RÉSUMÉ
High-performance sodium-ion batteries (SIBs) require anode materials with high capacity and fast kinetics. Based on first-principles calculations, we propose BC3N2 and BC3N2/graphene (B/G) heterostructure as potential SIB anode materials. The BC3N2 monolayer exhibits intrinsic metallic behavior. In addition, BC3N2 possesses a low Na+ diffusion barrier (0.15 eV), a high storage capacity (777 mA h g-1), a low open-circuit voltage (0.72 V), and a tiny axial expansion (0.36%). Compared with the BC3N2 monolayer, the B/G heterostructure exhibits a lower diffusion barrier of 0.027 eV, suggesting a much faster diffusion. More importantly, although the B/G heterostructure possesses heavier molar weight, its theoretical capacity (689 mA h g-1) is comparable to that of the BC3N2 monolayer. Based on the above-mentioned properties, we hope both the BC3N2 monolayer and the B/G heterostructure would be promising anodes for SIBs.
RÉSUMÉ
Carbonaceous materials are promising candidates as anode materials for non-lithium-ion batteries (NLIBs) due to their appealing properties such as good electrical conductivity, low cost, and high safety. However, graphene, a classic two-dimensional (2D) carbon material, is chemically inert to most metal atoms, hindering its application as an electrode material for metal-ion batteries. Inspired by the unique geometry of a four-penta unit, we explore a metallic 2D carbon allotrope C5-10-16 composed of 5-10-16 carbon rings. The C5-10-16 monolayer is free from any imaginary frequencies in the whole Brillouin zone. Due to the introduction of a non-sp2 hybridization state into C5-10-16, the extended conjugation of π-electrons is disrupted, leading to the enhanced surface activity toward metal ions. We investigate the performance of C5-10-16 as the anode for sodium/potassium-ion batteries by using first-principles calculations. The C5-10-16 sheet has high theoretical specific capacities of Na (850.84 mA h g-1) and K (743.87 mA h g-1). Besides, C5-10-16 exhibits a moderate migration barrier of 0.63 (0.32) eV for Na (K), ensuring rapid charging/discharging processes. The average open-circuit voltages of Na and K are 0.33 and 0.62 V, respectively, which are within the voltage acceptance range of anode materials. The fully sodiated (potassiated) C5-10-16 shows tiny lattice expansions of 1.4% (1.3%), suggesting the good reversibility. Moreover, bilayer C5-10-16 significantly affects both the adsorption strength and the mobility of Na or K. All these results show that C5-10-16 could be used as a promising anode material for NLIBs.
RÉSUMÉ
INTRODUCTION: Regulatory T cells (Tregs) play important roles in tumor immunosuppression and immune escape. The aim of the present study was to construct a novel Tregs-associated biomarker for the prediction of tumour immune microenvironment (TIME), clinical outcomes, and individualised treatment in hepatocellular carcinoma (HCC). METHODS: Single-cell sequencing data were obtained from the three independent cohorts. Cox and LASSO regression were utilised to develop the Tregs Related Scoring System (TRSSys). GSE140520, ICGC-LIRI and CHCC cohorts were used for the validation of TRSSys. Kaplan-Meier, ROC, and Cox regression were utilised for the evaluation of TRSSys. The ESTIMATE, TIMER 2.0, and ssGSEA algorithm were utilised to determine the value of TRSSys in predicting the TIME. GSVA, GO, KEGG, and TMB analyses were used for mechanistic exploration. Finally, the value of TRSSys in predicting drug sensitivity was evaluated based on the oncoPredict algorithm. RESULTS: Comprehensive validation showed that TRSSys had good prognostic predictive efficacy and applicability. Additionally, ssGSEA, TIMER and ESTIMATE algorithm suggested that TRSSys could help to distinguish different TIME subtypes and determine the beneficiary population of immunotherapy. Finally, the oncoPredict algorithm suggests that TRSSys provides a basis for individualised treatment. CONCLUSIONS: TRSSys constructed in the current study is a novel HCC prognostic prediction biomarker with good predictive efficacy and stability. Additionally, risk stratification based on TRSSys can help to identify the TIME landscape subtypes and provide a basis for individualized treatment options.
Sujet(s)
Carcinome hépatocellulaire , Tumeurs du foie , Humains , Carcinome hépatocellulaire/thérapie , Lymphocytes T régulateurs , Tumeurs du foie/thérapie , Pronostic , Microenvironnement tumoral , Marqueurs biologiquesRÉSUMÉ
We propose a two-dimensional carbon allotrope (named KT-graphene) by incorporating kagome and tetragonal lattices consisting of trigonal, quadrilateral, octagonal, and dodecagonal rings. The introduction of non-hexagonal rings can give rise to the localized electronic states that improve the chemical reactivity toward potassium, making KT-graphene a high-performance anode material for potassium-ion batteries. It shows a high theoretical capacity (892 mAh g-1), a low diffusion barrier (0.33 eV), and a low average open-circuit voltage (0.51 V). The presence of electrolyte solvents is propitious to boost the K-ion adsorption and diffusion capabilities. Moreover, one-dimensional nanotubes (KT-CNTs), rolled up by the KT-graphene sheet, are metallic regardless of the tube diameter. As the curvature increases, KT-CNTs exhibit significantly increased surface activity, which can promote the electron-donating ability of K. Furthermore, the curvature effect greatly enhances the efficiency of K diffusion on the inner surface compared to that on the outer surface.
RÉSUMÉ
Multivalent-ion batteries have garnered significant attention due to their high energy density, low cost, and superior safety. Calcium-ion batteries (CIBs) are regarded as the next-generation energy storage systems for their abundant natural resources and bivalent characteristics. However, the absence of high-performance anode materials poses a significant obstacle to the progress of battery technology. Two-dimensional (2D) Dirac materials have excellent conductivity and abundant active sites, rendering them promising candidates as anode materials. A novel 2D Dirac material known as "graphene+" has been theoretically reported, exhibiting prominent properties including good stability, exceptional ductility, and remarkable electronic conductivity. By using first-principles calculations, we systematically investigate the performance of graphene+ as an anode material for CIBs. Graphene+ exhibits an ultra-high theoretical capacity (1487.7 mA h g-1), a small diffusion barrier (0.21 eV), and a low average open-circuit voltage (0.51 V). Furthermore, we investigate the impact of the electrolyte solvation on the performance of Ca-ion adsorption and migration. Upon contact with electrolyte solvents, graphene+ exhibits strong adsorption strength and rapid migration of Ca-ions on its surface. These results demonstrate the promising potential of graphene+ as a high-performance anode material for CIBs.
RÉSUMÉ
Lithium-ion batteries (LIBs) remain irreplaceable for clean energy storage applications. The intrinsic metallic nature of penta-SiCN ensures its promising application in the electrodes of LIBs. Using first-principles calculations, we evaluate the performance of the intrinsic metallic penta-SiCN monolayer as the anode material for LIBs. Penta-SiCN exhibits a low diffusion energy barrier (0.107 eV) for Li atom migration on Si18C18N18, while the diffusion energy barrier for vacancy migration on Li17Si18C18N18 is only 0.006 eV. Additionally, penta-SiCN possesses a high theoretical capacity of 1485.98 mA h g-1, average open-circuit voltage of 0.97 V, and small volume expansion of 1%. Remarkably, penta-SiCN exhibits robust wettability towards the electrolytes (solvent molecules and metal salts) widely used in commercial LIBs, indicating the excellent compatibility in electrode applications. These intriguing theoretical findings make penta-SiCN a high performance anode material for LIBs.
RÉSUMÉ
Sodium-ion batteries (SIBs) have attracted much attention due to their abundant earth-reserves and low cost. Two-dimensional (2D) Dirac materials show great application prospects as anodes for SIBs because of their excellent electronic conductivity. We explore the performances of AlB4 (Al2B2) monolayers and bilayers as anodes for SIBs by using first-principles calculations. The AlB4 (Al2B2) monolayer exhibits a high theoretical storage capacity of 954.15 (709.17) mA h g-1 and a low diffusion barrier of 0.36 (0.03) eV. The calculated average open-circuit voltage (0.68/0.18 V) falls within the acceptance range of 0.1-1.0 V for anode materials. The fully sodiated AlB4 (Al2B2) monolayer shows a tiny lattice expansion of 0.9% (2.4%), suggesting good reversibility. Furthermore, in comparison with the AlB4 (Al2B2) monolayer, the AlB4 (Al2B2) bilayer can provide stronger binding with Na on the outside surface. These results contribute to a better understanding of the AlB4 (Al2B2) monolayers and bilayers as potential high-performance anode materials for SIBs.
RÉSUMÉ
Two-dimensional (2D) carbon materials integrated with planar tetracoordinate carbon (ptC) and negative Poisson's ratio (NPR) provide a cornerstone for constructing multifunctional energy-storage devices. As a typical 2D carbon material, the pristine graphene is chemically inert, hindering its application in metal-ion batteries. Introducing the ptC in graphene can break the extended conjugation of π-electrons and lead to an enhanced surface reactivity. Inspired by the unique geometry of [4.6.4.6] fenestrane skeleton with ptC, we theoretically design a ptC-containing 2D carbon allotrope, namely THFS-carbon. It is intrinsically metallic with excellent dynamical, thermal, and mechanical stabilities. The Young's modulus along the x direction (311.37 N m-1) is comparable to that of graphene. Intriguingly, THFS-carbon possesses an in-plane half-NPR distinct from most other 2D crystals. As a promising anode for sodium-ion batteries, THFS-carbon delivers an ultra-high theoretical storage capacity (2233 mA h g-1), a low diffusion energy barrier (0.03-0.05 eV), a low open-circuit voltage (0.14-0.40 V), and a good reversibility for Na insertion/extraction.
RÉSUMÉ
Na-ion batteries (NIBs) have attracted a great deal of attention for large-scale electric energy storage due to their inherent safety, natural abundant resources, and low cost. The exploration of suitable anode materials is the major challenge in advancing NIB technology. On the basis of first-principles calculations, we systematically explore the potential performance of two-dimensional (2D) TiCl2 as an electrode material for NIBs. Monolayer TiCl2 can be easily exfoliated from the bulk structure with a small exfoliation energy of 0.64 J m-2. It shows good stability, as demonstrated by its high cohesive energy, positive phonon modes, and high thermal stability. Monolayer TiCl2 has high storage capacity (451.3 mA h g-1), low diffusion energy barrier (0.02-0.14 eV), moderate average open-circuit voltage (0.81 V), and small lattice change (2.37%). Moreover, bilayer TiCl2 can significantly enhance the Na adsorption strength but reduce the Na-ion diffusion ability. These results suggest that TiCl2 is a promising anode candidate for NIBs.
RÉSUMÉ
High specific capacity and fast charge/discharge rate are important indicators for the development of next-generation ion batteries. Compared with conventional monovalent ion batteries like lithium-ion batteries and sodium-ion batteries, multivalent ion batteries have attracted extensive attention owing to their high energy densities. Here, we systematically explore the interactions between Mg atoms and α-beryllene monolayers by means of density functional theory calculations. Mg atoms can be adsorbed stably on α-beryllene monolayers with the adsorption energy of -0.24 eV. The low diffusion energy barriers (0.099/0.101 eV) indicate the rapid mobility of Mg during the charge/discharge process. Moreover, the α-beryllene monolayer exhibits an ultra-high theoretical specific capacity of 5956 mA h g-1 for Mg, a low average open-circuit voltage of 0.24 V, and a tiny volume change of -1.08%. Finally, the constructed h-BN/α-beryllene heterostructure shows that h-BN can serve as a protective cover to preserve pristine α-beryllene in respect of metallicity, Mg adsorption capability, and fast ionic mobility. The above mentioned outstanding results make α-beryllene a promising anode material for magnesium-ion batteries.
RÉSUMÉ
Background: Human leukocyte antigen (HLA) is associated with drug-induced cutaneous adverse reactions, including antiepileptic drugs (AEDs). HLA gene polymorphism has a regional discrepancy, and it is therefore important to study it in different populations. Objective: To investigate the role of HLA in AED-induced mild cutaneous adverse drug reactions (cADRs) in a Northeast Han Chinese population. Methods: A case-control study was performed in the First Hospital of Jilin University between August 2016 and March 2017. In total, 26 patients with mild cADRs induced by AEDs and 23 AED-tolerant control patients were included. Sequence-based typing (SBT) was used to detect HLA-A and HLA-B genotypes. Differences in genotype frequencies between groups were assessed using Fisher's exact test. Results: In the mild cADRs group, 22 patients (84.6%) presented with maculopapular exanthema (MPE) and four patients (15.4%) presented with an isolated itch. The median duration between the AED exposure and cADRs was 7.5 days (IQR, 3 - 14 days). We failed to find statistically significant differences in HLA alleles between the cADRs group and the control group when considering all the drugs included in our study together or when considering oxcarbazepine (OXC), carbamazepine (CBZ), and levetiracetam (LEV) alone (P > 0.05). Conclusions: Our findings indicated that there was no correlation between HLA alleles and AED-induced mild cADRs in the Northeast Han Chinese population.
Sujet(s)
Anticonvulsivants , Humains , Anticonvulsivants/effets indésirables , Allèles , Études cas-témoins , Oxcarbazépine/effets indésirables , Génotype , ChineRÉSUMÉ
Background: Necroptosis is a form of programmed cell death, and studies have shown that long non-coding RNA molecules (lncRNAs) can regulate the process of necroptosis in various cancers. We sought to screen lncRNAs associated with necroptosis to predict prognosis and tumor immune infiltration status in patients with hepatocellular carcinoma (HCC). Methods: Transcriptomic data from HCC tumor samples and normal tissues were extracted from The Cancer Genome Atlas database. Necroptosis-associated lncRNAs were obtained by co-expression analysis. Necroptosis-associated lncRNAs were then screened by Cox regression and least absolute shrinkage and selection operator methods to construct a risk model for HCC. The models were also validated and evaluated by Kaplan-Meier analysis, univariate and multivariate Cox regression, and time-dependent receiver operating characteristic (ROC) curves. In addition, Gene Ontology, Kyoto Encyclopedia of Genes and Genomes enrichment, gene set enrichment, principal component, immune correlation, and drug sensitivity analyses were applied to assess model risk groups. To further differentiate the immune microenvironment of different HCC subtypes, the entire dataset was divided into three clusters, based on necroptosis-associated lncRNAs, and a series of analyses performed. Results: We constructed a model comprising four necroptosis-associated lncRNAs: POLH-AS1, DUXAP8, AC131009.1, and TMCC1-AS1. Overall survival (OS) duration was significantly longer in patients classified as low-risk than those who were high-risk, according to our model. Univariate and multivariate Cox regression analyses further confirmed risk score stability. The analyzed models had area under the ROC curve values of 0.786, 0.713, and 0.639 for prediction of 1-, 3-, and 5-year OS, respectively, and risk score was significantly associated with immune cell infiltration and ESTIMATE score. In addition, differences between high and low-risk groups in predicted half-maximal inhibitory concentration values for some targeted and chemical drugs, providing a potential basis for selection of treatment approach. Finally, cluster analysis facilitated more refined differentiation of the immune microenvironment in patients with HCC and may allow prediction of the effectiveness of immune checkpoint inhibitors. Conclusions: This study contributes to understanding of the function of necroptosis-related lncRNAs in predicting the prognosis and immune infiltration status of HCC. The risk model constructed and cluster analysis provide a basis for predicting the prognosis of patients with HCC and to inform the selection of immunotherapeutic strategies.
RÉSUMÉ
Background: We aimed to estimate the incidence, mortality, disability-adjusted life years (DALYs) for chronic obstructive pulmonary disease (COPD) in 204 countries and territories. We examined the variations in these trends by country, gender, age group, and sociodemographic index (SDI). Methods: We calculated the estimated annual percentage changes (EAPCs) to assess temporal trends in the age-standardized incidence rate, age-standardized mortality rate, and age-standardized DALYs of COPD from 1990 to 2019. Results: From 1990 to 2019, the COPD incidence and COPD-associated deaths and DALYs increased worldwide by 86%, 30%, and 26%, respectively. From 1990 to 2019, the global age-standardized incidence rate (EAPC, -0.11; 95% confidence interval (CI), -0.25 to 0.04), age-standardized mortality rate (EAPC, -2.10; 95% CI, -2.19 to -2.00), and age-standardized DALYs (EAPC, -1.87; 95% CI, -1.94 to -1.81) of COPD decreased. The age-standardized incidence of COPD increased most in areas with high SDI (EAPC 0.56). The largest increases in the age-standardized incidence rate of COPD were recorded in High-income North America (EAPC, 1.41), Southern Latin America (EAPC, 0.29), and North Africa and the Middle East (EAPC, 0.09). The three countries that recorded the largest increases in COPD incidence from 1990 to 2019 were the United States of America (EAPC, 1.51), Saudi Arabia (EAPC, 1.17), and Oman (EAPC, 1.10). Conclusion: Despite the decreased burden of COPD globally from 1990 to 2019, the age-standardized incidence rate of COPD increased in areas with high SDI, High-income North America, Southern Latin America, North Africa, and the Middle East.
RÉSUMÉ
Two-dimensional (2D) materials provide tremendous opportunities for next-generation energy storage technologies. We theoretically propose 2D group-IV oxides (α-, ß-, andγ-CXO, X = Si/Ge). Among them,α-CXO monolayers, composed of the C-O-X skeleton of silyl (germyl) methyl ether molecules, are the most stable phase.α-CXO possess robust dynamical, mechanical, and thermal stabilities. Remarkably,α-CGeO has an unusual negative Poisson's ratio (NPR). However,α-CSiO displays a bidirectional half-auxeticity, different from all the already known NPR behaviors. The intrinsic moderate direct-band-gap, high carrier mobility, and superior optical absorption ofα-CXO make them attractive for optoelectronics applications. A series ofα-CXO-based excitonic solar cells can achieve high power conversion efficiencies. Besides,α-CXO monolayers are promising anode materials for sodium- and potassium-ion batteries, exhibiting not only the high specific capacity (532-1433 mA h g-1) but also low diffusion barrier and open-circuit voltage. In particular, the specific capacity of K onα-CSiO exhibits one of the highest values ever recorded in 2D materials. The multifunctionality rendersα-CXO promising candidates for nanomechanics, nanoelectronics, and nano-optics.
RÉSUMÉ
Sodium-ion batteries (SIBs) have attracted great attention owing to their low cost and inherent safety. High-performance anode materials for SIBs should possess intrinsically metallic characteristic and be composed of non-toxic, earth abundant, and lightweight elements. We predict a two-dimensional Mg material (named magnesene) to be an excellent anode material, which can meet these design requirements. It is demonstrated to be stable in terms of the cohesive energy, phonon spectrum, ab initio molecular dynamics simulation, and elastic constants. The magnesene monolayer exhibits good SIB performances, including a high storage capacity of 551.3 mA h g-1, low diffusion energy barrier (0.16-0.19 eV), low open-circuit voltage (0.71-0.82 V), and small volume change (4.7%). Moreover, graphene or h-BN on top of magnesene could serve as a protective cover to preserve the performances of pristine magnesene, such as metallicity, strong Na adsorption capability, and fast ionic mobility. These intriguing theoretical findings make magnesene a promising anode material for SIBs.
RÉSUMÉ
Pristine germanene is a zero-gap semi-metal, which may hinder its practical application in semiconducting devices. Here, on the basis of the structural characteristics of digermyl ether, we theoretically design a two-dimensional crystal, namely germanether. Germanether exhibits excellent dynamical and thermal stability. It possesses an indirect band gap of 1.37 eV and a high electron mobility of 2.32 × 103 cm2 V-1 s-1. The uniaxial strain and layer stacking order can trigger an indirect-to-direct band gap transition. More interestingly, germanether has remarkable in-plane negative Poisson's ratios with the largest one (â¼-0.2) five times of borophenes and three times of penta-graphene. The negative Poisson's ratio arises from the interplay of Ge-O tetrahedron symmetry and Ge-4d orbitals involvement, which is different from previously reported auxetic materials. All these findings render germanether is a competitive material for the future application in nanomechanics and nanoelectronics.
RÉSUMÉ
Sodium-ion batteries (SIBs) have been attracting great attention as the most promising alternative to lithium-ion batteries (LIBs) for large-scale energy storage. However, the absence of suitable anode materials is the main bottleneck for the commercial application of SIBs. Herein, the adsorption and diffusion behaviors of Na on graphether are predicted by first-principles density functional calculations. Our results show that Na atoms can be adsorbed on graphether forming a uniform and stable coverage on both sides. Even at low intercalated Na concentrations, the semiconducting graphether can be changed to a metallic state, ensuring good electrical conductivity. Due to the structural anisotropy of graphether, the Na+ ions show a remarkable one-dimensional diffusion with an ultralow energy barrier of 0.04 eV, suggesting ultrafast charge/discharge characteristics. The graphether monolayer has a high theoretical specific capacity of 670 mA h g-1, which is much higher than commercial graphite anode materials. Furthermore, the average voltage is 1.58 V, comparable with that of commercial TiO2 anode materials for LIBs (1.5 V). During the charge/discharge process, graphether could mostly preserve the structural integrity upon the adsorption of Na even at the maximum concentration, suggesting its good reversibility. All these results show that graphether is a promising anode material for high-performance SIBs.
RÉSUMÉ
Searching for high-performance electrode materials is an important topic in rechargeable batteries. Using first-principles calculations, we systematically explore the potential application of a two-dimensional BP2 monolayer as a cathode material for Li-ion and Na-ion batteries. The pristine BP2 monolayer exhibits metallic characteristics, which facilitate the transportation of electrons. The Li and Na atoms bind strongly to the BP2 monolayer, indicating a good structural stability. Furthermore, the geometrical structure of BP2 is well maintained during the adsorption process. The Li and Na ions prefer to move along the zigzag direction with relatively low energy barriers. Especially, the ultralow Na diffusion barrier (0.03 eV) implies that monolayer BP2 has an excellent charge/discharge capability. The specific capacity and average electrode potential of Li (Na) are 619.45 (279.93) mA h g-1 and 2.89 (2.49) V, respectively. These results reveal that the BP2 monolayer is an appealing cathode material for alkali-metal batteries.
RÉSUMÉ
OBJECTIVE: Gastric mucosa-associated lymphoid tissue lymphoma is a rare disease, which is associated with a low endoscopic diagnostic accuracy even on tissue biopsy. We aimed to establish a diagnostic process system (M-system) using detailed magnifying endoscopy images to improve the diagnostic efficiency of this disease. METHODS: First, 34 cases from 16 patients with the diagnosis of mucosa-associated lymphoid tissue lymphoma were collected as the study group. The control group included randomly selected patients who were diagnosed with early differentiated carcinoma, undifferentiated carcinoma or inflammation. Then, the endoscopic images of these patients were analyzed by senior physicians. Finally, the M-system was established based on the data extracted from the images reviewed, and its diagnostic efficiency for mucosa-associated lymphoid tissue lymphoma was validated by the junior physicians. RESULTS: A series of elements with high sensitivity and specificity for the diagnosis of mucosa-associated lymphoid tissue lymphoma on endoscopic images were extracted for the establishment of the M-system. Using the M-system, the diagnostic accuracy, sensitivity, specificity and correct indices of mucosa-associated lymphoid tissue lymphoma rose from 65.4 to 79.4%, 41.2 to 76.5%, 73.5 to 80.4% and 0.147 to 0.569%, respectively, all of which were statistically significant. CONCLUSIONS: The M-system can improve the diagnostic accuracy of mucosa-associated lymphoid tissue lymphoma of the superficial-spreading type on detailed magnifying endoscopy. This would help in the early diagnosis of the disease and treatment, which would translate into improved clinical outcomes.