Assessing the physico-mechanical, anti-bacterial, and anti-demineralization properties of orthodontic resin composite containing different concentrations of photoactivated zinc oxide nanoparticles on Streptococcus mutans biofilm around ceramic and metal orthodontic brackets: An ex vivo study.

BACKGROUND AND PURPOSE: The aim of this study was to evaluate the physico-mechanical, anti-bacterial, and anti-demineralization properties of orthodontic resin composite containing photoactivated zinc oxide nanoparticles (ZnONPs) on Streptococcus mutans biofilm around ceramic and metal brackets. MATERIAL AND METHODS: Following the minimum inhibitory concentration (MIC) determination for ZnONPs, shear bond strength (SBS) was tested for composites containing different concentrations of ZnONPs. The chosen concentration was used to evaluate the microleakage, anti-bacterial, and anti-demineralization properties. RESULTS: Adding 50µg/mL of ZnONPs to the orthodontic composite did not negatively affect its physico-mechanical properties. ZnONPs (50µg/mL)-mediated aPDT and 0.2% chlorhexidine significantly (P=0.000) reduced S. mutans biofilms compared to the phosphate-buffered saline (PBS) groups (metal/PBS=7.47±0.7×106, and ceramic/PBS=7.47±0.7×106), with the lowest colony count observed in these groups (metal/chlorhexidine=1.06±0.4×105, ceramic/chlorhexidine=1±0.2×105, metal/ZnONPs-mediated aPDT=1.33±0.3×105, and ceramic/ZnONPs-mediated aPDT=1.2±0.3×105). Sodium fluoride varnish and ZnONPs-mediated aPDT showed the highest efficacy in anti-demineralization and significantly improving the enamel surface microhardness compared to the artificial saliva, especially in ceramic bracket groups (524.17±42.78N and 441.00±29.48N, 394.17±46.83N, P=0.000, and P=0.003, respectively). CONCLUSION: ZnONPs (50µg/mL)-mediated aPDT effectively inhibited S. mutans biofilm and promoted anti-demineralization without adverse effects on the physico-mechanical properties of the composite resin. These results suggest the potential of this method in preventing white spot lesions during orthodontic treatment.

3D-printed zirconia orthodontic brackets: Effect of printing method on dimensional accuracy.

OBJECTIVES: This study investigated the effect of additive manufacturing (AM) methods on the slot height dimensions and accuracy of 3D-printed orthodontic brackets. METHODS: A 3D model of a standard Mclaughlin Bennett Trevisi bracket was used as a reference to print the ceramic bracket in a 90° orientation using two representative AM methods: digital light processing (DLP) and material jetting (MJ). The dimensional accuracy and slot heights were determined using a scanning electron microscope and an optical scanner. Also, all specimens were analysed using the Geomagic Control X 3D inspection software. The root mean square (RMS) values were used for trueness and precision assessment. Statistical analyses were performed using an independent sample t-test. RESULTS: Slot height dimensions, trueness RMS, and precision RMS were statistically affected by different AM methods (p < .01). There was a significant difference between the different printing methods, with DLP meeting the tolerance requirements (mean slot height = 0.557 ± 0.018 mm) and MJ being slightly below them (mean slot height = 0.544 ± 0.021 mm). However, MJ significantly outperformed DLP in terms of accuracy. Among the two printing methods, MJ was associated with higher trueness (RMS = 0.025 ± 0.004 mm) and precision (RMS = 0.038 ± 0.005 mm). CONCLUSIONS: Both tested AM methods yielded clinically acceptable outcomes, with the RMS range set to ±100 µm and the slot height tolerance established at 0.549-0.569 mm. The MJ technology achieved the highest accuracy.

Entropy-Based Strategies for Multi-Bracket Pools.

Much work in the parimutuel betting literature has discussed estimating event outcome probabilities or developing optimal wagering strategies, particularly for horse race betting. Some betting pools, however, involve betting not just on a single event, but on a tuple of events. For example, pick six betting in horse racing, March Madness bracket challenges, and predicting a randomly drawn bitstring each involve making a series of individual forecasts. Although traditional optimal wagering strategies work well when the size of the tuple is very small (e.g., betting on the winner of a horse race), they are intractable for more general betting pools in higher dimensions (e.g., March Madness bracket challenges). Hence we pose the multi-brackets problem: supposing we wish to predict a tuple of events and that we know the true probabilities of each potential outcome of each event, what is the best way to tractably generate a set of n predicted tuples? The most general version of this problem is extremely difficult, so we begin with a simpler setting. In particular, we generate n independent predicted tuples according to a distribution having optimal entropy. This entropy-based approach is tractable, scalable, and performs well.

Promoting public engagement in interdisciplinary biological systems education by leveraging American sports-inspired bracket contests on social media and web.

The complexity of modern biology poses challenges in fostering interdisciplinary understanding, particularly between practicing scientists and the public. Furthermore, scientists often lack formal training in science communication, despite various motivations to engage the public. The science literacy of the public in the biological sciences can also vary across socio-economic and cultural backgrounds. Leveraging popular culture and informal learning practices to promote active learning offers promising avenues to enhance public understanding of biological systems. Organized sports hold collective recognition across various communities and cultures, serving as a means to bring people together. Notably, the NCAA March Madness event holds widespread national and international popularity, presenting an opportunity to laterally apply this concept to promote science communication within STEM and biology education. An educational social media and web-based contest tool was developed integrating NCAA-inspired brackets with animal biological systems concepts. The tool featured tournament-style matchups based on animal biological systems, interesting animal facts, and a voting system, all housed within a user-friendly interface. To encourage regular user access to the tool, graphic designs were developed for all social media posts to aid in visual recruitment to the voting website. Based on online metrics, the use of social media garnered repeat users across both the public and educators. The latter noted the tool's simplicity and informative content. Application of this social media and web-based bracket contest tool, which leverages informal settings for active learning for use in biology education, can foster science communication to engage audiences, improve comprehension, and promote interdisciplinary biology education.

Virtual bracket removal: a comparative assessment of different software packages.

BACKGROUND: High precision intra-oral scans, coupled with advanced software, enable virtual bracket removal (VBR) from digital models. VBR allows the delivery of retainers and clear aligners promptly following debonding, thus reducing the patients' appointments and minimizing the likelihood of tooth movement. The objective of this study was to compare the enamel surface before bonding and after VBR using three different Computer-aided design (CAD) software and to compare their accuracy. METHODS: Maxillary scans of 20 participants starting orthodontic treatment were selected for inclusion in the study, who exhibited mild to moderate crowding and required bonding of brackets on the labial surface of permanent maxillary teeth (from the maxillary left first molar to the maxillary right first molar). Two intra-oral scans were conducted on the same day, before bonding and immediately after bonding using CEREC Omnicam (Sirona Dental Systems, Bensheim, Germany). The virtual removal of the brackets from the post-bonding models was performed using OrthoAnalyzer (3Shape, Copenhagen, Denmark), Meshmixer (Autodesk, San Rafael, Calif, USA), and EasyRx (LLC, Atlanta, GA, USA) software. The models that underwent VBR were superimposed on the pre-bonding models by Medit Link App (Medit, Seoul, South Korea) using surface-based registration. The changes in the enamel surface following VBR using the three software packages were quantified using the Medit Link App. RESULTS: There was a significant difference among the 3Shape, Meshmixer, and EasyRx software in tooth surface change following VBR. Specifically, EasyRx exhibited lower levels of accuracy compared to the other two VBR software programs (p<.001, p<.001). A significant difference in enamel surface change was observed between tooth segments across all software groups, in both incisors and molars, with VBR of the molars exhibiting the lowest level of accuracy (3Shape p=.002, Meshmixer p<.001, EasyRx p<.001). Regarding the direction of tooth surface changes following VBR, it was observed that all three groups exhibited a significant increase in the percentage of inadequate bracket removal across all teeth segments. CONCLUSIONS: 3Shape and Meshmixer manual VBR software were found to be more accurate than EasyRx automated software, however, the differences were minimal and clinically insignificant.

Comparative in-vivo bond failure rate of orthodontic brackets when bracket base is treated with micro-abrasive blasting vs. acid etching: eighteen month randomized control trial and scanning electron microscope study.

Background: The aim of this study was threefold. Firstly, it aimed to introduce and detail a novel method for chemically etching the bases of stainless-steel orthodontic brackets. Secondly, the study sought to investigate the structural alterations within the brackets' microstructure following chemical etching compared to those with sandblasted bases, using electron microscopy analysis. Lastly, the study aimed to evaluate and compare the long-term durability and survivability of orthodontic brackets with chemically etched bases versus those with sandblasted bases, both bonded using the conventional acid etch technique with Transbond XT adhesive, over an 18-month follow-up period. Methods: The study was a randomized clinical control trial with triple blinding and split-mouth study design and consisted of two groups. The brackets in the sandblasted group were prepared by sandblasting the intaglio surface of the base of the bracket with 50 µm SiO2 particles. Hydrofluoric acid was used to roughen the base in the acid-etched group. The bases of the brackets were viewed under an electron microscope to analyze the topographical changes. Results: A total of 5,803 brackets (3,006 acid-etch, 2,797 sandblasted) in 310 patients were bonded, in a split-mouth design by the same operator. The patients were followed for 18 months. The failure rate of 2.59% and 2.7% was noted in an acid-etched and sandblasted group, respectively. There was a close approximation of curves in the Kaplan-Meier plot, and the survival distribution of the two groups in the log-rank (Mantel-Cox) test was insignificant; x2 = 0.062 (P value = 0.804). Conclusion: Acid etching if the bases of the brackets can be used as an alternative to sandblasting furthermore acid etching can be performed on the chair side.

Appendicular myology of Skorpiovenator bustingorryi: A first attempt to reconstruct pelvic and hindlimb musculature in an abelisaurid theropod.

We present the pelvic and hindlimb musculature of the abelisaurid Skorpiovenator bustingorryi, constituting the most comprehensive muscle reconstruction to date in ceratosaur theropods. Using extant phylogenetic bracket method, we reconstructed 39 muscles that can commonly found in extant archosaurs. Through the identification of bone correlates, we recognized thigh and hindlimb muscles including knee extensors, m. iliofibularis, m. flexor tibialis externus, mm. caudofemorales, mm. puboischiofemorales, and crus muscles important in foot extension and flexion (e.g., m. tibialis anterior, mm. gastrocnemii). Also, autopodial intrinsic muscles were reconstructed whose function involve extension (m. extensor digiti 2-4), flexion (mm. flexor digitorum brevis superficialis), interdigital adduction (m. interosseus dorsalis) and abduction (m. interosseous plantaris, m. abductor 4). Abelisaurids like Skorpiovenator show a deep pre- and postacetabular blade of the ilia and enlarged cnemial crests, which would have helped increasing the moment arm of muscles related to hip flexion and hindlimb extension. Also, pedal muscles related to pronation were probably present but reduced (e.g., m. pronator profundus). Despite some gross differences in the autopodial morphology in extant outgroups (e.g., crocodilian metatarsus and avian tarsometatarsus), the present study allows us to hypothesize several pedal muscles in Skorpiovenator. These muscles would not be arranged in tendinous bundles as in Neornithes, but rather the condition would be similar to that of crocodilians with several layers formed by fleshy bellies on the plantar and dorsal aspects of the metatarsus. The musculature of Skorpiovenator is key for future studies concerning abelisaurid biomechanics, including the integration of functional morphology and ichnological data.

Assessment of the Additive Effect of Remineralizing Agents in Combination With Fluoride Releasing Adhesives in the Prevention of Enamel Decalcification in Orthodontic Patients: An In Vitro Study.

Introduction Incorporation of remineralizing agents with fluoride-releasing bracket adhesives may prevent the development of white spot lesions (WSL) or reverse the established WSL in patients undergoing fixed orthodontic treatment. We aimed to find out how effectively casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride varnish (FV) can remineralize teeth when mixed with fluoride-releasing orthodontic adhesive. Materials and methods We randomly assigned a total of 60 premolar teeth, therapeutically extracted for orthodontic purposes, into two equal groups. Group I (n = 30) utilized fluoride-releasing adhesive (FR), and Group II (n = 30) bonded with non-fluoride adhesive (NFR). Based on the applied remineralizing agent, we further divided each of the two groups into three equal subgroups of 10: Group IA (FR+FV), Group IB (FR+CPP-ACP), Group IC (control-only FR), Group IIA (NFR+FV), Group IIB (NFR+CPP-ACP), and Group IIC (control-only NFR). Following bonding procedures, all the samples underwent pH cycling for 28 days, where the enamel samples were immersed in 20 ml of demineralizing solution for three hours, followed by immersion in 30 ml of remineralizing solution for 17 hours. The samples were analyzed for shear bond strength (SBS) on a universal testing machine and hardness values (HV) by the Vickers microhardness test (VMT) using the indentation method. We also evaluated the adhesive remnant index (ARI) scores to determine the site of bracket failure. Statistical analysis The shear bond strength (SBS) and hardness value (HV) were expressed as the mean, standard deviation (SD), and median for each subgroup. We used the non-parametric Kruskal-Wallis test to analyze the SBS and HV, followed by the Dunn-Bonferroni test for intra-pair differences. The ARI score was expressed as the frequency of the percentage distribution, and the difference in the distribution of ARI scores between the groups was assessed by the Cochran chi-square test. The probability (p) value equal to or less than 0.05 was considered statistically significant. Results The results show that Group IB, bonded with a fluoride-releasing adhesive and a CPP-ACP remineralizing agent surface treatment, has the highest HV of 300.23 units. Group IIC (only NFR) has the lowest hardness of 153.3 units, which is statistically significant (p < 0.001). However, the ARI scores are not statistically significant between the groups tested. Conclusion The bond strength of the adhesive and the surface hardness of the enamel increased with the addition of fluoride varnish and CPP-ACP to both the fluoride-releasing and non-fluoride-releasing adhesives.

Efficacy of Lasers in Debonding Ceramic Brackets: Exploring the Rationale and Methods.

The development of ceramic brackets in orthodontics three decades ago emerged as a response to the increasing patient demand for less visible orthodontic appliances. While these brackets provide superior aesthetics, they are characterized by lower fracture toughness and higher bond strength in contrast to metal brackets. These properties present challenges during the debonding step, including the risk of enamel micro-fractures and cracks. Historically, various strategies have been developed to address challenges associated with debonding, reduce patient discomfort, and ensure that the bond failure site is confined to the bracket-adhesive interface. This included the use of specially designed debonding pliers, electrothermal debonding, ultrasonic technique, and chemical agents. Recently, there has been a shift towards utilizing different types of laser irradiation for this purpose. The burgeoning strategy, however, requires diligent scientific scrutiny to establish a standardized protocol with particular laser parameters and ultimately achieve the goal of enhancing the patient experience by reducing discomfort. This article offers a narrative review of laser-aided debonding of ceramic brackets, aimed at comparing different laser types, presenting their benefits and downsides, validating the efficiency of each method, and summarizing the published literature on this subject. It also provides insights for orthodontists on reducing patient discomfort that usually accompanies debonding ceramic brackets by delving into the science behind the use of lasers for this purpose.

Synthesis and evaluation of fluorescent resins with europium-ß-diketonate complex for orthodontic use.

No effective technique exists for removing adhesive remnants following bracket debonding. We propose that fluorescence imaging using europium ions (Eu3+) offers an effective solution for minimizing iatrogenic enamel damage. This study aimed to assess the impact of different mixing ratios of monomer mixtures on the photoluminescence and flexural properties of a newly developed fluorescent adhesive. Four monomer blends with varying urethane dimethacrylate (UDMA) to triethylene glycol dimethacrylate (TEGDMA) ratios were prepared and polymerized. The blends contained 0.1 wt% of tris(1,3-diphenyl-1,3-propanedionato)(1,10-phenanthroline) Eu(III), [Eu(DBM)3Phen], as the phosphor. Optical measurements and flexural tests were conducted for each resin specimen. The emission spectra exhibited narrow bands corresponding to the 4f-4f transitions of the Eu3+ ions. The photoluminescence properties remained unaffected by the mixing ratio, whereas the mechanical properties tended to improve with higher UDMA content. We conclude that the Eu(DBM)3Phen-containing resin shows promise as a fluorescent orthodontic adhesive that contributes to preserving enamel health.

Optimization design of battery bracket for new energy vehicles based on 3D printing technology.

Nowadays, what captures consumers' primary attention is how to purchase electric vehicles with long range and desirable price. Lightweight construction stands as one of the most effective approaches for prolonging range and lowering costs. As a consequence, it is particularly imperative to undertake lightweight design optimization for the battery bracket of new energy vehicles by applying 3D printing technology. To actualize this goal, Rhino software was initially employed for 3D modeling to design the battery bracket system for a pure electric vehicle in China. Subsequently, topology optimization design of the battery bracket was carried out by adopting Altair Inspire software. Last but not least, manufacturing and assembly inspection were completed using a 3D printer. The results show that the maximum displacement of the battery lower tray bracket after topology optimization is 3.20 mm, which is slightly higher than before, but still relatively small. The maximum Mises equivalent stress rose to 240.7 MPa post-optimization, but brought about a uniform stress distribution at the bottom of the bracket. In comparison, the minimum factor of safety met design requirements at 1. The mass was lessened to 0.348 kg, representing a 49.2% decrease in comparison with pre-optimization levels. The 3D-printed bracket was fabricated by employing a 3D printer, thereby achieving the aforementioned mass abatement. The battery pack parts exhibited a bright surface with low roughness and no discernible warping or deformation defects. As revealed by the assembly results, the components of the battery pack bracket are tightly coordinated with each other, with no evident assembly conflicts, revealing that the dimensional accuracy and fit of the completed parts meet production requirements. These findings lay solid groundwork for the mass production of high-performance battery pack brackets.

3D-printed indirect bonding trays and transfer jigs for lingual brackets: Digital workflows and two case reports.

With the advancement of 3-dimensionally (3D) printing technology, orthodontists can design and fabricate 3D-printed indirect bonding trays and transfer jigs for lingual brackets independently from the laboratory. The present article describes, in detail, the digital workflows for designing and fabricating 3D-printed lingual bracket indirect bonding trays and transfer jigs. Additionally, it aims to demonstrate the effectiveness of this approach in managing common orthodontic issues in adult patients. The first case report exemplifies the successful management of moderate crowding in a Class I adult patient using a non-extraction approach with lingual brackets and flexible 3D-printed indirect bonding trays. The second case illustrates the application of lingual brackets and rigid 3D-printed indirect bonding trays in managing a skeletal Class II adult patient with mouth protrusion requiring four-bicuspid extractions. The achieved good treatment results might demonstrate the high transfer accuracy of 3D-printed lingual bracket indirect bonding trays. Additional studies with large sample sizes should be conducted to compare the effectiveness and efficiency of 3D-printed trays with other tray types.

The effect of orthodontic bracket base shape on shear bond strength to human enamel, an in vitro study.

The purpose of this study was to evaluate the in vitro effect of orthodontic bracket base shape on shear bond strength (SBS) to human enamel and assess the nature of debonding fractures using the Adhesive Remnant Index (ARI). Orthodontic brackets with different-shaped bases (flower, heart, rectangle) were bonded to 120 extracted human third molars. Shear bond strength was measured using a Servohydraulic Test System at 24 h and 2 months after bonding. Adhesive Remnant Index scores were evaluated under 10x magnification to assess the amount of resin left on the tooth. The control bracket (rectangular base shape) had the highest mean SBS (26.8 ± 8.2 megapascals [MPa]), and significantly differed from the flower (17.2 ± 4.4 MPa) and heart (18.9 ± 3.5 MPa) base shapes (p < 0.001). The mean SBS between debonding times at 24 h (21.5 ± 7.4 MPa) and 2 months (20.4 ± 6.7 MPa) were not statistically significant (p > 0.05). Analysis of ARI scores showed a significant difference between flower-24 h versus heart-2 months (p = 0.039), flower-24 h versus heart-24 h (p = 0.004), and control-2 months versus heart-24 h (p = 0.015). Bracket base shape influenced SBS, with the rectangular base shape having a higher mean SBS compared to flower and heart base shapes. Variations in ARI scores occurred based on bracket shape and were of a mixed adhesive-cohesive nature. All bracket shapes had bond strengths above the clinically acceptable range of 6-8 MPa, and may thus provide adequate SBS in a clinical situation.

Hipoclorito de Sodio como Agente Desproteinizante para Mejorar la Adhesión en Esmalte Hipomineralizado en Ortodoncia. Una Revisión Narrativa

Obtener una buena adhesión entre esmalte y bracket es un aspecto fundamental para el éxito del tratamiento en Ortodoncia. Algunos casos presentan desafíos en esta adhesión, especialmente cuando nos enfrentamos ante un esmalte con alteraciones como hipomineralizaciones, hipoplasias o fluorosis dental. Para sobreponer esta dificultad en la unión adhesiva se han propuesto diversas estrategias terapéuticas como es el uso de agentes desproteinizantes. El objetivo de esta revisión narrativa es describir el uso de hipoclorito de sodio como agente desproteinizante en dientes con alteraciones de esmalte para mejorar la adhesión en Ortodoncia. Se realizó una búsqueda bibliográfica en PubMed de los últimos 5 años. Se encontraron 116 artículos, de los cuales 23 cumplieron con los criterios requeridos y fueron seleccionados para la revisión. La desproteinización del esmalte con hipoclorito de sodio como paso previo al grabado ácido, es una estrategia útil en el proceso de cementación de aparatología de ortodoncia fija en dientes con alteraciones del esmalte. El uso de hipoclorito de sodio al 5,25 % es una alternativa de bajo co sto, no invasiva y eficiente para mejorar la fuerza de adhesión en pacientes con alteraciones del esmalte.

Obtaining good adhesion between enamel and bracket is a fundamental aspect for success in Orthodontics. Some cases present challenges in this adhesion, especially when we are faced with enamel with alterations such as hypomineralization, hypoplasia or dental fluorosis. To overcome this difficulty in adhesive bonding, various therapeutic strategies have been proposed, such as the use of deproteinizing agents. The objective of this study is to describe the use of sodium hypochlorite as a deproteinizing agent in teeth with enamel alterations to improve adhesion in Orthodontics. A bibliographic search was carried out in PubMed for articles within the last 5 years. In this study 116 articles were found, of which 23 met the required criteria and were selected for the review. Deproteinization of the enamel with sodium hypochlorite as a prior step to acid etching is an important stage in the cementation process of fixed appliances in orthodontics. The use of 5.25% sodium hypochlorite is a low-cost, non-invasive and efficient alternative to improve adhesion strength in patients with anomalies of tooth enamel.

Comparison of the accuracy of bracket axial positioning with and without radiographic support and according to practitioner experience: A three-dimensional study.

INTRODUCTION: Accurate bracket positioning remains challenging. To avoid angulation errors, some recommend examining the panoramic radiograph during bonding. However, it can cause distortions. Cone-beam computed tomography (CBCT) provides a more precise panoramic reconstruction but with higher radiation doses. The main objective of this study is to compare the accuracy of axial positioning between direct bonding without radiography, with conventional panoramic radiograph, and with panoramic reconstruction from CBCT. The secondary objectives are to evaluate positioning accuracy of each tooth and to assess the influence of practitioner level of experience. METHODS: Thirty practitioners, divided into two groups based on their experience performed direct bonding on a model thrice: without radiography, then with the conventional panoramic radiograph, then with the panoramic reconstruction from CBCT. Models were scanned, and angulation errors were measured using OrthoAnalyzer. Values were compared using the Friedman's test followed by the Bonferroni correction for multiple comparisons (P-value = 0.05). RESULTS: For the low level of experience group, angulation errors were significantly greater than the accepted limit without radiographic reference, and significantly lower with CBCT reconstruction. For the high level of experience group, angulation errors were significantly lower than the accepted limit for the three bonding methods. For every tooth, using the panoramic reconstruction from CBCT as a reference, was the most accurate method, regardless of the level of experience. More experienced practitioners made fewer errors for the three methods. CONCLUSIONS: Panoramic reconstruction from CBCT is the most accurate method to limit angulation errors during direct bonding. Conventional panoramic radiography remains a reliable tool if used with caution. Bonding without any radiographic reference should be avoided especially for less experienced practitioners.

Effect of fence tray matching care on excess adhesive and bracket placement accuracy for orthodontic bonding: an in vitro study.

OBJECTIVE: This study aimed to evaluate the effect of fence tray matching care (FTMC) in bracket bonding by measuring excess adhesive, as well as linear and angular deviations, and by comparing it with the half-wrapped tray (HWT). MATERIALS AND METHODS: An intraoral scanner was used to acquire data on the maxillary dental arch of a patient with periodontitis.Furthermore, 20 maxillary dental arch models were 3D printed. Using 3Shape, PlastyCAD software, and 3D printing technology, 10 FTMC (method I) and HWT (method II) were obtained. By preoperative preparation, intraoperative coordination, and postoperative measurement, the brackets were transferred from the trays to the 3D-printed maxillary dental arch models. Additionally, the bracket's excess adhesive as well as linear and angular deviations were measured, and the differences between the two methods were analyzed. RESULTS: Excess adhesive was observed in both methods, with FTMC showing less adhesive (P< 0.001), with a statistical difference. Furthermore, HWT's vertical, tip and torque, which was significantly greater than FTMC (P< 0.05), with no statistical difference among other respects. The study data of incisors, canines, and premolars, showed that the premolars had more adhesive residue and were more likely to have linear and angular deviations. CONCLUSIONS: The FTMC had higher bracket bonding effect in comparison to HWT, and the adhesive residue, linear and angular deviations are smaller. The fence tray offers an intuitive view of the precise bonding of the bracket, and can remove excess adhesive to prevent white spot lesions via care, providing a different bonding method for clinical applications.

A prospective randomized controlled clinical trial investigating the efficacy of low-dose olanzapine in preventing nausea and vomiting associated with oxaliplatin-based and irinotecan-based chemotherapy.

OBJECTIVE: The aim of this study is to assess the clinical efficacy of a 5 mg dosage of olanzapine in preventing chemotherapy-induced nausea and vomiting (CINV) associated with moderately emetogenic chemotherapy (MEC) among female patients diagnosed with gastrointestinal tract tumors. METHODS: Patients undergoing the oxaliplatin/irinotecan chemotherapy regimen were enrolled in this prospective controlled study. The olanzapine group received a 5 mg dosage of olanzapine along with palonosetron and dexamethasone, while the control group received a standard two-combination regimen consisting of dexamethasone and palonosetron. The primary endpoints included the total protection (TP) rates for the entire age group and the subgroup aged 60 years and above. Secondary endpoints encompassed the total protection rates during the acute and delayed phases within the two age brackets, as well as the total control (TC) rates and complete remission (CR) rates across all three phases (total, acute, and delayed). Additionally, the study involved the assessment of quality of life and the collection of adverse events associated with the interventions. RESULTS: 1) Regarding the primary endpoint, the total phase TP rates within both the entire age group and the age group exceeding 60 years demonstrated superiority in the olanzapine group when compared to the control group (66.7% vs 37.25%, P = 0.003; 68.8% vs 44.4%, P = 0.044). 2) In terms of secondary endpoints, the olanzapine group exhibited superior acute phase TP rates in both age brackets when compared to the control group (P < 0.05). The olanzapine group also demonstrated higher delayed-phase TP rates, TC rates across all three phases, and CR rates within the two age brackets, although the differences were not statistically significant (P > 0.05). Furthermore, the quality of life in the olanzapine group surpassed that of the control group for both age brackets (P < 0.05), characterized by enhanced appetite and a higher incidence of drowsiness in the patients treated with olanzapine when compared to those in the control group (P < 0.05). CONCLUSION: Olanzapine can enhance CINV induced by MEC regimen in female patients across all age groups, including the elderly, and therefore improve the quality of life for these patients. CLINICAL TRIAL REGISTRATION: https://www.chictr.org.cn/index.html , identifier: ChiCTR20000368269, 25/08/2020.

Corrigendum: The possibility of clinical bonding between metal/ceramic brackets to zirconia: in vitro study.

[This corrects the article DOI: 10.3389/fbioe.2024.1354241.].

The Impact of the COVID-19 Pandemic on Orthodontic Adult Patients' Characteristics and Decision on Orthodontic Appliance.

Purpose: There is an overall paucity of data examining the specific details of orthodontic patients' patterns or orthodontic service disruptions possibly influenced by COVID-19 pandemic. Therefore, this study aimed to explore the impact of the COVID-19 pandemic on orthodontic clinic disruption regarding the change in adult patients' characteristics and decisions of orthodontic treatment devices. Patients and Methods: A retrospective sample of 311 patients receiving orthodontic treatment from 2018 to 2022 were collected and divided into two groups: before (n = 167) and during (n = 144) the COVID-19 pandemic. Demographics, dental indices, the index of complexity outcome and need (ICON), and the degree of treatment difficulty were analyzed. Results: There were fewer students among patients during the COVID-19 pandemic than before (24.5% versus 35.9%, P = 0.036). Compared with patients before the pandemic, more patients selected ceramic brackets or Invisalign during the pandemic (P = 0.022). There were higher percentage of class I dental malocclusions among patients during than before the COVID-19 pandemic (P = 0.044). Moreover, the ICON score and the score of the degree of treatment difficulty were both significantly lower for patients during than before the COVID-19 pandemic (63.9±14.0 versus 58.3±15.3, P=0.001 and 7.4±2.6 versus 6.8±2.6, P=0.049, respectively). Conclusion: The COVID-19 pandemic influenced the characteristics and decisions of orthodontic patients. Those who still came to the orthodontic clinic despite the COVID-19 outbreak may have been those with less malocclusion severity and treatment difficulty. Besides, during the time of covid-19 pandemic, more patients chose ceramic bracket and Invisalign as their orthodontic treatment device rather than conventional or self-ligating metal brackets.

The orthodontic treatment and the periodontal status of patients.

OBJECTIVE: Aim: To review and analyze modern professional literature on the impact of orthodontic treatment of maxillofacial anomalies on the periodontal status of patients, in particular, the subsiqent pathogenetic mechanisms of the development of periodontal diseases in this category of patients. PATIENTS AND METHODS: Materials and Methods: Bibliometric and analytical methods were used data from international scientific sources in the field of studying the impact of orthodontic treatment on the state of periodontal tissues were used. Conclusions: Patients undergoing orthodontic treatment need the increased attention to the state of periodontal tissues and regular high-quality both professional and individual oral hygiene. A comprehensive approach to treatment and preventive measures for periodontal diseases, taking into account all pathogenetic links of their development in this category of patients, aims not only to keep the periodontium healthy, but also to ensure successful completion of orthodontic treatment. Taking into account consideration the periodontal status of patients allows individual correction of the treatment plan to increase its clinical effectiveness both in the early and in the long term.