Unraveling the neutral and polar lipidome of Nordic brown macroalgae: A sustainable source of functional lipids.

Brown macroalgae represent a sustainable and abundant source of lipids with acknowledged functional and health benefits. Nonetheless, macroalgae lipidome has been poorly unraveled due to lipids complex structural and chemical diversity. In this study, a comprehensive lipidomic analysis was performed in four macroalgae: Saccharina latissima, Fucus vesiculosus, Fucus serratus and the invasive Sargassum muticum, using HILIC-C30RP-HRMS. Neutral lipids (tri-, di-glycerides) comprised 72-82% of total lipids (TL) with a highly unsaturation profile (27-49% depending on species). The polar lipidome comprised glycolipids, phospholipids, betaine lipids and sphingolipids with varied content among macroalgae. S. latissima displayed the greatest level of glycolipids (23% of TL), by contrast with the dominance of long-chain polyunsaturated betaine lipids (10-18% of TL) in the other species, particularly in S. muticum. Phospholipids and sphingolipids were detected in low abundance (<1.7% of TL). This study elevated the potential of brown macroalgae as an emerging reservoir of bioactive lipids with nutritional relevance.

Characterization of Calotropis gigantiea plant leaves biomass-based bioplasticizers for biofilm applications.

The present surge in environmental consciousness has pushed for the use of biodegradable plasticizers, which are sustainable and abundant in plant resources. As a result of their biocompatibility and biodegradability, Calotropis gigantiea leaf plasticizers (CLP) serve as viable alternatives to chemical plasticizers. First time, the natural plasticizers from the Calotropis leaves were extracted for this study using a suitable chemical approach that was also environmentally friendly. The XRD results showed a reduced crystallinity index of 20.2 % and a crystalline size of 5.3 nm, respectively. TGA study revealed that the CLP has good thermal stability (244 °C). Through FT-IR study, the existence of organic compounds in CLP can be investigated by key functional groups such as alcohol, amine, amide, hydrocarbon, alkene, aromatic, etc. Further the presence of alcoholic, amino, and carboxyl constituents was confirmed by UV investigation. SEM, EDAX analysis, and AFM are used to examine the surface morphology of the isolated plasticizer. SEM pictures reveal rough surfaces on the CLP surface pores, which makes them suitable for plasticizing new bioplastics with improved mechanical properties. Poly (butylene adipate-co-terephthalate) (PBAT), a biodegradable polymer matrix, was used to investigate the plasticization impact after the macromolecules were characterised. The biofilm PBAT/CLP had a thickness of 0.8 mm. In addition, the reinforcement interface was examined using scanning electron microscopy. When CLP is loaded differently in PBAT, the tensile strength and young modulus change from 15.30 to 24.60 MPa and from 137 to 168 MPa, respectively. CLP-reinforced films demonstrated better surface compatibility and enhanced flexibility at a loading of 2 % when compared to pure PBAT films. Considering several documented characteristics, CLP may prove to be an excellent plasticizer for resolving environmental issues in the future.

Biomass Valorization through Catalytic Pyrolysis Using Metal-Impregnated Natural Zeolites: From Waste to Resources.

Catalytic biomass pyrolysis is one of the most promising routes for obtaining bio-sustainable products that replace petroleum derivatives. This study evaluates the production of aromatic compounds (benzene, toluene, and xylene (BTX)) from the catalytic pyrolysis of lignocellulosic biomass (Pinus radiata (PR) and Eucalyptus globulus (EG)). Chilean natural zeolite (NZ) was used as a catalyst for pyrolysis reactions, which was modified by double ion exchange (H2NZ) and transition metals impregnation (Cu5H2NZ and Ni5H2NZ). The catalysts were characterized by nitrogen adsorption, X-ray diffraction (XRD), ammonium programmed desorption (TPD-NH3), and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS). Analytical pyrolysis coupled with gas chromatography/mass spectrometry (Py-GC/MS) allowed us to study the influence of natural and modified zeolite catalysts on BTX production. XRD analysis confirmed the presence of metal oxides (CuO and NiO) in the zeolite framework, and SEM-EDS confirmed successful metal impregnation (6.20% for Cu5H2NZ and 6.97% for Ni5H2NZ). Py-GC/MS revealed a reduction in oxygenated compounds such as esters, ketones, and phenols, along with an increase in aromatic compounds in PR from 2.92% w/w (without catalyst) to 20.89% w/w with Ni5H2NZ at a biomass/catalyst ratio of 1/5, and in EG from 2.69% w/w (without catalyst) to 30.53% w/w with Ni5H2NZ at a biomass/catalyst ratio of 1/2.5. These increases can be attributed to acidic sites within the catalyst pores or on their surface, facilitating deoxygenation reactions such as dehydration, decarboxylation, decarbonylation, aldol condensation, and aromatization. Overall, this study demonstrated that the catalytic biomass pyrolysis process using Chilean natural zeolite modified with double ion exchange and impregnated with transition metals (Cu and Ni) could be highly advantageous for achieving significant conversion of oxygenated compounds into hydrocarbons and, consequently, improving the quality of the condensed pyrolysis vapors.

Coconut shell-based biochars produced by an innovative thermochemical process for obtaining improved lignocellulose-based adsorbents.

The urgent need for a simple and cost-effective thermochemical process to produce biochar has prompted this study. The aim was to develop a straightforward thermochemical process under O2-limited conditions for the production of coconut-based biochar (CBB) and to assess its ability to remove methylene blue (MB) through adsorption, comparing it with CBB produced by slow pyrolysis. CBBs were obtained under different atmospheric conditions (O2-limited, muffle furnace biochar (MFB); and inert, pyrolytic reactor biochar (PRB)), at 350, 500, and 700 °C, and for 30 and 90'. MFB and PRB were characterized using FTIR, RAMAN, SEM, EDS, and XRD analyses. Adsorption tests were conducted using 1.0 g L-1 of MFB and PRB, 10 mg L-1 of MB at 25 °C for 48 h. Characterization revealed that atmospheric conditions significantly influenced the yield and structural features of the materials. PRB exhibited higher yields and larger cavities than MFB, but quite similar spectral features. Adsorption tests indicated that MFB and PRB had qt values of 33.1 and 9.2 mg g-1, respectively, which were obtained at 700 °C and 90', and 700 °C and 30', respectively. This alternative method produced an innovative and promising lignocellulose-based material with great potential to be used as a biosorbent.

Energy from waste biomass: an LCA study on a biofuel cell at early design stage.

Diversifying energy sources and managing waste biomass are two pressing contemporary issues. The new technology proposed in this study aims to address both by converting waste biomass into energy and fertilizer through the use of a biofuel cell (BFC). The purpose of this study is to assess the environmental impacts associated with this innovative technology through a Life Cycle Assessment (LCA). To achieve the goal, the production and use of the cell were modelled, considering both laboratory-scale operations and industrial-scale approximations. The study explored alternative scenarios, such as sensitivity analyses involving different acids and bases, renewable energy sources, and heat recovery. Comparisons with conventional biomass waste treatments (anaerobic digestion and composting) demonstrated that the BFC technology remains competitive. To further improve the BFC's environmental footprint, efforts should focus on reducing energy requirements and enhancing nutrient recovery during scale-up. These insights are crucial for advancing sustainable waste treatment technologies and maximizing the potential of discarded biomass in an environmentally friendly manner.

Green low-cost synthesis of zero-valent iron nanoparticles from Palm Petiole Extract for Cr(VI) removal from water.

One of the hottest research topics over the last decades was the valorization or/and recycling of agro-industrial wastes into different valuable liquid or solid products, which is considered a sustainable and low-cost approach. In this study, we developed zero-valent iron nanoparticles from Palm Petiole Extract (P-NZVI) using a green and straightforward approach. The as-synthesized P-NZVI was used to adsorb Cr(VI) in water. The physico-chemical characterizations of P-NZVI, including the particle size, crystalline structure, surface area, morphology, and functional groups, were investigated via several techniques such as UV-vis spectroscopy, SEM, TEM, XRD, FTIR, AFM, DLS, pHZPC measurement, and BET analysis. The adsorption performance of P-NZVI was studied under different operational parameters, including pollutant concentration, pH, temperature, and adsorbent mass. The adsorption rate was found to be 89.3% within 40 min, corresponding to the adsorption capacity of 44.47 mg/g under the following conditions: initial Cr(VI) concentration of 40 mg/L, pH 5, and a P-NZVI dosage of 1 g/L. It was found that the adsorption pattern follows the Langmuir and the pseudo-second-order kinetic models, indicating a combination of monolayer adsorption and chemisorption mechanisms. The thermodynamic study shows that the adsorption process is endothermic and spontaneous. The reusability of P-NZVI was carried out four times, showing a slight decrease from 89.3 to 87%. These findings highlight that P-NZVI's could be an effective green adsorbent for removing Cr(VI) or other types of toxic pollutants from water.

Unraveling the structural aspects of microwave-assisted OrganoCat-based coconut shell lignins: An eco-friendly route for obtaining bio-based antioxidants.

New routes for biomass valorization have been developing by the scientific community. The aim of this work was developing a novel OrganoCat-based protocol and deeply understand the structure of the obtained lignins. Microwave-assisted OrganoCat-based process was performed using a biphasic system (ethyl acetate and oxalic acid or HCl) at mild conditions. OrganoCat-based lignins (OCLs) were characterized by compositional analysis, FTIR, 1H, 13C, 1H13C HSQC, 31P NMR, TGA and GPC. The solubility of OCLs in different organic solvents and their antioxidant capacity against DPPH were investigated. The spectroscopic analyses showed that OCLs have high residual extractives and the lignin motifs were preserved. OCLs have presented lower thermal stability than MWL, but showed great antioxidant activities and high solubility in a wide range of organic solvents. A novel biorefinery protocol yielded coconut shell lignins with peculiar structural and compositional features and several technological applications through an eco-friendly, sustainable and relatively low-cost biphasic pulping process.

State-of-the-art of lignin-derived carbon nanodots: Preparation, properties, and applications.

Lignin-derived carbon nanodots (LCNs) are nanometer-scale carbon spheres fabricated from naturally abundant lignin. Owing to rich and highly heritable graphene like π-π conjugated structure of lignin, to fabricate LCNs from it not only endows LCNs with on-demand tunable size and optical features, but also further broadens the green and chemical engineering of carbon nanodots. Recently, they have become increasingly popular in sensing, bioimaging, catalysis, anti-counterfeiting, energy storage/conversion, and others. Despite the enormous research efforts put into the ongoing development of lignin value-added utilization, few commercial LCNs are available. To have a deeper understanding of this issue, critical impacts on the preparation, properties, and applications of state-of-the-art LCNs are carefully reviewed and discussed. A concise analysis of their unique advantages, limitations for specific applications, and current challenges and outlook is conducted. We hope that this review will stimulate further advances in the functional material-oriented production of lignin.

Progress and Opportunities in Photocatalytic, Electrocatalytic, and Photoelectrocatalytic Production of Hydrogen Peroxide Coupled with Biomass Valorization.

Hydrogen peroxide (H2O2) has been considered an energy carrier (fuel) and oxidizer for various chemical synthesis and environmental remediation processes. Biomass valorization can generate high-value-added products in a green and pollution-free way to solve the energy and environmental crisis. The biomass valorization coupled with H2O2 generation via photo-, electro-, and photoelectrocatalysis plays a positive role in sustainable targets, which can maximize energy utilization and realize the production of value-added products and fuel synthesis. Recently, catalyst design and mechanism studies in H2O2 generation coupled with biomass valorization are in the infancy stage. Herein, this review begins with a background on photo-, electro-, and photoelectrocatalytic techniques for H2O2 generation, biomass valorization, and the H2O2 generation couples with biomass valorization. Meanwhile, the progress and reaction mechanism are reviewed. Finally, the prospects and challenges of a synergistic coupled system of H2O2 synthesis and value-added biomass in achieving high conversion, selectivity, and reaction efficiency are envisioned.

Microcrystalline cellulose from soybean hull as an excipient in solid dosage forms: Preparation, powder characterization, and tableting properties.

Microcrystalline cellulose (MCC) is one of the essential functional excipients in the formulation of tablets. The need for cheaper MCC sources has drawn significant attention to exploring renewable sources. In this study, MCC was produced from soybean hull (SBH), the primary by-product of the soy industry, using a novel, simplified, and cost-effective approach. Various characterization techniques were used to study the physicochemical properties and micromeritics of the SBH-based MCC powders and compare them to those of the commercial Avicel PH-101. SBH MCCs had a larger particle size, a broader particle size distribution, a higher degree of polymerization, a higher degree of crystallinity, better thermal stability, and slightly superior flowability and compressibility than Avicel PH-101. The tableting blends (containing 60 % MCC) were prepared, and the post-compression out-of-die Heckel analysis showed that formulations with aggregated SBH MCCs were less ductile than those made with Avicel PH-101, resulting in a lower porosity (better compressibility) of the latter at higher compression pressures. The hardness values for all formulations were above 6 kg, with higher values for those made with Avicel PH-101. The lubricant sensitivity was lower for SBH MCCs. All tablets made using developed formulations showed very low friability (<0.1 %) and short disintegration times (<90 s), making them well-suited candidates for manufacturing orally disintegrating tablets (ODTs).

Aerobic Oxidative Synthesis of Formamides from Amines and Bioderived Formyl Surrogates.

Herein we present a new strategy for the oxidative synthesis of formamides from various types of amines and bioderived formyl sources (DHA, GLA and GLCA) and molecular oxygen (O2) as oxidant on g-C3N4 supported Cu catalysts. Combined characterization data from EPR, XAFS, XRD and XPS revealed the formation of single CuN4 sites on supported Cuphen/C3N4 catalysts. EPR spin trapping experiments disclosed ⋅OOH radicals as reactive oxygen species and ⋅NR1R2 radicals being responsible for the initial C-C bond cleavage. Control experiments and DFT calculations showed that the successive C-C bond cleavage in DHA proceeds via a reaction mechanism co-mediated by ⋅NR1R2 and ⋅OOH radicals based on the well-equilibrated CuII and CuI cycle. Our catalyst has much higher activity (TOF) than those based on noble metals.

A Network of Processes for Biorefining Burdock Seeds and Roots.

In this work, a novel sustainable approach was proposed for the integral valorisation of Arctium lappa (burdock) seeds and roots. Firstly, a preliminary recovery of bioactive compounds, including unsaturated fatty acids, was performed. Then, simple sugars (i.e., fructose and sucrose) and phenolic compounds were extracted by using compressed fluids (supercritical CO2 and propane). Consequently, a complete characterisation of raw biomass and extraction residues was carried out to determine the starting chemical composition in terms of residual lipids, proteins, hemicellulose, cellulose, lignin, and ash content. Subsequently, three alternative ways to utilise extraction residues were proposed and successfully tested: (i) enzymatic hydrolysis operated by Cellulases (Thricoderma resei) of raw and residual biomass to glucose, (ii) direct ethanolysis to produce ethyl levulinate; and (iii) pyrolysis to obtain biochar to be used as supports for the synthesis of sulfonated magnetic iron-carbon catalysts (Fe-SMCC) to be applied in the dehydration of fructose for the synthesis of 5-hydroxymethylfurfural (5-HMF). The development of these advanced approaches enabled the full utilisation of this resource through the production of fine chemicals and value-added compounds in line with the principles of the circular economy.

Selective (sono)photocatalytic cleavage of lignin-inspired ß-O-4 linkages to phenolics by ultrasound derived 1-D titania nanomaterials.

Catalytic conversion of lignin to value-added aromatic compounds is still an open challenge, since the selective cleavage of the linkages interconnecting the aromatic molecules, especially the ß-O-4 ones, is not efficiently achieved yet. Herein, novel titania-based nanostructured materials were synthesized using low-power-low-frequency ultrasound that demonstrated high efficiency for the selective cleavage of Cα-Cß bond of ß-O-4 linkages of lignin-inspired model compounds. Going a step ahead, experiments of sonophotocatalytic valorization of 2-phenoxy-1-phenylethanol were contacted for the first time, where the exposure to ultrasound leading to better conversion and selectivity towards the desired products in the case of the novel ultrasound-synthesized nano-photocatalyst. Mechanistic insights showcased that photogenerated holes are the main active species in the catalytic process. In general, this research work provides a green, effective, and cost-effective approach for the selective and efficient catalytic lignin valorization.

Harnessing recalcitrant lignocellulosic biomass for enhanced biohydrogen production: Recent advances, challenges, and future perspective.

Biohydrogen (Bio-H2) is widely recognized as a sustainable and environmentally friendly energy source, devoid of any detrimental impact on the environment. Lignocellulosic biomass (LB) is a readily accessible and plentiful source material that can be effectively employed as a cost-effective and sustainable substrate for Bio-H2 production. Despite the numerous challenges, the ongoing progress in LB pretreatment technology, microbial fermentation, and the integration of molecular biology techniques have the potential to enhance Bio-H2 productivity and yield. Consequently, this technology exhibits efficiency and the capacity to meet the future energy demands associated with the valorization of recalcitrant biomass. To date, several pretreatment approaches have been investigated in order to improve the digestibility of feedstock. Nevertheless, there has been a lack of comprehensive systematic studies examining the effectiveness of pretreatment methods in enhancing Bio-H2 production through dark fermentation. Additionally, there is a dearth of economic feasibility evaluations pertaining to this area of research. Thus, this review has conducted comparative studies on the technological and economic viability of current pretreatment methods. It has also examined the potential of these pretreatments in terms of carbon neutrality and circular economy principles. This review paves the way for a new opportunity to enhance Bio-H2 production with technological approaches.

Selective Stereoretention of Carbohydrates upon C-C Cleavage Enabling D-Glyceric Acid Production with High Optical Purity over a Ag/γ-Al2O3 Catalyst.

Chiral carboxylic acid production from renewable biomass by chemocatalysis is vitally important for reducing our carbon footprint, but remains underdeveloped. We herein establish a strategy that make use of a stereogenic center of biomass to achieve a rare example of D-glyceric acid production with the highest yield (86.8 %) reported to date as well as an excellent ee value (>99 %). Unlike traditional asymmetric catalysis, chiral catalysts/additives are not required. Ample experiments combined with quantum chemical calculations established the origins of the stereogenic center and catalyst performance. The chirality at C4 in D-xylose was proved to be retained and successfully delivered to C2 in D-glyceric acid during C-C cleavage. The remarkable cooperative-roles of Ag+ and Ag0 in the constructed Ag/γ-Al2O3 catalyst are disclosed as the crucial contributors. Ag+ was responsible for low-temperature activation of D-xylose, while Ag0 facilitated the generation of active O* from O2. Ag+ and active O* cooperatively promoted the precise cleavage of the C2-C3 bond, and more importantly O* allowed the immediate fast oxidization of the D-glyceraldehyde intermediate to stabilize D-glyceric acid, thereby inhibiting the side reaction that induced racemization. This strategy makes a significant breakthrough in overcoming the limitation of poor enantioselectivity in current chemocatalytic conversion of biomass.

Fractionation of oil palm fronds using ethanol-assisted deep eutectic solvent: Influence of ethanol concentration on enhancing enzymatic saccharification and lignin ß-O-4 content.

Numerous fractionation methods have been developed in recent years for separating components such as cellulose, hemicellulose, and lignin from lignocellulosic biomass wastes. Deep eutectic solvents (DES) have recently been widely investigated as captivating green solvents for biomass fractionation. However, most acidic-based deep eutectic solvent fractionation produces condensed lignin with low ß-O-4 content. Besides, most DESs exhibit high viscosity, which results in poor mass transfer properties. This study aimed to address the challenges above by incorporating ethanol into the deep eutectic solvent at various concentrations (10-50 wt%) to fractionate oil palm fronds at a mild condition, i.e., 80 °C, 1 atm. Cellulose residues fractionated with ethanol-assisted deep eutectic solvent showed a maximum glucose yield of 85.8% when 20 wt% of ethanol was incorporated in the deep eutectic solvent, significantly higher than that achieved by pure DES (44.8%). Lignin extracted with ethanol-assisted deep eutectic solvent is lighter in color and higher in ß-O-4 contents (up to 44 ß-O-4 per 100 aromatic units) than pure DES-extracted lignin. Overall, this study has demonstrated that incorporating ethanol into deep eutectic solvents could enhance the applicability of deep eutectic solvents in the complete valorization of lignocellulosic biomass. Highly enzymatic digestible cellulose-rich solid and ß-O-4-rich lignin attained from the fractionation could serve as sustainable precursors for the production of biofuels.

Reduction of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)Furan at High Current Density using a Ga-Doped AgCu:Cationomer Hybrid Electrocatalyst.

Hydrogenation of biomass-derived chemicals is of interest for the production of biofuels and valorized chemicals. Thermochemical processes for biomass reduction typically employ hydrogen as the reductant at elevated temperatures and pressures. Here, the authors investigate the direct electrified reduction of 5-hydroxymethylfurfural (HMF) to a precursor to bio-polymers, 2,5-bis(hydroxymethyl)furan (BHMF). Noting a limited current density in prior reports of this transformation, a hybrid catalyst consisting of ternary metal nanodendrites mixed with a cationic ionomer, the latter purposed to increase local pH and facilitate surface proton diffusion, is investigated. This approach, when implemented using Ga-doped Ag-Cu electrocatalysts designed for p-d orbital hybridization, steered selectivity to BHMF, achieving a faradaic efficiency (FE) of 58% at 100 mA cm-2 and a production rate of 1 mmol cm-2 h-1, the latter a doubling in rate compared to the best prior reports.

Life cycle assessment for evaluation of novel solvents and technologies: A case study of flavonoids extraction from Ginkgo biloba leaves.

Innovative solvents such as deep eutectic solvents (DESs) and process intensification technologies assisted by ultrasound have been demonstrated to be promising pathways for enhancing solid-liquid extraction. Nevertheless, quantitative and systematic knowledge of their environmental impact is still limited. In this work, a case study of flavonoids extraction from Ginkgo biloba leaves was evaluated by using life cycle assessment (LCA) for comparison of three extraction scenarios. The first used DES as extractant (DESE), and the other two adopted ethanol, including heat reflux extraction (HRE), and ultrasound-assisted extraction (UAE). Among eight key midpoints investigated, all these from UAE were 10.0 %-80.0 % lower than from DESE and HRE except water consumption. The UAE was the eco-friendliest option due to its higher extraction yield, shorter duration and lower solvent consumption. The DESE exhibited the lowest water consumption, the highest freshwater ecotoxicity and human carcinogenic toxicity, while HRE had the highest impacts for the other 6 midpoints. Moreover, solvent production was the key contributor for all the categories. The standardized sensitivity analysis showed that the overall environmental footprint can be further decreased by 15.4 % for DESE pathways via substituting choline chloride/glycerine with choline chloride/ethylene glycol. Furthermore, all pathways using DESs had higher standardized impacts than those employing ethanol from sugarcane or wood. Replacing ethanol from maize with other feedstocks can significantly lessen the overall impacts, among which the UAE using ethanol from sugarcane demonstrated the least environmental impacts. The promotion of DESs as "green and sustainable" alternative to traditional solvents requires careful consideration.

Chloromethylation of Lignin as a Route to Functional Material with Catalytic Properties in Cross-Coupling and Click Reactions.

We present a novel, greener chloromethylation procedure for organosolv aspen lignin under mild reaction conditions without Lewis acid as a catalyst and in acetic acid as a solvent. This synthetic protocol provides a reliable approach to chloromethylated lignin (CML) and means to obtain valuable lignin derivatives. The resulted CML was subsequently transformed into 1-methylimidazolium lignin (ImL), which effectively serves as a stabilizing agent for Pd/CuO nanoparticles (Pd/CuO-NPs). To evaluate the versatility of developed lignin-based catalyst, we investigate its performance in a series of carbon-carbon bond formation reactions, including Suzuki-Miyaura, Sonogashira, Heck reactions, and azide-alkyne cycloaddition (click) reaction. Remarkably, this catalyst exhibited a high degree of catalytic efficiency, resulting in reactions with yields ranging from average to excellent. The heterogeneous catalyst demonstrated outstanding recyclability, enabling its reuse for at least 10 consecutive reaction cycles, with yields consistently falling within the range of 42 % to 84 %. A continuous flow reactor cartridge prototype employing Lignin@Pd/CuO-NPs was developed, yielding results comparable to those achieved in batch reactions. The utilization of Lignin@Pd/CuO-NPs as a catalyst showcases its potential to facilitate diverse carbon-carbon bond formation reactions and underscores its promising recyclability, aligning with the green chemistry metrics and principles of sustainability in chemical processes.

High-Surface Area Mesoporous Sc2O3 with Abundant Oxygen Vacancies as New and Advanced Electrocatalyst for Electrochemical Biomass Valorization.

Scandium oxide (Sc2O3) is considered as omnipotent "Industrial Ajinomoto" and holds promise in catalytic applications. However, rarely little attention is paid to its electrochemistry. Here, the first nanocasting design of high-surface area Sc2O3 with abundant oxygen vacancies (mesoporous VO-Sc2O3) for efficient electrochemical biomass valorization is reported. In the case of the electro-oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), quantitative HMF conversion, high yield, and high faradic efficiency of FDCA via the hydroxymethylfurancarboxylic acid pathway are achieved by this advanced electrocatalyst. The beneficial effect of the VO on the electrocatalytic performance of the mesoporous VO-Sc2O3 is revealed by the enhanced adsorption of reactants and the reduced energy barrier in the electrochemical process. The concerted design, in situ and ex situ experimental studies and theoretical calculations shown in this work should shed light on the rational elaboration of advanced electrocatalysts, and contribute to the establishment of a circular carbon economy since the bio-plastic monomer and green hydrogen are efficiently synthesized.