5†kW power-level 1050†nm narrow-linewidth fiber amplifier enabled by biconical-tapered active fiber.

Effective wavelength extension is vital in the applications of high-power narrow-linewidth fiber lasers. In this work, we demonstrate a 5-kW power-level narrow-linewidth fiber amplifier at 1050 nm utilizing a homemade biconical-tapered Yb-doped fiber (BT-YDF). Up to ∼4.96 kW fiber laser is achieved with a 3 dB linewidth of ∼0.54 nm and a beam quality factor of Mx 2 = 1.46, My 2 = 1.6. The experimental comparisons reveal that BT-YDF has the advantages of improving a stimulated Raman scattering threshold and balancing transverse mode instability suppression in the fiber amplifier. This work could provide a good reference for extending the operating wavelength of high-power fiber amplifiers.

General error analysis of matrix-operation-mode decomposition technique in few-mode fiber laser.

The mode decomposition based on matrix operation (MDMO) is one of the fastest mode decomposition (MD) techniques, which is important to the few-mode fiber laser characterization and its applications. In this paper, the general error of the MDMO technique was analyzed, where different influencing factors, such as position deviation of the optical imaging system, coordinate deviation of the image acquisition system, aberrations, and mode distortion were considered. It is found that the MDMO technique based on far-field intensity distribution is less affected by optical imaging system position deviation, coordinate deviation of the image acquisition system, and mode distortion than those based on direct near-field decomposition. But far-field decomposition is more affected by aberration than those based on near-field decomposition. In particular, the numerical results show that the deviation of the coordinate axis direction is an important factor limiting the accuracy of MD. In addition, replacing the ideal eigenmode basis with a distorted eigenmode basis can effectively suppress the decrease in mode decomposition accuracy caused by fiber bending. Moreover, based on detailed numerical analysis results, fitting formulas for estimating the accuracy of the MDMO technique with imperfections are also provided, which provides a comprehensive method for evaluating the accuracy of the MDMO technique in practical engineering operations.

Coherent beam combining of two all-PM thulium-doped fiber chirped pulse amplifiers.

In this paper, we report a coherent beam combining (CBC) system that involves two thulium-doped all-polarization maintaining (PM) fiber chirped pulse amplifiers. Through phase-locking the two channels via a fiber stretcher by using the stochastic parallel gradient descent (SPGD) algorithm, a maximum average power of 265 W is obtained, with a CBC efficiency of 81% and a residual phase error of λ/17. After de-chirping by a pair of diffraction gratings, the duration of the combined laser pulse is compressed to 690 fs. Taking into account the compression efficiency of 90% and the main peak energy proportion of 91%, the corresponding peak power is calculated to be 4 MW. The laser noise characteristics before and after CBC are examined, and the results indicate that the CBC would degrade the low frequency relative intensity noise (RIN), of which the integration is 1.74% in [100 Hz, 2 MHz] at the maximum combined output power. In addition, the effects of the nonlinear spectrum broadening during chirped pulse amplification on the CBC efficiency are also investigated, showing that a higher extent of pulse stretching is effective in alleviating the spectrum broadening and realizing a higher output power with decent combining efficiency.

GMOIT: a tool for effective screening of genetically modified crops.

BACKGROUND: Advancement in agricultural biotechnology has resulted in increasing numbers of commercial varieties of genetically modified (GM) crops worldwide. Though several databases on GM crops are available, these databases generally focus on collecting and providing information on transgenic crops rather than on screening strategies. To overcome this, we constructed a novel tool named, Genetically Modified Organisms Identification Tool (GMOIT), designed to integrate basic and genetic information on genetic modification events and detection methods. RESULTS: At present, data for each element from 118 independent genetic modification events in soybean, maize, canola, and rice were included in the database. Particularly, GMOIT allows users to customize assay ranges and thus obtain the corresponding optimized screening strategies using common elements or specific locations as the detection targets with high flexibility. Using the 118 genetic modification events currently included in GMOIT as the range and algorithm selection results, a "6 + 4" protocol (six exogenous elements and four endogenous reference genes as the detection targets) covering 108 events for the four crops was established. Plasmids pGMOIT-1 and pGMOIT-2 were constructed as positive controls or calibrators in qualitative and quantitative transgene detection. CONCLUSIONS: Our study provides a simple, practical tool for selecting, detecting, and screening strategies for a sustainable and efficient application of genetic modification.

Ultrafast laser state active controlling based on anisotropic quasi-1D material.

Laser state active controlling is challenging under the influence of inherent loss and other nonlinear effects in ultrafast systems. Seeking an extension of degree of freedom in optical devices based on low-dimensional materials may be a way forward. Herein, the anisotropic quasi-one-dimensional layered material Ta2PdS6 was utilized as a saturable absorber to modulate the nonlinear parameters effectively in an ultrafast system by polarization-dependent absorption. The polarization-sensitive nonlinear optical response facilitates the Ta2PdS6-based mode-lock laser to sustain two types of laser states, i.e., conventional soliton and noise-like pulse. The laser state was switchable in the single fiber laser with a mechanism revealed by numerical simulation. Digital coding was further demonstrated in this platform by employing the laser as a codable light source. This work proposed an approach for ultrafast laser state active controlling with low-dimensional material, which offers a new avenue for constructing tunable on-fiber devices.

Simplified expression for transverse mode instability threshold in high power fiber lasers.

In this work, we propose an analytical expression for calculating the transverse mode instability (TMI) threshold power, which clearly shows the role of various fiber parameters and system parameters. The TMI threshold expression is obtained by solving the heat conduction equation and the nonlinear coupling equation using the fundamental mode fitted by Gaussian functions. The calculation results of the proposed TMI threshold expression are consistent with the experimental phenomena and simulation results from the well-recognized theoretical model. The influence of some special parameters on the TMI threshold and the power scaling is also investigated. This work will be helpful for fiber design and TMI mitigation of high-power fiber lasers.

Influence of wavelength, linewidth, and temperature on second harmonic generation of a superfluorescent fiber source.

Low-coherence tunable visible light sources have a wide range of applications in imaging, spectroscopy, medicine, and so on. Second harmonic generation (SHG) based on a superfluorescent fiber source (SFS) can produce high-brightness visible light while retaining most of the characteristics of superfluorescent sources, such as low coherence, low intensity noise and flexible tunability. However, due to the limitations in phase matching conditions, SHG based on SFS is difficult to reach an equilibrium between high efficiency and robustness of phase matching to temperature variation. In this paper, based on a spectral tunable SFS, we provide a comprehensive analysis, both experimental and theoretical, of the impact of wavelength, linewidth, and temperature on the output performance of SHG. Our findings indicate that broader linewidths adversely affect conversion efficiency, yet they enhance the capacity to withstand temperature variations and central wavelength detuning, which is an advantage that traditional SHG methods do not possess. This work may pave the way for utilizing low-coherence visible light in domains and extreme environments where robust output stability becomes imperative.

Phosphorus-doped fiber for flat octave spanning supercontinuum generation.

In a fiber supercontinuum (SC) source, the Raman scattering effect plays a significant role in extending the spectrum into a longer wavelength. Here, by using a phosphorus-doped fiber with a broad Raman gain spectrum as the nonlinear medium, we demonstrate flat SC generation spanning from 850 to 2150 nm. Within the wavelength range of 1.1-2.0 µm, the spectral power density fluctuation is less than 7 dB. Compared to a similar SC source based on a germanium-doped fiber with narrower Raman gain spectrum, the wavelength span is 300 nm broader, and the spectral power density fluctuation is 5 dB lower. This work demonstrates the phosphorus-doped fiber's great advantage in spectrally flat SC generation, which is of great significance in many applications such as optical coherence tomography, absorption spectroscopy, and telecommunication.

High power tunable Raman fiber laser at 1.2 µm waveband.

Development of a high power fiber laser at special waveband, which is difficult to achieve by conventional rare-earth-doped fibers, is a significant challenge. One of the most common methods for achieving lasing at special wavelength is Raman conversion. Phosphorus-doped fiber (PDF), due to the phosphorus-related large frequency shift Raman peak at 40 THz, is a great choice for large frequency shift Raman conversion. Here, by adopting 150 m large mode area triple-clad PDF as Raman gain medium, and a novel wavelength-selective feedback mechanism to suppress the silica-related Raman emission, we build a high power cladding-pumped Raman fiber laser at 1.2 µm waveband. A Raman signal with power up to 735.8 W at 1252.7 nm is obtained. To the best of our knowledge, this is the highest output power ever reported for fiber lasers at 1.2 µm waveband. Moreover, by tuning the wavelength of the pump source, a tunable Raman output of more than 450 W over a wavelength range of 1240.6-1252.7 nm is demonstrated. This work proves PDF's advantage in high power large frequency shift Raman conversion with a cladding pump scheme, thus providing a good solution for a high power laser source at special waveband.

Single-frequency pulsed fiber laser based on an electro-optic modulator with injection seeding technique.

A single-frequency linearly polarization pulsed fiber laser based on an electro-optic modulator with injection seeding technique is demonstrated. The single-frequency performance of the fiber ring-cavity laser is guaranteed by the seed source, which is a distributed-feedback fiber laser based on the π-phase-shifted fiber Bragg grating. The electro-optic modulator triggers active Q-switching of the laser for pulse generation. The devices used in the fiber laser are all polarization-maintaining to ensure linear polarization laser output. Through parameter optimization, the laser generates a single-frequency linearly polarization pulsed laser with a central wavelength of 1064.22 nm, linewidth of 35 MHz, and polarization extinction ratio of better than 40 dB. This type of fiber laser can be applied in lidar, beam combining, nonlinear frequency conversion, and other fields.

Monolithic tapered Yb-doped fiber chirped pulse amplifier delivering 126 µJ and 207 MW femtosecond laser with near diffraction-limited beam quality.

In this work, a high-energy and high peak power chirped pulse amplification system with near diffraction-limited beam quality based on tapered confined-doped fiber (TCF) is experimentally demonstrated. The TCF has a core numerical aperture of 0.07 with core/cladding diameter of 35/250 µm at the thin end and 56/400 µm at the thick end. With a backward-pumping configuration, a maximum single pulse energy of 177.9 µJ at a repetition rate of 504 kHz is realized, corresponding to an average power of 89.7 W. Through partially compensating for the accumulated nonlinear phase during the amplification process via adjusting the high order dispersion of the stretching chirped fiber Bragg grating, the duration of the amplified pulse is compressed to 401 fs with a pulse energy of 126.3 µJ and a peak power of 207 MW, which to the best of our knowledge represents the highest peak power ever reported from a monolithic ultrafast fiber laser. At the highest energy, the polarization extinction ratio and the M2 factor were respectively measured to be ~ 19 dB and 1.20. In addition, the corresponding intensity noise properties as well as the short- and long-term stability were also examined, verifying a stable operation of the system. It is believed that the demonstrated laser source could find important applications in, for example, advanced manufacturing and photomedicine.

Designing nanohesives for rapid, universal, and robust hydrogel adhesion.

Nanoparticles-based glues have recently been shown with substantial potential for hydrogel adhesion. Nevertheless, the transformative advance in hydrogel-based application places great challenges on the rapidity, robustness, and universality of achieving hydrogel adhesion, which are rarely accommodated by existing nanoparticles-based glues. Herein, we design a type of nanohesives based on the modulation of hydrogel mechanics and the surface chemical activation of nanoparticles. The nanohesives can form robust hydrogel adhesion in seconds, to the surface of arbitrary engineering solids and biological tissues without any surface pre-treatments. A representative application of hydrogel machine demonstrates the tough and compliant adhesion between dynamic tissues and sensors via nanohesives, guaranteeing accurate and stable blood flow monitoring in vivo. Combined with their biocompatibility and inherent antimicrobial properties, the nanohesives provide a promising strategy in the field of hydrogel based engineering.

Broadband tunable Raman fiber laser with monochromatic pump.

Raman fiber laser (RFL) has been widely adopted in astronomy, optical sensing, imaging, and communication due to its unique advantages of flexible wavelength and broadband gain spectrum. Conventional RFLs are generally based on silica fiber. Here, we demonstrate that the phosphosilicate fiber has a broader Raman gain spectrum as compared to the common silica fiber, making it a better choice for broadband Raman conversion. By using the phosphosilicate fiber as gain medium, we propose and build a tunable RFL, and compare its operation bandwidth with a silica fiber-based RFL. The silica fiber-based RFL can operate within the Raman shift range of 4.9 THz (9.8-14.7 THz), whereas in the phosphosilicate fiber-based RFL, efficient lasing is achieved over the Raman shift range of 13.7 THz (3.5-17.2 THz). The operation bandwidths of the two RFLs are also calculated theoretically. The simulation results agree well with experimental data, where the operation bandwidth of the phosphosilicate fiber-based RFL is more than twice of that of the silica fiber-based RFL. This work reveals the phosphosilicate fiber's unique advantage in broadband Raman conversion, which has great potential in increasing the reach and capacity of optical communication systems.

Numerical simulation of the internal active phase-locking coherent beam combining system.

As a promising way to realize high output power while maintaining high beam quality, coherent beam combining (CBC) of fiber lasers has drawn much interest. Phase control is one of the main technologies to fulfill CBC, which is employed to keep the phases of different fiber lasers consistent. Traditional phase control techniques employ beam splitters after the emitting array to obtain phase mismatch information. Different from the traditional phase-locking technique, the internal phase control technique can obtain phase mismatch information before the laser array output to free space, and the technique is compact and easy to expand to a lager array. In this paper, a CBC system based on an internal phase-locking technique is designed, and relative numerical simulations are studied. By using the cascaded technique, the phase control bandwidth can be greatly increased. The simulation results show that hundreds of laser beams can be effectively combined based on the technique. The results of the numerical simulations can provide significant reference for the compact CBC system design and phase control.

Generating the 1.5†kW mode-tunable fractional vortex beam by a coherent beam combining system.

As an essential component of the vortex beam, the fractional vortex beam has significantly advanced various applications, such as optical imaging, optical communication, and particle manipulation. However, practical applications face a significant challenge as generating high average power fractional vortex beams remains difficult. Here, we proposed and experimentally demonstrated a high average power mode-tunable fractional vortex beam generator based on an internally sensed coherent beam combining (CBC) system. We presented the first, to the best of our knowledge, successful generation of a 1.5 kW continuous wave fractional vortex beam. Moreover, real-time tuning of the topological charge (TC) from -2/3 to +2/3 was easily achieved using the programmable liquid crystals (LCs). More importantly, the fractional vortex beam copier was presented as well, and the generated fractional vortex beam could be easily transformed into a fractional vortex beam array by changing the fill factor of the laser array. This work can pave the path for the practical implementation of high average power structured light beams.

Magnetic Topological Insulator MnBi2Te4 Nanosheets for Femtosecond Pulse Generation.

The van der Waals layered material MnBi2Te4, as a magnetic topological insulator, has attracted tremendous interest for novel physics research in the fields of condensed matter physics and materials science. However, the nonlinear optical properties of MnBi2Te4 and its applications in ultrafast optics have rarely been explored. In this study, high-quality MnBi2Te4 nanosheets have been successfully synthesized by the self-flux method. The morphology, chemical composition, magnetic properties, and nonlinear optical characteristics were systematically investigated. The magnetic transition of MnBi2Te4 was confirmed by a low-temperature spatially resolved spectroscopic technique. The saturable absorption property of MnBi2Te4 was measured by a balanced twin-detector system with a modulation depth of 4.5% and a saturation optical intensity of 2.35 GW/cm2. Furthermore, by inserting the MnBi2Te4-based saturable absorber, a soliton mode-locking laser operating at 1558.8 nm was obtained with a pulse duration of 331 fs. This research will pave the way for applications of the magnetic TI MnBi2Te4 in nonlinear optics and photonics.

Mitigation of TMI in an 8†kW tandem pumped fiber amplifier enabled by inter-mode gain competition mechanism through bending control.

In this work, the impact of fiber bending and mode content on transverse mode instability (TMI) is investigated. Based on a modified stimulated thermal Rayleigh scattering (STRS) model considering the gain competition between transverse modes, we theoretically detailed the TMI threshold under various mode content and bending conditions in few-mode fibers. Our theoretical calculations demonstrate that larger bending diameters increase the high order mode (HOM) components in the amplifier, which in turn reduces the frequency-shifted Stokes LP11o mode due to the inter-mode gain competition mechanism, thus improving the TMI threshold of few-mode amplifiers. The experimental results agree with the simulation. Finally, by optimizing the bending, an 8.38 kW output tandem pumped fiber amplifier is obtained with a beam quality M2 of 1.8. Both TMI and stimulated Raman scattering (SRS) are well suppressed at the maximum power. This work provides a comprehensive analysis of the TMI in few-mode amplifiers and offers a practical method to realize high-power high-brightness fiber lasers.

Analysis of an image noise sensitivity mechanism for matrix-operation-mode-decomposition and a strong anti-noise method.

Mode decomposition (MD) based on the matrix operation (MDMO) is one of the fastest mode decomposition methods in fiber laser which has great potential for optical communications, nonlinear optics and spatial characterization applications. However, we found that the image noise sensitivity is the main limit to the accuracy of the original MDMO method, but improving the decomposition accuracy by using conventional image filtering methods is almost ineffective. By using the norm theory of matrices, the analysis result shows that both the image noise and the coefficient matrix condition number determine the total upper-bound error of the original MDMO method. Besides, the greater the condition number, the more sensitive of MDMO method is to noise. In addition, it is found that the local error of each mode information solution in the original MDMO method is different, which depends on the L2-norm of each row vector of the inverse coefficient matrix. Moreover, a more noise-insensitive MD method is achieved by screening out the information corresponding to large L2-norm. In particular, selecting the higher accuracy among the original MDMO method and such noise-insensitive method as the result in a single MD process, a strong anti-noise MD method was proposed in this paper, which displays high MD accuracy in strong noise for both near-filed and far-filed MD cases.

Over 250 W low noise core-pumped single-frequency all-fiber amplifier.

A high-power linearly-polarized all-fiber single-frequency amplifier at 1 µm based on tandem core-pumping is demonstrated by using a large-mode-area Ytterbium-doped fiber with a core diameter of 20 µm, which nicely balances the stimulated Brillouin scattering effect, thermal load, and output beam quality. A maximum output power of more than 250 W with a corresponding slope efficiency of >85% is achieved at the operating wavelength of 1064 nm without being constrained by the saturation and nonlinear effects. Meanwhile, a comparable amplification performance is realized with a lower injection signal power of the wavelength near the peak gain of the Yb-doped fiber. The polarization extinction ratio and the M2 factor of the amplifier are respectively measured to be >17 dB and 1.15 under the maximal output power. In addition, by virtue of the single-mode 1018 nm pump laser, the intensity noise of the amplifier under maximal output power is measured to be comparable to that of the single-frequency seed laser at frequencies higher than 2 kHz, except for the emergence of parasitic peaks that can be eliminated by optimizing the driving electronics of the pump lasers, while the deterioration of the amplification process to the frequency noise and linewidth of the laser is negligible. To the best of our knowledge, this is the highest output power of a single-frequency all-fiber amplifier based on the core-pumping scheme.

Mode-modulation-induced high power dual-wavelength generation in a random distributed feedback Raman fiber laser.

An all-fiberized random distributed feedback Raman fiber laser (RRFL) with mode-modulation-induced wavelength manipulation and dual-wavelength generation has been demonstrated, where an electrically controlled intra-cavity acoustically-induced fiber grating (AIFG) is employed to adjust the input modal content at the signal wavelength. The wavelength agility of both the Raman effect and the Rayleigh backscattering in RRFL benefits on broadband laser output in case of broadband pumping. The feedback modal content at different wavelengths can be adjusted by AIFG, and then the output spectral manipulation can be ultimately manifested through the mode competition in RRFL. Under the efficient mode modulation, the output spectrum can be continuously tuned from 1124.3 nm to 1133.8 nm with single wavelength, while ulteriorly the dual-wavelength spectrum can be formed at 1124.1 nm and 1134.7 nm with a signal-noise-ratio of 45 dB. Throughout, the power is beyond 47 W with good stability and repeatability. To the best of our knowledge, this is the first dual-wavelength fiber laser based on mode modulation and the highest output power ever reported for an all-fiberized continuous wave dual-wavelength fiber laser.