RÉSUMÉ
Utilizing softly confined self-assembly at the water surface represents a promising approach for the fabrication of two-dimensional molecular monolayers (2D MMs), which have predominantly been concentrated on amphiphilic organic compounds before. Herein, we introduce a straightforward method termed "water surface-assisted molecular deposition (WSAMD)" to organize nonamphiphilic molecules into dense monolayers with high reproducibility. To underscore the versatility and merit of this methodology in the field of supramolecular electronics, we have successfully fabricated a range of defect-free, uniform semiconducting polymer monolayers, featuring a thickness reflective of molecular architectures. The charge carrier mobility could reach 0.05 cm2 V-1 s-1 for holes and 3.5 × 10-4 cm2 V-1 s-1 for electrons, respectively, in p-type and n-type polymeric monolayers when tested as the active layer in field-effect transistors. Furthermore, in situ polymerization reactions can be exploited to generate conductive monolayers of macromolecules such as polybenzylaniline (PBnANI) and polypyrrole (PPy), where PBnANI monolayers exhibit channel length-dependent conductivity, up to 0.37 S cm-1. The advent of the WSAMD method heralds a significant leap forward in the advancement of molecular 2D materials, catalyzing new avenues of exploration within material chemistry.
RÉSUMÉ
Lensless imagers based on diffusers or encoding masks enable high-dimensional imaging from a single-shot measurement and have been applied in various applications. However, to further extract image information such as edge detection, conventional post-processing filtering operations are needed after the reconstruction of the original object images in the diffuser imaging systems. Here, we present the concept of a temporal compressive edge detection method based on a lensless diffuser camera, which can directly recover a time sequence of edge images of a moving object from a single-shot measurement, without further post-processing steps. Our approach provides higher image quality during edge detection, compared with the "conventional post-processing method." We demonstrate the effectiveness of this approach by both numerical simulation and experiments. The proof-of-concept approach can be further developed with other image post-processing operations or versatile computer vision assignments toward task-oriented intelligent lensless imaging systems.
RÉSUMÉ
Single lanthanide (Ln) ion doped upconversion nanoparticles (UCNPs) exhibit great potential for biomolecule sensing and counting. Plasmonic structures can improve the emission efficiency of single UCNPs by modulating the energy transferring process. Yet, achieving robust and large-area single UCNP emission modulation remains a challenge, which obstructs investigation and application of single UCNPs. Here, we present a strategy using metal nanohole arrays (NHAs) to achieve energy-transfer modulation on single UCNPs simultaneously within large-area plasmonic structures. By coupling surface plasmon polaritons (SPPs) with higher-intermediate state (1D2 â 3F3, 1D2 â 3H4) transitions, we achieved a remarkable up to 10-fold enhancement in 800 nm emission, surpassing the conventional approach of coupling SPPs with an intermediate ground state (3H4 â 3H6). We numerically simulate the electrical field distribution and reveal that luminescent enhancement is robust and insensitive to the exact location of particles. It is anticipated that the strategy provides a platform for widely exploring applications in single-particle quantitative biosensing.
RÉSUMÉ
Photon blockade (PB), an effective method of generating antibunching effect, is a critical way to construct a single photon source. The PB effect can be divided into conventional PB effect (CPB) and unconventional PB effect (UPB). Most studies focus on designing systems to successfully enhance CPB or UPB effect individually. However, CPB extremely depends on the nonlinearity strength of the Kerr materials to achieve strong antibunching effect while UPB relies on quantum interference beset with the high probability of the vacuum state. Here, we propose a method to utilize the relevance and complementarity of CPB and UPB to realize these two types simultaneously. We employ a hybrid Kerr nonlinearity two-cavity system. Because of the mutual assistance of two cavities, CPB and UPB can coexist in the system under certain states. In this way, for the same Kerr material, we reduce the value of the second-order correlation function due to CPB by three orders of magnitude without losing the mean photon number due to the presence of UPB, so the advantages of both PB effects are fully reflected in our system, which is a huge performance boost for single photons.
RÉSUMÉ
Entanglement of optical mode and mechanical mode plays a significant role for quantum information processing and memory. This type of optomechanical entanglement is always be suppressed by the mechanically dark-mode (DM) effect. However, the reason of the DM generation and how to control the bright-mode (BM) effect flexibly are still not resolved. In this letter, we demonstrate that the DM effect occurs at the exceptional point (EP) and it can be broken by changing the relative phase angle (RPA) between the nano scatters. We find that the optical mode and mechanical mode are separable at EPs but entangled when the RPA is tuned away from the EPs. Remarkably, the DM effect will be broken if the RPA away from EPs, resulting in the ground-state cooling of the mechanical mode. In addition, we prove that the chirality of the system can also influence the optomechanical entanglement. Our scheme can control the entanglement flexible merely depend on the relative phase angle, which is continuously adjustable and experimentally more feasible.
RÉSUMÉ
Manufacturing sharp features is one of the most desired requirements for lithography. Here, we demonstrate a dual-path self-aligned polarization interference lithography (Dp-SAP IL) for fabricating periodic nanostructures, featuring high-steepness and high-uniformization. Meanwhile, it can manufacture quasicrystals with adjustable rotation symmetry. We reveal the change of the non-orthogonality degree under different polarization states and incident angles. We find that incident light's transverse electric (TE) wave results in high interference contrast at arbitrary incident angles, with a minimum contrast of 0.9328, that is, realizing the self-alignment of the polarization state of incident light and reflected light. We experimentally demonstrate this approach by fabricating a series of diffraction gratings with periods ranging from 238.3â nm to 851.6â nm. The steepness of each grating is greater than 85 degrees. Different from the traditional interference lithography system, Dp-SAP IL realizes a structure color using two mutually perpendicular and non-interference paths. One path is for the photolithography of patterns onto the sample, and the other path is for generating nanostructures on the patterns. Our technique showcases the feasibility of obtaining high contrast interference fringes by simply tuning the polarization, with the potential for cost-effective manufacturing of nanostructures such as quasicrystals and structure color.
RÉSUMÉ
In this paper, we present a dual-mode adaptive singular value decomposition ghost imaging (A-SVD GI), which can be easily switched between the modes of imaging and edge detection. It can adaptively localize the foreground pixels via a threshold selection method. Then only the foreground region is illuminated by the singular value decomposition (SVD) - based patterns, consequently retrieving high-quality images with fewer sampling ratios. By changing the selecting range of foreground pixels, the A-SVD GI can be switched to the mode of edge detection to directly reveal the edge of objects, without needing the original image. We investigate the performance of these two modes through both numerical simulations and experiments. We also develop a single-round scheme to halve measurement numbers in experiments, instead of separately illuminating positive and negative patterns in traditional methods. The binarized SVD patterns, generated by the spatial dithering method, are modulated by a digital micromirror device (DMD) to speed up the data acquisition. This dual-mode A-SVD GI can be applied in various applications, such as remote sensing or target recognition, and could be further extended for multi-modality functional imaging/detection.
RÉSUMÉ
Understanding the principle of regulated cell death (RCD) such as ferroptosis and apoptosis provides opportunities to overcome sorafenib resistance of HCC. Complexin II (CPLX2) is involved in calcium-dependent fusion of vesicles and plasma membrane, and recent studies showed CPLX2 is involved in cancer progression. However, the expression and function of CPLX2 are unclear in hepatocellular carcinoma (HCC). qPCR and western blotting assays were used to detect the levels of CPLX2. MTT and colony formation assays were used to detect cell viability. The contents of iron, ROS, MDA, and GSH were used to evaluate the function of CPLX2 on ferroptosis, while the flow cytometry and TUNEL assays were used to evaluate the role of CPLX2 on apoptosis. Our analysis showed CPLX2 is significantly upregulated in HCC, which predicts poor overall survival (OS), progression-free survival (PFS), relapse-free survival (RFS), and disease-specific survival (DSS) for patients with HCC. Further function enrichment analysis of genes related to CPLX2 showed CPLX2 is involved in the NRF2 pathway. Downregulation of CPLX2 can inhibit NRF2 expression and the transcription of its downstream genes, which confirms that CPLX2 is involved in NRF2 pathway. Cell viability assay showed that ferroptosis and apoptosis inhibitors can reverse the inhibition effect of CPLX2-knockdown on cell survival, respectively. And downregulation of CPLX2 significantly promotes the contents of iron, ROS, and MDA, while inhibiting the GSH level of HCC cell lysate, suggesting CPLX2 involved in ferroptosis. Moreover, downregulation of CPLX2 promotes the apoptosis of HCC cells by flow cytometry and TUNEL assay. And upregulation of NRF2 can partly reverse the inhibitory effect of CPLX2-downregulation on ferroptosis and apoptosis. Finally, we found downregulation of CPLX2 aggravates cell death induced by sorafenib. CPXL2 regulates ferroptosis and apoptosis through NRF2 pathway, and CPLX2 knockdown promotes cell death induced by sorafenib. CPLX2 might be an effective target for therapy patients with HCC.
Sujet(s)
Carcinome hépatocellulaire , Ferroptose , Tumeurs du foie , Facteur-2 apparenté à NF-E2 , Humains , Apoptose , Carcinome hépatocellulaire/anatomopathologie , Fer/pharmacologie , Tumeurs du foie/anatomopathologie , Facteur-2 apparenté à NF-E2/génétique , Facteur-2 apparenté à NF-E2/métabolisme , Espèces réactives de l'oxygène/métabolisme , Sorafénib/pharmacologie , Protéines adaptatrices du transport vésiculaire/génétique , Protéines adaptatrices du transport vésiculaire/métabolismeRÉSUMÉ
Single-beam super-resolution microscopy, also known as superlinear microscopy, exploits the nonlinear response of fluorescent probes in confocal microscopy. The technique requires no complex purpose-built system, light field modulation, or beam shaping. Here, we present a strategy to enhance this technique's spatial resolution by modulating excitation intensity during image acquisition. This modulation induces dynamic optical nonlinearity in upconversion nanoparticles (UCNPs), resulting in variations of nonlinear fluorescence response in the obtained images. The higher orders of fluorescence response can be extracted with a proposed weighted finite difference imaging algorithm from raw fluorescence images to generate an image with higher resolution than superlinear microscopy images. We apply this approach to resolve single nanoparticles in a large area, improving the resolution to 132 nm. This work suggests a new scope for the development of dynamic nonlinear fluorescent probes in super-resolution nanoscopy.
Sujet(s)
Colorants fluorescents , Nanoparticules , Algorithmes , Microscopie confocale/méthodesRÉSUMÉ
The current intelligent automation society faces increasingly severe challenges in achieving efficient storage and utilization of energy. In the field of energy applications, various energy technologies need to be more intelligent and efficient to produce, store, transform and save energy. In addition, many smart electronic devices facing the future also require newer, lighter, thinner and even transparent multi-functional power supplies. The unique properties of electrochromic energy storage devices (ECESDs) have attracted widespread attention. In the field of energy applications, they have high potential value and competitiveness. This review focuses on the electrochromic basic principles, and the latest technological examples of ECESDs, which are related to materials and device structures. Simultaneously, this review makes a detailed comparison and summary of example performances. Moreover, the review compares the current mainstream energy storage devices: lithium batteries and supercapacitors, and the main challenges of ECESDs are discussed. Finally, the future development directions in the field of electrochromic energy storage are predicted.
RÉSUMÉ
Over the past few decades, the landscape of inorganic medicinal chemistry has been dominated by investigations on platinum or ruthenium, while the research based on other metal centers such as rhodium has been relatively insufficient. In this work, a series of cyclometalated rhodium(iii) complexes with imidazo[4,5-f][1,10]phenanthroline containing different aromatic rings were synthesized and characterized. Notably, all the complexes displayed stronger anticancer activity against various cancer cells compared with cisplatin. A mechanism study revealed that the rhodium complexes accumulated in the mitochondria, elevated the levels of mitochondrial reactive oxygen species (ROS) and released cytochrome c, indicating severe mitochondrial damage during the anticancer activity. Further studies illustrated that the rhodium complexes caused cell cycle arrest at the G2/M phase, upregulated the expression of p53 and reduced the ratio of B-cell lymphoma-2 (Bcl-2)/Bcl-2-associated x (Bax), which ultimately resulted in cellular apoptosis. Overall, through mitochondrial pathways, these Rh(iii) complexes could induce cellular apoptosis to a larger extent than cisplatin and should be paid close attention as promising chemotherapeutic drugs in anticancer research.
Sujet(s)
Rhodium , Ruthénium , Apoptose , Mitochondries , Espèces réactives de l'oxygèneRÉSUMÉ
Nonradiative energy transfer (NRET) under light-matter strong coupling interaction provides an efficient method to achieve the ultralong-distance and ultrafast energy transfer, which is of significance in realizing remote control chemistry and the real-time dynamic research of biological macromolecules interaction and so on. Here we show that not only can the cavity mode first resonate with the donor to form a cascade hybrid light-matter states to drive energy transfer, when the cavity mode first resonates with the acceptor, it also can enhance the nonradiative energy transfer between the donor and the acceptor. Importantly, although these two strong coupling systems can enhance energy transfer, the polariton-mediated energy transfer mechanism behind these processes is different. By employing the quantum Tavis-Cummings theory, we calculate the time evolution of the mean photon number of each polariton state to analyze the energy transfer effect under different strongly coupled states.
RÉSUMÉ
BACKGROUND: Many studies have indicated that autophagy plays an important role in multiple cancers, including hepatocellular carcinoma (HCC). This study aimed to establish a prognostic signature for HCC based on autophagy-related genes (ARGs) to predict the prognosis of patients. METHODS: The list of ARGs was derived from screening National Center for Biotechnology Information (NCBI)-Gene and Molecular Signatures Database (MSigDB) datasets. Differential analysis was conducted via the R limma package in HCC patients based on The Cancer Genome Atlas (TCGA) database. Univariate and multivariate Cox regression analysis were conducted to identify key prognostic ARGs via the survival package. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis were performed by clusterProfiler package. The Estimation of Stromal and Immune cells in MAlignant Tumor tissues using Expression data (ESTIMATE) algorithm was used to conduct immune analysis. Finally, the correlation between the prognostic model and clinical characteristics was also assessed, including age, tumor-node-metastasis (TNM) stages, and tumor grades. RESULTS: Firstly, 106 differential ARGs were identified and 10 candidates were further confirmed via Cox regression analysis, including BAMBI, HIF1A, SERPINE1, EZH2, SLC9A3R1, IGFBP3, HSPB8, DAB2, CXCL1 and PRNP. The receiver operating characteristic (ROC) curve analysis revealed that the ARGs risk model had a well diagnostic positive rate with 1-year area under the curve (AUC) =0.688 and 3-year AUC =0.674. Correlation analysis indicated that only advanced tumor stages were positively associated with high ARGs scores with P=0.0227. There were also significant differences in tumor purity (P=6.71e-05), infiltrating cell analysis (P=7.77e-05), immune analysis (P=7.9e-05), and stromal cells analysis (P=0.0015) in high- and low-risk ARGs samples. The genes HIF1A, IGFBP3, and DAB2 were found to have high frequent missense mutations in samples with high-risk ARGs scores. Lastly, we also established a nomogram to predict overall survival (OS) of HCC by integrating ARGs scores and other clinical parameters. CONCLUSIONS: Our study established an autophagy-related signature for predicting the prognosis of HCC patients, providing a thorough understanding of the underlying mechanisms of autophagy in HCC.
RÉSUMÉ
Device-scale, uniform, and controllable deposition of nanoparticles on various substrates is fundamentally important not only for the fabrication of thin-film devices but also for the large sample statistics of single-particle performances. However, it is challenging to obtain such predefined depositions using a simple and efficient method. Here, we present a novel strategy for obtaining the uniform and particle density/spacing-tunable deposition of nanorods on a linker-free substrate. The deposition is driven by the tailored particle-substrate depletion attraction owing to the size-matched design of the substrate roughness and the nanorod diameter. Both gold nanorods and upconversion nanorods were applied to demonstrate the generality of the method. The high particle density of more than 21 per µm2 and correspondingly the small particle spacing of fewer than 0.3 µm were achieved on a scalable substrate template. On this basis, orientational ordering and pattern-selective deposition of nanorods were realized by controlling the liquid flow rate and employing the substrate with patterned roughness areas, respectively. With the roughness-directed density-tunable depositions of nanorods integrated onto a single platform, multiplexed gold nanorod assembly and programmable surface-enhanced Raman mapping were achieved, with a promising prospect in information encoding by using the Raman signals as the translation units. The thermal stability and related transition temperature of about 160 °C of gold nanorods were also revealed as an application of single-particle statistics. This practical method could be extended to wide ranges of potential applications in plasmonic coupling devices, cryptography, or single-particle performance statistics with the feature of the high-throughput, low-cost, and scalable fabrication.
RÉSUMÉ
The beneficial function of gastrodin towards many inflammatory diseases has been identified. This study designed to see the influence of gastrodin in a cell model of chronic obstructive pulmonary disease (COPD). MRC-5 cells were treated by LPS, before which gastrodin was administrated. The effects of gastrodin were evaluated by conducting CCK-8, FITC-PI double staining, Western blot, qRT-PCR and ELISA. Besides this, the downstream effector and signalling were studied to decode how gastrodin exerted its function. And dual-luciferase assay was used to detect the targeting link between miR-103 and lipoprotein receptor-related protein 1 (LRP1). LPS induced apoptosis and the release of MCP-1, IL-6 and TNF-α in MRC-5 cells. Pre-treating MRC-5 cells with gastrodin attenuated LPS-induced cell damage. Meanwhile, p38/JNK and NF-κB pathways induced by LPS were repressed by gastrodin. miR-103 expression was elevated by gastrodin. Further, the protective functions of gastrodin were attenuated by miR-103 silencing. And LRP1 was a target of miR-103 and negatively regulated by miR-103. The in vitro data illustrated the protective function of gastrodin in LPS-injured MRC-5 cells. Gastrodin exerted its function possibly by up-regulating miR-103 and modulating p38/JNK and NF-κB pathways.
RÉSUMÉ
Plasmonic coupling is a fascinating phenomenon occurring between neighboring metal nanostructures. We report a straightforward approach to study such process macroscopically by fabricating 2D networks of gold nanoparticles, interconnected with responsive hygroscopic organic linkers. By controlling the humidity we tune the interparticle distance to reversibly trigger plasmonic coupling collectively over several millimeters.
RÉSUMÉ
Dengue fever (DF) and dengue hemorrhagic fever (DHF) are recurrent diseases that are widespread in the tropics. Here, we identified candidate genes associated with these diseases by performing integrated analyses of DF (GSE51808) and DHF (GSE18090) microarray datasets in the Gene Expression Omnibus (GEO). In all, we identified 7635 differentially expressed genes (DEGs) in DF and 8147 DEGs in DHF as compared to healthy controls (P < 0.05). In addition, we discovered 215 differentially expressed long non-coding RNAs (DElncRNAs) in DF and 225 DElncRNAs in DHF. There were 1256 common DEGs and eight common DElncRNAs in DHF vs DF, DHF vs normal control, and DF vs normal control groups. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis revealed that signal transduction (false discovery rate = 8.33E-10), 'toxoplasmosis', and 'protein processing in endoplasmic reticulum' were significantly enriched pathways for common DEGs. We conclude that the MAGED1,STAT1, and IL12A genes may play crucial roles in DF and DHF, and suggest that our findings may facilitate the identification of biomarkers and the development of new drug design strategies for DF and DHF treatment.
Sujet(s)
Dengue/génétique , ARN long non codant/génétique , ARN messager/génétique , Dengue sévère/génétique , Marqueurs biologiques/analyse , Analyse de profil d'expression de gènes , HumainsRÉSUMÉ
The spatially precise integration of arrays of micropatterned two-dimensional (2D) crystals onto three-dimensionally structured Si/SiO2 substrates represents an attractive, low-cost system-on-chip strategy toward the realization of extended functions in silicon microelectronics. However, the reliable integration of such atomically thin arrays on planar patterned surfaces has proven challenging due to their poor adhesion to underlying substrates, as ruled by weak van der Waals interactions. Here, we report on an integration method utilizing the flexibility of the atomically thin crystals and their physical subsidence in liquids, which enables the reliable fabrication of the micropatterned 2D materials/Si arrays. Our photodiode devices display peak sensitivity as high as 0.35 A/W and external quantum efficiency (EQE) of â¼90%. The nano-subsidence technique represents a viable path to on-chip integration of 2D crystals onto silicon for advanced microelectronics.
RÉSUMÉ
Self-standing nanostructures are of fundamental interest in materials science and nanoscience and are widely used in (opto-)electronic and photonic devices as well as in micro-electromechanical systems. To date, large-area and self-standing nanoelectrode arrays assembled on flexible substrates have not been reported. Here the fabrication of a hollow nanomesh scaffold on glass and plastic substrates with a large surface area over 1 mm2 and ultralow leakage current density (≈1-10 pA mm-2 @ 2 V) across the empty scaffold is demonstrated. Thanks to the continuous sub-micrometer space formed in between the nanomesh and the bottom electrode, highly crystalline and dendritic domains of 6,13-bis(triisopropylsilylethinyl)pentacene growing within the hollow cavity can be observed. The high degree of order at the supramolecular level leads to efficient charge and exciton transport; the photovoltaic detector supported on flexible polyethylene terephthalate substrates exhibits an ultrafast photoresponse time as short as 8 ns and a signal-to-noise ratio approaching 105 . Such a hollow scaffold holds great potential as a novel device architecture toward flexible (opto-)electronic applications based on self-assembled micro/nanocrystals.
RÉSUMÉ
The use of biomimetic approaches toward the production of nonsolid yet functional architectures holds potential for the emergence of novel device concepts. Gels, in particular those obtained via self-assembly of π-conjugated molecules, are dynamic materials possessing unique (opto)electronic properties. Their adaptive nature imparts unprecedented responsivity to various stimuli. Hitherto, a viable device platform to electrically probe in situ a sol-gel transition is still lacking. Here we describe the fabrication of a sub-micrometer electrodic cavity, which enables low-voltage electrical operation of π-gels. Thanks to the in situ supramolecular self-assembly of the π-gelator occurring within the cavity, we conceived a novel gel-based memristor whose sol-gel transition is reversible and can be controlled via heating and dc bias. This work opens perspectives toward the fabrication of a novel generation of nonsolid multiresponsive devices.