Gamma irradiating chromatography columns enables bioburden-free integrated continuous biomanufacturing.

An important consideration for integrated continuous biomanufacturing is that the downstream chromatography steps integrated with the bioreactor should maintain a low bioburden state throughout the entire duration of the operation. One potential strategy to achieve this is to start bioburden-free and functionally close the chromatography system. While chromatography skids themselves can be rendered bioburden-free, limitations exist in applying these methods to chromatography columns. The small column sizes used in continuous multicolumn chromatography enable gamma irradiation of disposable columns to render them bioburden-free. However, this approach has not been widely implemented, likely because gamma irradiation can negatively impact resin performance. Here, several protective mobile-phase modifiers were screened and shown to help chromatography resins retain naïve-like performance. Gamma irradiated columns were then integrated into perfusion bioreactors for continuous capture. Successful integrated continuous capture downstream of perfusion bioreactors for greater than 40 days using protein A, custom affinity, and non-affinity capture resins for multiple biologic modalities is demonstrated in development and commercial settings. No indications of time-based performance decline or bioburden growth have been observed. This strategy enables bioburden-free integrated continuous biomanufacturing operations and could allow full process closure and decreased environmental control requirements for facilities; thus, permitting simultaneous multi-product operations in a ballroom arrangement.

Single-step affinity purification of enzyme biotherapeutics: a platform methodology for accelerated process development.

Downstream sample purification for quality attribute analysis is a significant bottleneck in process development for non-antibody biologics. Multi-step chromatography process train purifications are typically required prior to many critical analytical tests. This prerequisite leads to limited throughput, long lead times to obtain purified product, and significant resource requirements. In this work, immunoaffinity purification technology has been leveraged to achieve single-step affinity purification of two different enzyme biotherapeutics (Fabrazyme® [agalsidase beta] and Enzyme 2) with polyclonal and monoclonal antibodies, respectively, as ligands. Target molecules were rapidly isolated from cell culture harvest in sufficient purity to enable analysis of critical quality attributes (CQAs). Most importantly, this is the first study that demonstrates the application of predictive analytics techniques to predict critical quality attributes of a commercial biologic. The data obtained using the affinity columns were used to generate appropriate models to predict quality attributes that would be obtained after traditional multi-step purification trains. These models empower process development decision-making with drug substance-equivalent product quality information without generation of actual drug substance. Optimization was performed to ensure maximum target recovery and minimal target protein degradation. The methodologies developed for Fabrazyme were successfully reapplied for Enzyme 2, indicating platform opportunities. The impact of the technology is significant, including reductions in time and personnel requirements, rapid product purification, and substantially increased throughput. Applications are discussed, including upstream and downstream process development support to achieve the principles of Quality by Design (QbD) as well as integration with bioprocesses as a process analytical technology (PAT).

Periodic counter-current chromatography -- design and operational considerations for integrated and continuous purification of proteins.

Integrated and continuous processing of recombinant proteins offers several advantages over batch or semi-batch processing used traditionally in the biotechnology industry. This paper presents a theoretical and practical approach for designing a periodic counter-current chromatography (PCC) operation as a continuous capture purification step that is integrated with a perfusion cell culture process. The constraints for continuous and optimal PCC operation govern the selection of residence time and number of columns. The flexibility available in PCC design for selection of these parameters is dictated by the binding characteristics of the target protein on the capture resin. Using an empirical model for the protein breakthrough curve, analytical solutions to determine these conditions were derived and verified with experimental results for three different proteins: two relatively unstable proteins (recombinant enzymes) and a relatively stable protein (monoclonal antibody). The advantages of a continuous downstream capture step are highlighted for the three case studies in comparison with the existing batch chromatography processes. The use of PCC leads to improvements in process economics due to higher resin capacity utilization and correspondingly lower buffer consumption. Furthermore, integrated and continuous bioprocessing results in a smaller facility footprint by elimination of harvest hold vessels and clarification, as well as by reducing the capture column size by one to two orders of magnitude.

Integrated continuous production of recombinant therapeutic proteins.

In the current environment of diverse product pipelines, rapidly fluctuating market demands and growing competition from biosimilars, biotechnology companies are increasingly driven to develop innovative solutions for highly flexible and cost-effective manufacturing. To address these challenging demands, integrated continuous processing, comprised of high-density perfusion cell culture and a directly coupled continuous capture step, can be used as a universal biomanufacturing platform. This study reports the first successful demonstration of the integration of a perfusion bioreactor and a four-column periodic counter-current chromatography (PCC) system for the continuous capture of candidate protein therapeutics. Two examples are presented: (1) a monoclonal antibody (model of a stable protein) and (2) a recombinant human enzyme (model of a highly complex, less stable protein). In both cases, high-density perfusion CHO cell cultures were operated at a quasi-steady state of 50-60 × 10(6) cells/mL for more than 60 days, achieving volumetric productivities much higher than current perfusion or fed-batch processes. The directly integrated and automated PCC system ran uninterrupted for 30 days without indications of time-based performance decline. The product quality observed for the continuous capture process was comparable to that for a batch-column operation. Furthermore, the integration of perfusion cell culture and PCC led to a dramatic decrease in the equipment footprint and elimination of several non-value-added unit operations, such as clarification and intermediate hold steps. These findings demonstrate the potential of integrated continuous bioprocessing as a universal platform for the manufacture of various kinds of therapeutic proteins.

A modified IMAC method for the capture of target protein from mammalian cell culture harvest containing metal chelating species.

Although immobilized metal affinity chromatography (IMAC) offers high capacity and protein selectivity it is not typically used commercially for the capture of native proteins from mammalian cell culture harvest. This is due mainly to the potential for low target recovery due to the presence of strong metal ion chelating species in the harvest that compete for the metal immobilized on the resin. To address this issue a buffer exchange step, such as tangential flow filtration (TFF), is added after harvest clarification and prior to IMAC to remove the interfering harvest components. The addition of a TFF step adds process time and cost and reduces target protein recovery. The elimination of the TFF might make IMAC competitive with other orthogonal methods of protein capture. In this study, we developed a modified IMAC method to allow the direct loading of clarified mammalian harvest without prior buffer exchange (direct IMAC). Although the target enzyme recovery was lower than that from standard IMAC the elimination of the buffer exchange step resulted in a 19% increase in overall enzyme recovery. The target enzyme capacity in direct IMAC was higher, in our experience, than the capacity of hydrophobic interaction (HIC) and ion-exchange (IEX) for protein capture. An economic evaluation of using direct IMAC as a capture step in manufacturing is also discussed.

Antagonists to human and mouse vascular endothelial growth factor receptor 2 generated by directed protein evolution in vitro.

Using directed in vitro protein evolution, we generated proteins that bound and antagonized the function of vascular endothelial growth factor receptor 2 (VEGFR2). Binders to human VEGFR2 (KDR) with 10-200 nM affinities were selected by using mRNA display from a library (10(13) variants) based on the tenth human fibronectin type III domain (10Fn3) scaffold. Subsequently, a single KDR binding clone (K(d) = 11 nM) was subjected to affinity maturation. This yielded improved KDR binding molecules with affinities ranging from 0.06 to 2 nM. Molecules with dual binding specificities (human/mouse) were also isolated by using both KDR and Flk-1 (mouse VEGFR2) as targets in selection. Proteins encoded by the selected clones bound VEGFR2-expressing cells and inhibited their VEGF-dependent proliferation. Our results demonstrate the potential of these inhibitors in the development of anti-angiogenesis therapeutics.