RÉSUMÉ
Refining the anomalous dispersion parameters of the four uranium compounds NaUF5, NaU2F9, Cs2(UO2)TiO4, and Cs2(UO2)Ti2O6 gave insights into the crystallographic model improvement of very heavy atoms. We found that the values for the dispersive and absorptive parts, f' and fâ³, closely followed the X-ray absorption spectra on their L3, L2, and L1 edges. The obtained values are sensitive to the chemical environment at each crystallographically independent position. An incorrect treatment of the anomalous dispersion correction can lead to a wrong crystallographic model. The above-mentioned, already published structures were improved by this process. General guidelines were given for the crystal structure determination of very heavy compounds. When using Mo Kα radiation with uranium compounds, the proximity of its energy to the uranium L-edges causes a noticeable effect.
RÉSUMÉ
Neodymium is typically considered the best surrogate for trivalent americium and can be used to identify Am3+ containing materials that are likely to form. We have explored the alkaline-earth lanthanide borate phase space using alkaline-earth halide/carbonate fluxes. This resulted in the synthesis of new compounds AE5Ln(BO3)4X (AE = Ca, Sr; Ln = Pr, Nd, Eu, Tb; X = Cl, Br) and AE3Ln2(BO3)4 (AE = Sr, Ba; Ln = Pr, Nd) as well as the synthesis of two compounds of Ba8Ln2(BO3)6(B2O5) (Ln = Eu, Tb) crystallizing in a new structure type. Ba8Ln2(BO3)6(B2O5) crystallizes in the space group P21/n with lattice parameters a = 8.6002(3) Å, b = 7.9245(3) Å, c = 17.6697(7) Å, and ß = 91.3560(10)° for the Eu analogue, and the structure contains isolated LnO8 polyhedra connected into a framework by BO3 and B2O5 units. The fluorescence emission spectra of AE5Ln(BO3)4X (AE = Ca, Sr; Ln = Eu, Tb; X = Cl, Br) and Ba8Ln2(BO3)6(B2O5) (Ln = Eu, Tb) are reported.
RÉSUMÉ
We report on the detailed structural analysis of a series of 11 new quaternary rare earths containing thiosilicates, AkRE2Si2S8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, Sm, Gd, and Tb), synthesized using the flux-assisted boron chalcogen mixture method. High quality crystals were grown and used to determine their crystal structures by single crystal X-ray diffraction. All members of the AkRE2Si2S8 series crystallize in the trigonal crystal system with space group R3Ì c (space group no. 167). Polycrystalline powders were used for physical property measurements, including magnetic susceptibility, diffuse reflectance in the UV-visible range, and scintillation. Magnetic measurements indicated that CaRE2Si2S8 (RE = Nd and Tb) exhibits paramagnetic behavior with a slightly negative Weiss constant. The band gaps of the materials were determined from diffuse reflectance data, and optical band gaps were estimated to be 2.5(1) and 2.9(1) eV for CaCe2Si2S8 and CaGd2Si2S8, respectively. CaCe2Si2S8, CaTb2Si2S8, and SrCe2Si2S8 exhibited intense green luminescence upon irradiation with 375 nm ultraviolet light and, furthermore, scintillated when exposed to X-rays. Radioluminescence measurements of CaCe2Si2S8 powder revealed green emission with an intensity approximately 14% of that emitted by bismuth germanium oxide powder.
RÉSUMÉ
Zeolites are versatile materials renowned for their extra-framework cation exchange capabilities, with applications spanning diverse fields, including nuclear waste treatment. While detailed experimental characterization offers valuable insight, density functional theory (DFT) proves particularly adept at investigating ion exchange in zeolites, owing to its atomic and electronic resolution. However, the prevalent occurrence of zeolitic ion exchange in aqueous environments poses a challenge to conventional DFT modeling, traditionally conducted in a vacuum. This study seeks to enhance zeolite modeling by systematically evaluating predictive differences across varying degrees of aqueous solvent inclusion. Specifically focusing on monovalent cation exchange in Na-X zeolites, we explore diverse modeling approaches. These range from simple dehydrated systems (representing bare reference states in vacuum) to more sophisticated models that incorporate aqueous solvent effects through explicit water molecules and/or a dielectric medium. Through comparative analysis of DFT and semi-empirical DFT approaches, along with their validation against experimental results, our findings underscore the necessity to concurrently consider explicit and implicit solvent effects for accurate prediction of zeolitic ionic exchange.
RÉSUMÉ
In actinide systems, the 5felectrons experience a uniquely delicate balance of effects and interactions having similar energy scales, which are often difficult to properly disentangle. This interplay of factors such as the dual nature of 5f-states, strong electronic correlations, and strong spin-orbit coupling results in electronically unusual and intriguing behavior such as multi-k antiferromagnetic ordering, multipolar ordering, Mott-physics, mixed valence configurations, and more. Despite the inherent allure of their exotic properties, the exploratory science of even the more basic, binary systems like the actinide oxides has been limited due to their toxicity, radioactivity, and reactivity. In this article, we provide an overview of the available synthesis techniques for selected binary actinide oxides, including the actinide dioxides, sesquioxides, and a selection of higher oxides. For these oxides, we also review and evaluate the current state of knowledge of their crystal structures and magnetic properties. In many aspects, substantial knowledge gaps exist in the current body of research on actinide oxides related to understanding their electronic ground states. Bridging these gaps is vital for improving not only a fundamental understanding of these systems but also of future nuclear technologies. To this end, we note the experimental techniques and necessary future investigations which may aid in better elucidating the nature of these fascinating systems.
RÉSUMÉ
A new series of mixed-anion alkali rare earth silicate fluorides with composition Rb2Ln[Si2O6]F (Ln = Y, Eu-Lu) has been synthesized via an alkali chloride/fluoride eutectic flux synthetic route. All synthesized compositions crystallize in the tetragonal space group P42/mnm with a 3D framework consisting of LnO4F2 octahedra, tetrasilicate rings, and 1D channels containing alkali metals. A combination of powder X-ray diffraction, single-crystal X-ray diffraction, and luminescence emission spectroscopy was performed to characterize the reaction products. In addition, density functional theory (DFT) calculations were utilized to calculate the 0 K formation enthalpies of the synthesized phases and of hypothetical trivalent actinide analogues to probe the likelihood of the successful synthesis of such trivalent transuranic containing phases, specifically Am and Cm, in the future.
RÉSUMÉ
A series of transition-metal-containing rare earth thiosilicates, RE3TM0.5SiS7 (RE = Gd-Yb; TM = Fe, Co, Ni), was obtained via flux crystal growth utilizing the boron chalcogen mixture (BCM) method. The series includes the first reported ytterbium-containing thiosilicates crystallizing in this structure type. The thiosilicates crystallize in the hexagonal crystal system in space group P63. The use of the BCM method to synthesize phase-pure samples of the title compounds for magnetic measurements is discussed, highlighting how the approach avoids some of the difficulties that plague typical chalcogenide syntheses. Magnetic measurements demonstrate that some of the compounds order antiferromagnetically and exhibit transition temperatures below 15 K.
RÉSUMÉ
The uranium-containing 2H-perovskite-related chalcogenide family of compounds was revisited using the recently developed boron-chalcogen mixture (BCM) method for actinides to aid in their syntheses and to obtain magnetic measurements. Two known 2H-perovskite-related structures, Ba3MnUS6 and Ba3FeUS6, were synthesized using the BCM method and were found to exhibit antiferromagnetic transitions at TN = â¼7.6 and 10.8 K, respectively. Combining the BCM method with the molten flux crystal growth technique resulted in single crystals of three new compositions, Ba3NiUS6, Ba3CoUS6, and Ba3Co0.858(5)Mg0.142(5)US6, the synthesis and characterization of which is reported. Magnetic measurements of Ba3NiUS6 revealed a complex magnetic susceptibility consisting of a weak, glassy, antiferromagnetic transition near 65 K followed by an antiferromagnetic transition at TN = â¼18 K. A reduced radius ratio plot for the existing chalcogenide compositions and new additions to this structure type reported herein is presented to aid in the search for additional 2H-perovskite-related sulfides.
RÉSUMÉ
Geometric magnetic frustration arises when the geometry of a structure prevents the simultaneous fulfillment of nearest-neighbor antiferromagnetic interactions and is commonly observed in lattices that exhibit a triangular topology, such as those found in the pyrochlore structure. Via a mild hydrothermal route, we have synthesized seven quaternary ß-pyrochlore-related fluorides AxM2+xM3+(2-x)F6 (A = Cs and Rb; M2+ = Co2+, Ni2+, and Zn2+; and M3+ = V3+ and Fe3+). Crystal structures and compositions were determined using a combination of single-crystal X-ray diffraction and energy-dispersive spectroscopy. After adjusting the reaction conditions, phase-pure products of AxM2+xM3+(2-x)F6 were obtained. The magnetic susceptibility and isothermal magnetization data for all seven compounds were collected to interpret the magnetic behavior, which ranged from paramagnetic to antiferromagnetic with and without a ferromagnetic component. We found that the magnetic behavior of the AxM2+xV3+(2-x)F6 pyrochlore structures strongly depends on the presence or absence of unpaired electrons on the M2+ position. The titled pyrochlore compounds, with the exception of the Zn-analogue, can be considered frustrated materials, with frustration indices in the range of 6-13.
RÉSUMÉ
Mild hydrothermal synthesis was employed to grow high-quality single crystals of ternary fluoridohafnates at low temperatures. The series of new materials was characterized using single-crystal X-ray diffraction, and the crystal structures of AHfF6 (A = Mg and Sr), A2HfF8 (A = Ba and Pb), Ca5Hf3F22, and Cd2HfF8(H2O)6 are discussed herein. Although some material compositions have similar stoichiometries, all of the compositions adopt different structural motifs. A comparison of the crystal structures and synthesis techniques of ternary fluoridohafnates and ternary fluoridozirconates is also reported, and the impact of the subtle changes of synthesis conditions on overall structures is discussed.
RÉSUMÉ
Single crystals of four new cesium copper silicates were grown from CsCl/CsF flux. [CsCs4Cl][Cu2Si8O20] is a salt-inclusion compound that crystallizes in space group P4/m with lattice parameters a = 12.2768(3) Å and c = 8.6470(2) Å; Cs6Cu2Si9O23 crystallizes in space group P21/n with lattice parameters a = 15.0763(9) Å, b = 6.9654(4) Å, c = 26.9511(17) Å, and ß = 99.240(2)°; Cs8Cu3Si14O35 crystallizes in space group C2/c with a = 39.2236(13) Å, b = 6.9658(2) Å, c = 14.9115(5) Å, and ß = 97.1950(10)°; and Cs2CuSi3O8 is a member of the stuffed tridymite family and crystallizes in a monoclinic distortion of the CsAlSiO4 structure type with space group C2/m and a = 12.8587(3) Å, b = 5.38510(10) Å, c = 9.0440(2) Å, and ß = 133.2580(10)°. All four compounds contain CuO4-flattened tetrahedra. The degree of flattening can be correlated with the UV-vis spectra. Cs6Cu2Si9O23 exhibits spin dimer magnetism that can be attributed to super-super-exchange between two Cu(II) ions connected by a silicate tetrahedron. The other three compounds all show paramagnetic behavior down to 2 K.
RÉSUMÉ
Single crystals of A3MF6 (A = Rb, Cs; M = Al, Ga) were grown from mixed alkali chloride/fluoride fluxes in sealed silver tubes. For Cs3AlF6 and Cs3GaF6, two polymorphs were observed at room temperature: m-Cs3MF6 and o-Cs3MF6. For the two Rb containing compositions, only one room temperature polymorph was observed: o-Rb3AlF6 and t-Rb3GaF6, respectively. Simultaneous TGA/DSC and high temperature SCXRD/PXRD were used to study the high temperature behavior of A3MF6. The compounds of all four compositions were found to undergo structure transitions upon heating to the same cubic structure type, c-A3MF6.
RÉSUMÉ
Nine new rare earth magnesium-containing thiosilicates of the formula RE3Mg0.5SiS7 (Ln = Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er) were synthesized in an alkali halide flux using the boron chalcogen mixture (BCM) method. Crystals of high quality were produced, and their structures were determined by single-crystal X-ray diffraction. The compounds crystallize in the hexagonal crystal system in the P63 space group. Phase pure powders of the compounds were used for magnetic susceptibility measurements and for second-harmonic generation (SHG) measurements. Magnetic measurements indicate that Ce3Mg0.5SiS7, Sm3Mg0.5SiS7, and Dy3Mg0.5SiS7 exhibit paramagnetic behavior with a negative Weiss temperature over the 2-300 K temperature range. SHG measurements of La3Mg0.5SiS7 demonstrated SHG activity with an efficiency of 0.16 times the standard potassium dihydrogen phosphate (KDP).
RÉSUMÉ
As part of our exploration of plutonium-containing materials as potential nuclear waste forms, we report the first extended structure Pu(V) material and the first Pu(V) borate. Crystals of Na2(PuO2)(BO3) were grown out of mixed hydroxide/boric acid flux and found to crystallize in the orthorhombic space group Cmcm with lattice parameters of a = 9.9067(4) Å, b = 6.5909(2) Å, and c = 6.9724(2) Å. Na2(PuO2)(BO3) adopts a layered structure in which layers of PuO2(BO3)2- are separated by sodium cations. Plutonium is found in a pentagonal bipyramidal coordination environment, with axial Pu(V)-O plutonyl bond lengths of 1.876(3) Å and equatorial Pu-O bond lengths ranging from 2.325(5) to 2.467(3) Å. We find that the Pu(V)-O plutonyl bond lengths are approximately 0.1 Å longer than the reported Pu(VI)-O plutonyl bond lengths and shorter by approximately 0.033 Å than the corresponding U(V) uranyl bond lengths. Raman spectroscopy on single crystals was used to determine the PuO2+ plutonyl stretching and the equatorial breathing mode frequencies of the pentagonal bipyramidal coordination environment around plutonium. Density functional theory calculations were used to calculate the Raman spectrum to help identify the Raman bands at 690 and 630 cm-1 as corresponding to the plutonyl(V) ν1 stretch and the equatorial PuO5 breathing mode, respectively. UV-vis measurements on single crystals indicate semiconducting behavior with a band gap of â¼2.60 eV.
RÉSUMÉ
A novel series of heterometallic f-block-frameworks including the first examples of transuranic heterometallic 238 U/239 Pu-metal-organic frameworks (MOFs) and a novel monometallic 239 Pu-analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)-MOF formation and reported the first value of a U-to-Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid-state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An-integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An-containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.
RÉSUMÉ
A series of quaternary Np(IV) fluorides was synthesized using a mild hydrothermal synthesis approach. The compositions are all of the type NaxMNp6F30, where M = Ti(III), V(III), Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Al(III), and Ga(III) and x = 4 for divalent metals, x = 3 for trivalent metals. The compounds all crystallize in the P-3c1 space group and are isotypic with actinide analogues NaxMAn6F30 (An = Ce, U, Th, Pu). Structure data from the neptunium crystals were combined with data from the other actinide analogues to establish the tetravalent, nine-coordinated ionic radii of neptunium (1.030(2) Å), plutonium (1.014(1) Å), and cerium (1.012(2) Å). Radiation damage studies were also carried out on a surrogate material, the cerium analogue Na3AlCe6F30, which indicates that the structure type has low resistance to amorphization. Density functional theory calculations were carried out to compute the band gaps and enthalpies of formation variations among the isotypic cerium and actinide structures to compare the stability of the structures.
RÉSUMÉ
The behavior of 5f electrons in soft ligand environments makes actinides, and especially transuranium chalcogenides, an intriguing class of materials for fundamental studies. Due to the affinity of actinides for oxygen, however, it is a challenge to synthesize actinide chalcogenides using non-metallic reagents. Using the boron chalcogen mixture method, we achieved the synthesis of the transuranium sulfide NaCuNpS3 starting from the oxide reagent, NpO2. Via the same synthetic route, the isostructural composition of NaCuUS3 was synthesized and the material contrasted with NaCuNpS3. Single crystals of the U-analogue, NaCuUS3, were found to undergo an unexpected reversible hydration process to form NaCuUS3·xH2O (x ≈ 1.5). A large combination of techniques was used to fully characterize the structure, hydration process, and electronic structures, specifically a combination of single crystal, powder, high temperature powder X-ray diffraction, extended X-ray absorption fine structure, infrared, and inductively coupled plasma spectroscopies, thermogravimetric analysis, and density functional theory calculations. The outcome of these analyses enabled us to determine the composition of NaCuUS3·xH2O and obtain a structural model that demonstrated the retention of the local structure within the [CuUS3]- layers throughout the hydration-dehydration process. Band structure, density of states, and Bader charge calculations for NaCuUS3, NaCuUS3·xH2O, and NaCuNpS3 along with X-ray absorption near edge structure, UV-vis-NIR, and work function measurements on ACuUS3 (A = Na, K, and Rb) and NaCuUS3·xH2O samples were carried out to demonstrate that electronic properties arise from the [CuTS3]- layers and show surprisingly little dependence on the interlayer distance.
RÉSUMÉ
A series of alkali metal rare-earth borates were prepared via high-temperature flux crystal growth, and their structures were characterized by single crystal X-ray diffraction (SXRD). Na3Ln(BO3)2 (Ln = La-Lu) crystallize in the monoclinic space group P21/n, the potassium series K3Ln(BO3)2 (Ln = La-Tb) crystallize in the orthorhombic space group Pnma, while the Ln = Dy, Ho, Tm, Yb analogues crystallize in the orthorhombic space group Pnnm. To demonstrate the generality of this synthetic technique, high-entropy oxide (HEO) compositions K3Nd0.15(1)Eu0.20(1)Gd0.20(1)Dy0.22(1)Ho0.23(1)(BO3)2 and K3Nd0.26(1)Eu0.29(1)Ho0.22(1)Tm0.14(1)Yb0.10(1)(BO3)2 were obtained in single crystal form. Radiation damage investigations determined that these borates have a high radiation damage tolerance. To assess whether trivalent actinide analogues of Na3Ln(BO3)2 and K3Ln(BO3)2 would be stable, density functional theory was used to calculate their enthalpies of formation, which are favorable.
RÉSUMÉ
Single crystals of three new compounds, Na0.36Sr0.82Ge4O9 (1, proposed composition), Na2SrGe6O14 (2), and K2SrGe8O18 (3), were obtained and characterized using single-crystal X-ray diffraction. Their structures contain three-dimensional (3D) anionic frameworks built from GeO4 and GeO6 polyhedra. The presence of octahedral Ge4+ sites makes the new phases suitable for Mn4+ substitution to obtain red-emitting phosphors with a potential application for light conversion. Photoluminescence properties of Mn4+-substituted Na2SrGe6O14 (2) and K2SrGe8O18 (3) samples were studied over a range of temperatures, and red light photoluminescence associated with the electronic transitions of tetravalent manganese was observed. The Na2SrGe6O14 (2) phase was also substituted with Pr3+ on the mixed Na-Sr site similar to the previously studied Na2CaGe6O14:Pr3+. The red emission peak of the Pr3+ activator occurs at a shorter wavelength (610 nm) compared to that of Mn4+ (662-663 nm). Additionally, second harmonic generation (SHG) data were collected for the noncentrosymmetric Na2SrGe6O14 (2) phase, indicating weak SHG activity. Diffuse reflectance spectroscopy and density of states calculations were performed to estimate the band gap values for pristine Na2SrGe6O14 (2) and K2SrGe8O18 (3) phases.
RÉSUMÉ
A series of A2M4U6S17 (A = alkali metal; M = Pd, Pt) compounds, specifically K2Pd4U6S17, K2Pt4U6S17, Rb2Pt4U6S17, and Cs2Pt4U6S17, were synthesized using the combined boron-chalcogen mixture and molten flux crystal growth methods. The formation of rubidium- and cesium-containing analogues resulted from a in situ alkali polysulfide flux formed from alkali carbonates. The successful synthesis of single crystals of the title compounds allowed for their structural characterization by single-crystal X-ray diffraction. The structure determination revealed disorder of the alkali cations in Rb2Pt4U6S17 and Cs2Pt4U6S17, while the potassium cations in K2Pd4U6S17 and K2Pt4U6S17 were fully ordered. Magnetic measurements were performed on samples of K2Pt4U6S17, Rb2Pt4U6S17, and Cs2Pt4U6S17 that contained small amounts of paramagnetic ß-US2 and diamagnetic PtS. Antiferromagnetic order was observed at TN = 9.1 K for K2Pt4U6S17. No long-range magnetic order was observed for Rb2Pt4U6S17 and Cs2Pt4U6S17. Uranium moments of 2.5, 2.6, and 2.6 µB were measured for K2Pt4U6S17, Rb2Pt4U6S17, and Cs2Pt4U6S17, respectively.