RÉSUMÉ
Catalyst design for the efficient CO2 reduction reaction (CO2RR) remains a crucial challenge for the conversion of CO2 to fuels. Natural Ni-Fe carbon monoxide dehydrogenase (NiFe-CODH) achieves reversible conversion of CO2 and CO at nearly thermodynamic equilibrium potential, which provides a template for developing CO2RR catalysts. However, compared with the natural enzyme, most biomimetic synthetic Ni-Fe complexes exhibit negligible CO2RR catalytic activities, which emphasizes the significance of effective bimetallic cooperation for CO2 activation. Enlightened by bimetallic synergy, we herein report a dinickel complex, NiIINiII(bphpp)(AcO)2 (where NiNi(bphpp) is derived from H2bphpp = 2,9-bis(5-tert-butyl-2-hydroxy-3-pyridylphenyl)-1,10-phenanthroline) for electrocatalytic reduction of CO2 to CO, which exhibits a remarkable reactivity approximately 5 times higher than that of the mononuclear Ni catalyst. Electrochemical and computational studies have revealed that the redox-active phenanthroline moiety effectively modulates the electron injection and transfer akin to the [Fe3S4] cluster in NiFe-CODH, and the secondary Ni site facilitates the C-O bond activation and cleavage through electron mediation and Lewis acid characteristics. Our work underscores the significant role of bimetallic cooperation in CO2 reduction catalysis and provides valuable guidance for the rational design of CO2RR catalysts.
RÉSUMÉ
In this study, we highlight the impact of catalyst geometry on the formation of O-O bonds in Cu2 and Fe2 catalysts. A series of Cu2 complexes with diverse linkers are designed as electrocatalysts for water oxidation. Interestingly, the catalytic performance of these Cu2 complexes is enhanced as their molecular skeletons become more rigid, which contrasts with the behavior observed in our previous investigation with Fe2 analogs. Moreover, mechanistic studies reveal that the reactivity of the bridging O atom results in distinct pathways for O-O bond formation in Cu2 and Fe2 catalysts. In Cu2 systems, the coupling takes place between a terminal CuIII -OH and a bridging µ-Oâ radical. Whereas in Fe2 systems, it involves the coupling of two terminal Fe-oxo entities. Furthermore, an in-depth structure-activity analysis uncovers the spatial geometric prerequisites for the coupling of the terminal OH with the bridging µ-Oâ radical, ultimately leading to the O-O bond formation. Overall, this study emphasizes the critical role of precisely adjusting the spatial geometry of catalysts to align with the O-O bonding pathway.
RÉSUMÉ
The selective reduction of carbon dioxide remains a significant challenge due to the complex multielectron/proton transfer process, which results in a high kinetic barrier and the production of diverse products. Inspired by the electrostatic and H-bonding interactions observed in the second sphere of the [NiFe]-CODH enzyme, researchers have extensively explored these interactions to regulate proton transfer, stabilize intermediates, and ultimately improve the performance of catalytic CO2 reduction. In this work, a series of cobalt(II) tetraphenylporphyrins with varying numbers of redox-active nitro groups were synthesized and evaluated as CO2 reduction electrocatalysts. Analyses of the redox properties of these complexes revealed a consistent relationship between the number of nitro groups and the corresponding accepted electron number of the ligand at -1.59 V vs. Fc+/0. Among the catalysts tested, TNPPCo with four nitro groups exhibited the most efficient catalytic activity with a turnover frequency of 4.9 × 104 s-1 and a catalytic onset potential 820 mV more positive than that of the parent TPPCo. Furthermore, the turnover frequencies of the catalysts increased with a higher number of nitro groups. These results demonstrate the promising design strategy of incorporating multielectron redox-active ligands into CO2 reduction catalysts to enhance catalytic performance.
RÉSUMÉ
We report herein the first nonheme CuFe oxygen reduction catalyst ([CuII (bpbp)(µ-OAc)2 FeIII ]2+ , CuFe-OAc), which serves as a functional model of cytochrome c oxidase and can catalyze oxygen reduction to water with a turnover frequency of 2.4×103 â s-1 and selectivity of 96.0 % in the presence of Et3 NH+ . This performance significantly outcompetes its homobimetallic analogues (2.7â s-1 of CuCu-OAc with %H2 O2 selectivity of 98.9 %, and inactive of FeFe-OAc) under the same conditions. Structure-activity relationship studies, in combination with density functional theory calculation, show that the CuFe center efficiently mediates O-O bond cleavage via a CuII (µ-η1 : η2 -O2 )FeIII peroxo intermediate in which the peroxo ligand possesses distinctive coordinating and electronic character. Our work sheds light on the nature of Cu/Fe heterobimetallic cooperation in oxygen reduction catalysis and demonstrates the potential of this synergistic effect in the design of nonheme oxygen reduction catalysts.
RÉSUMÉ
We reported herein the development of heterobimetallic NiFe molecular platform to understand NiFe synergistic effect in water oxidation catalysis. Compared to homonuclear bimetallic compounds (NiNi and FeFe), NiFe complex possesses more remarkable catalytic water oxidation performance. Mechanistic studies suggest that this remarkable difference is attributed to the fact that NiFe synergy can effectively promote O-O bond formation. The generated NiIII (µ-O)FeIV =O is the key intermediate and O-O bond was formed via intramolecular oxyl-oxo coupling between bridged O radical and terminal FeIV =O moiety.
RÉSUMÉ
Molecular catalysis of water oxidation has been intensively investigated, but its mechanism is still not yet fully understood. This study aims at capturing and identifying key short-lived intermediates directly during the water oxidation catalyzed by a cobalt-tetraamido macrocyclic ligand complex using a newly developed an in situ electrochemical mass spectrometry (EC-MS) method. Two key ligand-centered-oxidation intermediates, [(L2-)CoIIIOH] and [(L2-)CoIIIOOH], were directly observed for the first time, and further confirmed by 18O-labeling and collision-induced dissociation studies. These experimental results further confirmed the rationality of the water nucleophilic attack mechanism for the single-site water oxidation catalysis. This work also demonstrated that such an in situ EC-MS method is a promising analytical tool for redox catalytic processes, not only limited to water oxidation.
Sujet(s)
Métaux , Eau , Catalyse , Cobalt , Ligands , Spectrométrie de masse , Oxydoréduction , Eau/composition chimiqueRÉSUMÉ
The proton-coupled electron transfer (PCET) reaction has drawn extensive attention for its widespread occurrence in chemistry, biology, and materials science. The mechanistic studies via model systems such as tyrosine and phenol oxidation have gradually deepened the understanding of PCET reactions, which was widely accepted and applied to bond activation and transformation. However, direct PCET activation of nonpolar bonds such as the C-H bond, O2, and N2 has yet to be explored. Herein, we report that the interaction between electron donor and proton donor could overcome the barrier of direct O2 activation via a concerted electron-proton transfer mechanism. This work provides a new strategy for developing direct PCET activation of nonpolar bonds.
Sujet(s)
Électrons , Protons , Transport d'électrons , Oxydoréduction , OxygèneRÉSUMÉ
Oxidation reactions are fundamental transformations in organic synthesis and chemical industry. With oxygen or air as terminal oxidant, aerobic oxidation catalysis provides the most sustainable and economic oxidation processes. Most aerobic oxidation catalysis employs redox metal as its active center. While nature provides non-redox metal strategy as in pyrroloquinoline quinone (PQQ)-dependent methanol dehydrogenases (MDH), such an effective chemical version is unknown. Inspired by the recently discovered rare earth metal-dependent enzyme Ln-MDH, here we show that an open-shell semi-quinone anionic radical species in complexing with lanthanum could serve as a very efficient aerobic oxidation catalyst under ambient conditions. In this catalyst, the lanthanum(III) ion serves only as a Lewis acid promoter and the redox process occurs exclusively on the semiquinone ligand. The catalysis is initiated by 1e--reduction of lanthanum-activated ortho-quinone to a semiquinone-lanthanum complex La(SQ-.)2, which undergoes a coupled O-H/C-H (PCHT: proton coupled hydride transfer) dehydrogenation for aerobic oxidation of alcohols with up to 330 h-1 TOF.
RÉSUMÉ
Solar-powered water splitting is a dream reaction for constructing an artificial photosynthetic system for producing solar fuels. Natural photosystem II is a prototype template for research on artificial solar energy conversion by oxidizing water into molecular oxygen and supplying four electrons for fuel production. Although a range of synthetic molecular water oxidation catalysts have been developed, the understanding of O-O bond formation in this multielectron and multiproton catalytic process is limited, and thus water oxidation is still a big challenge. Herein, we report a trinuclear copper cluster that displays outstanding reactivity toward catalytic water oxidation inspired by multicopper oxidases (MCOs), which provides efficient catalytic four-electron reduction of O2 to water. This synthetic mimic exhibits a turnover frequency of 20000 s-1 in sodium bicarbonate solution, which is about 150 and 15 times higher than that of the mononuclear Cu catalyst (F-N2O2Cu, 131.6 s-1) and binuclear Cu2 complex (HappCu2, 1375 s-1), respectively. This work shows that the cooperation between multiple metals is an effective strategy to regulate the formation of O-O bond in water oxidation catalysis.
RÉSUMÉ
Herein, we report the importance of structure regulation on the O-O bond formation process in binuclear iron catalysts. Three complexes, [Fe2 (µ-O)(OH2 )2 (TPA)2 ]4+ (1), [Fe2 (µ-O)(OH2 )2 (6-HPA)]4+ (2) and [Fe2 (µ-O)(OH2 )2 (BPMAN)]4+ (3), have been designed as electrocatalysts for water oxidation in 0.1â M NaHCO3 solution (pHâ 8.4). We found that 1 and 2 are molecular catalysts and that O-O bond formation proceeds via oxo-oxo coupling rather than by the water nucleophilic attack (WNA) pathway. In contrast, complex 3 displays negligible catalytic activity. DFT calculations suggested that the anti to syn isomerization of the two high-valent Fe=O moieties in these catalysts takes place via the axial rotation of one Fe=O unit around the Fe-O-Fe center. This is followed by the O-O bond formation via an oxo-oxo coupling pathway at the FeIV FeIV state or via oxo-oxyl coupling pathway at the FeIV FeV state. Importantly, the rigid BPMAN ligand in complex 3 limits the anti to syn isomerization and axial rotation of the Fe=O moiety, which accounts for the negligible catalytic activity.
RÉSUMÉ
Five molecular complexes with different non-noble metal centers were synthesized. The Co-based complex displays the highest photocatalytic performance for CO2 to CO conversion in aqueous media. It achieves high activity (TON = 41 017 and TOF = 3.80 s-1) and selectivity (87%) for the production of CO.
RÉSUMÉ
Water splitting is one of the most promising solutions for storing solar energy in a chemical bond. Water oxidation is still the bottleneck step because of its inherent difficulty and the limited understanding of the O-O bond formation mechanism. Molecular catalysts provide a platform for understanding this process in depth and have received wide attention since the first Ru-based catalyst was reported in 1982. RuV =O is considered a key intermediate to initiate the O-O bond formation through either a water nucleophilic attack (WNA) pathway or a bimolecular coupling (I2M) pathway. Herein, we report a Ru-based catalyst that displays water oxidation reactivity with RuIV =(O) with the help of a redox-active ligand at pHâ 7.0. The results of electrochemical studies and DFT calculations disclose that ligand oxidation could significantly improve the reactivity of RuIV =O toward water oxidation. Under these conditions, sustained water oxidation catalysis occurs at reasonable rates with low overpotential (ca. 183â mV).
RÉSUMÉ
Photothermal therapy at the NIR-II biowindow (1000-1350â nm) is drawing increasing interest because of its large penetration depth and maximum permissible exposure. Now, the supramolecular radical dimer, fabricated by N,N'-dimethylated dipyridinium thiazolo[5,4-d]thiazole radical cation (MPT.+ ) and cucurbit[8]uril (CB[8]), achieves strong absorption at NIR-II biowindow. The supramolecular radical dimer (2MPT.+ -CB[8]) showed highly efficient photothermal conversion and improved stability, thus contributing to the strong inhibition on HegG2 cancer cell under 1064â nm irradiation even penetrating through chicken breast tissue. This work provides a novel approach to construct NIR-II chromophore by tailor-made assembly of organic radicals. It is anticipated that this study provides a new strategy to achieve NIR-II photothermal therapy and holds promises in luminescence materials, optoelectronic materials, and also biosensing.
Sujet(s)
Composés pontés/composition chimique , Radicaux libres/composition chimique , Imidazoles/composition chimique , Rayons infrarouges , Structures macromoléculaires/composition chimique , Thiazoles/composition chimique , Adsorption , Cations/composition chimique , Survie cellulaire/effets des médicaments et des substances chimiques , Survie cellulaire/effets des radiations , Cristallographie aux rayons X , Dimérisation , Cellules HepG2 , Humains , Hyperthermie provoquée/méthodes , Structures macromoléculaires/pharmacologie , Microscopie confocale , Conformation moléculaire , Théorie quantiqueRÉSUMÉ
Here, we report the proton-coupled electron transfer reaction between TEMPO-H and Wurster's blue salt (TMPDAË+). TMPDAË+ could abstract a hydrogen atom from 2,2,6,6-tetramethyl-1-hydroxy-piperidine (TEMPO-H) via concerted electron-proton transfer and displayed a large KIE (7.05 ± 0.07 at 298 K). This work shows that a nitrogen-centered radical cation (R3NË+) such as TMPDAË+ is more than a weak single-electron oxidant, and can also be an effective PCET reagent for oxidative bond activation.
RÉSUMÉ
An unsymmetrical di-copper complex, ([Cu2(TPMAN)(µ-OH)(H2O)]3+, was prepared and used for electrocatalytic water oxidation in neutral conditions. This complex is a stable and efficient homogeneous catalyst during the electrocatalytic oxygen evolution process ( kcat = 0.78 s-1) with 780 mV onset overpotential in 0.1 M phosphate buffer (pH 7.0). The water oxidation mechanism of the unsymmetrical catalyst [Cu2(TPMAN)(µ-OH)]3+ exhibits different behaviors than that of [Cu2(BPMAN)(µ-OH)]3+, such as two redox steps with different pH dependences, a significant kinetic isotope effect, and buffer concentration dependence. All these changes were ascribed to the open site on the Cu center that is formed by removal of the hemilabile pyridyl site, which acts as an intramolecular proton acceptor to assist the O-O bond formation step.
RÉSUMÉ
The performance of water oxidation catalysis by a Cu-based polypyridyl complex, [CuII(TPA)(OH2)]2+ (1H; TPA = tris-(pyridylmethyl)amine), has been investigated in neutral aqueous solution by electrochemical methods. Compared with our previously reported binuclear catalyst, [(BPMAN)(CuII)2(µ-OH)]3+ (2; BPMAN = 2,7-[bis(2-pyridylmethyl)aminomethyl]-1,8-naphthyridine), mononuclear catalyst 1 has a higher overpotential and lower catalytic activity toward water oxidation under the same conditions. Experimental results revealed that the O-O bond formation occurred via a water nucleophilic attack mechanism in which formal CuIV(O) is proposed as a key intermediate for the mononuclear catalyst 1H. In contrast, for the binuclear catalyst, O-O bond formation was facilitated by bimetallic cooperation between the two CuIII centers.
RÉSUMÉ
Artificial photosynthesis is a chemical process that aims to capture energy from sunlight to produce solar fuels. Light absorption by a robust and efficient photosensitizer is one of the key steps in solar energy conversion. However, common photosensitizers, including [Ru(bpy)3]2+ (RuP), remain far from the ideal. In this work, we exploited the performance of conjugated polymers (CPs) as photosensitizers in photodriven hydrogen evolution in aqueous solution (pH 6). Interestingly, CPs, such as poly(fluorene- co-phenylene) derivative (429 mmolH2·gCP-1·h-1), exhibit steady and high reactivity toward hydrogen evolution; this performance can rival that of a phosphonated RuP under the same conditions, indicating that CPs are promising metal-free photosensitizers for future applications in photocatalysis.
RÉSUMÉ
Water oxidation is the key step in both natural and artificial photosynthesis to capture solar energy for fuel production. The design of highly efficient and stable molecular catalysts for water oxidation based on nonprecious metals is still a great challenge. In this article, the electrocatalytic oxidation of water by Na[(L4-)CoIII], where L is a substituted tetraamido macrocyclic ligand, was investigated in aqueous solution (pH 7.0). We found that Na[(L4-)CoIII] is a stable and efficient homogeneous catalyst for electrocatalytic water oxidation with 380 mV onset overpotential in 0.1 M phosphate buffer (pH 7.0). Both ligand- and metal-centered redox features are involved in the catalytic cycle. In this cycle, Na[(L4-)CoIII] was first oxidized to [(L2-)CoIIIOH] via a ligand-centered proton-coupled electron transfer process in the presence of water. After further losing an electron and a proton, the resting state, [(L2-)CoIIIOH], was converted to [(L2-)CoIVâO]. Density functional theory (DFT) calculations at the B3LYP-D3(BJ)/6-311++G(2df,2p)//B3LYP/6-31+G(d,p) level of theory confirmed the proposed catalytic cycle. According to both experimental and DFT results, phosphate-assisted water nucleophilic attack to [(L2-)CoIVâO] played a key role in O-O bond formation.
RÉSUMÉ
The reactivity, and even reaction pathway, of excited states can be tuned by proton-coupled electron transfer (PCET). The triplet state of benzophenone functionalized with a Brønsted acid (3 *BP-COOH) showed a more powerful oxidation capability over the simple triplet state of benzophenone (3 *BP). 3 *BP-COOH could remove an electron from benzene at the rate of 8.0×105 m-1 s-1 , in contrast to the reactivity of 3 *BP which was inactive towards benzene oxidation. The origin of this great enhancement on the ability of the excited states to remove electrons from substrates is attributed to the intramolecular Brønsted acid, which enables the reductive quenching of 3 *BP by concerted electron-proton transfer.
RÉSUMÉ
Photoinitiated proton-coupled electron transfer (PCET) kinetics has been investigated in a series of four modified tyrosines linked to a ruthenium photosensitizer in acetonitrile, with each tyrosine bearing an internal hydrogen bond to a covalently linked pyridine or benzimidazole base. After correcting for differences in driving force, it is found that the intrinsic PCET rate constant still varies by 2 orders of magnitude. The differences in rates, as well as the magnitude of the kinetic isotope effect (KIE = kH/kD), both generally correlate with DFT calculated proton donor-acceptor distances. An Arrhenius analysis of temperature dependent data shows that the difference in reactivity arises primarily from differences in activation energies. We use this kinetic data to evaluate a commonly employed theoretical model for proton tunneling which includes a harmonic distribution of proton donor-acceptor distances due to vibrational motions of the molecule. Applying this model to the experimental data yields the conclusion that donor-acceptor compression is more facile in the compounds with shorter PT distance; however, this is contrary to independent calculations for the same compounds. This discrepancy is likely because the assumption in the model of Morse-shaped proton potential energy surfaces is inappropriate for (strongly) hydrogen-bonded systems. These results question the general applicability of this model. The results also suggest that a correlation of rate vs proton tunneling distance for the series of compounds is complicated by a concomitant variation of other relevant parameters.