Morphology of Four Strains of Phellinoid Agaricomycetes and Microstructural and Physiological Properties of Their Exudates.

To study and compare the morphology of the phellinoid Agaricomycetes strains and find other strategies to improve Phellinus spp. growth and metabolism. In this study, the morphological characteristics of four Phellinus igniarius strains (phellinoid Agaricomycetes) were observed under a light microscope. The exudates from these fungi were observed using light microscopy, scanning electron microscopy (SEM), and energy-dispersive spectrometry (EDS). The exudates were initially transparent with a water-like appearance, and became darker with time at neutral pH. Microscopy of air-dried exudates revealed regular shapes and crystals. Cl- (chloride) and K+ were the two key elements analyzed using EDS. Polyphenol oxidase (POD), catalase (CAT), and laccase activities were detected in mycelia from each of the four Phellinus strains. The K+ content of the three strains was higher than that of the wild strain. Cl- content correlated negatively with that of K+. Laccase activities associated with each mycelia and its corresponding media differed under cold and contaminated conditions.

Preparation of umami peptides from chicken breast by batch coupled enzymatic hydrolysis and membrane separation mode and the taste mechanism of identified umami peptides.

Batch coupled enzymatic hydrolysis and membrane separation mode (BCEH-MSM) is efficient in preparing active peptides due to enzyme being more purposeful in hydrolysing macromolecular. Therefore, BCEH-MSM probably could be an alternative option to the traditional enzymatic hydrolysis and offline membrane separation mode (TEH-OMSM). This work aimed to explore the potential of BCEH-MSM in enhancing the enzymatic hydrolysis (EH) efficiency and the umami of the enzymatic hydrolysate. The EH efficiency was valuated based on product yields. Amino acid analyzer and HPLC were used to analyze tasting compounds. Electronic-tongue was used to determine umami intensity. The results showed that BCEH-MSM exhibited superior EH efficiency and higher umami intensity compared to TEH-OMSM. LC-MS/MS was used to identify peptides with higher umami intensity in the enzymatic hydrolysate. LGEETF, VNFDGEI, and QLSELLRAGSSPNL had umami profile verified by electronic-tongue. Molecular docking further showed that crucial amino acid residues involved in the binding to T1R1/T1R3 was His145.

Catalytic infrared radiation dry-peeling Technology for non-Frozen and Frozen Grapes: Effects on temperature, peeling performance, and quality attributes.

This study introduces catalytic infrared radiation (CIR) heating technology as an eco-friendly alternative to conventional grape lye peeling (LP). The effects of heating time and distance on non-frozen and frozen grapes were assessed for temperature, peeling performance, and quality attributes. The findings indicate that CIR heating achieves complete dry-peeling of grapes. Extended heating times and reduced distances improve peeling performance, with more favorable results observed in frozen grapes compared to non-frozen ones. Grapes peeled using CIR demonstrated enhanced hardness, color, sugar-acid ratio, bioactive compounds, and antioxidant capacity, compared to those peeled using LP. Importantly, the frozen samples preserved their quality after CIR dry-peeling treatment. Based on peeling performance and quality attributes, the optimum heating times are established at 160 s for non-frozen grapes and 50 s for frozen grapes, at a heating distance of 5 cm. Therefore, CIR dry-peeling is recommended as an eco-friendly and quality-enhancing sustainable grape processing technology.

Properties, extraction and purification technologies of Stevia rebaudiana steviol glycosides: A review.

For health and safety reasons, the search for green, healthy, and low-calorie sweeteners with good taste has become the demand of many consumers. Furthermore, the need for sugar substitutes of natural origin has increased dramatically. In this review, we briefly discussed the safety and health benefits of stevia sweeteners and enumerated some examples of physiological functions of steviol glycosides (SGs), such as anti-inflammatory, anti-obesity, antihypertensive, anti-diabetes, and anticaries, citing various evidence related to their application in the food industry. The latest advances in emerging technologies for extracting and purifying SGs and the process variables and operational strategies were discussed. The impact of the extraction methods and their comparison against the conventional techniques have also been demonstrated. These technologies use minimal energy solvents and simplify subsequent purification stages, making viable alternatives suitable for a possible industrial application. Furthermore, we also elucidated the potential for advancing and applying the natural sweeteners SGs.

Multimode ultrasonic-assisted decontamination of fruits and vegetables: A review.

Fruits and vegetables (F&V) are a significant part of our diet consumption. Microbial and pesticide residues are the predominant safety hazards of F&V consumption. Ordinary water washing has a very limited effect on removing microorganisms and pesticide residues and requires high water usage. Ultrasound, as an environmentally friendly technology, shows excellent potential for reducing microbial contamination and pesticide residue. This paper summarizes the research on ultrasound application in F&V washing, including the removal of microbial and pesticide residues and the comprehensive effect on their physicochemical characteristics. Furthermore, multimode ultrasonic-assisted techniques like multi-frequency and sequential ultrasound, combined with novel and conventional methods, can enhance the ultrasound-based effect and be more effective and sustainable in preventing F&V from microbial contamination. Overall, this work explicitly establishes the background on the potential for ultrasound cleaning and disinfection in the food industry as a green, effective, and ultimate method of preventing foodborne illnesses.

Effects of combined drying techniques and cellulase hydrolysis on the nutritional value and sensory properties of shiitake mushrooms (Lentinus edodes).

Dried shiitake mushrooms offer rich nutritional value and unique sensory properties, prompting further investigation. The effects of different drying techniques (hot air drying (HAD), infrared hot air drying (IRHAD), pulsed vacuum drying (PVD), vacuum freeze drying (VFD), and natural drying (ND)) combined with enzymatic hydrolysis on the release of flavor compounds and nutrients from shiitake mushrooms were explored. The combination of HAD with cellulase hydrolysis yielded notably high levels of umami amino acids (5.4723 ± 0.1501 mg/g) and 5'-nucleotides (4.0536 ± 0.0062 mg/g), and superior volatile flavors. Combined with cellulase hydrolysis, IRHAD achieved the highest level of total sugars (6.57 ± 0.34 mg/mL), VFD resulted in the greatest soluble protein content (153.21 ± 0.23 µg/mL), PVD yielded the highest total phenolics content (93.20 ± 0.41 µg GAE/mL), and ND produced the maximum reducing sugar content (5.79 ± 0.13 mg/mL). This study addresses crucial gap in the post-drying processing of shiitake mushrooms, offering valuable insights for further product development of shiitake mushrooms.

Ultrasonic-enhanced photocatalysis through piezoelectric and cavitation effects for lignin depolymerization.

Although a promising method for lignin depolymerization, photocatalysis faces the challenge of low efficiency. In this study, MoS2/ZnO heterojunction catalysts, endowed with piezocatalysis and photocatalytic capabilities, were crafted through Zn ion intercalation for the depolymerization of phenoxyphenylethanol (PP-ol) and alkali lignin. Then, the synergistic interplay between ultrasonic-induced piezoelectric fields and heterojunctions was analyzed. The amalgamation of the piezoelectric field and heterojunction in MoS2/ZnO catalysts resulted in a diminished photogenerated hole/electron recombination efficiency, thereby fostering the generation of ·OH during the reaction. This pivotal role of ·OH emerged as a crucial reactive substance, converting 95.8 % of PP-ol through ß-O-4 bond breaking within a 3-h treatment. By incorporating ultrasonic, the contact probability of PP-ol with the catalyst was significantly improved, resulting in efficient conversion even with a reduced amount of acetonitrile in the solvent system (20 %). Furthermore, ultrasonic-light methods show high efficiency for depolymerizing Alkali lignin (AL), with 33.2 % of lignin undergoing depolymerization in a 4-h treatment. This treatment simultaneously reduces the molecular weight of AL and cleaves numerous chemical bonds within it. Overall, this work presents a green approach to lignin depolymerization, providing insights into the synergistic action of ultrasonic and photocatalysis.

Improvement of the drying quality of blueberries by catalytic infrared blanching combined with ultrasound pretreatment.

This paper investigated the effect of catalytic infrared blanching combined with ultrasound pretreatment on quality and waxy structure of blueberries. Different blueberry samples were prepared, including control (untreated) and samples treated by hot water blanching (HB), catalytic infrared blanching (CIB), ultrasound-catalytic infrared blanching (US-CIB), and catalytic infrared blanching-ultrasound (CIB-US). The effect of different pretreatments on the microstructure of blueberry epidermis was studied. The drying time of blueberries after HB, US-CIB, and CIB-US was decreased by 11.61%, 17.54%, and 17.27%, respectively, compared with control (33.75 h), and drying efficiency was significantly improved. Blueberries after pretreatments had higher content of polyphenol and anthocyanin, with an increase of 29.51-44.21% in phenol and 8.81-20.80% in anthocyanin, the antioxidant capacity of blueberries was also better than control and CIB enhanced the antioxidant capacity of blueberries. CIB-US can be used as an efficient pretreatment method for blueberry drying.

Ultrasound synergistic slightly acidic electrolyzed water treatment of grapes: Impacts on microbial loads, wettability, and postharvest storage quality.

Microbial contamination is the principal factor in the deterioration of postharvest storage quality in grapes. To mitigate this issue, we explored a synergistic treatment which combines ultrasound (US) and slightly acidic electrolyzed water (SAEW), and rigorously compared with conventional water cleaning (CW), exclusive US treatment, and standalone SAEW treatment. The US + SAEW treatment proved to be markedly superior in reducing total bacterial, mold & yeast counts on grapes. Specifically, it achieved reductions of 2.23 log CFU/g and 2.76 log CFU/g, respectively, exceeding the efficiencies of SAEW (0.78, 0.75), US (0.58, 0.65), and CW (0.24, 0.46). The efficacy of this synergistic treatment is attributed to the ultrasound removal of the wax layer on grape skins, which transitions the skin from hydrophobic to hydrophilic. This alteration increases the contact area between the grape surface and SAEW, thereby enhancing the antimicrobial efficacy of SAEW. From a physicochemical quality standpoint, the US + SAEW treatment exhibited multiple advantages. It not only minimized weight loss, color deviations, polyphenol oxidase activity and malondialdehyde synthesis in comparison to CW-treated samples but also preserved firmness, sugar-acid ratio and the activities of key enzymes including phenylalanine ammonia-lyase, superoxide dismutase and catalase, and thus maintaining high levels of total phenolics, total ascorbic acid, total anthocyanins, and antioxidants. Consequently, US + SAEW treatment put off the times of decay onset in grapes by 12 days, outperforming both SAEW (8) and US (4) in comparison to CW. These results highlight the potential of US + SAEW as an effective strategy for maintaining grape quality during their postharvest storage period.

Mushroom alcohol(1-octen-3-ol)and other 7 aroma compounds selected from Chinese dry-cured hams can enhance saltiness perception.

Reducing NaCl content in food while maintaining acceptability poses a significant challenge. Odor-induced saltiness enhancement (OISE) emerges as a promising solution. This study utilized gas chromatography-olfactory (GC-O) in conjunction with gas chromatography-mass spectrometry (GC-MS) to identify 37 key volatile compounds in three representative Chinese dry-cured hams. These compounds had an odor activity value (OAV) of ≥1 or a modification frequency (MF) of ≥30%. Subsequently, quantitative descriptive analysis (QDA) identified eight odorants associated with saltiness. These included 1-octen-3-ol, nonanal, heptanal, 2-methylbutanal, 3-methyl-butanal, benzaldehyde, octanal, and 2,6-dimethylpyrazine. Remarkably, these odorants significantly intensified saltiness (P < 0.05) when added to a low-concentration NaCl solution (0.3%), compared to zero or high concentrations (0.75% and 0.8%). As a result, traditional Chinese salty meat products offer a promising source of odorants for enhancing saltiness, compensating for reduced NaCl content through OISE.

Ultrasonic synergistic slightly acidic electrolyzed water processing to improve postharvest storage quality of Chinese bayberry.

In the postharvest storage of Chinese bayberry, microbial loads and exogenous contaminants pose significant challenges, leading to rapid decay and deterioration in quality. This study introduced a synergistic approach, combining ultrasonics and slightly acidic electrolyzed water (US + SAEW), to enhance the postharvest storage quality of Chinese bayberry. This approach was benchmarked against conventional water washing (CW), standalone ultrasonic (US), and slightly acidic electrolyzed water (SAEW) processing. Notably, compared to CW, the US + SAEW method enhanced iprodione and procymidone removal rates by 69.62 % and 72.45 % respectively, improved dirt removal efficiency by 122.87 %, repelled drosophila melanogaster larvae by 58.33 %, and curtailed total bacterial, mold & yeast growth by 78.18 % and 83.09 %. Furthermore, it postponed the appearance of sample decay by 6 days, compared to 4 days for both US and SAEW alone. From a physicochemical perspective, compared to CW-treated samples, US + SAEW processing mitigated weight loss and color deviations, retained hardness, amplified the sugar-acid ratio, augmented activities of phenylalanine ammonia-lyase, superoxide dismutase, and catalase enzymes, suppressed polyphenol oxidase activity and malondialdehyde synthesis, and preserved total phenolic, anthocyanin, and antioxidant levels. These findings underscore the potential of US + SAEW as a strategic tool to preserve the quality of Chinese bayberry during postharvest storage.

Heat source replacement strategy using catalytic infrared: A future for energy saving drying of fruits and vegetables.

Drying is an important process for fruits and vegetables, which requires a lot of heat and the heat sources are mainly coal, electricity, natural gas, and solar energy. Most of the heat is usually wasted due to the long drying process and poor transfer efficiency. The use of coal also pollutes the environment. The national electricity curtailment policy regulates the drying industry. Therefore, the fruits and vegetables drying industry is facing new challenges due to its own development needs and external factors. Catalytic infrared drying (CIR) technology brings solutions to these problems. Compared with other drying technologies, CIR has a high drying efficiency and can effectively reduce the use of electric energy, avoid waste, and minimize pollution of water. However, improper processing conditions still cause quality deficits such as severe browning, and the drying is difficult due to weak infrared penetration. Although CIR has shortcomings, it is still expected to establish an energy-saving and efficient fruit and vegetable drying system.

Ultrasound Intensify the Flavonoid Production of the Willow Bracket Mushroom, Phellinus igniarius (Agaricomycetes), Fermentation Mycelia.

This research aimed to use a novel and effective ultrasound (US) approach for obtaining high bio-compound production, hence proposing strategies for boosting active ingredient biosynthesis. Furthermore, the US promotes several physiological effects on the relevant organelles in the cell, morphological effects on the structure of Phellinus igniarius mycelium, and increases the transfer of nutrients and metabolites. One suitable US condition for flavonoid fermentation was determined as once per day for 7-9 days at a frequency 22 + 40 kHz, power density 120 W/L, treated 10 min, treatment off time 7 s. The flavonoid content and production increased about 47.51% and 101.81%, respectively, compared with the untreated fermentation (P < 0.05). SEM showed that sonication changes the morphology and structure of Ph. igniarius mycelium; TEM reveals the ultrasonic treatment causes organelle aggregation. The ultrasound could affect the metabolism of the biosynthesis of the active ingredients.

Real-time online monitoring technology for sweeping frequency ultrasound (SFU) assisted extraction of amur grape (Vitis amurensis) seed oil.

Sweeping frequency ultrasound (SFU) was used to assist extraction of amur grape (Vitis amurensis) seed (AGS) oil. Extraction conditions and physicochemical properties were optimized and analyzed under different extraction methods. Meanwhile, frequency and time domains were online monitored during SFU assisted extraction of AGS oil. PVDF piezoelectric sensor was used in time domain, and the hydrophone in frequency domain, so as to obtain the time-voltage waveform, signal power, spectrum distribution and other visual models. Physical models of the spatial peak acoustic intensity, charge quantity and work done by electric field force under different ultrasonic conditions were derived. The mathematical model between the work done by electric field force and the spatial peak acoustic intensity under the working state of PVDF piezoelectric sensor was constructed. Results show that the content of AGS oil by SFU assisted extraction was higher than that by organic extraction. Furthermore, the optimal single-frequency was 40 kHz and dual-frequency was 28/33 kHz, and SFU extraction time of 30 min was suitable with higher oil yield of 16.70 % and 16.94 %, respectively. In addition, the selection and combination of SFU also affected the oil oxidation degree. The peak voltage, spatial peak acoustic intensity, signal power and work of electric field force at 28/33 kHz were all higher than those at 40 kHz.

Lignin-ultrasound method: Enhancement of antimicrobial capacity of MoS2-containing films.

To improve the antimicrobial ability of MoS2-containing films, we used lignin and triple-frequency ultrasound for liquid-phase exfoliation (LPE) to obtain MoS2 nanosheets. Photoresponsive antimicrobial films with MoS2 nanosheets, lignin, polyvinyl alcohol and deep eutectic solvents were subsequently prepared. Lignin functionalized the MoS2 nanosheets by chemically linking with S in MoS2 and significantly improved the exfoliation efficiency. Tri-frequency ultrasound produces beneficial effects on the LPE process by creating a more homogeneous sound field and a stronger degree of cavitation. The concentration of MoS2 nanosheets in the exfoliating solution could reach 1.713 mg/mL under the effect of lignin-ultrasound. The antimicrobial ability of the films was analyzed, and the colony-forming units of E. coli and S. aureus could be reduced from 7 × 106 to 1 × 106 cfu/mL under the irradiation of infrared. The lignin in the film undergoes depolymerization and demethoxylation under the irradiation of infrared to have a more phenolic hydroxyl structure, which confers the growth inhibition ability of the films for bacteria that cannot be in close contact with the film. The method we used has some significance for the preparation of MoS2 nanosheets, and composite films prepared from MoS2, and lignin can be used in food packaging, wound antimicrobials, and other fields.

Study of okra pectin prepared by sweeping frequency ultrasound/freeze-thaw pretreatment on corrosion inhibition of ANSI 304 stainless steel in acidic environment.

Green and efficient metal corrosion inhibitors are very essential, and natural okra pectin (OP) can fulfill this need with rational use of resources. OP was prepared by water-alcohol extraction method after freeze-thaw pretreatment (FTP)/sweeping frequency ultrasound pretreatment (SFUP), and used for corrosion inhibition of ANSI 304 stainless steel (304 SS) in 1 M hydrochloric acid (HCl). The molecular weight, hydrodynamic diameter and monosaccharide composition of OP were analyzed to determine the factors on the corrosion inhibition of 304 SS. During SFUP of okra, the time-domain variation of ultrasound field was monitored by piezoelectric film sensor, its frequency-domain variation was monitored by a hydrophone, and analyzed respectively by oscilloscope and spectrum analyzer. Static weight-loss method, electrochemical and microscopic analyses were used to evaluate the corrosion inhibition efficiency of OP at temperatures (25, 30, 40, 50 °C) and concentrations (0, 0.2, 0.5, 1, 2 g·L-1) to optimize corrosion inhibition performance. It was found that OP by FTP and SFUP had higher corrosion inhibition efficiency on metals in acidic environment. According to static weight-loss method, the corrosion inhibition efficiency of OP with concentration of 2 g·L-1 (25 °C) was improved to 90.27 % in the FTP group and 93.53 % in the SFUP group, which 5.14 % and 8.93 % higher than Control (without pretreatment). Meanwhile, the corrosion inhibition efficiency decreased gradually as the temperature increased. OP corrosion inhibition performance fit Langmuir adsorption isothermal model as a mixed adsorption based on physical adsorption. It was a mixed inhibitor to protect 304 SS from corrosion.

Starches modification with rose polyphenols under multi-frequency power ultrasonic fields: Effect on physicochemical properties and digestion behavior.

As the main source of energy for human beings, starch is widely present in people's daily diet. However, due to its high content of rapidly digestive starch, it can cause a rapid increase in blood glucose after consumption, which is harmful to the human body. In the current study, the complexes made from edible rose polyphenols (ERPs) and three starches (corn, potato and pea) with different typical crystalline were prepared separately by multi-frequency power ultrasound (MFPU). The MFPU includes single-frequency modes of 40, 60 kHz and dual-frequency of 40 and 60 kHz in sequential and simultaneous mode. The results of the amount of complexes showed that ultrasound could promote the formation of polyphenol-starch complexes for all the three starches and the amount of ERPs in complexes depended on the ultrasonic parameters including treatment power, time and frequency. Infrared spectroscopy and X-ray diffraction indicated that ERPs with or without ultrasound could interact with the three starches through non-covalent bonds to form non-V-type complexes. Scanning electron microscopy showed that the shape of starches changed obviously from round/oval to angular and the surface of the starches were no longer smooth and appeared obvious pits, indicating that the ultrasonic field destroyed the structure of starches. In addition, compared to the control group, the in vitro digestibility study with 40/60 kHz sonication revealed that ultrasonic treatment greatly improved the digestive properties of the polyphenol-starch complexes by significantly increasing the content of resistant starch (20.31%, 17.27% and 14.98%) in the three starches. Furthermore, the viscosity properties of the three starches were all decreased after ERPs addition and the effect was enhanced by ultrasound both for single- and dual-frequency. In conclusion, ultrasound can be used as an effective method for preparing ERPs-starch complexes to develop high value-added products and low glycemic index (GI) foods.

Effect of dual-frequency thermosonication, food matrix, and germinants on Alicyclobacillus acidoterrestris spore germination.

The off-odors associated with spoilage of acidic beverages are linked to the germination and growth of Alicyclobacillus acidoterrestris (AAT) spores. As a consequence, we determined the influence of nutrients, non-nutrient germinants, dual-frequency thermosonication (DFTS), and food matrix on spore germination. AAT spores in orange juice (OJ), supplemented by L-alanine (L-ala), had the highest germination rate and lowest DPA content at 10 h of incubation. The formation of microscopic pores in cell membranes during DFTS caused irreversible damage in AAT spores in citrate buffer solution (CBS); however, it stimulated AAT spore germination in CBS containing L-ala. Hence, the germination potential was established in the order: L-ala > Calcium dipicolinate > asparagine, glucose, fructose, and potassium ion mixture (AGFK) > L-valine. The conductivity analysis indicated that membrane damage could be a key factor contributing to the artificial germination in CBS. AFM images revealed that after 2 h of adding L-ala, the protein content increased with increased germinated cells. TEM showed that membrane poration and coat detachment were the main pre-germination morphological changes detected after DFTS treatment. This study provides evidence that germination stimulated with DFTS might be an effective strategy for reducing A. acidoterrestris spores in fruit juices.

A pH-sensitive intelligent packaging film harnessing Dioscorea zingiberensis starch and anthocyanin for meat freshness monitoring.

Abundant starch was isolated from Dioscorea zingiberensis C.H. Wright, a novel and underutilized industrial crop resource. In this study, an intelligent packaging film able to indicate food freshness was developed and characterized. D. zingiberensis starch (DZS) was bleached first, and its particle size, total starch content, amylose content, and gelatinization temperature were then measured. Butterfly pea (Clitoria ternatea Linn.) flowers were selected as the source of polyphenols, which rendered the prepared film intelligent and progressively blue-violet. SEM and FT-IR analyses showed the homogeneous dispersion of butterfly pea flower extract (BPE) in the film. The BPE-loaded film showed improved flexibility and resistance to UV and oxidation while maintaining sufficient mechanical strength and physical properties. Moreover, the film underwent a distinguishable color change from red to blue-violet and finally to green-yellow with increasing pH from 2 to 13. Similar color alteration also occurred when the film was exposed to ammonia. When the film was used to monitor the freshness of chicken stored at room temperature, it exhibited an obvious color change, implying its deterioration. Therefore, the newly developed BPE-DZS film, which was produced from readily accessible natural substances, can serve as an intelligent packaging material, indicating food freshness and prolonging shelf life.

Research progress and application of ultrasonic- and microwave-assisted food processing technology.

Microwaves are electromagnetic waves of specific frequencies (300 MHz-3000 GHz), whereas ultrasonic is mechanical waves of specific frequencies. Microwave and ultrasonic technology as a new processing method has been widely used in food processing fields. Combined ultrasonic and microwave technology is exploited by researchers as an improvement technique and has been successfully applied in food processing such as thawing, drying, frying, extraction, and sterilization. This paper overviews the principle and characteristics of ultrasonic- and microwave-assisted food processing techniques, particularly their combinations, design of equipment, and their applications in the processing of agricultural products such as thawing, drying, frying, extraction, and sterilization. The combination of ultrasonic and microwave is applied in food processing, where microwave enhances the heating rate, and ultrasonic improves the efficiency of heat and mass transfer. The synergy of the heating effect of microwave and the cavitation effect of ultrasonic improves processing efficiency and damages the cell structure of the material. The degradation of nutrient composition and energy consumption due to the short processing time of combined ultrasonic and microwave technology is decreased. Ultrasonic technology, as an auxiliary means of efficient microwave heating, is pollution-free, highly efficient, and has a wide range of applications in food processing.