RÉSUMÉ
In Human-Robot Interaction (HRI), accurate 3D hand pose and mesh estimation hold critical importance. However, inferring reasonable and accurate poses in severe self-occlusion and high self-similarity remains an inherent challenge. In order to alleviate the ambiguity caused by invisible and similar joints during HRI, we propose a new Topology-aware Transformer network named HandGCNFormer with depth image as input, incorporating prior knowledge of hand kinematic topology into the network while modeling long-range contextual information. Specifically, we propose a novel Graphformer decoder with an additional Node-offset Graph Convolutional layer (NoffGConv). The Graphformer decoder optimizes the synergy between the Transformer and GCN, capturing long-range dependencies and local topological connections between joints. On top of that, we replace the standard MLP prediction head with a novel Topology-aware head to better exploit local topological constraints for more reasonable and accurate poses. Our method achieves state-of-the-art 3D hand pose estimation performance on four challenging datasets, including Hands2017, NYU, ICVL, and MSRA. To further demonstrate the effectiveness and scalability of our proposed Graphformer Decoder and Topology aware head, we extend our framework to HandGCNFormer-Mesh for the 3D hand mesh estimation task. The extended framework efficiently integrates a shape regressor with the original Graphformer Decoder and Topology aware head, producing Mano parameters. The results on the HO-3D dataset, which contains various and challenging occlusions, show that our HandGCNFormer-Mesh achieves competitive results compared to previous state-of-the-art 3D hand mesh estimation methods.
RÉSUMÉ
To overcome the shortcomings of traditional extraction methods, such as long extraction time and low efficiency, and considering the low content and high complexity of total flavonoids in Artemisia absinthium L., in this experiment, we adopted ultrasound-assisted enzymatic hydrolysis to improve the yield of total flavonoids, and combined this with molecular docking and network pharmacology to predict its core constituent targets, so as to evaluate its antitumor activity. The content of total flavonoids in Artemisia absinthium L. reached 3.80 ± 0.13%, and the main components included Astragalin, Cynaroside, Ononin, Rutin, Kaempferol-3-O-rutinoside, Diosmetin, Isorhamnetin, and Luteolin. Cynaroside and Astragalin exert their cervical cancer inhibitory functions by regulating several signaling proteins (e.g., EGFR, STAT3, CCND1, IGFIR, ESR1). Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analysis showed that the anticancer activity of both compounds was associated with the ErbB signaling pathway and FoxO signaling pathway. MTT results showed that total flavonoids of Artemisia absinthium L. and its active components (Cynaroside and Astragalin) significantly inhibited the growth of HeLa cells in a concentration-dependent manner with IC50 of 396.0 ± 54.2 µg/mL and 449.0 ± 54.8 µg/mL, respectively. Furthermore, its active components can mediate apoptosis by inducing the accumulation of ROS.
Sujet(s)
Artemisia absinthium , Humains , Cellules HeLa , Simulation de docking moléculaire , Flavonoïdes/pharmacologie , Antioxydants/pharmacologie , ProtéinesRÉSUMÉ
Background: Zoonotic Babesia infections are an emerging public health threat globally. The geographical distribution, animal reservoirs and tick vectors vary greatly across Babesia species, and estimations of prevalence reported in works within the literature are also quite different. Better prevalence estimates and identification of moderators are needed to understand the global transmission risk of different zoonotic Babesia species, and to provide crucial background information for the diagnosis, treatment and control of zoonotic babesiosis. Methods: We conducted a systematic review and meta-analysis to determine the global nucleic acid prevalence of different zoonotic Babesia species in humans, animals and ticks. Relevant publications were obtained from several electronic databases and grey literature up to December 2021. Articles were included if they were published in English or Chinese and reported the nucleic acid prevalence of zoonotic Babesia species in humans, animals or ticks. The pooled estimates of prevalence were determined using a random effect model. Heterogeneity was investigated using subgroup analyses and random effect meta-regression models. Results: Of 3205 unique studies, 28 were included by the systematic review of zoonotic Babesia for humans, 79 for animals and 104 for ticks. The results showed overall pooled estimates of nucleic acid prevalence for the following: B. microti-1.93% (0.32-4.69%) in humans; B. microti-7.80% (5.25-10.77%), B. divergens-2.12% (0.73-4.08%) and B. venatorum-1.42% (0.30-3.16%) in animals; and B. microti-2.30% (1.59-3.13%), B. divergens-0.16% (0.05-0.32%), and B. venatorum-0.39% (0.26-0.54%) in questing ticks. The type of population, animal reservoir or tick vector, detecting method and continent were moderators possibly associated with heterogeneity, yet the remaining heterogeneity that was not explained was still substantial (all QE p values < 0.05). Conclusions:B. microti is the most prevalent and widely distributed zoonotic Babesia species globally. The wide range of suitable animal reservoirs and potential transmission vectors and high prevalence in animals and ticks may contribute to the worldwide distribution of B. microti. Other zoonotic Babesia species were relatively less prevalent and were reported in quite limited areas.
RÉSUMÉ
Background: Cisplatin (DDP) is among the most widely used chemotherapeutic drugs for non-small cell lung cancer (NSCLC), yet the frequent emergence of chemoresistance serves as a major barrier to the treatment of this tumor type. Long non-coding RNAs (lncRNAs) have recently been shown to influence the ability of cells to resist particular chemotherapy drugs. The present study was developed to explore the role of the lncRNA SNHG7 as a regulator of NSCLC cell chemosensitivity. Methods: Quantitative real-time polymerase chain reaction (qRT-PCR) was employed to measure SNHG7 expression in NSCLC tissues from patients that were sensitive/resistant to DDP, correlations between SNHG7 expression levels and the patients' clinicopathological characteristics were assessed, and the prognostic relevance of SNHG7 expression was examined via the Kaplan-Meier approach. In addition, SNHG7 expression was assessed in NSCLC cell lines that were DDP-sensitive or -resistant, while western blotting and immunofluorescence staining were employed to detect autophagy-associated protein expression in A549, A549/DDP, HCC827, and HCC827/DDP cells. NSCLC cell chemoresistance was quantified via the Cell Counting Kit-8 (CCK-8) assay approach, and flow cytometry was used to detect the apoptotic death of these tumor cells. The chemosensitivity of xenograft tumors in vivo was further assessed to validate the functional importance of SNHG7 as a regulator of NSCLC DDP resistance. Results: Relative to paracancerous tissues, NSCLC tumors exhibited SNHG7 upregulation, and this lncRNA was further upregulated in DDP-resistant patients compared to chemosensitive patients. Consistently, higher SNHG7 expression levels were correlated with worse patient survival outcomes. DDP-resistant NSCLC cells were also found to exhibit higher levels of SNHG7 expression than chemosensitive cells, and knocking down this lncRNA enhanced the sensitivity of these cells to DDP treatment, resulting in impaired proliferation and higher rates of apoptotic death. Knocking down SNHG7 was also sufficient to suppress microtubule associated protein 1 light chain 3 beta (LC3B) and Beclin1 protein levels and promote p62 upregulation in vitro. The silencing of this lncRNA additionally inhibited the resistance of NSCLC xenograft tumors to DDP treatment in vivo. Conclusions: SNHG7 can promote malignant behaviors and DDP resistance in NSCLC cells at least partly via the induction of autophagic activity.
RÉSUMÉ
BACKGROUND: Circular RNAs (circRNAs) are important regulators of the development and progression of non-small-cell lung cancer (NSCLC) and many other malignancies. The functional importance of circ_0009043 in NSCLC, however, has yet to be established. METHODS: The expression of circ_0009043, miR-148a-3p, and DnaJ heat shock protein family (Hsp40) member B4 (DNAJB4) in NSCLC cells was assessed via qPCR. The proliferative activity of these cells was examined through EdU uptake and CCK-8 assays, while flow cytometry approaches were used to examine apoptotic cell death rates. Protein expression was measured through Western immunoblotting. Interactions between miR-148a-3p and circ_0009043 or DNAJB4 were detected through RNA immunoprecipitation (RIP) and dual-luciferase reporter assays. The in vivo importance of circ_0009043 as a regulator of oncogenic activity was assessed using murine xenograft models. RESULTS: Both NSCLC cells and tissue samples were found to exhibit circ_0009043 upregulation, and lower circ_0009043 expression levels were found to be related to poorer NSCLC patient overall survival. Knocking down circ_0009043 resulted in the enhancement of NSCLC cell proliferative activity and the suppression of apoptotic tumor cell death in vitro, while also driving more rapid in vivo tumorigenesis. Mechanistically, circ_0009043 was found to function as a molecular sponge that sequestered miR-148a-3p, which was in turn able to directly suppress DNAJB4 expression. When miR-148a-3p was overexpressed, this reversed the impact of knocking down circ_0009043 on the apoptotic death and proliferation of NSCLC cells. Conversely, miR-148a-3p inhibition resulted in the suppression of NSCLC cell apoptosis and the enhancement of tumor cell growth, while the downregulation of DNAJB4 reversed these changes. CONCLUSION: Circ_0009043 acts as a tumor suppressor in NSCLC cells, promoting DNAJB4 upregulation via the sequestration of miR-148a-3p.
RÉSUMÉ
The rapid pace of innovations and the frequency of replacement of electrical and electronic equipment has made waste printed circuit boards (WPCB) one of the fastest growing waste streams. The frequency of replacement of equipment can be caused by a limited time of proper functioning and increasing malfunctions. Resource utilization of WPCBs have become some of the most profitable companies in the recycling industry. To facilitate WPCB recycling, several advanced technologies such as pyrometallurgy, hydrometallurgy and biometallurgy have been developed. Bioleaching uses naturally occurring microorganisms and their metabolic products to recover valuable metals, which is a promising technology due to its cost-effectiveness, environmental friendliness, and sustainability. However, there is sparse comprehensive research on WPCB bioleaching. Therefore, in this work, a short review was conducted from the perspective of potential microorganisms, bioleaching mechanisms and parameter optimization. Perspectives on future research directions are also discussed.
Sujet(s)
Déchets électroniques , Déchets électroniques/analyse , Électronique , Métaux/métabolisme , RecyclageRÉSUMÉ
Separating cathode material and Al foil from spent lithium-ion batteries (LIBs) is a critical step for LIBs recycling. As compared to chemical dissolving and decomposition, the pyrolysis pretreatment is an alternative and simple method. In this work, the pyrolysis kinetics of cathode material were comparatively studied using various isoconversional methods, including Flynn-Wall-Ozawa (FWO), Friedman, Kissinger-Akahira-Sunose, Starink, Tang, and Boswell. The thermal degradation mechanism was investigated by the Coats-Redfern (CR) and master-plot methods as well. The thermogravimetric analysis revealed that cathode material decomposition could be divided into three stages with mass losses of 1.51%, 0.787%, and 0.449%, respectively. Activation energy (Eα) calculated using the six model-free methods showed a similar trend, gradually increasing as the degree of conversion (α) increased from 0.001 to 0.009, and then significantly elevating. The FWO method gave the best fitting and Eα values first increased from 12.032 to 24.433 kJ·mol-1 with α elevating from 0.001 to 0.009, then increased further to 43.187 kJ·mol-1. Both CR and Criado methods indicated that the degradation of cathode material can be explained by the diffusion models.Implications: The rapid growth in the production and consumption of lithium-ion batteries (LIBs) for portable electronic devices and electric vehicles has resulted in an increasing number of spent LIBs. Thermal treatment offers advantages of high-efficiency and simple operation. Understanding the thermal process of spent LIBs and probing its kinetic are significant for the large-scale treatment. Through this study, it will be significant for the reactor designing and optimizing in practice.
RÉSUMÉ
The waste from end-of-life electrical and electronic equipment has become the fastest growing waste problem in the world. The difficult-to-treat waste-printed circuit boards (WPCBs), which are nearly 3-6 wt % of the total electronic waste, generate great environmental concern nowadays. For WPCB treatment and recycling, the mechanical-physical method has turned out to be more technologically and economically feasible. In this work, the mechanical-physical treatment and recycling technologies for WPCBs were investigated, and future research was directed as well. Removing electric and electronic components (EECs) from WPCBs is critical for their crushing and metal recovery; however, environmentally friendly and high-efficiency removal techniques need be developed. Concentrated metals rich in Cu, Al, Au, Pb, and Sn recovered from WPCBs need be further refined to add to their economic values. The low value-added nonmetallic fraction of waste-printed circuit boards (NMF-WPCBs) accounts for approximately 60 wt % of the WPCBs. From the perspective of environmental management, a zero-waste approach to recycling them should be developed to gain values. Preparing polymer composites and geopolymers offers many advantages and has potential applications in various fields, especially as construction and building materials. However, the mechanical and thermal properties of NMF-WPCBs composites should be further improved for preparing polymer composites. Surface modification or filler blending could be applied to improve the interfacial comparability between NMF-WPCBs and the polymer matrix. The NMF-WPCBs shows potential in preparing cement mortar and geological polymers, but the environmental safety resulting from metals needs to be taken into account. This study will provide a significant reference for the industrial recycling of NMF-WPCBs.
RÉSUMÉ
Thermal treatment offers an alternative method for the separation of Al foil and cathode materials during spent lithium-ion batteries (LIBs) recycling. In this work, the pyrolysis behavior of cathode from spent LIBs was investigated using advanced thermogravimetric Fourier transformed infrared spectroscopy coupled with gas chromatography-mass spectrometer (TG-FTIR-GC/MS) method. The fate of fluorine present in spent batteries was probed as well. TG analysis showed that the cathode decomposition displayed a three-stage process. The temperatures of maximum mass loss rate were located at 470 °C and 599 °C, respectively. FTIR analysis revealed that the release of CO2 increased as the temperature rose from 195 to 928 °C. However, the evolution of H2O showed a decreasing trend when the temperature increased to above 599 °C. The release of fluoride derivatives also exhibited a decreasing trend, and they were not detected after temperatures increasing to above 470 °C. GC-MS analysis indicated that the release of H2O and CO displayed a similar trend, with larger releasing intensity at the first two stages. The evolution of 1,4-difluorobenzene and 1,3,5-trifluorobenzene also displayed a similar trend-larger releasing intensity at the first two stages. However, the release of CO2 showed a different trend, with the largest release intensity at the third stage, as did the release of 1,2,4-trifluorobenzene, with the release mainly focused at the temperature of 300-400 °C. The release intensities of 1,2,4-trifluorobenzene and 1,3,5-trifluorobenzene were comparable, although smaller than that of 1,4-difluorobenzene. This study will offer practical support for the large-scale recycling of spent LIBs.
Sujet(s)
Lithium , Pyrolyse , Alimentations électriques , Électrodes , Chromatographie gazeuse-spectrométrie de masse , Recyclage , Spectroscopie infrarouge à transformée de FourierRÉSUMÉ
Advanced thermal treatment of electronic waste offers advantages of volume reduction and energy recovery. In this work, the pyrolysis behaviour of nonmetallic fractions of waste printed circuit boards was studied. The fate of a bromine and thermal decomposition pathway of nonmetallic fractions of waste printed circuit boards were further probed. The thermogravimetric analysis showed that the temperatures of maximum mass loss were located at 319°C and 361°C, with mass loss of 29.6% and 50.6%, respectively. The Fourier transform infrared Spectroscopy analysis revealed that the spectra at temperatures of 300°C-400°C were complicated with larger absorbance intensity. The nonmetallic fractions of waste printed circuit boards decomposed drastically and more evolved products were detected in the temperature range of 600°C-1000°C. The gas chromatography-mass spectrometry analysis indicated that various brominated derivates were generated in addition to small molecules, such as CH4, H2O and CO. The release intensity of CH4 and H2O increased with temperature increasing and reached maximum at 600°C-800°C and 400°C-600°C. More bromoethane (C2H5Br) was formed as compared with HBr and methyl bromide (CH3Br). The release intensity of bromopropane (C3H7Br) and bromoacetone (C3H5BrO) were comparable, although smaller than that of bromopropene (C3H5Br). More dibromophenol (C6H4Br2O) was released than that of bromophenol (C6H5BrO) in the thermal treatment. During the thermal process, part of the ether bonds first ruptured forming bisphenol A, propyl alcohol and tetrabromobisphenol A. Then, the tetrabromobisphenol A decomposed into C6H5BrO and HBr, which further reacted with small molecules forming brominated derivates. It implied debromination of raw nonmetallic fractions of waste printed circuit boards or pyrolysis products should be applied for its environmentally sound treating.
Sujet(s)
Brome , Déchets électroniques , Déchets électroniques/analyse , Pyrolyse , Recyclage , TempératureRÉSUMÉ
In this study, the pyrolysis behaviour of nonmetal fraction of waste printed circuit boards (NMF-WPCBs) was studied based on five model-free methods and distributed activation energy model (DAEM). The possible decomposition mechanism was further probed using the Criado method. Thermogravimetric analysis indicated that the NMF-WPCBs pyrolysis process could be divided into three stages with temperatures of 37-330°C, 330-380°C and 380-1000°C. The mass loss at different heating rate was determined as 26.85-29.98%, 13.47-24.21% and 20.43-23.36% for these stages, respectively. The activation energy (Eα) from various model-free methods first increased with degree of conversion (α) increasing from 0.05 to 0.275, and then decreased beyond this range. The coefficient (R) from the Flynn-Wall-Ozawa (FWO) method was higher, and the resulting Eα fell into the range of 214.947-565.660 kJ mol-1. For the DAEM method, the average Eα value was determined as 337.044 kJ mol-1, comparable with 329.664 kJ mol-1 from the FWO method. The thermal decomposition kinetics of NMF-WPCBs could be better described by the second-order reaction.
Sujet(s)
Chauffage , Pyrolyse , Cinétique , Température , ThermogravimétrieRÉSUMÉ
In this work, the pyrolysis behavior of plastic waste-TV plastic shell-was investigated, based on thermogravimetric analysis and using a combination of model-fitting and model-free methods. The possible reaction mechanism and kinetic compensation effects were also examined. Thermogravimetric analysis indicated that the decomposition of plastic waste in a helium atmosphere can be divided into three stages: the minor loss stage (20-300°C), the major loss stage (300-500°C) and the stable loss stage (500-1000°C). The corresponding weight loss at three different heating rates of 15, 25 and 35 K/min were determined to be 2.80-3.02%, 94.45-95.11% and 0.04-0.16%, respectively. The activation energy (Ea) and correlation coefficient (R2) profiles revealed that the kinetic parameters calculated using the Friedman and Kissinger-Akahira-Sunose method displayed a similar trend. The values from the Flynn-Wall-Ozawa and Starink methods were comparable, although the former gave higher R2 values. The Eα values gradually decreased from 269.75 kJ/mol to 184.18 kJ/mol as the degree of conversion (α) increased from 0.1 to 0.8. Beyond this range, the Eα slightly increased to 211.31 kJ/mol. The model-fitting method of Coats-Redfern was used to predict the possible reaction mechanism, for which the first-order model resulted in higher R2 values than and comparable Eα values to those obtained from the Flynn-Wall-Ozawa method. The pre-exponential factors (lnA) were calculated based on the F1 reaction model and the Flynn-Wall-Ozawa method, and fell in the range 59.34-48.05. The study of the kinetic compensation effect confirmed that a compensation effect existed between Ea and lnA during the plastic waste pyrolysis.
Sujet(s)
Matières plastiques , Pyrolyse , Chauffage , Cinétique , ThermogravimétrieRÉSUMÉ
Thermal treatment offers an alternative method for the separation of aluminum foil and cathode materials during spent lithium-ion batteries recycling. In this work, the combustion kinetic of cathode was studied based on six model-free (isoconversional) methods, namely Flynn-Wall-Ozawa (FWO), Friedman, Kissinger-Akahira-Sunose, Starink, Tang, and Boswell methods. The possible decomposition mechanism was also probed using a master-plots method (Criado method). Thermogravimetric analysis showed that the whole thermal process could be divided into three stages with temperatures of 37-578°C, 578-849°C, and 849-1000°C. The activation energy (Eα) derived from these model-free methods displayed the same trend, gradually increasing with a conversion range of 0.002-0.013, and significantly elevating beyond this range. The coefficients from the FWO method were larger, and the resulted Eα fell into the range of 10.992-40.298 kJ/mol with an average value of 20.228 kJ/mol. Comparing the theoretical master plots with an experimental curve, the thermal decomposition of cathode could be better described by the geometric contraction models.
Sujet(s)
Alimentations électriques , Lithium , Électrodes , Cinétique , ThermogravimétrieRÉSUMÉ
Thermal treatment offers advantages of significant volume reduction and energy recovery for the polyurethane foam from waste refrigerators. In this work, the pyrolysis kinetics of polyurethane foam was investigated using the model-fitting, model-free and distributed activation energy model methods. The thermogravimetric analysis indicated that the polyurethane foam decomposition could be divided into three stages with temperatures of 38°C-400°C, 400°C-550°C and 550°C-1000°C. Peak temperatures for the major decomposition stage (<400°C) were determined as 324°C, 342°C and 344°C for heating rates of 5, 15 and 25 K min-1, respectively. The activation energy (Eα) from the Friedman, Flynn-Wall-Ozawa and Tang methods increased with degree of conversion (α) in the range of 0.05 to 0.5. The coefficients from the Flynn-Wall-Ozawa method were larger and the resulted Eα values fell into the range of 163.980-328.190 kJ mol-1 with an average of 206.099 kJ mol-1. For the Coats-Redfern method, the diffusion models offered higher coefficients, but the E values were smaller than that from the Flynn-Wall-Ozawa method. The Eα values derived from the distributed activation energy model method were determined as 163.536-334.231 kJ mol-1, with an average of 206.799 kJ mol-1. The peak of activation energy distribution curve was located at 205.929 kJ mol-1, consistent with the thermogravimetric results. The Flynn-Wall-Ozawa and distributed activation energy model methods were more reliable for describing the polyurethane foam pyrolysis process.
Sujet(s)
Chauffage , Pyrolyse , Cinétique , Polyuréthanes , ThermogravimétrieRÉSUMÉ
Shellfish cultivation is an expanding economic activity worldwide. However, the rapid development of crab farming and processing result in a large number of crab shells (CS). Utilizing CS could not only benefit the environment and economy but also promote the sustainable development of aquaculture. In this work, it reviews and analyzes recent attempts in CS recycling, including extracting chitin and its derivatives, for use as adsorbent and flocculant and for preparing polymer composites and catalysts, as well as medical applications. The challenges in these utilizations are discussed, and future research directions are proposed as well. Extracting chitin and its derivates, for use as adsorbent and flocculant, are recent major recycling approaches. Preparing polymer composites and carbon materials has gained more and more attentions. Biotechnology is an alternative method for extracting chitin and its derivates from CS, and high-efficiency desalted and deproteinized bacteria need to be screened. Immobilizing the CS-based adsorbents is the key of treating wastewater in continuous systems. Using CS as a biofiller to prepare polymer composites is promising, and surface modification to improve the interfacial compatibility between CS-based fillers and matrix needs to be further studied.
Sujet(s)
Brachyura/composition chimique , Chitine/analyse , Animaux , Aquaculture , Bactéries , Matériaux biocompatibles , Biotechnologie , Chitine/composition chimique , RecyclageRÉSUMÉ
In this work, the combustion and pyrolysis characteristics of a waste TV plastic shell sample were investigated using a powerful Thermogravimetric-Fourier Infrared Spectrum-Mass Spectrum (TG-FTIR-MS) technique. The decomposition mechanisms of plastic waste and fate of bromines in both thermal processes were probed as well. The TG analysis revealed that the combustion rate was larger than that of pyrolysis at temperature of 456⯰C below, whereas it decreased at temperature of 456-605⯰C. As a result, the total weight loss was equivalent at temperature of 605⯰C for both processes. The FTIR analysis indicated the plastic combusted vigorously at 300-500⯰C and 800-900⯰C. As a comparison, it decomposed drastically at 300-400⯰C and 500-900° in pyrolysis. The MS analysis showed that the release of brominated products HBr, CH3Br, C2H5Br, C3H5Br, C3H7Br and C3H5BrO increased with an increase of temperature and reached maximum at 400-600⯰C in both thermal processes. The release intensities of larger molecules C6H5Br, C6H5BrO and C6H4Br2 were in the descending order of C6H5Brâ¯>â¯C6H4Br2â¯>â¯C6H5BrO. It was not significant in the evolved products and decomposition pathway for both thermal processes. The entire decomposition of TV plastic shell sample could be divided into three stages, taking account of the evolved products. The backbone in acrylonitrile butadiene styrene resin and tetrabromobisphenol A first broke at 350⯰C below, resulting in the form of 2-bromophenol, styrene, acrylonitrile and polybutadiene. Subsequently, the resulted 2-bromophenol debrominated forming HBr, which further reacted with hydrocarbons resulting in various brominated derivates. In addition, many small molecules, including CO2, CO and CH4 were generated in this stage. Further increasing temperature to 550⯰C above, larger brominated derivates decomposed and smaller molecules predominated.
RÉSUMÉ
Migrant women in China are disproportionately affected by HIV/AIDS. This study described HIV/AIDS-related knowledge and behaviors among married migrant women in Shandong province in comparison to non-migrant local women and identified factors associated with HIV testing history and extramarital sex among married migrant women. A probability-based sample of 1,076 migrant and 1,195 local women were included in the analyses. Compared to local women, married migrant women had lower levels of HIV/AIDS knowledge and were more likely to have had premarital sex, extramarital sex, history of sexually transmitted diseases, and drug use. Less than a quarter of migrant women used condoms consistently in extramarital sex. Only 31.0 % of married migrant women had ever tested for HIV, and the rate of premarital HIV testing was very low. Multivariable analysis showed that married migrant women with a history of extramarital sex were more likely to be from Yunnan province, be living in Yantai city, be in their first marriage, have lower family income, have poor relationship with spouses, use drug, have a history of sexually transmitted diseases, and have lower social support. Our findings provide further evidence that married migrant women are at higher risk for HIV infection and that targeted interventions need to be developed for this population.