RÉSUMÉ
Today's computing systems, to meet the enormous demands of information processing, have driven the development of brain-inspired neuromorphic systems. However, there are relatively few optoelectronic devices in most brain-inspired neuromorphic systems that can simultaneously regulate the conductivity through both optical and electrical signals. In this work, the Au/MXene/Y:HfO2/FTO ferroelectric memristor as an optoelectronic artificial synaptic device exhibited both digital and analog resistance switching (RS) behaviors under different voltages with a good switching ratio (>103). Under optoelectronic conditions, optimal weight update parameters and an enhanced algorithm achieved 97.1% recognition accuracy in convolutional neural networks. A new logic gate circuit specifically designed for optoelectronic inputs was established. Furthermore, the device integrates the impact of relative humidity to develop an innovative three-person voting mechanism with a veto power. These results provide a feasible approach for integrating optoelectronic artificial synapses with logic-based computing devices.
RÉSUMÉ
Neuromorphic computing, which mimics biological neural networks, is widely regarded as the optimal solution for addressing the limitations of traditional von Neumann computing architecture. In this work, an adjustable multistage resistance switching ferroelectric Bi2FeCrO6 diode artificial synaptic device was fabricated using a sol-gel method with a simple process. The device exhibits nonlinearity in its electrical characteristics, demonstrating tunable multistage resistance switching behavior and a strong ferroelectric diode effect through the manipulation of ferroelectric polarization. One of its salient advantages resides in its capacity to dynamically regulate its polarization state in response to an external electric field, thereby facilitating the fine-tuning of synaptic connection strength while maintaining synaptic stability. The device is capable of accurately simulating the fundamental properties of biological synapses, including long/short-term plasticity, paired-pulse facilitation, and spike-timing-dependent plasticity. Additionally, the device exhibits a distinctive photoelectric response and is capable of inducing synaptic plasticity by light signal activation. The utilization of a femtosecond laser for the scrutiny of carrier transport mechanisms imparts profound insights into the intricate dynamics governing the optical memory effect. Furthermore, utilizing a convolutional neural network (CNN) architecture, the recognition accuracy of the MNIST and fashion MNIST datasets was improved to 95.6% and 78%, respectively, through the implementation of improved random adaptive algorithms. These findings present a new opportunity for utilizing Bi2FeCrO6 materials in the development of artificial synapses for neuromorphic computation.
RÉSUMÉ
Compared with purely electrical neuromorphic devices, those stimulated by optical signals have gained increasing attention due to their realistic sensory simulation. In this work, an optoelectronic neuromorphic device based on a photoelectric memristor with a Bi2FeCrO6/Al-doped ZnO (BFCO/AZO) heterostructure is fabricated that can respond to both electrical and optical signals and successfully simulate a variety of synaptic behaviors, such as STP, LTP, and PPF. In addition, the photomemory mechanism was identified by analyzing the energy band structures of AZO and BFCO. A convolutional neural network (CNN) architecture for pattern classification at the Mixed National Institute of Standards and Technology (MNIST) was used and improved the recognition accuracy of the MNIST and Fashion-MNIST datasets to 95.21% and 74.19%, respectively, by implementing an improved stochastic adaptive algorithm. These results provide a feasible approach for future implementation of optoelectronic synapses.
RÉSUMÉ
Resistive random-access memory (RRAM) is a promising candidate for next-generation non-volatile memory. However, due to the random formation and rupture of conductive filaments, RRMS still has disadvantages, such as small storage windows and poor stability. Therefore, the performance of RRAM can be improved by optimizing the formation and rupture of conductive filaments. In this study, a hafnium oxide-/aluminum-doped zinc oxide/hafnium oxide (HfO2/Al-ZnO/HfO2) tri-layer structure device was prepared using the sol-gel method. The oxygen-rich vacancy Al-ZnO layer was inserted into the HfO2 layers. The device had excellent RS properties, such as an excellent switch ratio of 104, retention of 104 s, and multi-level storage capability of six resistance states (one low-resistance state and five high-resistance states) and four resistance states (three low-resistance states and one high-resistance state) which were obtained by controlling stop voltage and compliance current, respectively. Mechanism analysis revealed that the device is dominated by ohmic conduction and space-charge-limited current (SCLC). We believe that the oxygen-rich vacancy concentration of the Al-ZnO insertion layer can improve the formation and rupture behaviors of conductive filaments, thereby enhancing the resistive switching (RS) performance of the device.
RÉSUMÉ
Self-assembled heteroepitaxial nanostructures have played an important role for miniaturization of electronic devices, e.g., the ultrahigh density ferroelectric memories, and cause for great concern. Our first principle calculations predict that the materials with low formation energy of the interface ( Ef) tend to form matrix structure in self-assembled heteroepitaxial nanostructures, whereas those with high Ef form nanopillars. Under the guidance of the theoretical modeling, perovskite BiFeO3 (BFO) nanopillars are swimmingly grown into CeO2 matrix on single-crystal (001)-SrTiO3 (STO) substrates by pulsed laser deposition, where CeO2 has a lower formation energy of the interface ( Ef) than BFO. This work provides a good paradigm for controlling self-assembled nanostructures as well as the application of self-assembled ferroelectric nanoscale memory.
RÉSUMÉ
In the era of Internet of Things, the demand for flexible and transparent electronic devices has shifted to the forefront of materials science research. However, the radiation damage to key performance of transparent devices under radiative environment remains as a critical issue. Here, we present a promising technology for nonvolatile transparent electronic devices based on flexible oxide heteroepitaxy. A direct fabrication of epitaxial lead lanthanum zirconate titanate on transparent flexible mica substrate with indium tin oxide electrodes is presented. The transparent flexible ferroelectric heterostructures not only retain their superior performance, thermal stability, reliability, and mechanical durability, but also exhibit remarkably robust properties against to a strong radiation exposure. Our study demonstrates an extraordinary concept to realize transparent flexible nonvolatile electronic devices for the design and development of next-generation smart devices with potential application in electronics, automotive, aerospace, and nuclear systems.
RÉSUMÉ
Flexible non-volatile memories have received much attention as they are applicable for portable smart electronic device in the future, relying on high-density data storage and low-power consumption capabilities. However, the high-quality oxide based nonvolatile memory on flexible substrates is often constrained by the material characteristics and the inevitable high-temperature fabrication process. In this paper, a protocol is proposed to directly grow an epitaxial yet flexible lead zirconium titanate memory element on muscovite mica. The versatile deposition technique and measurement method enable the fabrication of flexible yet single-crystalline non-volatile memory elements necessary for the next generation of smart devices.
Sujet(s)
Électronique/méthodes , Mémoire/physiologieRÉSUMÉ
We present a promising technology for nonvolatile flexible electronic devices: A direct fabrication of epitaxial lead zirconium titanate (PZT) on flexible mica substrate via van der Waals epitaxy. These single-crystalline flexible ferroelectric PZT films not only retain their performance, reliability, and thermal stability comparable to those on rigid counterparts in tests of nonvolatile memory elements but also exhibit remarkable mechanical properties with robust operation in bent states (bending radii down to 2.5 mm) and cycling tests (1000 times). This study marks the technological advancement toward realizing much-awaited flexible yet single-crystalline nonvolatile electronic devices for the design and development of flexible, lightweight, and next-generation smart devices with potential applications in electronics, robotics, automotive, health care, industrial, and military systems.
RÉSUMÉ
The aim of this study was to investigate the influence of neonatal isolation stress on hyperlocomotion in complexin II knockout mouse (Cplx2(-/-)). The mice were randomly divided into 4 groups: Cplx2(-/-) with stress, Cplx2(+/+) with stress, Cplx2(-/-) without stress and Cplx2(+/+) without stress. Isolation stress was employed on the pups of stress groups from the 2nd day after the postnatal to the 21st day. The PCR was used to determine the gene type and the hyperlocomotion test was employed to detect the change of animal behavior after methamphetamine or saline injection (i.p.). The results showed that the animals of all groups increased their movement after injection of 0.2 mg/kg methamphetamine in different levels (P < 0.01), compared with those injected with saline. The Cplx2(-/-) mouse with stress revealed a significant increase in the distance of free movement after injection of 0.2 mg/kg methamphetamine compared with the knockout mouse without stress (P < 0.001). When Cplx2(-/-) mouse with stress was compared with wild type with stress, Cplx2(-/-) mouse with stress had more movement (P < 0.001), indicating that Cplx2 has effect on the hyperlocomotion as well. These results suggest an involvement of stress and Cplx2 in the movement behavior of mice.