Nickel-Catalyzed Regio- and Enantioselective Migratory Hydrocyanation of Internal Alkenes: Expanding the Scope to α,ω-Diaryl Internal Alkenes.

Metal-hydride-catalyzed migratory functionalization of alkenes witnessed extensive development in the past few years. However, the asymmetric version of this reaction has remained largely underdeveloped owing to the difficulty in simultaneous control of both regio- and stereoselectivity. In addition, exploring the wider alkene substrate scope to enable more synthetically valuable applications represents another challenge in this field. In this context, a nickel-catalyzed asymmetric hydrocyanation of internal alkenes involving a chain-walking process is demonstrated. The reaction exhibits excellent regio- and enantioselectivity, proceeds under mild reaction conditions, and delivers benzylic nitriles in high yields. Even α,ω-diaryl internal alkenes, which are known to be one of the most challenging substrates of this type, could be successfully converted to the desired products with good regio- and stereoselectivity by modifying the electronic and steric effects. Theoretical calculations suggest that the η3-benzyl coordination mode and the aryl substituent (3,5-(OMe)2C6H3) on the diphosphite ligand are both key factors in regulating regio- and enantioselectivity.

Ambient Catalytic Spinning of Polyethylene Nanofibers.

A novel single-atom Ni(II) catalyst (Ni-OH) is covalently immobilized onto the nano-channels of mesoporous Santa Barbara Amorphous (SBA)-15 particles and isotropic Anodized Aluminum Oxide (AAO) membrane for confined-space ethylene extrusion polymerization. The presence of surface-tethered Ni complexes (Ni@SBA-15 and Ni@AAO) is confirmed by the inductively coupled plasma-optical emission spectrometry (ICP-OES) and X-ray photoelectron spectroscopy (XPS). In the catalytic spinning process, the produced PE materials exhibit very homogeneous fibrous morphology at nanoscale (diameter: ~50 nm). The synthesized PE nanofibers extrude in a highly oriented manner from the nano-reactors at ambient temperature. Remarkably high Mw (1.62×106  g mol-1 ), melting point (124 °C), and crystallinity (41.8 %) are observed among PE samples thanks to the confined-space polymerization. The chain-walking behavior of surface tethered Ni catalysts is greatly limited by the confinement inside the nano-channels, leading to the formation of very low-branched PE materials (13.6/1000 C). Due to fixed supported catalytic topology and room temperature, the filaments are expected to be free of entanglement. This work signifies an important step towards the realization of a continuous mild catalytic-spinning (CATSPIN) process, where the polymer is directly synthesized into fiber shape at negligible chain branching and elegantly avoiding common limitations like thermal degradation or molecular entanglement.

Unlocking the Chain-Walking Process in Gold Catalysis.

The successful realization of gold-catalyzed chain-walking reactions, facilitated by ligand-enabled Au(I)/Au(III) redox catalysis, has been reported for the first time. This breakthrough has led to the development of gold-catalyzed annulation reaction of alkenes with iodoarenes by leveraging the interplay of chain-walking and π-activation reactivity mode. The reaction mechanism has been elucidated through comprehensive experimental and computational studies.

Iridium-Catalyzed Remote Site-Switchable Hydroarylation of Alkenes Controlled by Ligands.

An iridium-catalyzed remote site-switchable hydroarylation of alkenes was reported, delivering the products functionalized at the subterminal methylene and terminal methyl positions on an alkyl chain controlled by two different ligands, respectively, in good yields and with good to excellent site-selectivities. The catalytic system showed good functional group tolerance and a broad substrate scope, including unactivated and activated alkenes. More importantly, the regioconvergent transformations of mixtures of isomeric alkenes were also successfully realized. The results of the mechanistic studies demonstrate that the reaction undergoes a chain-walking process to give an [Ar-Ir-H] complex of terminal alkene. The subsequent processes proceed through the modified Chalk-Harrod-type mechanism via the migratory insertion of terminal alkene into the Ir-C bond followed by C-H reductive elimination to afford the hydrofunctionalization products site-selectively.

Enantioselective Palladium-Catalyzed Directed Migratory Allylation of Remote Dienes.

Chain walking has been an efficient route to realize the functionalization of inert C(sp3 )-H bonds, but this strategy is limited to mono-olefin migration and functionalization. Herein, we demonstrate the feasibility of tandem directed simultaneous migrations of remote olefins and stereoselective allylation for the first time. The adoption of palladium hydride catalysis and secondary amine morpholine as solvent is critical for achieving high substrate compatibility and stereochemical control with this method. The protocol is also applicable to the functionalization of three vicinal C(sp3 )-H bonds and thus construct three continuous stereocenters along a propylidene moiety via a short synthetic process. Preliminary mechanistic experiments corroborated the design of simultaneous walking of remote dienes.

Cobalt-Catalyzed Asymmetric Remote Borylation of Alkyl Halides.

Enantioselective functionalization of racemic alkyl halides is an efficient strategy to assemble complex chiral molecules, but remains one of the biggest challenges in organic chemistry. The distant and selective activation of unreactive C-H bonds in alkyl halides has received growing interest as it enables rapid generation of molecular complexity from simple building blocks. Here, we reported a cobalt-catalyzed remote borylation of alkyl (pseudo)halides (alkyl-X, X=I, Br, Cl, OTs) with pinacolborane (HBpin) and presented a robust approach for the generation of valuable chiral secondary organoboronates from racemic alkyl halides. This migration borylation reaction is compatible with primary, secondary, and tertiary bromides, offering direct access to a broad range of alkylboronates. The extension of this catalytic system to the borylation of aryl halides was also demonstrated. Preliminary mechanistic studies revealed that this remote borylation involved a radical reaction pathway.

Chain Walking in the AlCl3 Catalyzed Cationic Polymerization of α-Olefins.

Continuing efforts aimed at performing the 1-decene polymerization to low viscosity polyalphaolefins (PAO)s using a less hazardous AlCl3 catalyst than boron-based analogs, the basic mechanisms of this system were revealed in this research. In this aspect, neat AlCl3 and AlCl3 /toluene were carried out to perform 1-decene polymerizations. Microstructure analyses of the as-synthesized oils revealed low molecular weight (708 vs. 1529 g/mol), kinematic viscosity (KV100 =6.4 vs. 22.2 cSt), and long chain branching (82.1 vs. 84.7) of PAO from the system containing toluene solvent. Furthermore, NMR analysis confirmed various types of short chain branch (SCB) with the inclusion of toluene ring in the structure of final PAO chains. Then, to shed light on the basic mechanisms of cationic polymerization of 1-decene including: i) chain initiation, ii) chain transfer to the monomer, iii) isomerization of the carbocation via a chain walking mechanism (causes different SCB length), and iv) binding of toluene ring to the propagating PAO chain (to yield aromatic containing oligomers), molecular modeling at the DFT level was employed. The energies obtained confirmed the ease of carbocation isomerization and chain transfer mechanisms in toluene medium, which well confirms the highly branched structure experimentally obtained for related PAO.

Rhodium-Catalyzed Remote Borylation of Alkynes and Vinylboronates.

Remote functionalization involving a fascinating chain-walking process has emerged as a powerful strategy for the rapid access to value-added functional molecules from readily available feedstocks. However, the scope of current methods is predominantly limited to mono- and di-substituted alkenes. The remote functionalization of multi- and heteroatom-substituted alkenes is challenging, and the use of alkynes in the chain walking is unexplored. We herein report a rhodium catalyzed remote borylation of internal alkynes, offering an unprecedented reaction mode of alkynes for the preparation of synthetically valuable 1,n-diboronates. The regioselective distal migratory hydroboration of sterically hindered tri- and tetra-substituted vinylboronates is also demonstrated to furnish various multi-boronic esters. Synthetic utilities are highlighted through the selective manipulation of the two boryl groups in products such as the regioselective cross coupling, oxidation, and amination.

Rhodium(III)-Catalyzed Remote Hydroamidation of Internal Alkenes via Chain Walking.

Hydroamination of terminal alkenes represents a powerful and well-established way to introduce nitrogenous functionality to feedstock chemicals. Remote hydroamination reactions are far less known, and represent a way to functionalize unactivated C(sp3) centers distal to the site of the alkene. These transformations commonly take place via metal hydride-mediated chain walking, and as such, regioselectivity can be challenging. The remote introduction of amides is of particular interest due to their prevalence in pharmaceuticals. Herein we report a Rh(III)-catalyzed hydroamidation procedure to functionalize the terminal position of internal alkenes, using dioxazolones as amidation reagents and i-PrOH as a hydride source. The reaction proceeds with high yield and regioselectivity, and tolerates a variety of functionality. Regioconvergent synthesis of a single linear amide from a mixture of isomeric alkenes is demonstrated. Key to the development of this reaction was determining that inorganic bases poison the catalyst, and identifying a suitable trialkylamine replacement.

Orthogonal Access to α-/ß-Branched/Linear Aliphatic Amines by Catalyst-Tuned Regiodivergent Hydroalkylations.

Linear, α-branched, and ß-branched aliphatic amines are widespread in pharmaceuticals, agrochemicals, and fine chemicals. Thus, the development of direct and efficient methods to these structures in a tunable manner is highly desirable yet challenging. Herein, a catalyst-controlled synthesis of α-branched, ß-branched and linear aliphatic amines from Ni/Co-catalyzed regio- and site-selective hydroalkylations of alkenyl amines with alkyl halides is developed. This catalytic protocol features the reliable prediction and control of the coupling position of alkylation to provide orthogonal access to α-branched, ß-branched and linear alkyl amines from identical starting materials. This platform unlocks orthogonal reactivity and selectivity of nickel hydride and cobalt hydride chemistry to catalytically repurpose three types of alkyl amines under mild conditions.

Nickel-Catalyzed Switchable Site-Selective Alkene Hydroalkylation by Temperature Regulation.

Regiodivergent alkene functionalization that produces either regioisomer starting from the same raw materials is desirable. Herein, we report a nickel-catalyzed switchable site-selective alkene hydroalkylation. The selection of reaction temperatures leads to protocols that provide regiodivergent hydroalkylated products starting from a single alkene substrate. This protocol allows the convenient synthesis of α- and ß-branched protected amines, both of which are important to the fields of pharmaceutical chemistry and biochemistry. In addition, enantioenriched ß-branched alkylamines can be accessed in a catalytic asymmetric variant. Preliminary mechanistic studies indicate that the formation of a more stable nickelacycle provides the driving force of migration. The thermodynamic and kinetic properties of different reduction elimination intermediates are responsible for the switchable site-selectivity.

Ligand-Controlled NiH-Catalyzed Regiodivergent Chain-Walking Hydroalkylation of Alkenes.

A NiH-catalyzed migratory hydroalkylation of alkenyl amines with predictable and switchable regioselectivity is reported. By utilizing a ligand-controlled, directing group-assisted strategy, various alkyl units are site-selectively installed at inert sp3 C-H sites far away from the original C=C bonds. A range of structurally diverse α- and ß-branched protected amines are conveniently synthesized via stabilization of 5- and 6-membered nickelacycles respectively. This method exhibits broad scope and high functional group tolerance, and can be applied to late-stage modification of medicinally relevant molecules.

A Single Bioinspired Hexameric Nickel Catechol-Alloxazine Catalyst Combines Metal and Radical Mechanisms for Alkene Hydrosilylation.

Mechanisms combining organic radicals and metallic intermediates hold strong potential in homogeneous catalysis. Such activation modes require careful optimization of two interconnected processes: one for the generation of radicals and one for their productive integration towards the final product. We report that a bioinspired polymetallic nickel complex can combine ligand- and metal-centered reactivities to perform fast hydrosilylation of alkenes under mild conditions through an unusual dual radical- and metal-based mechanism. This earth-abundant polymetallic complex incorporating a catechol-alloxazine motif as redox-active ligand operates at low catalyst loading (0.25 mol%) and generates silyl radicals and a nickel-hydride intermediate through a hydrogen atom transfer (HAT) step. Evidence of an isomerization sequence enabling terminal hydrosilylation of internal alkenes points towards the involvement of the nickel-hydride species in chain walking. This single catalyst promotes a hybrid pathway by combining synergistically ligand and metal participation in both inner- and outer- sphere processes.

Remote Site-Selective Asymmetric Protoboration of Unactivated Alkenes Enabled by Bimetallic Relay Catalysis.

A remote C(sp3 )-H bond asymmetric borylation of unactivated alkenes was achieved by bimetallic relay catalysis. The reaction proceeded through reversible and consecutive ß-H elimination/olefin insertion promoted by CoH species generated in situ, followed by copper-catalyzed asymmetric protoboration. The use of this synergistic Co/Cu catalysis protocol allowed the enantioselective protoboration of various unactivated terminal alkenes and internal alkenes, as well as an unrefined mixture of olefin isomers, at the distal less-reactive ß-position to a functional group, leading to chiral organoboronates.

Rh-Catalyzed Coupling of Aldehydes with Allylboronates Enables Facile Access to Ketones.

We present herein a novel strategy for the preparation of ketones from aldehydes and allylic boronic esters. This reaction involves the allylation of aldehydes with allylic boronic esters and the Rh-catalyzed chain-walking of homoallylic alcohols. The key to this successful development is the protodeboronation of alkenyl borylether intermediate via a tetravalent borate anion species in the presence of KHF2 and MeOH. This approach features mild reaction conditions, broad substrate scope, and excellent functional group tolerance. Mechanistic studies also supported that the tandem allylation and chain-walking process were involved.

Remote Arylative Substitution of Alkenes Possessing an Acetoxy Group via ß-Acetoxy Elimination.

Palladium-catalyzed remote arylative substitution was achieved for the reaction of arylboronic acids with alkenes possessing a distant acetoxy group to provide arylation products having an alkene moiety at the remote position. The use of ß-acetoxy elimination as a key step in the catalytic cycle allowed for regioselective formation of unstabilized alkenes after chain walking. This reaction was applicable to various arylboronic acids as well as alkene substrates.

sp3 Bis-Organometallic Reagents via Catalytic 1,1-Difunctionalization of Unactivated Olefins.

A catalytic 1,1-difunctionalization of unactivated olefins en route to sp3 bis-organometallic B,B(Si)-reagents is described. The protocol is characterized by exceptional reaction rates, mild conditions, wide scope, and exquisite selectivity pattern, constituting a new platform to access sp3 bis-organometallics.

Stereoselective Remote Functionalization via Palladium-Catalyzed Redox-Relay Heck Methodologies.

Exploration of novel, three-dimensional chemical space is of growing interest in the drug discovery community and with this comes the challenge for synthetic chemists to devise new stereoselective methods to introduce chirality in a rapid and efficient manner. This Minireview provides a timely summary of the development of palladium-catalyzed asymmetric redox-relay Heck-type processes. These reactions represent an important class of transformation for the selective introduction of remote stereocenters, and have risen to prominence over the past decade. Within this Minireview, the vast scope of these transformations will be showcased, alongside applications to pharmaceutically relevant chiral building blocks and drug substances. To complement this overview, a mechanistic summary and discussion of the current limitations of the transformation are presented, followed by an outlook on future areas of investigation.

Nickel-Catalyzed Migratory Hydrocyanation of Internal Alkenes: Unexpected Diastereomeric-Ligand-Controlled Regiodivergence.

A regiodivergent nickel-catalyzed hydrocyanation of a broad range of internal alkenes involving a chain-walking process is reported. When appropriate diastereomeric biaryl diphosphite ligands are applied, the same starting materials can be converted to either linear or branched nitriles with good yields and high regioselectivities. DFT calculations suggested that the catalyst architecture determines the regioselectivity by modulating electronic and steric interactions. In addition, moderate enantioselectivities were observed when branched nitriles were produced.

Switching the Reactivity of Palladium Diimines with "Ancillary" Ligand to Select between Olefin Polymerization, Branching Regulation, or Olefin Isomerization.

Coordinating solvents are commonly employed as ancillary ligands to stabilize late transition metal complexes and are conventionally considered to have little effect on the reaction products. Our work identifies that the presence of ancillary ligand in Pd-diimine catalyzed polymerizations of α-olefins can drastically alter reactivity. The addition of different amounts of acetonitrile allows for switching between distinct reaction modes: isomerization-polymerization with high branching (0 equiv.), regular chain-walking polymerization (1 equiv.), and alkene isomerization with no polymerization (>20 equiv.). Optimization of the isomerization reaction mode led to a general set of conditions to switch a wide variety of diimine complexes into efficient alkene isomerization catalysts, with catalyst loading as low as 0.005 mol %.