How Domain Segregation in Ionic Liquids Stabilizes Nanoparticles and Establishes Long-Range Ordering─A Computational Study.

Due to their physical properties including high thermal stability, very low vapor pressure, and high microwave absorption, ionic liquids have attracted great attention as solvents for the synthesis of nanomaterials, being considered as greener alternatives to traditional solvents. While usual solvents often need additives like surfactants, polymers, or other ligands to avoid nanoparticle coalescence, some ionic liquids can stabilize nanoparticles in dispersion without any additive. In order to quantify how the ionic liquids can affect both the aggregation thermodynamics and kinetics, molecular dynamics simulations were performed to simulate the evolution of concentrated dispersions and to compute the potential of mean force between nanoparticles of both hydrophilic and hydrophobic natures in two imidazolium-based ionic liquids, which differ from each other by the length of the cation alkyl group. Depending on the nature of the nanoparticle, structured layers of the polar and apolar regions of the ionic liquid can be formed close to its surface, and those layers lead to activation barriers for dispersed particles to get in contact. If the alkyl group of the ionic liquid is long enough to lead to domain segregation between the ionic and apolar portions of the solvent, the layered structure around the particle becomes more structured and propagates several nanometers away from its surface. This leads to stronger barriers close to the contact and also multiple barriers at larger distances that result from the unfavorable superposition of solvent layers of opposing nature when the nanoparticles approach each other. Those long-range solvent-mediated forces not only provide kinetic stability to dispersions but also affect their dynamics and lead to a long-range ordering between dispersed particles that can be explored as a template for the synthesis of complex materials.

Cationic Imidazolium-Urethane-Based Poly(Ionic Liquids) Membranes for Enhanced CO2/CH4 Separation: Synthesis, Characterization, and Performance Evaluation.

The escalating emissions of CO2 into the atmosphere require the urgent development of technologies aimed at mitigating environmental impacts. Among these, aqueous amine solutions and polymeric membranes, such as cellulose acetate and polyimide are commercial technologies requiring improvement or substitution to enhance the economic and energetic efficiency of CO2 separation processes. Ionic liquids and poly(ionic liquids) (PILs) are candidates to replace conventional CO2 separation technologies. PILs are a class of materials capable of combining the favorable gas affinity exhibited by ionic liquids (ILs) with the processability inherent in polymeric materials. In this context, the synthesis of the IL GLYMIM[Cl] was performed, followed by ion exchange processes to achieve GLYMIM variants with diverse counter anions (NTf2-, PF6-, and BF4). Subsequently, PIL membranes were fabricated from these tailored ILs and subjected to characterization, employing techniques such as SEC, FTIR, DSC, TGA, DMA, FEG-SEM, and CO2 sorption analysis using the pressure decay method. Furthermore, permeability and ideal selectivity assessments of CO2/CH4 mixture were performed to derive the diffusion and solubility coefficients for both CO2 and CH4. PIL membranes exhibited adequate thermal and mechanical properties. The PIL-BF4 demonstrated CO2 sorption capacities of 33.5 mg CO2/g at 1 bar and 104.8 mg CO2/g at 10 bar. Furthermore, the PIL-BF4 membrane exhibited permeability and ideal (CO2/CH4) selectivity values of 41 barrer and 44, respectively, surpassing those of a commercial cellulose acetate membrane as reported in the existing literature. This study underscores the potential of PIL-based membranes as promising candidates for enhanced CO2 capture technologies.

Application of Stemphylium lycopersici Extracts Immobilized on MCM-48type Mesoporous Materials as Biocatalysts for Monoacylglycerol Production.

Monoacylglycerols are eco-friendly and inexpensive emulsifiers with a range of applications. The traditional synthetic route is not eco-friendly, while enzymatic catalysis offers milder reaction conditions and higher selectivity. However, its application still is limited due to the costs. In this context, endophytic fungi can be source to new biocatalysts with enhanced catalytic activity. Based on this perspective, the aim of this study was perform the synthesis of MAG's through transesterification reactions of solketal and different vinyl esters, using crude and immobilized lipolytic extracts from the endophytic fungi Stemphylium lycopersici, isolated from Humiria balsamifera. The reactions were conducted using 100 mg of biocatalyst, 1 mmol of substrates, 9 : 1 n-heptane/acetone, at 40 °C, 200 rpm for 96 h. In the reactions using the ILE and stearate, laureate and decanoate vinyl esters it was possible to obtain the correspondent products with conversion rates of 52-75 %. Also, according to the structure drivers used in MCM-48 synthesis, different morphologies and conversions rates were observed. Employing [C16MI] Cl, [C14MI] Cl and [C4MI] Cl, the 1-lauroyl- glycerol conversion was 36 %, 79 % and 44 %, respectively. This is the first work involving the immobilization of an endophytic fungi and its utilization as a biocatalyst in the production of MAG's.

CO2 capture using silica-immobilized dicationic ionic liquids with magnetic and non-magnetic properties.

The need to find alternative materials to replace aqueous amine solutions for the capture of CO2 in post-combustion technologies is pressing. This study assesses the CO2 sorption capacity and CO2/N2 selectivity of three dicationic ionic liquids with distinct anions immobilized in commercial mesoporous silica support (SBA- 15). The samples were characterized by UART-FTIR, NMR, Raman, FESEM, TEM, TGA, Magnetometry (VSM), BET and BJH. The highest CO2 sorption capacity and CO2/N2 selectivity were obtained for sample SBA@DIL_2FeCl4 [at 1 bar and 25 °C; 57.31 (±0.02) mg CO2/g; 12.27 (±0.72) mg CO2/g]. The results were compared to pristine SBA-15 and revealed a similar sorption capacity, indicating that the IL has no impact on the CO2 sorption capacity of silica. On the other hand, selectivity was improved by approximately 3.8 times, demonstrating the affinity of the ionic liquid for the CO2 molecule. The material underwent multiple sorption/desorption cycles and proved to be stable and a promising option for use in industrial CO2 capture processes.

Tailor-made solvents for microbial carotenoids recovery.

In recent years, microbial carotenoids have emerged as a promising alternative for the pharmaceutical and food industries, particularly in promoting human health due to their potent antioxidant and antimicrobial properties. Microbial carotenoids, particularly those produced by yeast, bacteria, and microalgae, are synthesized intracellularly, requiring the use of solvents for their effective extraction and recovery. The conventional use of toxic volatile organic solvents (VOCs) like hexane, petroleum ether, and dimethyl sulfoxide in the extraction of microbial carotenoids has been common. However, ongoing research is introducing innovative, non-toxic, environmentally friendly tailor-made solvents, such as ionic liquids (IL) and deep eutectic solvents (DES), indicating a new era of cleaner and biocompatible technologies. This review aims to highlight recent advancements in utilizing IL and DES for obtaining carotenoids from microorganisms. Additionally, we explore the utilization of in silico tools designed to determine the solubilities of microbial carotenoids in tailor-made DES and ILs. This presents a promising alternative for the scientific community, potentially reducing the need for extensive experimental screening of solvents for the recovery of microbial carotenoids in the separation processing. According to our expert perspective, both IL and DES exhibit a plethora of exceptional attributes for the recovery of microbial carotenoids. Nevertheless, the current employment of these solvents for recovery of carotenoids is restricted to scientific exploration, as their feasibility for practical application in industrial settings has yet to be conclusively demonstrated. KEY POINTS: • ILs and DES share many tailoring properties for the recovery of microbial carotenoids • The use of ILs and DES for microbial carotenoid extraction remains driven by scientific curiosity. • The economic feasibility of ILs and DES is yet to be demonstrated in industrial applications.

Ionenes as Potential Phase Change Materials with Self-Healing Behavior.

Ionenes are poly(ionic liquids) (PILs) comprising a polymer backbone with ionic groups along the structure. Ionenes as solid-solid phase change materials are a recent research field, and some studies have demonstrated their potential in thermal dissipation into electronic devices. Eight ionenes obtained through Menshutkin reactions were synthesized and characterized. The analysis of the thermal tests allowed understanding of how the thermal properties of the polymers depend on the aliphatic nature of the dihalogenated monomer and the carbon chain length. The TGA studies concluded that the ionenes were thermally stable with T10% above 420 °C. The DSC tests showed that the prepared ionenes presented solid-solid transitions, and no melting temperature was appreciated, which rules out the possibility of solid-liquid transitions. All ionenes were soluble in common polar aprotic solvents. The hydrophilicity of the synthesized ionenes was studied by the contact angle method, and their total surface energy was calculated. Self-healing behavior was preliminarily explored using a selected sample. Our studies show that the prepared ionenes exhibit properties that make them potential candidates for applications as solid-solid phase change materials.

Synthesis of films based on chitosan and protic ionic liquids to be used as wound dressing on the oral mucosa.

Oral mucosal ulcerations expose connective tissue to different pathogens and this can progress to systemic infection. This study aimed to synthesize environmentally-friendly films with chitosan and protic ionic liquids, possessing mucoadhesive properties, activity against opportunistic microorganisms, enhanced malleability and mechanical resistance to be used as a wound dressing on the oral mucosa. Therefore, films with chitosan and 10, 35, and 50 % (wt/wt) of 2-hydroxy diethylammonium lactate, salicylate, and maleate protic ionic liquids were synthesized. Thickness measurements and mechanical properties analysis were performed. In addition, oral mucoadhesion, antimicrobial activity, and cytotoxicity properties were investigated. Results showed that the addition of 35wt% and 50wt% of all kinds of protic ionic liquids tested presented significant improvements in film thickness and mechanical properties. Films based on chitosan and the protic ionic liquid 2-hydroxy diethylammonium salicylate at percentages of 35 and 50wt% exhibited superior mucoadhesive properties, antimicrobial activity on opportunistic microorganisms and an improvement in their flexibility after immersion in synthetic saliva. Cytotoxicity results suggest that all kinds of chitosan/protic ionic liquids films tested are safe for intra-oral use. Therefore, the results of this study indicate that these materials could be good candidates for efficient and environmentally-friendly wound dressing films on the oral mucosa.

Zwitterionic "Solutions" for Reversible CO2 Capture.

The zwitterions resulting from the covalent attachment of 3- or 4-hydroxy benzene to the 1,3-dimethylimidazolium cation represent basic compounds (pKa of 8.68 and 8.99 in aqueous solutions, respectively) that chemisorb in aqueous solutions 0.58 mol/mol of carbon dioxide at 1.3 bar (absolute) and 40 °C. Equimolar amounts of chemisorbed CO2 in these solutions are obtained at 10 bar and 40 °C. Chemisorption takes place through the formation of bicarbonate in the aqueous solution using imidazolium-containing phenolate. CO2 is liberated by simple pressure relief and heating, regenerating the base. The enthalpy of absorption was estimated to be -38 kJ/mol, which is about 30 % lower than the enthalpy of industrially employed aqueous solutions of MDEA (estimated at -53 kJ/mol using the same experimental apparatus). The physisorption of CO2 becomes relevant at higher pressures (>10 bar) in these aqueous solutions. Combined physio- and chemisorption of up to 1.3 mol/mol at 40 bar and 40 °C can be attained with these aqueous zwitterionic solutions that are thermally stable and can be recycled at least 20 times.

From capillaries to microchips, green electrophoretic features for enantiomeric separations: A decade review (2013-2022).

Enantioseparation by the electromigration-based method is well-established and widely discussed in the literature. Electrophoretic strategies have been used to baseline resolve complex enantiomeric mixtures, typically using a selector substance into the background electrolyte (BGE) from capillaries to microchips. Along with developing new materials/substances for enantioseparations, it is the concern about the green analytical chemistry (GAC) principles for method development and application. This review article brings a last decade's update on the publications involving enantioseparation by electrophoresis for capillary and microchip systems. It also brings a critical discussion on GAC principles and new green metrics in the context of developing an enantioseparation method. Chemical and green features of native and modified cyclodextrins are discussed. Still, given the employment of greener substances, ionic liquids and deep-eutectic solvents are highlighted, and some new selectors are proposed. For all the mentioned selectors, green features about their production, application, and disposal are considered. Sample preparation and BGE composition in GAC perspective, as well as greener derivatization possibilities, were also addressed. Therefore, one of the goals of this review is to aid the electrophoretic researchers to look where they have not.

Epoxidized Ionic Liquids as Processing Auxiliaries of Poly(Lactic Acid) Matrix: Influence on the Manufacture, Structural and Physical Properties.

In this study, we set out to modify poly(lactic acid) (PLA) by incorporating epoxidized ionic liquids (ILs) that were specifically designed with imidazolium-NTf2 moieties. First, we synthesized di-, tri- and tetra-epoxidized ILs, which were incorporated into a PLA matrix at 3, 5, and 10 wt% through a melt extrusion process. We investigated the relationship between the structure and properties of the resulting materials in terms of thermal, mechanical, rheological, and surface properties. The results showed the potential of ILs to impact these properties. Notably, the tri- and tetra-epoxidized ILs enhanced the thermal stability of the PLA matrix as well as the crystallinity while reducing the glass transition temperature and melting point, which is promising for reactive extrusion processing. Overall, this research opens new routes for using reactive ILs to improve the processing and properties of PLA polymers.

Synthesis of Ammonium-Based ILs with Different Lengths of Aliphatic Chains and Organic Halogen-Free Anions as Corrosion Inhibitors of API X52 Steel.

In the present work, synthesis and characterization of 15 ionic liquids (ILs) derived from quaternary ammonium and carboxylates were carried out in order to proceed to their evaluation as corrosion inhibitors (CIs) of API X52 steel in 0.5 M HCl. Potentiodynamic tests confirmed the inhibition efficiency (IE) as a function of the chemical configuration of the anion and cation. It was observed that the presence of two carboxylic groups in long linear aliphatic chains reduced the IE, whereas in shorter chains it was increased. Tafel-polarization results revealed the ILs as mixed-type CIs and that the IE was directly proportional to the CI concentration. The compounds with the best IE were 2-amine-benzoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AA]), 3-carboxybut-3-enoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AI]), and dodecanoate of N,N,N-trimethyl-hexadecan-1-ammonium ([THDA+][-AD]) within the 56-84% interval. Furthermore, it was found that the ILs obeyed the Langmuir adsorption isotherm model and inhibited the corrosion of steel through a physicochemical process. Finally, the surface analysis by scanning electron microscopy (SEM) confirmed less steel damage in the presence of CI due to the inhibitor-metal interaction.

Polyphenol Iongel Patches with Antimicrobial, Antioxidant and Anti-Inflammatory Properties.

There is an actual need for developing materials for wound healing applications with anti-inflammatory, antioxidant, or antibacterial properties in order to improve the healing performance. In this work, we report the preparation and characterization of soft and bioactive iongel materials for patches, based on polymeric poly(vinyl alcohol) (PVA) and four ionic liquids containing the cholinium cation and different phenolic acid anions, namely cholinium salicylate ([Ch][Sal]), cholinium gallate ([Ch][Ga]), cholinium vanillate ([Ch][Van]), and cholinium caffeate ([Ch][Caff]). Within the iongels, the phenolic motif in the ionic liquids plays a dual role, acting as a PVA crosslinker and a bioactive compound. The obtained iongels are flexible, elastic, ionic conducting, and thermoreversible materials. Moreover, the iongels demonstrated high biocompatibility, non-hemolytic activity, and non-agglutination in mice blood, which are key-sought material specifications in wound healing applications. All the iongels have shown antibacterial properties, being PVA-[Ch][Sal], the one with higher inhibition halo for Escherichia Coli. The iongels also revealed high values of antioxidant activity due to the presence of the polyphenol, with the PVA-[Ch][Van] iongel having the highest activity. Finally, the iongels show a decrease in NO production in LPS-stimulated macrophages, with the PVA-[Ch][Sal] iongel displaying the best anti-inflammatory activity (>63% at 200 µg/mL).

Thermo- and Photocatalytic Activation of CO2 in Ionic Liquids Nanodomains.

Ionic liquids (ILs) are considered to be potential material devices for CO2 capturing and conversion to energy-adducts. They form a cage (confined-space) around the catalyst providing an ionic nano-container environment which serves as physical-chemical barrier that selectively controls the diffusion of reactants, intermediates, and products to the catalytic active sites via their hydrophobicity and contact ion pairs. Hence, the electronic properties of the catalysts in ILs can be tuned by the proper choice of the IL-cations and anions that strongly influence the residence time/diffusion of the reactants, intermediates, and products in the nano-environment. On the other hand, ILs provide driving force towards photocatalytic redox process to increase the CO2 photoreduction. By combining ILs with the semiconductor, unique solid semiconductor-liquid commodities are generated that can lower the CO2 activation energy barrier by modulating the electronic properties of the semiconductor surface. This mini-review provides a brief overview of the recent advances in IL assisted thermal conversion of CO2 to hydrocarbons, formic acid, methanol, dimethyl carbonate, and cyclic carbonates as well as its photo-conversion to solar fuels.

New water-based nanocapsules of poly(diallyldimethylammonium tetrafluoroborate)/ionic liquid for CO2 capture.

Encapsulated ionic liquids as green solvents for CO2 capture are reported in this work. We present a novel combination of water-based poly(ionic liquid) and imidazolium-based ionic liquids (Emim[X]). Poly(diallyldimethylammonium tetrafluoroborate)/Emim[X] capsules were developed for the first time using Nano Spray Dryer B-90. Capsules were characterized by FTIR, SEM/EDX, TEM, TGA, DSC, CO2 sorption, and CO2/N2 selectivity, CO2 sorption kinetic and recycling were also demonstrated. Comparing the capsules reported in this work, the combination of poly(diallyldimethylammonium tetrafluoroborate) and the ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (P[DADMA]/BF4) showed great potential for CO2 capture and CO2/N2 separation, providing higher results (53.4 mg CO2/g; CO2/N2 selectivity: 4.58).

Direct coupling of fiber-in-tube solid-phase microextraction with tandem mass spectrometry to determine amyloid beta peptides as biomarkers for Alzheimer's disease in cerebrospinal fluid samples.

Current research efforts at neurological diseases have focused on identifying novel biomarkers to aid in diagnosis, to provide accurate prognostic information, and to monitor disease progression. This study presents the direct coupling of fiber-in-tube solid-phase microextraction to tandem mass spectrometry as a reliable method to determine amyloid beta peptides (Aß38, Aß40, and Aß42) as biomarkers for Alzheimer's disease in cerebrospinal fluid (CSF) samples. To obtain the biocompatible fiber-in-tube SPME capillary, a PEEK tube segment was longitudinally packed with fine fibers [nitinol wires coated with a zwitterionic polymeric ionic liquid], to act as selective extraction medium. The fiber-in-tube SPME-MS/MS method integrated analyte extraction/enrichment and sample cleanup (exclusion of interferents) into one step. The method provided lower limits of quantification (LLOQ: 0.2 ng mL-1 for Aß38 and 0.1 ng mL-1 for Aß40 and Aß42), high precision (CV lower than 11.6%), and high accuracy (relative standard deviation lower than 15.1%). This method was successfully applied to determine Aß peptides in CSF samples obtained from AD patients (n = 8) and controls (healthy volunteers, n = 10). Results showed that Aß42 levels in the CSF samples obtained from AD patients were significantly lower compared to healthy controls (p < 0.05). On the basis of the ROC analysis results, the Aß42/Aß40 ratio (AUC = 0.950, p < 0.01; 95%) performed significantly better than Aß42 alone (AUC = 0.913, p < 0.01; 95%) in discriminating between AD patients and healthy controls and presented better diagnostic ability for AD. The novelties of this study are not only related to evaluating Aß peptides as AD biomarkers, but also to demonstrating direct online coupling of fiber-in-tube SPME with MS/MS as a quantitative high-throughput method for bioanalysis.

Microwave-assisted Synthesis of Pharmacologically Active 4-Phenoxyquinolines and their Benzazole-quinoline Hybrids Through SNAr Reaction of 4,7-dichloroquinoline and Phenols Using [bmim][PF6] as a Green Solvent.

BACKGROUND: Quinoline and its derivatives have been shown to display a wide spectrum of biological properties, especially anticancer activity. Particularly, diverse potent anticancer drugs are based on the 4-phenoxyquinoline skeleton, acting as small-molecules VEGR2 and/or c-Met kinase inhibitors. However, the design of new drugs based on these quinoline derivatives remains a challenge. Up till now, all approaches to 4-phenoxyquinoline skeleton construction do not obey any green chemistry principles. AIMS AND OBJECTIVES: Developing a new, and efficient protocol for the synthesis of potentially bioactive 4-phenoxyquinoline derivatives and benzazole-quinoline-quinoline hybrids from commercially available 4,7-dichloroquinoline and phenol derivatives using microwave energy (MW) in the presence of 1-methyl 3-butylimidazolium hexafluorophosphate. METHODS: Neweco-efficient protocol for valuable 7-chloro-4-phenoxyquinolines and their hybrids, which is based on SNAr reaction of 4,7-dichloroquinoline with respective simple phenols and hydroxyaryl- benzazoles under MWenergy in green reaction media, is studied for the first time. RESULTS: We found that among various solvents tested, the ionic liquid 1-methyl 3-butylimidazolium hexafluorophosphate ([bmim][PF6]) favored the SNAr reaction affording phenoxyquinolines in excellent yields (72-82%) in 10 min. The developed protocol allowed to obtain quickly in good yields (48-60%) new diverse benzazole-quinoline hybrids, which are expected to be pharmacologically active. According to the calculated bioactivity scores, new hybrids are potential kinase inhibitors that could be useful in anticancer drug research. CONCLUSION: We developed for the first time a new green, efficient method to prepare potentially bioactive functionalized 7-chloro-4-phenoxyquinolines and benzazole-quinoline molecules. Good to excellent yields of the quinoline products, use of MW irradiation in ([bmim] [PF6] as a green solvent, and short times of reactions are some of the main advantages of this new protocol.

Uses of ionic liquids to obtain bioactive compounds: insights from the main international regulations for technological applications.

Ionic liquids (IL) are innovative alternative solvents to recover bioactive compounds from plant-based sources to replace toxic volatile organic solvents (VOS). ILs are tailored-made solvents with chemical and thermal stabilities, nonvolatile and noninflammable. Although ILs are versatile, cost-effective, and sustainable solutions, the European Commission (EC) has no current regulation to approve extracts obtained with ILs to be applied in foods. Herein, this paper aims to assess the overview of ILs, regulamentation, applications, and its toxic effects, to be used as solvents for extract different bioactive compounds. Studies have suggested novel applications for ILs, such as 1-butyl-3-methylimidazolium bromide, 1-butyl-3-methylimidazolium chloride, 1-butyl-3-methylimidazolium tetrafluoroborate and others, to obtain bioactive compounds, for instance phenolic compounds, lignans, alkaloids, carotenoids, polysaccharides, using modern approaches as ultrasound and microwave-assisted extraction. New IL methods increase the efficiency of recovering target compounds and decrease the extraction time and VOS consumption regarding the traditional techniques. Furthermore, to promote the large-scale use of IL in foods, it is essential to investigate individually the toxicity of each IL used in the extraction processes, aiming to obtain a GRAS stamp, due to the currently lack of regulamentation.

Exploring the behavior of Candida antarctica lipase B in aqueous mixtures of an imidazolium ionic liquid and its surfactant analogue.

The performance of Candida antarctica lipase B (CALB) has been evaluated in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4)/water mixtures in a wide range of molar fractions (χBMIMBF4) with and without 1-dodecyl-3-methylimidazolium tetrafluoroborate (C12-MIMBF4), a surfactant derived from BMIMBF4. The main aim of this work is to evaluate the influence of χBMIMBF4 over micellar aggregates to assess the activity of enzymatic reactions. The investigated reaction corresponds to the hydrolysis of the substrate p-nitrophenyl laureate in each χBMIMBF4. The kinetic study for χBMIMBF4 at around 0.2 proved to be a border point in enzymatic activity. At χBMIMBF4 = 0.1, the lipase activity increases in the presence of C12-MIMBF4. However, at higher concentrations, BMIMBF4 has a negligible effect over the lipase activity. These results suggest specific interactions between water and BMIMBF4 molecules in relation to CALB. This research highlights the superactivity phenomenon driven by the reaction media and the micelle interface. In this interfacial interaction, BMIMBF4 acts directly on the changes induced on the enzyme upon its interaction with the micellar interface. This study opens a green perspective toward the biocatalysis field.

Semi-IPN ionogel based on poly (ionic liquids)/xanthan gum for highly sensitive pressure sensor.

In this paper, a novel ionogel with semi-interpenetrating poly (ionic liquids)/xanthan gum (PIL/XG) polymer network (semi-IPN) was prepared by using a simple one-pot method. The structure and the pressure sensing performance have been systematically investigated. It was found that introducing a low content (0.3-3.1 wt%) of XG significantly promoted the mechanical performance of ionogels with little effect on the ionic conductivity. The optimized PIL/XG containing 2.2 wt% XG exhibited high compression strength (761.0 kPa) and ionic conductivity (0.63 S/m at 25 °C). Such ionogels showed a liner response (0-100 kPa) and high sensitivity value of 6.86 kPa-1 in a capacitive mode. Meanwhile, as a resistive sensor, PIL/XG exhibited a wide response range to dynamic pressure ranges with stable repeatability. Furthermore, this ionogel exhibited excellent bactericidal properties against both gram-positive bacteria and gram-negative bacteria. This research provides a potential approach for developing ionogels based on semi-IPN with pressure-sensitive and anti-bacterial properties.

Ionic liquids vs. ethanol as extraction media of algicidal compounds from mango processing waste.

The race for environmentally-safe pesticides and biocides has been showing solutions ranging from pest-pathologic microorganisms to safer botanical extracts that can be incorporated in several formulations. Often linked to high biological activities, fruit residues can be recovered from food processing factories to obtain complex extracts enriched with several bioactive chemicals. Mango (Mangifera indica) fruits are processed into food products in high volumes across the globe and generate a consistent residue that contains, among others, the xanthonoid mangiferin and the flavonoid hyperoside. Both compounds have been linked to several pharmacological and pesticidal activities, although not yet studied for algicidal applications, a current concern specially for antifouling and harmful algae blooms control products. The challenge lies, however, not only on the degree of activity of the natural compounds, but also on the processes necessary to separate, isolate and formulate the bioactive compounds in order to obtain an effective final product. The solvent choice plays an important part regarding the selectivity of the separation and isolation of the main bioactive compounds from the solid waste matrix. Ethanolic mixtures in water have been consolidated recently as a promising extraction medium for flavonoids and xanthonoids, although hindered by solubility limitations. In this paper, aqueous solutions of ionic liquids (ILs) were tested, screened and optimized using Box-Behnken design and Response Surface Methodology to obtain mangiferin and hyperoside-enriched extracts. Results showed a greater concentration of mangiferin and hyperoside with 1-octyl-3-methylimidazolium chloride ([C8MIm] Cl), when compared to choline acetate and ethanolic extracts using optimized parameters. In terms of sufficiency, solvent selection between ILs and ethanolic extraction media was discussed considering economic and environmental factors. Ethanol/water mango waste extracts were then studied for their activity against Raphidocelis subcapitata microalgae, which showed a higher growth inhibition in comparison to standard solutions of mangiferin and hyperoside, either individually and in a 1:1 mixture. A EC50 value was found in relative low concentrations of mangiferin and hyperoside (0.015 mg L-1) detected in the extract, showcasing a promising approach to the direct use of residuary plant extracts in biocidal formulations.