RÉSUMÉ
This study investigates the environmental impact of burning herbicide-contaminated biomass, focusing on atrazine (ATZ) and diuron (DIU) sprayed on rice straw prior to burning. Samples of soil, biomass residues, total suspended particulate (TSP), particulate matter with an aerodynamic diameter ≤ 10 µm (PM10), and aerosols were collected and analyzed. Soil analysis before and after burning contaminated biomass showed significant changes, with 2,4-dichlorophenoxyacetic acid (2,4-D) initially constituting 79.2% and decreasing by 3.3 times post-burning. Atrazine-desethyl, sebuthylazine, and terbuthylazine were detected post-burning. In raw rice straw biomass, terbuthylazine dominated at 80.0%, but burning ATZ-contaminated biomass led to the detection of atrazine-desethyl and notable increases in sebuthylazine and terbuthylazine. Conversely, burning DIU-contaminated biomass resulted in a shift to 2,4-D dominance. Analysis of atmospheric components showed changes in TSP, PM10, and aerosol samples. Linuron in ambient TSP decreased by 1.6 times after burning ATZ-contaminated biomass, while atrazine increased by 2.9 times. Carcinogenic polycyclic aromatic hydrocarbons (PAHs), including benzo[a]anthracene (BaA), benzo[a]pyrene (BaP), and benzo[b]fluoranthene (BbF), increased by approximately 9.9 to 13.9 times after burning ATZ-contaminated biomass. In PM10, BaA and BaP concentrations increased by approximately 11.4 and 19.0 times, respectively, after burning ATZ-contaminated biomass. This study sheds light on the environmental risks posed by burning herbicide-contaminated biomass, emphasizing the need for sustainable agricultural practices and effective waste management. The findings underscore the importance of regulatory measures to mitigate environmental contamination and protect human health.
Sujet(s)
Atrazine , Biomasse , Diuron , Herbicides , Oryza , Sol , Atrazine/analyse , Oryza/composition chimique , Herbicides/analyse , Sol/composition chimique , Diuron/analyse , Polluants du sol/analyse , Polluants atmosphériques/analyse , Surveillance de l'environnement , Matière particulaire/analyseRÉSUMÉ
This study delved into the impact of open biomass burning on the distribution of pesticide and polycyclic aromatic hydrocarbon (PAH) residues across soil, rice straw, total suspended particulates (TSP), particulate matter with aerodynamic diameter ≤ 10 µm (PM10), and aerosols. A combination of herbicides atrazine (ATZ) and diuron (DIU), fungicide carbendazim (CBD), and insecticide chlorpyriphos (CPF) was applied to biomass before burning. Post-burning, the primary soil pesticide shifted from propyzamide (67.6%) to chlorpyriphos (94.8%). Raw straw biomass retained residues from all pesticide groups, with chlorpyriphos notably dominating (79.7%). Ash residue analysis unveiled significant alterations, with elevated concentrations of chlorpyriphos and terbuthylazine, alongside the emergence of atrazine-desethyl and triadimenol. Pre-burning TSP analysis identified 15 pesticides, with linuron as the primary compound (51.8%). Post-burning, all 21 pesticides were detected, showing significant increases in metobromuron, atrazine-desethyl, and cyanazine concentrations. PM10 composition mirrored TSP but exhibited additional compounds and heightened concentrations, particularly for atrazine, linuron, and cyanazine. Aerosol analysis post-burning indicated a substantial 39.2-fold increase in atrazine concentration, accompanied by the presence of sebuthylazine, formothion, and propyzamide. Carcinogenic PAHs exhibited noteworthy post-burning increases, contributing around 90.1 and 86.9% of all detected PAHs in TSP and PM10, respectively. These insights advance understanding of pesticide dynamics in burning processes, crucial for implementing sustainable agricultural practices and safeguarding environmental and human health.
RÉSUMÉ
The escalating utilization of pesticides has led to pronounced environmental contamination, posing a significant threat to agroecosystems. The extensive and persistent global application of these chemicals has been linked to a spectrum of acute and chronic human health concerns. This review paper focuses on the concentrations of airborne pesticides in both indoor and outdoor environments. The collection of diverse pesticide compounds from the atmosphere is examined, with a particular emphasis on active and passive air sampling techniques. Furthermore, a critical evaluation is conducted on the methodologies employed for the extraction and subsequent quantification of airborne pesticides. This analysis takes into consideration the complexities involved in ensuring accurate measurements, highlighting the advancements and limitations of current practices. By synthesizing these aspects, this review aims to foster a more comprehensive and informed comprehension of the intricate dynamics related to the presence and measurement of airborne pesticides. This, in turn, is poised to significantly contribute to the refinement of environmental monitoring strategies and the augmentation of precise risk assessments.
RÉSUMÉ
This critical review examines the release of pesticides from agricultural practices into the air, with a focus on volatilization, and the factors influencing their dispersion. The review delves into the effects of airborne pesticides on human health and their contribution to anthropogenic air pollution. It highlights the necessity of interdisciplinary research encompassing science, technology, public policy, and agricultural practices to effectively mitigate the risks associated with pesticide volatilization and spray dispersion. The text acknowledges the need for more research to understand the fate and transport of airborne pesticides, develop innovative application technologies, improve predictive modeling and risk assessment, and adopt sustainable pest management strategies. Robust policies and regulations, supported by education, training, research, and development, are crucial to ensuring the safe and sustainable use of pesticides for human health and the environment. By providing valuable insights, this review aids researchers and practitioners in devising effective and sustainable solutions for safeguarding human health and the environment from the hazards of airborne pesticides.
RÉSUMÉ
Plantain flour (PLF) and soy flour (SF) were used to substitute wheat flour (10% and 20% w/w) in composite bread. Physicochemical, phytochemical, and sensory properties were investigated. Partial substitution by PLF significantly increased (p < .05) starch, amylose, ascorbic acid, and potassium content in bread samples. In contrast, a significant improvement (p < .05) in protein, fat, amylopectin, and calcium content was observed with SF substitution. Composite bread with PLF and SF together lowered the hydrolysis index (HI) and glycemic index (GI) as compared with whole wheat flour. The molar phytate to minerals (iron, zinc, and calcium) ratio in all composite loaves was lower than reported critical values, except for phytate to iron. Significant differences (p < .05) were found in color, specific volume, and texture characteristics of loaves made from partial substitution with PLF and SF. Sensory evaluation revealed that bread with 10% PLF exhibited better scores for appearance and willingness to pay than the control. In contrast, SF negatively affected (p < .05) the appearance, texture, color, overall acceptance, and willingness to pay. The trade-off analysis indicated that PLF can be utilized to produce bread that meets consumers' demands, while incorporating SF as an alternative high-nutrient density bread will be beneficial to health.
RÉSUMÉ
Pesticides have been frequently used in agricultural fields. Due to the expeditious utilization of pesticides, their excessive usage has negative impacts on the natural environment and human health. This review discusses the successful implications of nanotechnology-based photocatalysis for the removal of environmental pesticide contaminants. Notably, various nanomaterials, including TiO2, ZnO, Fe2O3, nanoscale zero-valent iron, nanocomposite-based materials, have been proposed and have played a progressively essential role in wastewater treatment. In addition, a detailed review of the crucial reaction condition factors, including water matrix, pH, light source, temperature, flow rate (retention time), initial concentration of pesticides, a dosage of photocatalyst, and radical scavengers, is also highlighted. Additionally, the degradation pathway of pesticide mineralization is also elucidated. Finally, the challenges of technologies and the future of nanotechnology-based photocatalysis toward the photo-degradation of pesticides are thoroughly discussed. It is expected that those innovative extraordinary photocatalysts will significantly enhance the performance of pesticides degradation in the coming years.
Sujet(s)
Pesticides , Purification de l'eau , Catalyse , Humains , Fer , Nanotechnologie , EauRÉSUMÉ
In response to growing food demand, edible insects are perceived as an opportunity to alleviate food insecurity. With its wide edible insects' biodiversity, the Democratic Republic of Congo is one of Africa's most critical entomophagous. This study aimed at giving a first insight on inventory showing diversity, perception, consumption, availability, host plants, harvesting techniques and processing techniques of edible insects in South-Kivu, DRC. It recorded twenty-three edible insects belonging to nine families and five orders, some of which are consumed in the larval, adult, egg and pupa stages. Rhyncophorus phoenicis, Alphitobius diaperinus, Macrotermes subhyalinus and Acheta domesticus were the most preferred edible insects in Fizi Territory, Ruspolia differens and Apis mellifera larvae in Kabare Territory, Imbrasia oyemensis, Imbrasia epimethea, Rhynchophorus ferrugineus and Rhyncophorus phoenicis in Mwenga Territory, Ruspolia differens, Macrotermes subhyalinus, Gryllotalpa africana, Nsike, Nomadacris septemfasciata and A. mellifera larvae in Walungu Territory. Ruspolia differens, I. oyemensis, A. mellifera larvae, G. africana and Nsike, were preferred for their taste. Acheta domesticus, A. diaperinus and A. mellifera larvae were abundant throughout the year, while others were only available for 9 months or less per year. Numerous plants have been recorded as their hosts, including plants used for food and income. Harvesting strategies and period, processing methods and preservation techniques depend on insect species, local knowledge and practices. These findings suggest similar and thorough studies on entomophagy across the country while encouraging the rearing of edible insects to address their existing high demand and environmental concerns.
Sujet(s)
Insectes comestibles , AnimauxRÉSUMÉ
The effect of cultivar, ripening stage, and pre-treatment method were investigated on the nutritional, physicochemical, and pasting properties of plantain flours from two plantains and two plantain hybrids. There were significant variations (p < 0.05) in chemical composition and physical properties influenced by the interaction of cultivars, ripening stages, and pre-treatment methods. The highest levels of amylose, water-holding capacity (WHC), and oil-holding capacity (OHC) were observed in unripe flours and acid-treated flour recorded the highest content of resistant starch (RS). Flour after pre-blanching contained the highest level of total phenolic (TP), carotenoid contents, and browning index (BI) value. In contrast, acid-treated flours had the lowest BI value. As ripening progressed, peak viscosity and breakdown values increased but final viscosity, setback, and pasting temperature values were reduced. Untreated flour samples showed the highest peak viscosity. Higher breakdown values were found in acid-treated samples and higher setback values in pre-blanched samples.
RÉSUMÉ
Plantain is a key staple food in Central and West Africa, but there is limited understanding of its market in Africa. In addition, the cooking methods for enhancing the nutritional value, consumer preference, and willingness to pay for plantain and plantain-based products are not well understood. The knowledge gaps in the market and consumer dimension of the food chain need to be known to increase plantain utilization and guide breeding efforts. This research contributes by examining the cooking methods, consumer preference, and willingness to pay for plantain and plantain-based products in Cameroon and Nigeria. A household survey sample of 454 Cameroonian consumers in four divisions of Central Region and 418 Nigerian consumers in seven government areas of Oyo State in southwest Nigeria was the basis for the analysis. The results showed some levels of similarity and difference in the consumption and cooking of boiled, roasted, and fried plantain in both countries. The trend in consumption of all plantain-based products was constant in Cameroon but increased in Nigeria. The most important factor influencing Cameroonian consumers' choice of plantain and its products was taste, while the nutrition trait influenced Nigerian consumers. Both Cameroonian and Nigerian consumers considered packaging, location of produce, and size and quantity as the least important factors. In addition, socioeconomic characteristics were significant determinants of consumers' choices to consume plantain and its products. Gender significantly influenced (p < 0.05) taste, while nutrition was significantly driven (p < 0.05) by education and annual income. Household size played a significant role (p < 0.05) in consumers' choices when the price was considered. These findings serve as a guideline to improve existing products to match the needs of consumers in each country and develop products for different consumer segments and potentially increase production.
RÉSUMÉ
The effect of the pulsed-vacuum stimulation (PVS) on the external gelation process of calcium-alginate (Ca-Alg) hydrogel balls was studied. The process was conducted at four different working pressures (8, 35, 61, and 101 kPa) for three pulsed-vacuum cycles (one cycle consisted of three repetitions of 10 min of depressurization and 10 min of vacuum liberation). The diffusion coefficients (D) of calcium cations (Ca2+) gradually reduced over time and were significantly pronounced (p < 0.05) at the first three hours of the external gelation process. The rate of weight reduction (WR) and rate of volume shrinkage (Sv) varied directly according to the D value of Ca2+. A significant linear relationship between WR and Sv was observed for all working pressures (R2 > 0.91). An application of a pulsed vacuum at 8 kPa led to the highest weight reduction and shrinkage of Ca-Alg hydrogel samples compared to other working pressures, while 61 kPa seemed to be the best condition. Although all textural characteristics (hardness, breaking deformation, Young's modulus, and rupture strength) did not directly variate by the level of working pressures, they were likely correlated with the levels of WR and Sv. Scanning electron micrographs (SEM) supported that the working pressure affected the characteristics of Ca-Alg hydrogel structure. Samples stimulated at a working pressure of 8 kPa showed higher deformation with heterogenous structure, large cavities, and looser layer when compared with those at 61 kPa. These results indicate the PVS is a promising technology that can be effectively applied in the external gelation process of Ca-Alg gel.
RÉSUMÉ
Solar drying is one of the most efficient and cost-effective, renewable, and sustainable technologies to conserve agricultural products in Asian and sub-Saharan African (SSA) countries. This review paper presents the different types of solar dryers that are widely used in Africa and Asia. In addition, the pre-eminent effects of their use on product quality, as well as their economic, environmental, and social impacts, are highlighted. Since financial, external, and structural factors play a key role in the adoption and scaling of solar dryers, this paper also discusses the impact of these factors on the effectiveness of solar drying technologies in selected Asian and SSA countries.
Sujet(s)
Agriculture , Lumière du soleil , Afrique , Asie , DessiccationRÉSUMÉ
Cassava, rice, and banana flours were used individually to replace wheat flour in cereal-legume-based composite flours. The proximate composition, mineral content, antinutritional effect, mineral molar ratios, and aflatoxin level were investigated. Replacing wheat flour with rice flour significantly (Pâ¯<â¯0.05) improved protein, fat, potassium, and phosphorus content in samples. The molar ratios of phytate or oxalate to minerals (calcium and zinc) in all composite flours were lower than the reported critical values, except phytate to iron. However, all samples, except full replacement by rice flour, might not provide adequate zinc bioavailability when the effect of calcium and phytate on zinc absorption was collectively considered. Although all composite flours were contaminated with aflatoxins, only the control composed of wheat flour did not meet the EU regulatory threshold (4.0⯵g/kg) for total aflatoxins. The findings showed that nutritional properties and aflatoxin content of composite flours can be improved by replacement with local crops.
Sujet(s)
Aflatoxines/analyse , Fabaceae , Farine/analyse , Minéraux/analyse , Nutriments/analyse , Production végétale , Grains comestibles/composition chimique , Contamination des aliments/analyse , Manihot , Musa , Oryza , Phosphore/analyse , Acide phytique/analyse , Triticum , Zea maysRÉSUMÉ
Aflatoxins are noxious secondary metabolites, of certain fungal species, found in food and feed. Contamination of a commodity with aflatoxins is associated with production and storage losses, and subsequently less food availability. Aflatoxins can also pose human health risks and represent a barrier to the development of trade, in both domestic and international markets. In this study, samples of cassava, maize, groundnut, beans, soybean, sorghum and milk, and their processed products were collected from local markets in Burundi and Eastern DRC. In order to investigate the levels of aflatoxin, crop samples were analyzed using a single step lateral flow immunochromatographic assay (Reveal Q+), while enzyme-linked immune-sorbent assay (ELISA) was used to analyze aflatoxin-M1 in milk, yogurt, and cheese samples. The results revealed the presence of aflatoxins in all samples from both countries, with levels ranging from 1.3 to 2,410 µg/kg. Samples collected from Burundi contained relatively higher (p > 0.0.5) levels of aflatoxins. In 51% of all the crops samples, total aflatoxin contamination was above the EU maximum tolerable level of 4 µg/kg. Processed products, particularly from groundnut, maize, and sorghum, had the highest levels of aflatoxin contamination when compared to unprocessed grain. With regard to milk and dairy products, the level of aflatoxin-M1 ranged from 4.8 to 261.1 ng/kg. Approximately 29% of milk and yogurt samples had aflatoxin-M1 higher than the EU regulatory limit of 50 ng/kg, whereas 20% of cheese samples were found to be contaminated at levels higher than the maximum limit of 250 ng/kg. These results can serve as the basis for pre- and postharvest approaches to reduce aflatoxin contamination in agricultural commodities in Burundi and Eastern DRC in order to reduce health risk, avoid reduced production in livestock, and open up export markets.
RÉSUMÉ
Dietary patterns for consumers among the elite and middle-income classes in developing countries are shifting rapidly toward the consumption of more animal-based products. Although this shift presents opportunities, there are significant market failures affecting their preferences and willingness to pay (WTP). This study used a multistage sample survey of 309 consumers from three different communities of Bukavu, Eastern DRC, to examine the effect of socioeconomic/socio-demographic characteristics and quality attributes on consumers' purchasing decisions and WTP for meat products. The results suggested that about 53% of the respondents were dissatisfied with meat products in the market due to their high price, low quantity, unhealthiness, and harmful effects. Older female respondents living in urban areas were more likely to purchase meat products. Their WTP was significantly determined by attributes such as color, in-mouth texture, and availability. Nutrition, harmful effects, and availability of meat products are the important factors that influence purchasing decisions among higher income groups. Addressing these market failures could have an impact on the meat market, improving the nutrition of low-income consumers and ensuring food safety standards in DRC and other developing countries with similar challenges.
RÉSUMÉ
Despite efforts to reduce aflatoxin contamination and associated mycotoxin poisoning, the phenomenon continues to pose a public health threat in food and feed commodity chains. In this study, 300 samples of cassava, maize, and groundnut were collected from farmers' households in Eastern DRC and analyzed for incidence of aflatoxins. In addition, the farmers' level of knowledge of the causes and consequences of contamination and the measures for prevention were also examined by administering questionnaires to a cross section of 150 farmers. The results showed the presence of aflatoxins in all samples, with levels ranging from 1.6 to 2,270 µg/kg. In 68% of all samples, total aflatoxin contamination was above 4 µg/kg, the maximum tolerable level set by the European Union. Farmers ranked high humidity, improper storage practices, and poor soils as potential causes of aflatoxin contamination and changes in color, smell, and taste, and difficulty in selling crops as consequences. They identified crop management practices as the most effective way to control contamination. The results also revealed that most farmers apply preharvest crop management practices as a means of controlling contamination. More educated households were more knowledgeable about aflatoxins. Female-headed and married households were less likely to be willing to pay for aflatoxin control. About 28% of farmers claimed to be willing to allocate resources to seed intervention while a smaller proportion agreed to pay for training and information services. The result further suggests that an adoption of pre- and postharvest technologies together with awareness creation is still required to reduce aflatoxin contamination in the country.
RÉSUMÉ
The effects were studied of two different adsorbent combinations (com I; bentonite: activated carbon: celiteâ¯=â¯3:4:1 and com II; bentonite: activated clay: celiteâ¯=â¯3:4:1â¯+â¯1% citric acid) on the physico-chemical changes of oil used continuously for deep-fat frying of chicken drumsticks. The results showed that the % FFA was reduced by 44.3, PV by 50.2, and FOS reading by 40.1% in com I whereas reductions of 41.6, 44.9, and 32.8%, respectively, were found in com II. The oil treated with com II exhibited a lighter color than with com I. The changes of oil color in com I were L∗ 30.7, a∗ 1.7, and b∗ 31.9%; in com II they were 53.2, 19.1, and 39.5% respectively. The higher the L∗ observed, the better the oil quality obtained because of the bleaching ability of adsorbents. Therefore, the use of such adsorbents is recommended for poultry processing.
Sujet(s)
Manipulation des aliments/méthodes , Produits de basse-cour , Huile de soja/composition chimique , Silicates d'aluminium/composition chimique , Animaux , Bentonite/composition chimique , Poulets , Acide citrique/composition chimique , Argile , Couleur , Cuisine (activité)/méthodes , Terre de diatomée/composition chimiqueRÉSUMÉ
Aflatoxins are mainly produced by certain strains of Aspergillus flavus, which are found in diverse agricultural crops. In many lower-income countries, aflatoxins pose serious public health issues since the occurrence of these toxins can be considerably common and even extreme. Aflatoxins can negatively affect health of livestock and poultry due to contaminated feeds. Additionally, they significantly limit the development of international trade as a result of strict regulation in high-value markets. Due to their high stability, aflatoxins are not only a problem during cropping, but also during storage, transport, processing, and handling steps. Consequently, innovative evidence-based technologies are urgently required to minimize aflatoxin exposure. Thus far, biological control has been developed as the most innovative potential technology of controlling aflatoxin contamination in crops, which uses competitive exclusion of toxigenic strains by non-toxigenic ones. This technology is commercially applied in groundnuts maize, cottonseed, and pistachios during pre-harvest stages. Some other effective technologies such as irradiation, ozone fumigation, chemical and biological control agents, and improved packaging materials can also minimize post-harvest aflatoxins contamination in agricultural products. However, integrated adoption of these pre- and post-harvest technologies is still required for sustainable solutions to reduce aflatoxins contamination, which enhances food security, alleviates malnutrition, and strengthens economic sustainability.
RÉSUMÉ
Papaya has been identified as a valuable source of nutrients and antioxidants, which are beneficial for human health. To preserve the nutritional properties after drying, appropriate storage specifications should be considered. This study aimed to investigate the quality and stability of air-dried papaya in terms of quality dynamics and behavior of bio-active compounds during storage for up to 9 months in two packaging materials: aluminum laminated polyethylene and polyamide/polyethylene. Samples with moisture content (MC) of 0.1328 g g(-1) and water activity (aw) of 0.5 were stored at 30 °C and relative humidity (RH) of 40-50%. The MC, aw, degree of browning (DB) and 5-hydroxymethylfurfural (HMF) content were found to notably increase as storage progressed. On the contrary, there was a significant decrease in antioxidant capacity (DPPH, FRAP and ABTS), total phenolic (TP) and ascorbic acid (AA) contents. Packaging in aluminum laminated polyethylene under ambient conditions was found to better preserve bio-active compounds and retard increases in MC, aw and DB, when compared to polyamide/polyethylene.