Hyperspectral screen-image-synthesis meter with scattering-noise suppression.

The screen image synthesis (SIS) meter was originally proposed as a high-speed measurement tool, which fused the measured data from multiple sample-rotational angles to produce a whole-field measurement result. However, it suffered from stray light noise and lacked the capability of spectrum measurement. In this study, we propose an SIS system embedded with a snapshot hyperspectral technology, which was based on a dispersion image of the sparse sampling screen (SSS). When a photo was captured, it was transformed and calibrated to hyperspectral data at a specific sample-rotational angle. After the hyperspectral data in all sample-rotational angles were captured, an SIS image-fusion process was then applied to get the whole field hyperspectral data. By applying SSS to the SIS meter, we not only create a screen image synthesis hyperspectral meter but also effectively address the issue of stray-light noise. In the experiment, we analyze its correctness by comparing the hyperspectral value with a one-dimensional spectrum goniometer (ODSG). We also show the 2D color temperature coefficient distribution and compare it with the ODSG. Experimental results also demonstrate the feasibility in terms of both spectrum distribution meter and color coefficient temperature distribution meter.

Hybrid high-concentration photovoltaic system designed for different weather conditions.

In this study, we propose a novel high-concentration photovoltaic (HCPV) cell by considering both the light leakage characteristics of the Fresnel-lens-based solar cell modules and the performance issues arising from cloud shading in practical use. We use our self-constructed systems to conduct field measurements for up to half a year under various environmental conditions. According to the acquired results, it was surprising to know that in the area other than the focusing area, the so-called light leakage region, there always bears illuminance of about 20,000-40,000 lx whether it is a sunny day or a cloudy day with different cloud conditions. Such an interesting result is caused by the light scattering of the clouds and the inherent leakage characteristic of a Fresnel lens. To prove this important finding, we simulated the illuminance of the Fresnel lens structure used in the measurement with apertures of different sizes to determine the detected area. In the laboratory, the diffuse plates were used to mimic the situation of varying cloud layer thicknesses. The trend of calculated and measured results fitted well with the field measurements. Also, the experimental and simulation results show that the round angle and draft facet of the Fresnel lens were responsible for light leakage. This finding prompted us to propose a hybrid high-concentration solar module in which more cost-effective polycrystalline silicon solar cells are placed around the high-efficiency wafer of HCPV to capture the dissipated light leakage and convert it into usable electricity.

Study of banana preservation extension by UVC radiation in precise monitoring LED irradiation cavity.

Ultraviolet C (UVC) radiation has been considered a possible option to alleviate the seriousness of black spots on bananas during preservation which help increase economic efficiency. In this study, using 275 nm UVC light-emitting diodes (LEDs), a preliminary cavity with dimensions of 30 × 30 × 30 cm was designed and fabricated to aid in reducing black spots on bananas with the aim of application in the factory conveyor belts. The UVC irradiance distribution was thoroughly monitored for many sections at different box heights in both simulation and measurement, with a dominant range of 6-9 W/m2 in the middle. Afterward, trials were conducted in vitro and in vivo at different selected UVC doses. The results in vitro revealed that a dose of over 0.36 kJ/m2 has an excellent effect on inhibiting the colonial germination of fungal Colletotrichum musae, a common species of fungi causing black spot disease on bananas. In vivo conditions, with a short exposure time of around 5 s, the black spots on UVC-irradiated banana peel significantly reduced with minimal sensory damage compared to a control banana via observation after seven days from treatment. Finally, the optimal UVC dose is proposed from 0.030 to 0.045 kJ/m2 for the one-time treatment when considering the upper surface of the banana. With flexibility advantage and short exposure time, the fabricated cavity (box) promises to bring a lot of application potential to aid banana preservation in factories and households.

Active thermal-fuse for stopping blue light leakage of white light-emitting diodes driven by constant current.

In this study, we proposed and demonstrated a circuit design for solving problems related to blue light leakage (e.g., eye damage) when phosphor-converted white light-emitting diodes (pcW-LEDs) overheat. This circuit only needs a positive thermal coefficient thermistor, resistor, and diodes in series and parallel; thus, it can easily be integrated into components. Simulations and corresponding experimental results show that this method can accurately suppress the overheating component's injection current and allow for LEDs to work normally after returning to the operating temperature. It thus allows the user's eyes to be actively protected, e.g., to avoid exposure to the bluish light when overheating occurs. In addition, the quenching of luminous flux is a signal to remind the user to replace the LED. The proposed method is low-cost, effective, simple, and useful for increasing the quality of LED lighting and biological safety.

GaN-based mini-LED matrix applied to multi-functional forward lighting.

In this paper, we propose and demonstrate to use of a single reflector with 68 segments to project vehicle low beam and high beam with the use of a GaN-based mini-LED matrix, which is a 5 × 6 LED die array. The design of the reflector is based on light field technology in considering etendue from the light source across the segments. The group of the segments with smaller etendue from the LED dies in the bottom 2 rows are used to project low beams. When the other LED dies are turned on, the reflector will project light upward and form the high beam. The selection of the turn-on LED dies in the mini-LED matrix can adjust the width of the illumination pattern so that an adaptive low/high beam can be performed. Besides, to extend the functionality of the headlamp module, we propose to dispense IR phosphor on LED dies in the high-beam zone of the GaN-based mini-LED matrix. Thus the vehicle can emit IR high beam, which can be imaged through a camera and can be incorporated with machine vision for an autonomous vehicle without using a complicated adaptive headlight to avoid glare. The proposed multi-function in spatial and spectral domains will be helpful to various applications with use of a mini-LED matrix.

Single reflector design for integrated low/high beam meeting multiple regulations with light field management.

This paper proposed an effective multi-objective design procedure, called light field management, for a single multi-segment reflector that can simultaneously project low beams and high beams for bicycle and e-bike applications. Furthermore, two different regulations can be met, including the K-mark and the ECE Class B regulations. Through light field management, the etendue and flux density of each segment can be effectively managed, so that the design successfully meets the multiple regulations. In the experimental verification, two mockup samples including a plastic reflector with aluminum coating and an aluminum reflector were fabricated to verify the validity of the design. The experiment showed that the contrast across the cutoff line reached 100 and above, where the brightest point for low beams reached 200 lux and the whole pattern reached 250 lux. The supreme behavior of the head lamp shows that the proposed design procedure is valuable and helpful to an optical designer.