RÉSUMÉ
Invasive fungal infections pose a significant public health threat. The lack of precise and timely diagnosis is a primary factor contributing to the significant increase in patient mortality rates. Here, an interface-modulated biosensor utilizing an optical fiber for quantitative analysis of fungal biomarkers at the early stage of point-of-care testing (POCT), is reported. By integrating surface refractive index (RI) modulation and plasmon enhancement, the sensor to achieve high sensitivity in a directional response to the target analytes, is successfully optimized. As a result, a compact fiber-optic sensor with rapid response time, cost-effectiveness, exceptional sensitivity, stability, and specificity, is developed. This sensor can successfully identify the biomarkers of specific pathogens from blood or other tissue specimens in animal models. It quantifies clinical blood samples with precision and effectively discriminates between negative and positive cases, thereby providing timely alerts to potential patients. It significantly reduces the detection time of fungal infection to only 30 min. Additionally, this approach exhibits remarkable stability and achieves a limit of detection (LOD) three orders of magnitude lower than existing methods. It overcomes the limitations of existing detection methods, including a high rate of misdiagnosis, prolonged detection time, elevated costs, and the requirement for stringent laboratory conditions.
Sujet(s)
Marqueurs biologiques , Techniques de biocapteur , Fibres optiques , Techniques de biocapteur/méthodes , Techniques de biocapteur/instrumentation , Marqueurs biologiques/analyse , Marqueurs biologiques/sang , Humains , Animaux , Champignons , Limite de détection , Technologie des fibres optiques , Mycoses/diagnostic , Analyse sur le lieu d'intervention , SourisRÉSUMÉ
The use of light as a powerful tool for disease treatment has introduced a new era in tumor treatment and provided abundant opportunities for light-based tumor theranostics. This work reports a photothermal theranostic fiber integrating cancer detection and therapeutic functions. Its self-heating effect can be tuned at ultralow powers and used for self-heating detection and tumor ablation. The fiber, consisting of a dual-plasmonic nanointerface and an optical microfiber, can be used to distinguish cancer cells from normal cells, quantify cancer cells, perform hyperthermal ablation of cancer cells, and evaluate the ablation efficacy. Its cancer cell ablation rate reaches 89% in a single treatment. In vitro and in vivo studies reveal quick, deep-tissue photonic hyperthermia in the NIR-II window, which can markedly ablate tumors. The marriage of a dual-plasmonic nanointerface and an optical microfiber presents a novel paradigm in photothermal therapy, offering the potential to surmount the challenges posed by limited light penetration depth, nonspecific accumulation in normal tissues, and inadvertent damage in current methods. This work thus provides insight for the exploration of an integrated theranostic platform with simultaneous functions in cancer diagnostics, therapeutics, and postoperative monitoring for future practical applications.
Sujet(s)
Hyperthermie provoquée , Nanoparticules , Tumeurs , Humains , Médecine de précision , Tumeurs/thérapie , Tumeurs/traitement médicamenteux , Photothérapie/méthodes , Nanomédecine théranostique/méthodes , Hyperthermie provoquée/méthodes , Lignée cellulaire tumorale , Nanoparticules/usage thérapeutiqueRÉSUMÉ
Optical fibers can be effective biosensors when employed in early-stage diagnostic point-of-care devices as they can avoid interference from molecules with similar redox potentials. Nevertheless, their sensitivity needs to be improved for real-world applications, especially for small-molecule detection. This work demonstrates an optical microfiber biosensor for dopamine (DA) detection based on the DA-binding-induced aptamer conformational transitions that occur at plasmonic coupling sites on a double-amplified nanointerface. The sensor exhibits ultrahigh sensitivity when detecting DA molecules at the single-molecule level; additionally, this work provides an approach for overcoming optical device sensitivity limits, further extending optical fiber single-molecule detection to a small molecule range (e.g., DA and metal ions). The selective energy enhancement and signal amplification at the binding sites effectively avoid nonspecific amplification of the whole fiber surface which may lead to false-positive results. The sensor can detect single-molecule DA signals in body-fluids. It can detect the released extracellular DA levels and monitor the DA oxidation process. An appropriate aptamer replacement allows the sensor to be used for the detection of other target small molecules and ions at the single-molecule level. This technology offers alternative opportunities for developing noninvasive early-stage diagnostic point-of-care devices and flexible single-molecule detection techniques in theoretical research.
Sujet(s)
Techniques de biocapteur , Dopamine , Techniques de biocapteur/méthodes , Fibres optiques , Métaux , IonsRÉSUMÉ
Portable devices, which can detect and characterize the individual nanoparticles in real time, are of insignificant interest for early diagnosis, homeland security, semiconductor manufacturing and environmental monitoring. Optical microfibers present a good potential in this field, however, are restricted by the sensitivity limit. This study reports the development of a 3D plasmonic nanointerface, which is made of a Cu-BTC framework supporting Cu3-xP nanocrystals, enhancing the optical microfiber for real-time detection and sizing of single nanoparticles. The Cu3-xP nanocrystals are successfully embedded in the 3D Cu-BTC framework. The localized-surface plasmon resonance is tuned to coincide with the evanescent field of the optical microfiber. The 3D Cu-BTC framework, as the scaffold of nanocrystals, confines the local resonance field on the microfiber with three dimensions, at which the binding of target nanoparticles occurs. Based on the evanescent field confinement and surface enhancement by the nanointerface, the optical microfiber sensor overcomes its sensitivity limit, and enables the detection and sizing of the individual nanoparticles. The compact size and low optical power supply of the sensor confirm its suitability as a portable device for the real-time single-nanoparticle characterization, especially for the convenient evaluation of the ultrafine particles in the environment. This work opens up an approach to overcome the sensitivity limit of the optical microfibers, as long with stimulating the portable real-time single-nanoparticle detection and sizing.
RÉSUMÉ
Quantifying the microRNA (miRNA) level and manipulating them in complex samples, such as serum, is of intense interest because miRNAs are important diagnostic markers. Here, we demonstrate an optical microfiber integrating of untrasensitive detection function and local photothermal therapy potential. A nanointerface consisting of GO supported Cu2-xS nanoplates presented the localized surface plasmon resonance (LSPR) tuned to be consistent with the operation wavelength of the microfiber transducer. It enhanced the surface energy density of evanescent field, on which the miRNA sensing and therapy occurred. With evanescent field enhancement by the plasmonic nanointerface, the sensor exhibits an ultrahigh sensitivity for detecting microRNA at concentrations ranging from 0.1 aM to 10 pM. It is also capable of differentiating one-base mismatches of miRNA at ultralow concentrations (as low as 10 aM) in serum. The photothermal effect of nanointerface simultaneously endows the sensor with the potential for localized photothermal therapy. This work presents a possible approach for the in-situ integration of diagnosis and treatment in early stage.
Sujet(s)
microARN/sang , Hybridation d'acides nucléiques , Résonance plasmonique de surface/instrumentation , Mésappariement de bases , Conception d'appareillage , Humains , Limite de détection , microARN/génétique , Fibres optiques , Thérapie photothermique/instrumentationRÉSUMÉ
The detection of carcinoembryonic antigen (CEA)-related cell adhesion molecules 5 (CEACAM5) is significant in cancer prewarning. Early diagnosis can effectively alleviate the danger of cancer. Point-of-care testing (POCT) has become a competitive technology for early detection. Fiber optic biosensors have great potential as POCT tools. However, their limits of detection (LODs) are not sufficient to afford ultralow concentration detection at the early stage. Herein, this work presents an optical microfiber sensor functionalized by a polystyrene@gold nanosphere (PS@Au nanosphere) interface for a synergistic sensitization effect to detect the ultralow CEACAM5 concentrations in serum at the early stage. The sensor's LOD achieves 3.54 × 10-17 M in pure solution and 5.27 × 10-16 M in serum, with the sensitization effect coupled with surface area enlargement and electromagnetic enhancement of interface. This LOD is about 6 orders of magnitude lower than that of current methods. It can be employed to detect the biomarkers at ultralow concentrations present in serum in the early stages of cancer. As the interfacial synergistic sensitization strategy is suitable for refractive index (RI)-based optical transducers, this work provides new opportunities to employ fiber optic biosensors as effective POCT tools.
Sujet(s)
Techniques de biocapteur , Antigène carcinoembryonnaire/isolement et purification , Tumeurs/sang , Antigène carcinoembryonnaire/sang , Technologie des fibres optiques , Protéines liées au GPI/sang , Protéines liées au GPI/isolement et purification , Or/composition chimique , Humains , Limite de détection , Nanosphères/composition chimiqueRÉSUMÉ
For early-stage diagnostics, there is a strong demand for sensors that can rapidly detect biomarkers at ultralow concentration or even at the single-molecule level. Compared with other types of sensors, optical microfibers are more convenient for use as point-of-care devices in early-stage diagnostics. However, the relatively low sensitivity strongly hinders their use. To this end, an optical microfiber is functionalized with a plasmonic nanointerface consisting of black phosphorus-supported Au nanohybrids. The microfiber is able to detect epidermal growth factor receptor (ErbB2) at concentrations ranging from 10 zM to 100 nM, with a detection limit of 6.72 zM, enabling detection at the single-molecule level. The nanointerface-sensitized microfiber is capable of differentiating cancer cells from normal cells and treating cancer cells through cellular photothermal therapy. This work opens up a possible approach for the integration of cellular diagnosis and treatment.
Sujet(s)
Marqueurs biologiques , Techniques de biocapteur , Nanotechnologie , Fibres optiques , Imagerie de molécules uniques/méthodes , Algorithmes , Humains , Hyperthermie provoquée/méthodes , Modèles théoriques , Nanotechnologie/instrumentation , Nanotechnologie/méthodes , Photothérapie/méthodes , Récepteur ErbB-2 , Sensibilité et spécificité , Imagerie de molécules uniques/instrumentationRÉSUMÉ
The translocation of cytochrome c (cyt c) from mitochondria and out of cell is an important signal of cell apoptosis. Monitoring this process extracellularly without invasion and cytotoxicity to cells is of great importance to understand certain diseases at the cellular level; however, it requires sensors with ultrahigh sensitivity and miniature size. This study reports an optical microfiber aptasensor with a silver-decorated graphene (Ag@RGO) nanointerface for real-time cellular cyt c monitoring. Owing to an interfacial sensitization effect coupled with the plasmonic electromagnetic enhancement of silver nanoparticles and chemical enhancement of graphene platforms, which enhances the energy density on microfiber surface obviously, the lowest limit of detection achieved is 6.82 × 10-17 m, which is approximately five orders of magnitude lower than those of existing methods. This microfiber successfully detects the ultralow concentrations of cyt c present during the initial stage of apoptosis in situ. As the microfiber functionalized by Ag@RGO nanointerface can be varied to meet any specific detection objective, this work opens up new opportunities to quantitatively monitor biological functions occurring at the cellular level.
RÉSUMÉ
Interfacing bio-recognition elements to optical materials is a longstanding challenge to manufacture sensitive biosensors and inexpensive diagnostic devices. In this work, a graphene oxide (GO) interface has been constructed between silica microfiber and bio-recognition elements to develop an improved γ-aminobutyric acid (GABA) sensing approach. The GO interface, which was located at the site with the strongest evanescent field on the microfiber surface, improved the detection sensitivity by providing a larger platform for more bio-recognition element immobilization, and amplifying surface refractive index change caused by combination between bio-recognition elements and target molecules. Owing to the interface improvement, the microfiber has a three times improved sensitivity of 1.03 nm/log M for GABA detection, and hence a lowest limit of detection of 2.91 × 10-18 M, which is 7 orders of magnitude higher than that without the GO interface. Moreover, the micrometer-sized footprint and non-radioactive nature enable easy implantation in human brains for in vivo applications.
RÉSUMÉ
Recently, although great attention has been paid to the design and exploitation of new classes of near-infrared (NIR) light-induced materials, the photothermal dynamics of these materials have not been fully explored. However, understanding the photothermal dynamics of NIR-light-responsive composites is of fundamental importance from the viewpoint of smart material design and processing at the nanoscale, and for the understanding of a number of related phenomena. Herein, an alternative approach to observe the dynamics of the photothermal process is developed, which relies on probing the local refractive index change in the nanocomposite matrix with a silica microfiber interferometer. In this approach, the light-induced morphological change of the polymer is captured by the microfiber because of the strong evanescent-field interaction, and is translated into a significant wavelength shift in the interferometric fringe. Therefore, probing the matrix to study the local photothermal dynamics is possible. The optical microfiber records various phase-transformation stages of the photothermal nanocomposites induced by different optothermal mechanisms, especially revealing the reconstruction process of Ag@reduced graphene oxide (Ag@G) nanosheets during the initial stage of the photothermal process. The feasibility of using optical fibers for studying the inner mechanism of material phase change is presented herein and it provides a new approach for fundamental investigations into smart material development at the nanoscales.