Combining ZnO and PDINO as a Thick Cathode Interface Layer for Polymer Solar Cells.

Cathode interface layers (CILs) are important for electron extraction in polymer solar cells (PSCs). Currently, the thickness of CILs is often below 15 nm due to their low electron mobility, which is not favorable for large-scale fabrication. Herein, we report a thick CIL for efficient PSCs by modifying the ZnO nanocrystals (NCs) film with perylene diimides functionalized with amino oxide (PDINO). The combined ZnO NCs/PDINO CIL inherits the high electron mobility of ZnO NCs and dense morphology of PDINO, affording higher power conversion efficiencies (PCEs) of its devices than the sole component controls. The PSCs with the ZnO NCs/PDINO CIL also exhibit good tolerance to the CIL thickness, and the PM6:Y6 and PM6:BTP-eC9 devices can achieve high PCEs of over 15% at the CIL thickness of 70 nm. Further, the ZnO NCs/PDINO devices show better stability than those with sole ZnO NCs or PDINO. Our results provide a new way to construct potential CILs for high performance PSCs.

Upside-Down Molding Approach for Geometrical Parameter-Tunable Photonic Perovskite Nanostructures.

Considering that the periodic photonic nanostructures are commonly realized by expensive nanofabrication processes and the tunability of structure parameters is limited and complicated, we demonstrate a solution-processed upside-down molding method to fabricate photonic resonators on perovskites with a pattern geometry controllable to a certain extent. This upside-down approach not only reveals the effect of capillary force during the imprinting but also can control the waveguide layer thickness due to the inversion of the perovskite membranes.

Establishing Multifunctional Interface Layer of Perovskite Ligand Modified Lead Sulfide Quantum Dots for Improving the Performance and Stability of Perovskite Solar Cells.

While organic-inorganic halide perovskite solar cells (PSCs) show great potential for realizing low-cost and easily fabricated photovoltaics, the unexpected defects and long-term stability against moisture are the main issues hindering their practical applications. Herein, a strategy is demonstrated to address the main issues by introducing lead sulfide quantum dots (QDs) on the perovskite surface as the multifunctional interface layer on perovskite film through establishing perovskite as the ligand on PbS QDs. Meanwhile, the multifunctions are featured in three aspects including the strong interactions of PbS QDs with perovskites particularly at the grain boundaries favoring good QDs coverage on perovskites for ultimate smooth morphology; an inhibition of iodide ions mobilization by the strong interaction between iodide and the incorporated QDs; and the reduction of the dangling bonds of Pb2+ by the sulfur atoms of PbS QDs. Finally, the device performances are highly improved due to the reduced defects and non-radiative recombination. The results show that both open-circuit voltage and fill factor are significantly improved to the high values of 1.13 V and 80%, respectively in CH3 NH3 PbI3 -based PSCs, offering a high efficiency of 20.64%. The QDs incorporation also enhances PSCs' stability benefitting from the induced hydrophobic surface and suppressed iodide mobilization.

Head-to-Head Linkage Containing Bithiophene-Based Polymeric Semiconductors for Highly Efficient Polymer Solar Cells.

Narrow bandgap (1.37-1.46 eV) polymers incorporating a head-to-head linkage containing 3-alkoxy-3'-alkyl-2,2'-bithiophene are synthesized. The head-to-head linkage enables polymers with sufficient solubility and the noncovalent sulfur-oxygen interaction affords polymers with high degree of backbone planarity and film ordering. When integrated into polymer solar cells, the polymers show a promising power conversion efficiency approaching 10%.

Recent Advances in Interface Engineering for Planar Heterojunction Perovskite Solar Cells.

Organic-inorganic hybrid perovskite solar cells are considered as one of the most promising next-generation solar cells due to their advantages of low-cost precursors, high power conversion efficiency (PCE) and easy of processing. In the past few years, the PCEs have climbed from a few to over 20% for perovskite solar cells. Recent developments demonstrate that perovskite exhibits ambipolar semiconducting characteristics, which allows for the construction of planar heterojunction (PHJ) perovskite solar cells. PHJ perovskite solar cells can avoid the use of high-temperature sintered mesoporous metal oxides, enabling simple processing and the fabrication of flexible and tandem perovskite solar cells. In planar heterojunction materials, hole/electron transport layers are introduced between a perovskite film and the anode/cathode. The hole and electron transporting layers are expected to enhance exciton separation, charge transportation and collection. Further, the supporting layer for the perovskite film not only plays an important role in energy-level alignment, but also affects perovskite film morphology, which have a great effect on device performance. In addition, interfacial layers also affect device stability. In this review, recent progress in interfacial engineering for PHJ perovskite solar cells will be reviewed, especially with the molecular interfacial materials. The supporting interfacial layers for the optimization of perovskite films will be systematically reviewed. Finally, the challenges remaining in perovskite solar cells research will be discussed.

Toward Highly Sensitive Polymer Photodetectors by Molecular Engineering.

Modified 3,4-ethylenedioxythiophene is employed as the conjugated side chain in conjugated polymers, which can significantly depress the dark current of the polymer photodetectors with little associated decrease in photovoltaic properties, thus enhanceing the detectivities. This approach can be applied to a variety of conjugated polymers covering a photoresponse range from UV to NIR.

Solution-processed ultrasensitive polymer photodetectors with high external quantum efficiency and detectivity.

Operating at room temperature, polymer photodetectors (PDs) with external quantum efficiency approximately 80%, detectivity over 10(13) Jones, linear dynamic range over 120 dB, and dark current a few decades of nA/cm(2) were demonstrated. All these performance parameters were achieved by combined treatment of active layer with solvent vapor annealing and of polymer PDs with postproduction thermal annealing. These high performance parameters demonstrated that polymer PDs is comparable to or better than inorganic counterparts.

A surfactant-free recipe for shape-controlled synthesis of CdSe nanocrystals.

We described surfactant-free recipes for the synthesis of CdSe nanocrystals (NCs) with well-controlled morphologies at a relatively low temperature. Dot-, rod-, tetrapod-and sphere-shaped CdSe NCs were prepared with trioctylphosphine oxide (TOPO) as a non-equilibrium solvent and trioctylphosphine selenide (TOPSe) and cadmium carboxylates as Se and Cd precursors, respectively. It was found that the morphology and stacking pattern of the CdSe NCs were related to the preparation conditions such as the concentration of the injected TOPSe(monomer concentration), reaction temperature and chain length of the cadmium carboxylate precursors. At a reaction temperature of 240 °C, CdSe NCs with a tetrapod selectivity of up to 85% were obtained in the presence of cadmium myristate under high concentrated TOPSe injection, and the in situ-formed myristic acid supplied the best acidic ligand with optimal amount to stabilize the anisotropic growth of the tetrapods. The intentional addition of more myristic acid in the reaction system would block the growth pathway of the tetrapods. Using cadmium laurate, cadmium palmitate and cadmium stearate as the cadmium precursors would reduce the formation of the tetrapods, showing the very low selectivity of the tetrapods.