been reported in some cases. Hence, sliding members of artificial joints pose a major trade-off between wear resistance and impact resistance, which has not been resolved by any UHMWPE. On the other hand, multiwall carbon nanotubes (MWCNTs) are used in industrial products for reinforcement of polymeric materials but not used as biomaterials because of their unclear safety. In the present study, we attempted to solve this trade-off issue by complexing UHMWPE with MWCNTs. In addition, we assessed the safety of these composites for use in sliding members of artificial joints. The results showed the equivalence of MWCNT/UHMWPE composites to cross-linked UHMWPE in terms of wear resistance and to non-cross-linked UHMWPE in terms of impact resistance. In addition, all MWCNT/UHMWPE composites examined complied with the requirements of biosafety testing in accordance with the ISO10993-series specifications for implantable medical devices. Furthermore, because MWCNTs can occur alone in wear dust, MWCNTs in an amount of about 1.5 times that contained in the dust produced from 50 years of wear (in the worst case) were injected into rat knees, which were monitored for 26 weeks. Although mild inflammatory reactions occurred in the joints, the reactions soon became quiescent. In addition, the MWCNTs did not migrate to other organs. Furthermore, MWCNTs did not exhibit carcinogenicity when injected into the knees of mice genetically modified to spontaneously develop cancer. The MWCNT/UHMWPE composite is a new biomaterial expected to be safe for clinical applications in both total hip arthroplasty and total knee arthroplasty as the first sliding member of artificial joints to have both high wear resistance and high impact resistance.
Sujet(s)
Arthroplastie prothétique de hanche , Nanotubes de carbone , Animaux , Matériaux biocompatibles , Friction , Test de matériaux , Souris , RatsRÉSUMÉ
For gas metal arc welding (GMAW), increasing the welding current is the most effective way to improve welding efficiency. However, much higher current decreases the welding quality as a result of metal rotating-spray transfer phenomena in the high-current GMAW process. In this work, the external axial magnetic field (EAMF) was applied to the high-current GMAW process to control the metal transfer and decrease the welding spatters. A unified arc-droplet coupled model for high-current GMAW using EAMFs was built to investigate the metal rotating-spray transfer behavior. The temperature fields, flow fields in the arc, and droplet were revealed. Considering all the heat transferred to the molten metal, the Joule heat was found to be the dominant factor affecting the droplet temperature rise, followed by the anode heat. The conductive heat from the arc contributed less than half the value of the other two. Considering the EAMFs of different alternating frequencies, the arc constricting effects and controlled metal transfer behaviors are discussed. The calculated results agree well with the experimental high-speed camera observations.
RÉSUMÉ
Carbon nanotubes (CNTs) are cylindrical tubular nanomaterials made of carbon with excellent electrical conductivity, thermal conductivity, and mechanical strength. The material is applied to improve performance in various industrial products. CNTs have been widely researched and developed as biomaterials that can offer high function, performance, and durability in orthopedic applications. However, the use of CNTs as biomaterials must be administered with caution, as the fibrous nanomaterial may be carcinogenic due to its similar size and shape to asbestos. In this review article, we examine the potential clinical application of CNTs in orthopedic surgery. We first provide an overview of biocompatibility and carcinogenicity studies of CNTs with a focus on their effects on the bone, joint, and respiratory system. Furthermore, we introduce CNT-based biomaterials for orthopedic applications that have been reported in the literature, including scaffolds for bone and cartilage regeneration, composites that enhance the performance of biomaterials, CNT coatings, and devices for treating musculoskeletal tumors.