Intrinsically Stretchable Organic Thermoelectric Polymers Enabled by Incorporating Fused-Ring Conjugated Breakers.

While research on organic thermoelectric polymers is making significant progress in recent years, realization of a single polymer material possessing both thermoelectric properties and stretchability for the next generation of self-powered wearable electronics is a challenging task and remains an area yet to be explored. A new molecular engineering concept of "conjugated breaker" is employed to impart stretchability to a highly crystalline diketopyrrolepyrrole (DPP)-based polymer. A hexacyclic diindenothieno[2,3-b]thiophene (DITT) unit, with two 4-octyloxyphenyl groups substituted at the tetrahedral sp3-carbon bridges, is selected to function as the conjugated breaker that can sterically hinder intermolecular packing to reduce polymers' crystallinity. A series of donor-acceptor random copolymers is thus developed via polymerizing the crystalline DPP units with the DITT conjugated breakers. By controlling the monomeric DPP/DITT ratios, DITT30 reaches the optimal balance of crystalline/amorphous regions, exhibiting an exceptional power factor (PF) value up to 12.5 µW m-1 K-2 after FeCl3-doping; while, simultaneously displaying the capability to withstand strains exceeding 100%. More significantly, the doped DITT30 film possesses excellent mechanical endurance, retaining 80% of its initial PF value after 200 cycles of stretching/releasing at a strain of 50%. This research marks a pioneering achievement in creating intrinsically stretchable polymers with exceptional thermoelectric properties.

A pH-Sensitive Stretchable Zwitterionic Hydrogel with Bipolar Thermoelectricity.

Amid growing interest in using body heat for electricity in wearables, creating stretchable devices poses a major challenge. Herein, a hydrogel composed of two core constituents, namely the negatively-charged 2-acrylamido-2-methylpropanesulfonic acid and the zwitterionic (ZI) sulfobetaine acrylamide, is engineered into a double-network hydrogel. This results in a significant enhancement in mechanical properties, with tensile stress and strain of up to 470.3 kPa and 106.6%, respectively. Moreover, the ZI nature of the polymer enables the fabrication of a device with polar thermoelectric properties by modulating the pH. Thus, the ionic Seebeck coefficient (Si) of the ZI hydrogel ranges from -32.6 to 31.7 mV K-1 as the pH is varied from 1 to 14, giving substantial figure of merit (ZTi) values of 3.8 and 3.6, respectively. Moreover, a prototype stretchable ionic thermoelectric supercapacitor incorporating the ZI hydrogel exhibits notable power densities of 1.8 and 0.9 mW m-2 at pH 1 and 14, respectively. Thus, the present work paves the way for the utilization of pH-sensitive, stretchable ZI hydrogels for thermoelectric applications, with a specific focus on harvesting low-grade waste heat within the temperature range of 25-40 °C.

Enhanced Electrical Conductivity and Mechanical Properties of Stretchable Thermoelectric Generators Formed by Doped Semiconducting Polymer/Elastomer Blends.

Recent research efforts have concentrated on the development of flexible and stretchable thermoelectric (TE) materials. However, significant challenges have emerged, including increased resistance and reduced electrical conductivity when subjected to strain. To address these issues, rigid semiconducting polymers and elastic insulating polymers have been incorporated and nanoconfinement effects have been exploited to enhance the charge mobility. Herein, a feasible approach is presented for fabricating stretchable TE materials by using a doped semiconducting polymer blend consisting of either poly(3-hexylthiophene) (P3HT) or poly(3,6-dithiophen-2-yl-2,5-di(2-decyltetradecyl)-pyrrolo[3,4-c]pyrrole-1,4-dione-alt-thienylenevinylene-2,5-yl) (PDVT-10) as the rigid polymer with styrene-ethylene-butylene-styrene (SEBS) as the elastic polymer. In particular, the blend composition is optimized to achieve a continuous network structure with SEBS, thereby improving the stretchability. The optimized polymer films exhibit well-ordered microstructural aggregates, indicative of good miscibility with FeCl3 and enhanced doping efficiency. Notably, a lower activation energy and higher charge-carrier concentration contribute to an improved electrical conductivity under high tensile strain, with a maximum output power of 1.39 nW at a ΔT of 22.4 K. These findings offer valuable insights and serve as guidelines for the development of stretchable p-n junction thermoelectric generators based on doped semiconducting polymer blends with potential applications in wearable electronics and energy harvesting.

Synergistic Interactions in Sequential Process Doping of Polymer/Single-Walled Carbon Nanotube Nanocomposites for Enhanced n-Type Thermoelectric Performance.

This study focuses on the fabrication of nanocomposite thermoelectric devices by blending either a naphthalene-diimide (NDI)-based conjugated polymer (NDI-T1 or NDI-T2), or an isoindigo (IID)-based conjugated polymer (IID-T2), with single-walled carbon nanotubes (SWCNTs). This is followed by sequential process doping method with the small molecule 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) to provide the nanocomposite with n-type thermoelectric properties. Experiments in which the concentrations of the N-DMBI dopant are varied demonstrate the successful conversion of all three polymer/SWCNT nanocomposites from p-type to n-type behavior. Comprehensive spectroscopic, microstructural, and morphological analyses of the pristine polymers and the various N-DMBI-doped polymer/SWCNT nanocomposites are performed in order to gain insights into the effects of various interactions between the polymers and SWCNTs on the doping outcomes. Among the obtained nanocomposites, the NDI-T1/SWCNT exhibits the highest n-type Seebeck coefficient and power factor of -57.7 µV K-1 and 240.6 µW m-1 K-2 , respectively. However, because the undoped NDI-T2/SWCNT exhibits a slightly higher p-type performance, an integral p-n thermoelectric generator is fabricated using the doped and undoped NDI-T2/SWCNT nanocomposite. This device is shown to provide an output power of 27.2 nW at a temperature difference of 20 K.

Tunable Thermoelectric Performance of the Nanocomposites Formed by Diketopyrrolopyrrole/Isoindigo-Based Donor-Acceptor Random Conjugated Copolymers and Carbon Nanotubes.

This paper presents the development of thermoelectric properties in nanocomposites comprising donor-acceptor random conjugated copolymers and single-walled carbon nanotubes (SWCNTs). The composition of the conjugated polymers, specifically the ratio of diketopyrrolopyrrole (DPP) to isoindigo (IID), is manipulated to design a series of random conjugated copolymers (DPP0, DPP5, DPP10, DPP30, DPP50, DPP90, DPP95, and DPP100). The objective is to improve the dispersion of SWCNTs into smaller bundles, leading to enhanced thermoelectric properties of the polymer/SWCNT nanocomposite. This dispersion strategy promotes an interconnected conducting network, which plays a critical role in optimizing the thermoelectric performance. Accordingly, the effects of morphologies on the thermoelectric properties of the nanocomposites are systematically investigated. The DPP95/SWCNT nanocomposite exhibits the strongest interaction, resulting in the highest power factor (PF) of 711.1 µW m-1 K-2, derived from the high electrical conductivity of 1690 S cm-1 and Seebeck coefficient of 64.8 µV K-1. The prototype flexible thermoelectric generators assembled with a DPP95/SWCNT film achieve a maximum power output of 20.4 µW m-2 at a temperature difference of 29.3 K. These findings highlight the potential of manipulating the composition of random conjugated copolymers and incorporating SWCNTs to efficiently harvest low-grade waste heat in wearable thermoelectric devices.

Mixed Ionic-Electronic Conducting Hydrogels with Carboxylated Carbon Nanotubes for High Performance Wearable Thermoelectric Harvesters.

Mixed ionic-electronic conducting (MIEC) thermoelectric (TE) materials offer higher ionic conductivity and ionic Seebeck coefficient compared to those of purely ionic-conducting TE materials. These characteristics make them suitable for direct use in thermoelectric generators (TEGs) as the charge carriers can be effectively transported from one electrode to the other via the external circuit. In the present study, MIEC hydrogels are fabricated via the chemical cross-linking of polyacrylamide (PAAM) and polydopamine (PDA) to form a double network. In addition, electrically conducting carboxylated carbon nanotubes (CNT-COOH) are dispersed evenly within the hydrogel via sonication and interaction with the PDA. Moreover, the electrical properties of the hydrogel are further improved via the in situ polymerization of polyaniline (PANI). The presence of CNT-COOH facilitates the ionic conductivity and enhances the ionic Seebeck coefficient via ionic-electronic interactions between sodium ions and carboxyl groups on CNT-COOH, which can be observed in X-ray photoelectron spectroscopy results, thereby promoting the charge transport properties. As a result, the optimum device exhibits a remarkable ionic conductivity of 175.3 mS cm-1 and a high ionic Seebeck coefficient of 18.6 mV K-1, giving an ionic power factor (PFi) of 6.06 mW m-1 K-2 with a correspondingly impressive ionic figure of merit (ZTi) of 2.65. These values represent significant achievements within the field of gel-state organic TE materials. Finally, a wearable module is fabricated by embedding the PAAM/PDA/CNT-COOH/PANI hydrogel into a poly(dimethylsiloxane) mold. This configuration yields a high power density of 171.4 mW m-2, thus highlighting the considerable potential for manufacturing TEGs for wearable devices capable of harnessing waste heat.

N-Type Doping of Naphthalenediimide-Based Random Donor-Acceptor Copolymers to Enhance Transistor Performance and Structural Crystallinity.

An integrated strategy of molecular design and conjugated polymer doping is proposed to improve the electronic characteristics for organic field effect transistor (OFET) applications. Here, a series of soluble naphthalene diimide (NDI)-based random donor-acceptor copolymers with selenophene π-conjugated linkers and four acceptors with different electron-withdrawing strengths (named as rNDI-N/S/NN/SS) are synthesized, characterized, and used for OFETs. N-type doping of NDI-based random copolymers using (12a,18a)-5,6,12,12a,13,18,18a,19-octahydro-5,6-dimethyl-13,18[1',2']-benzenobisbenzimidazo[1,2-b:2',1'-d]benzo[i][2.5]benzodiazocine potassium triflate adduct (DMBI-BDZC) is successfully demonstrated. The undoped rNDI-N, rNDI-NN, and rNDI-SS samples exhibit ambipolar charge transport, while rNDI-S presents only a unipolar n-type characteristic. Doping with DMBI-BDZC significantly modulates the performance of rNDI-N/S OFETs, with a 3- to 6-fold increase in electron mobility (µe) for 1 wt % doped device due to simultaneous trap mitigation, lower contact resistance (RC), and activation energy (EA), and enhanced crystallinity and edge-on orientation for charge transport. However, the doping of intrinsic pro-quinoidal rNDI-NN/SS films exhibits unchanged or even reduced device performance. These findings allow us to manipulate the energy levels by developing conjugated copolymers based on various acceptors and quinoids and to optimize the dopant-polymer semiconductor interactions and their impacts on the film morphology and molecular orientation for enhanced charge transport.

Solution-Processed Isoindigo- and Thienoisoindigo-Based Donor-Acceptor-Donor π-Conjugated Small Molecules: Synthesis, Morphology, Molecular Packing, and Field-Effect Transistor Characterization.

Molecular design and precise control of thin-film morphology and crystallinity of solution-processed small molecules are important for enhancing charge transport mobility of organic field-effect transistors and gaining more insight into the structure-property relationship. Here, two donor-acceptor-donor (D-A-D) architecture small molecules TRA-IID-TRA and TRA-TIID-TRA comprising an electron-donating triarylamine (TRA) and two different electron-withdrawing cores, isoindigo (IID) and thienoisoindigo (TIID), respectively, were synthesized and characterized. Replacing the phenylene rings of central IID A with thiophene gives a TIID core, which reduces the optical band gap and upshifts the energy levels of frontier molecular orbitals. The single-crystal structures and grazing-incidence wide-angle X-ray scattering (GIWAXS) analysis revealed that TRA-TIID-TRA exhibits the relatively tighter π-π stacking packing with preferential edge-on orientation, larger coherence length, and higher crystallinity due to the noncovalent S···O/S···π intermolecular interactions. The distinctly oriented and connected ribbon-like TRA-TIID-TRA crystalline film by the solution-shearing process achieved a superior hole mobility of 0.89 cm2 V-1 s-1 in the organic field-effect transistor (OFET) device, which is at least five times higher than that (0.17 cm2 V-1 s-1) of TRA-IID-TRA with clear cracks. Eventually, rational modulation of fused core in the π-conjugated D-A-D small molecule provides a new understanding of structural design for enhancing the performance of solution-processed organic semiconductors.

Photoelectric effect of hybrid ultraviolet-sensitized phototransistors from an n-type organic semiconductor and an all-inorganic perovskite quantum dot photosensitizer.

Low-dimensional all-inorganic perovskite quantum dots (QDs) have been increasingly developed as photo-sensing materials in the field of photodetectors because of their strong light-absorption capability and broad bandgap tunability. Here, solution-processed hybrid phototransistors built by a dithienothiophenoquinoid (DTTQ) n-type organic semiconductor transport channel mixing with a colloidal CsPbBr3 perovskite QD photosensitizer are demonstrated by manipulating the relative volume ratio from 10 : 0 to 9 : 1, 7 : 3, 5 : 5, 3 : 7, 1 : 9, and 0 : 10. This results in a significantly enhanced photodetection performance owing to the advantages of a high UV absorption cross-section based on the perovskite QDs, efficient carrier transport abilities from the DTTQ semiconductor, and the photogating effect between the bulk heterojunction photocarrier transfer interfaces. The optimized DTTQ : QD (3 : 7) hybrid phototransistor achieves a high photoresponsivity (R) of 7.1 × 105 A W-1, a photosensitivity (S) of 1.8 × 104, and a photodetectivity (D) of 3.6 × 1013 Jones at 365 nm. Such a solution-based fabrication process using a hybrid approach directly integrated into a sensitized phototransistor potentially holds promising photoelectric applications towards advanced light-stimulated photodetection.

Controlled Synthesis of Poly[(3-alkylthio)thiophene]s and Their Application to Organic Field-Effect Transistors.

Regioregular polythiophenes have been widely used in organic electronic applications due to their solution processability with chemical modification through side chain engineering, as well as their microstructural organization and good hole transport properties. Here, we introduce alkylthio side chains, (poly[(3-alkylthio)thiophene]s; P3ATTs), with strong noncovalent sulfur molecular interactions, to main chain thienyl backbones. These P3ATTs were compared with alkyl-substituted polythiophene (poly(3-alkylthiophene); P3AT) variants such that the effects of straight (hexyl and decyl) and branched (2-ethylhexyl) side chains (with and without S atoms) on their thin-film morphologies and crystalline states could be investigated. P3ATTs with linear alkylthio side chains (P3HTT, hexylthio; P3DTT, decylthio) did not attain the expected higher organic field-effect transistor (OFET) mobilities with respect to P3HT (hexyl) and P3DT (decyl) mainly due to their lower regioregularity (76-78%), although P3ATTs exhibit an enhanced tendency for aggregation and compact molecular packing, as indicated by the red-shifting of the absorption spectra and the shortening of the π-π stacking distance, respectively. Moreover, the loss of regioregularity issue can be solved by introducing more soluble 2-ethylhexylthio branched side chains to form poly[3-(2-ethylhexylthio)thiophene] (P3EHTT), which provides enhanced crystallinity and efficient charge mobility (increased by up to a factor of 3) with respect to the poly(2-ethylhexylthiophene) (P3EHT) without S atoms in the side moieties. This study demonstrates that the presence of side chain alkylthio structural motifs with nonbonded interactions in polythiophene semiconductors has a beneficial impact on the molecular conformation, morphologies, structural packing, and charge transport in OFET devices.

Additive-induced ordered structures formed by PC71BM fullerene derivatives.

We report the results of an experimental and theoretical study of structure formation in mixtures of phenyl-C71-butyric acid methyl ester (PC71BM) with high boiling octane based solvent additives 1,8-octanedithiol (ODT), 1,8-dibromooctane, and 1,8-diiodooctane obtained by evaporation of a host-solvent (chlorobenzene). Experimental studies by DSC, SAXS and WAXS methods found evidence of crystallization of fullerenes in the presence of the high boiling additives in the mixtures. A molecular dynamics simulation of a PC71BM/ODT mixture revealed the self-assembly of fullerenes into sponge-like network structures.

A Solution Processable Dithioalkyl Dithienothiophene (DSDTT) Based Small Molecule and Its Blends for High Performance Organic Field Effect Transistors.

The 3,5-dithiooctyl dithienothiophene based small molecular semiconductor DDTT-DSDTT (1), end functionalized with fused dithienothiophene (DTT) units, was synthesized and characterized for organic field effect transistors (OFET). The thermal, optical, electrochemical, and computed electronic structural properties of 1 were investigated and contrasted. The single crystal structure of 1 reveals the presence of intramolecular locks between S(alkyl)···S(thiophene), with a very short S-S distance of 3.10 Å, and a planar core. When measured in an OFET device compound 1 exhibits a hole mobility of 3.19 cm2 V-1 s-1, when the semiconductor layer is processed by a solution-shearing deposition method and using environmentally acceptable anisole as the solvent. This is the highest value reported to date for an all-thiophene based molecular semiconductor. In addition, solution-processed small molecule/insulating polymer (1/PαMS) blend films and devices were investigated. Morphological analysis reveals a nanoscopic vertical phase separation with the PαMS layer preferentially contacting the dielectric and 1 located on top of the stack. The OFET based on the blend comprising 50% weight of 1 exhibits a hole mobility of 2.44 cm2 V-1 s-1 and a very smaller threshold voltage shift under gate bias stress.

Solution-Processable Quinoidal Dithioalkylterthiophene-Based Small Molecules Pseudo-Pentathienoacenes via an Intramolecular S···S Lock for High-Performance n-Type Organic Field-Effect Transistors.

A new organic small-molecule family comprising tetracyanoquinodimethane-substituted quinoidal dithioalky(SR)terthiophenes (DSTQs) (DSTQ-6 (1); SR = SC6H13, DSTQ-10 (2); SR = SC10H21, DSTQ-14 (3); SR = SC10H21) was synthesized and contrasted with a nonthioalkylated analogue (DRTQ-14 (4); R = C14H29). The physical, electrochemical, and electrical properties of these new compounds are thoroughly investigated. Optimized geometries obtained from density functional theory calculations and single-crystal X-ray diffraction reveal the planarity of the SR-containing DSTQ core. DSTQs pack in a slipped π-π stacked two-dimensional arrangement, with a short intermolecular stacking distance of 3.55 Å and short intermolecular S···N contacts of 3.56 Å. Thin-film morphological analysis by grazing incident X-ray diffraction reveals that all DSTQ molecules are packed in an edge-on fashion on the substrate. The favorable molecular packing, the high core planarity, and very low lowest unoccupied molecular orbital (LUMO) energy level (-4.2 eV) suggest that DSTQs could be electron-transporting semiconductors. Organic field-effect transistors based on solution-sheared DSTQ-14 exhibit the highest electron mobility of 0.77 cm2 V-1 s-1 with good ambient stability, which is the highest value reported to date for such a solution process terthiophene-based small molecular semiconductor. These results demonstrate that the device performance of solution-sheared DSTQs can be improved by side chain engineering.

Correlations between temperature-dependent rheology and electrostatic interactions in reverse wormlike micelles induced by inorganic salts.

Previous studies have shown that the plateau modulus Gp of the wormlike micelles formed in water driven by hydrophobic interactions is a constant upon heating, similar to polymer solutions, and Gp of the reverse worms formed in oils driven by hydrogen bonding decreases with increasing temperature. In this work, we investigated the reverse worms induced by three chloride salts that bind lecithin through different strengths of electrostatic interactions, in the order of LaCl3 > CaCl2 > LiCl. We correlated the interaction strengths with the temperature-dependent rheological properties and found that upon heating, Gp for all the reverse worms driven by electrostatic interactions decays slower than that driven by the weak temperature-sensitive hydrogen bonding. Furthermore, the decay rates of Gp follow an order in the inverse relation to the interaction strength, LaCl3≤ CaCl2 < LiCl, indicating that the dependence of Gp on temperature can reflect the strength of the driving forces for micellization. We utilized Fourier transform infrared spectroscopy (FTIR) to confirm the weakening of the interaction and the small angle X-ray scattering (SAXS) technique to reveal the decrease in the lengths of the reverse worms as temperature increases, both of which echo the changes in the rheological properties.

Facile Fabrication of Stretchable Touch-Responsive Perovskite Light-Emitting Diodes Using Robust Stretchable Composite Electrodes.

Perovskite light-emitting diode (PeLED) has been vigorously developed in recent years. As it has demonstrated good performance on the rigid substrates, the next important direction of PeLED is its integration with stretchable components to realize stretchable, responsive device. Here, we describe a facile fabrication of stretchable perovskite light-emissive touch-responsive devices (PeLETDs) by utilizing highly transparent and conductive polyurethane/silver nanowires (PU/AgNWs) as the electrode. Meanwhile, a stretchable tricomposite perovskite emissive layer was developed by blending a small amount of poly(ethylene oxide) (PEO) and poly(vinylpyrrolidone) (PVP) with CsPbBr3. Additionally, a thin PVP layer was introduced at the bottom of the emissive layer. On one hand, it can further improve the morphology of the emissive layer; on the other hand, it can serve as an electron-injection barrier to reduce the high nonradiative recombination at the corresponding interface. Further, to fulfill the responsive function of the fabricated PeLEDs, a poly(ethylene terephthalate) (PET) spacer with a 100 µm thickness was inserted between the top electrode and the emissive layer. A stretchable PeLETD is finally demonstrated to possess a low turn-on voltage of 2 V with a brightness of 380.5 cd m-2 at 7.5 V and can sustain 30% uniaxial strain with a small luminance variation of 24%. More interestingly, our stretchable PeLETD exhibited high stability, which could be well touch responsivity, where the luminance is on/off switched for 300 cycles by repeatedly applying pressure.

Light Down-Converter Based on Luminescent Nanofibers from the Blending of Conjugated Rod-Coil Block Copolymers and Perovskite through Electrospinning.

We demonstrated a novel strategy for the preparation of light down-converter by combining rod-coil block copolymers with perovskite quantum dots (QDs) through electrospinning. Reports have shown that polymer deformability can be enhanced by incorporating a soft segment and controlled by varying the rod/coil ratio. Therefore, we first synthesized the rod-coil block copolymer through the click reaction of polyfluorene (PF) and poly(n-butyl acrylate) (PBA). Next, the CsPbBr3@PF8k-b-PBA12k composite fibers were fabricated by blending perovskite through electrospinning. Optical spectral evidence demonstrated the success of the strategy, as light down-converters were prepared through the controlled variance of QD/polymer ratios to achieve tunable color and stretchability. This result reveals the potential of using rod-coil block copolymers to fabricate color-tunable perovskite light down-converters.

Thienoisoindigo (TII)-Based Quinoidal Small Molecules for High-Performance n-Type Organic Field Effect Transistors.

A novel quinoidal thienoisoindigo (TII)-containing small molecule family with dicyanomethylene end-capping units and various alkyl chains is synthesized as n-type organic small molecules for solution-processable organic field effect transistors (OFETs). The molecular structure of the 2-hexyldecyl substituted derivative, TIIQ-b16, is determined via single-crystal X-ray diffraction and shows that the TIIQ core is planar and exhibits molecular layers stacked in a "face-to-face" arrangement with short core intermolecular distances of 3.28 Å. The very planar core structure, shortest intermolecular N···H distance (2.52 Å), existence of an intramolecular non-bonded contact between sulfur and oxygen atom (S···O) of 2.80 Å, and a very low-lying LUMO energy level of -4.16 eV suggest that TIIQ molecules should be electron transporting semiconductors. The physical, thermal, and electrochemical properties as well as OFET performance and thin film morphologies of these new TIIQs are systematically studied. Thus, air-processed TIIQ-b16 OFETs exhibit an electron mobility up to 2.54 cm2 V-1 s-1 with a current ON/OFF ratio of 105-106, which is the first demonstration of TII-based small molecules exhibiting unipolar electron transport characteristics and enhanced ambient stability. These results indicate that construction of quinoidal molecule from TII moiety is a successful approach to enhance n-type charge transport characteristics.

Oligo(ethylene glycol) side chain effect on the physical properties and molecular arrangement of oligothiophene-isoindigo based conjugated polymers.

Oligo(ethylene glycol) (OEG) side chains are widely used in donor-acceptor conjugated polymers (D-A CPs) and enable the polymers to dissolve and be processed in environmentally friendly and cost-effective nonchlorinated solvents, such as water. However, the OEG effect on the physical properties of D-A CPs has not been thoroughly studied and sometimes the results are controversial. In this study, two oligothiophene-isoindigo based conjugated polymers, P3TI and P4TI, are selected as model polymers to investigate the OEG effect. PnTI has octyl side chains on the oligothiophene unit and 2-hexyldecyl side chains on the isoindigo unit. The replacement of an alkyl side chain with OEG not only changes the optical and thermal properties but also the molecular arrangements of the polymers such as π-π d-spacing, crystallinity, and packing orientation. The domination of the crystallization behavior changes from the oligothiophene unit to the isoindigo unit when the bulky alkyl group is replaced by the flexible and linear OEG. The packing changes from edge-on to face-on orientation. The results are intriguing and provide new insights into this class of polymers.

Facile 3D Boron Nitride Integrated Electrospun Nanofibrous Membranes for Purging Organic Pollutants.

Elegant integration of three-dimensional (3D) boron nitride (BN) into the porous structure of a polymer nanofiber (NF) membrane system results in a surface with enhanced absorption capacity for removal. Various BN-based applications were designed and developed successfully, but BN-based absorption systems remain relatively unexplored. To develop a reusable absorption strategy with high removal efficiency, we used a composite of 3D BN and polyacrylonitrile (PAN) to prepare a NF membrane with a porous structure by using electrospinning and spray techniques (BN-PAN ES NFs). The removal efficiency of the 3D BN NF membrane was higher than that of a pure carbon NF membrane. Water pollutants, such as the dyes Congo red (CR), basic yellow 1 (BY), and rhodamine B (Rh B), were tested, and the absorption ratios were 46%, 53%, and 45%, respectively. Furthermore, the aforementioned dyes and pollutants can be completely eliminated and removed from water by heating because of the high heat resistance of 3D BN. The membrane can be recycled and reused at least 10 times. These results indicate that BN-PAN ES NFs have can be used in water purification and treatment for absorption applications, and that they can be reused after heat treatment.

Tunable Phospholipid Nanopatterns Mediated by Cholesterol with Sub-3 nm Domain Size.

The interactions between phospholipids and cholesterol have been extensively studied in the aqueous systems because of their vital functionalities in the cell membrane. In this study, instead of the self-assembly in water, we explored the microphase-separated structures of phospholipids in bulk and thin films in the absence of solvents and created a series of ordered nanostructures by incorporation of cholesterol into phospholipids. Three zwitterionic two-tailed phospholipids, that is, phosphatidylcholines (PCs), with different numbers of double bonds on the hydrocarbon tails were investigated, including egg PC, 1,2-dioleoyl- sn-glycero-3-phosphocholine (DOPC), and 1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DPPC). We find that the nanostructures are highly dependent on the conformation of the tails on the PCs, which can be tailored by the number of double bonds on tails and the molar ratio of cholesterol to PC. By changing the molar ratio, egg PC with one double bond organizes into rich microdomains, including lamellae, spheres, and cylinders, whereas DOPC with two double bonds form spheres and cylinders and DPPC with no double bond forms lamellae only. The sizes of the microdomains are less than 3 nm, smaller than those of typical block copolymers. The biomolecule-based nanopatterns developed in this work provide a platform toward future applications of nanotechnology and biotechnology.